spin_is_locked() is always false when the platform is
uniprocessor and CONFIG_DEBUG_SPINLOCK is not enabled.
This patch replaces its assertion by assert_spin_locked().
Signed-off-by: NLi Xi <lixi@ddn.com>
Signed-off-by: NJames Simmons <uja.ornl@gmail.com>
Reviewed-on: http://review.whamcloud.com/8144
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4199Reviewed-by: NAlexey Lyashkov <alexey_lyashkov@xyratex.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In llite remove unused declarations, parameters, types, and unused,
get-only, or set-only structure members. Add static and const
qualifiers to declarations where possible.
Signed-off-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/9767
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In some cases, cl_default_mds_easize might be zero, especially for
MDC connected to non-MDT0, then mdc might pack getattr RPC with
zero eadatasize.

If client is trying to access remote striped directory with
zero eadatasize, MDT will not return layout information of the
striped direcotry, which will be mis-regarded as non-striped
directory.

So we should use cl_max_mds_easize if cl_default_mds_easize is zero.
Signed-off-by: Nwang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/9862
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4847Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's not atomic to check the last reference and state of cl_lock
in cl_lock_put(). This can cause a problem that an using lock is
freed, if the process is preempted between atomic_dec_and_test()
and (lock->cll_state == CLS_FREEING).

This problem can be solved by holding a refcount by coh_locks. In
this case, it can be sure that if the lock refcount reaches zero,
nobody else can have any chance to use it again.
Signed-off-by: NJinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/9881
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4558Reviewed-by: NBobi Jam <bobijam@gmail.com>
Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the LL_IOC_LLOOP_INFO ioctl in the lustre lloop
device driver to return an error instead of causing
panics with LASSERT().
Signed-off-by: NBob Glossman <bob.glossman@intel.com>
Reviewed-on: http://review.whamcloud.com/9888
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4863Reviewed-by: NNathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Messages which are printed by ll_dirty_page_discard_warn() should not
be rate limited.  If they are rate limited, some files which may be
corrupted on client eviction will not be reported to the user.

This patch changes the CWARN to a CDEBUG to disable console message
rate limiting for this message.  The dirty page discard warnings are
already limited on a per-file basis by the function vvp_vmpage_error
which calls ll_dirty_page_discard_warn only if the ccc_object's
cob_discard_page_warned == 0.
Signed-off-by: NRyan Haasken <haasken@cray.com>
Reviewed-on: http://review.whamcloud.com/9752
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4799Reviewed-by: NCory Spitz <spitzcor@cray.com>
Reviewed-by: NAnn Koehler <amk@cray.com>
Reviewed-by: NChris Horn <hornc@cray.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

According https://www.kernel.org/doc/Documentation/mutex-design.txt:
- the mutex subsystem is slightly faster and has better scalability
  for contended workloads. In terms of 'ops per CPU cycle', the
  semaphore kernel performed 551 ops/sec per 1% of CPU time used,
  while the mutex kernel performed 3825 ops/sec per 1% of CPU time
  used - it was 6.9 times more efficient.
- there are no fastpath tradeoffs, the mutex fastpath is just as
  tight as the semaphore fastpath. On x86, the locking fastpath is
  2 instructions.
- 'struct mutex' semantics are well-defined and are enforced if
  CONFIG_DEBUG_MUTEXES is turned on. Semaphores on the other hand
  have virtually no debugging code or instrumentation.

One more benefit of mutex is optimistic spinning. It try to spin for
acquisition when there are no pending waiters and the lock owner is
currently running on a (different) CPU. The rationale is that if the
lock owner is running, it is likely to release the lock soon.

This significantly reduce amount of context switches when locked
region is small and we have high contention.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9095
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4257Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's just optimization. The mutex subsystem is slightly faster
and has better scalability for contended workloads.

Remove the lustre_lock and it's accessor functions l_lock(),
l_unlock(), l_lock_init(), and l_has_lock() since they have
not been used by the code since Lustre 1.6.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9294
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4588Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Reviewed-by: NAlex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some CPU table functions for uniprocessor architecture is
missing.
Signed-off-by: NLi Xi <lixi@ddn.com>
Signed-off-by: NJames Simmons <uja.ornl@gmail.com>
Reviewed-on: http://review.whamcloud.com/8873
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4199Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Reviewed-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: NLiang Zhen <liang.zhen@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the nowhere included header lustre/include/ioctl.h.
Signed-off-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/9757
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Reviewed-by: NDmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

lnet_shutdown_lndnis() may enter endless loop if there is a busy NI,
this is injected by LNet SMP improvements. It's fixed in this patch.
Signed-off-by: NLiang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/9706
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4780Reviewed-by: NIsaac Huang <he.huang@intel.com>
Reviewed-by: NBobi Jam <bobijam@gmail.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sscanf format specification '%u' expects type 'unsigned int *'
for 'u', but parameter 3 has a different type 'int*'.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9400
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pointer 'mod' checked for NULL at line 160 may be dereferenced at line 208.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9387
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NFan Yong <fan.yong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pointer '*exp' returned from call to function 'class_conn2export'
at line 523 may be NULL and may be dereferenced at line 543.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9323
ntel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Locate the loh_flags and loh_ref fields together in lu_object_header
to avoid holes and shrink the structure by 8 bytes.
Signed-off-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-on: http://review.whamcloud.com/9185
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3059Reviewed-by: NAlex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: NLiang Zhen <liang.zhen@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We used to access layout version under the protection of ldlm
lock, this introduces extra overhead for dlm lock matching.

In this patch, lli_layout_lock is introduced to access the layout
version. Also, when a layout lock is losing, we should tear down
mmap of the correspoding inode to avoid stale data accessing in the
future.

This is part of technical verification of replication.
Signed-off-by: NJinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/8689
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3254Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Reviewed-by: NBobi Jam <bobijam@gmail.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The statahead debug messages include the pid of the current
process in their body.  This is both redudant (because all
lustre log messages contain the pid), and sometimes downright
misleading.  For instance the messages would say something like
"stopping statahead thread 3446".  One would probably think
that 3446 is the pid of the process that is being stopped,
but in fact it was the pid of the caller issuing the stop signal.

We remove all superfluous pids from the messages.

Next we have the ll_statahead_thread() and the ll_agl_thread() record
their respective pids in their respective ptlrpc_thread structures.
This allows to print the pid of the thread that we are trying to
stop (which is actually useful info) from other threads, such as those
calling ll_stop_statahead().
Signed-off-by: NChristopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/9360
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4624Reviewed-by: NFan Yong <fan.yong@intel.com>
Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The statahead and statahead agl threads blindly set their
thread state to SVC_RUNNING without checking the state first.  If, for
instance, another thread sets the state to SVC_STOPPING that
stop signal will now have been lost.  Deadlock ensues.

We also partly improve the sai reference counting, because a race exists
where the ll_stop_statahead thread can drop the default reference, and
the statahead thread can exit and drop its reference as well.  With no
references on the sai, the final put will poison and free the buffer.  The
original do_statahead_enter() function may then continue to access
the buffer after it is freed because it did not take a reference of its
own.  We add a local reference to address that.
Signed-off-by: NChristopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/9358
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4624Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Reviewed-by: NFan Yong <fan.yong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When allocating a reply buffer for the striping information don't
assume the unlikely worst case.  Instead, assume the common case
and size the buffer based on the observed default ea/cookie size.

The default size is initialized to a single stripe and allowed to
grow up to an entire page if needed.  This means that for smallish
filesystems (less than ~21 OSTs) where the worst case striping
information can fit in a single page there is effectively no
change.  Only for larger filesystem will the default be less than
the maximum.  This has a number of advantages.

* By limiting the default reply buffer size we avoid always
  vmalloc()'ing the buffer because it exceeds four pages in size
  and instead kmalloc() it.  This prevents the client from
  thrashing on the global vmalloc() spin lock.

* A reply buffer of exactly the right size (no larger) is allocated
  in the overflow case.  These larger reply buffers are still
  unlikely to exceed the 16k limit where a vmalloc() will occur.

* Saves memory in the common case.  Wide striped files exceeded
  the default are expected to be the exception.

The reason this patch works is because the ptlrpc layer is smart
enough to reallocate the reply buffer when an overflow occurs.
Therefore the client doesn't have to drop the incoming reply and
send a new request with a larger reply buffer.

It's also worth mentioning that the reply buffer always contains
a significant amount of extra padding because they are rounded up
to the nearest power of two.  This means that even files striped
wider than the default have a good chance of fitting in the
allocated reply buffer.

Also remove client eadatasize check in mdt xattr packing because
as said above client can handle -EOVERFLOW.
Signed-off-by: NBrian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: NLai Siyao <lai.siyao@intel.com>
Reviewed-on: http://review.whamcloud.com/6339
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3338Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Otherwise, it will cause deadlock because it essentially holds
some sub locks and then to request others in an arbitrary order.
Signed-off-by: NJinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/9152Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Reviewed-by: NBobi Jam <bobijam@gmail.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

File write before io loop will take lli_trun_sem read semaphore to
protect osc_extent, while after generic_file_aio_write() done, it
could possible need to kill suid or sgid, which will call
ll_setattr_raw() to change the inode's attribute, and it does not
involve size.

So the ll_truc_sem write semaphore should be constrained
around ll_setattr_ost() to not come across the lli_trunc_sem read
semaphore get from the normal file write path.
Signed-off-by: NBobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/9267
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4627Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The last parameter @datasync of fsync() has following indication:
* if datasync=0, we'd always flush data and metadata
* if datasync=1, we'd always flush data while does not flush modifed
  metadata unless that metadata is needed in order to allow a
  subsequent data retrieval to be correctly handled. For example, a
  change to the file size would require a metadata flush.

Lustre client can not tell the difference easily, and would issue
MDS_SYNC and OST_SYNC in all cases.
Signed-off-by: NBobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/8684
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4388Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Setxattr does not check the permission when setting ACL xattrs. This
will cause security problem because any user can walk around
permission checking by changing ACL rules.
Signed-off-by: NLi Xi <lixi@ddn.com>
Reviewed-on: http://review.whamcloud.com/9473
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4704Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The total size of an HSM archive request may exceed the
desired (LNET) message. When this happens, it can hang
the client and not allow the archive request to succeed.

Before we know the total size of the hsm_action_items, we
need to limit the size of the reguest. Doing this limits
the number of items that can be sent in one archive request.
We'e reduced the size allowed for the user archive request
to MDS_MAXREQSIZE/3.
Signed-off-by: NJames Nunez <james.a.nunez@intel.com>
Reviewed-on: http://review.whamcloud.com/9393
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4639Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If fsname is 8-byte aligned, hai_zero fails to count the ending NULL
terminator causing hai to directly attached after fsname and future
hai_zero will return a different position for first hai.
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Reviewed-on: http://review.whamcloud.com/9431
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4689Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unused function llog_obd_add(). Remove the unused count and
parameters from llog_cancel(). Move dump_lsm() from obdclass to
the only module that uses it (lov). Remove obd_lov.h.
Signed-off-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/8545
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675Reviewed-by: NBobi Jam <bobijam@gmail.com>
Reviewed-by: NMike Pershin <mike.pershin@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unused functions lov_llog_init(), lov_llog_finish(),
their supporting functions, and the file lov_log.c.
Signed-off-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/8539
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NMike Pershin <mike.pershin@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Quiet some common console error messages for permission errors
that can be hit in common cases.
Signed-off-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-on: http://review.whamcloud.com/8988
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4522Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: NFaccini Bruno <bruno.faccini@intel.com>
Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In Lustre 2.4, the flags passed to the memory allocation functions are
translated from CFS enumeration values types to the kernel GFP
values by calling cfs_alloc_flags_to_gfp(). This function adds
__GFP_WAIT to all flags except CFS_ALLOC_ATOMIC. In 2.5, when
the cfs wrappers were dropped, cfs_alloc_flags_to_gfp() was
removed and the CFS_ALLOC_xxxx was simply replaced with __GFP_xxxx.
This means that most memory allocation calls are missing the
__GFP_WAIT flag. The result is that Lustre experiences more ENOMEM
errors, many of which the higher levels of Lustre do not handle
robustly.
Notes GFP_NOFS = __GFP_WAIT | __GFP_IO. So the patch replaces
__GFP_IO with GFP_NOFS.
Patch does not add __GFP_WAIT to GFP_IOFS. GFP_IOFS was not used in
Lustre 2.4 so it has never been used with __GFP_WAIT.
Signed-off-by: NAnn Koehler <amk@cray.com>
Signed-off-by: NEmoly Liu <emoly.liu@intel.com>
Reviewed-on: http://review.whamcloud.com/9223
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4357Reviewed-by: NLiang Zhen <liang.zhen@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add rpc_cache for allocating ptlrpc_requests.

Xyratex-bug-id: MRP-689
Signed-off-by: NAndriy Skulysh <Andriy_Skulysh@xyratex.com>
Signed-off-by: NNiu Yawei <yawei.niu@intel.com>
Reviewed-on: http://review.whamcloud.com/6874
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2424Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Array 'message_buf' of size 500 may use index value(s) -1

Object 'enc_key.data' was freed at line 164 after being freed
by calling 'free' at line 150. Also there are 3 similar errors
on line(s) 164.

Suspicious dereference of pointer 'vmsg' before NULL check at
line 187. Also there are 2 similar errors on line(s) 196, 205.

Suspicious dereference of pointer 'rmsg' before NULL check at
line 191. Also there are 2 similar errors on line(s) 200, 209.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9274
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If a connection has been stopped with ptlrpc_pinger_del_import() and
marked obd_no_recov, don't reconnect in ptlrpc_disconnect_import() if
the import is already disconnected.  Otherwise, without the pinger it
will just wait there indefinitely for the reconnection that will never
happen.

Put the obd_no_recov check inside ptlrpc_import_in_recovery() so that
any threads waiting on the connection to recover would also be broken
out of their sleep if obd_no_recov is set.
Signed-off-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-on: http://review.whamcloud.com/8996
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4413Reviewed-by: NNathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Nwangdi <di.wang@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The LDLM_FL_BLOCK_NOWAIT flag should be cleared when re-enqueue
the agl lock as normal glimpse, otherwise, it won't get size back
if there is conflicting locks on other client.
Signed-off-by: NNiu Yawei <yawei.niu@intel.com>
Reviewed-on: http://review.whamcloud.com/9249
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4597Reviewed-by: NBobi Jam <bobijam@gmail.com>
Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: NNed Bass <bass6@llnl.gov>
Reviewed-by: NFan Yong <fan.yong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves lock's skip flag clearing from lru-delete to
lru-add code to prevent clearing lock's flag without resource lock
protection.
Signed-off-by: NLi Xi <lixi@ddn.com>
Signed-off-by: NBobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/8772
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4269Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

LNET messages that are dropped are not accounted for correctly in
/proc/sys/lnet/stats. What I assume to be a simple typo is causing
drop_length to be double-counted and drop_count to never be
incremented.
Signed-off-by: NMatt Ezell <ezellma@ornl.gov>
Reviewed-on: http://review.whamcloud.com/9096
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4577Reviewed-by: NJames Nunez <james.a.nunez@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@gmail.com>
Reviewed-by: NIsaac Huang <he.huang@intel.com>
Reviewed-by: NLiang Zhen <liang.zhen@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In ptlrpc_activate_import(), obd_import->imp_deactive should
be checked if it is deactivated, otherwise it will trigger an
LBUG in ptlrpc_invalidate_import():

  ptlrpc_invalidate_import() ASSERTION(imp->imp_invalid) failed
Signed-off-by: NHongchao Zhang <hongchao.zhang@intel.com>
Reviewed-on: http://review.whamcloud.com/8747
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4386Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NFan Yong <fan.yong@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Function ptlrpc_update_export_timer generates lots of D_HA level log
messages whenever the export timer gets updated. Those log messages
are found little use for issue investigations, and it will take space
in the Lustre log buffer. We are removing it now.

Xyratex-bug-id: MRP-733
Signed-off-by: NCheng Shao <cheng_shao@xyratex.com>
Reviewed-on: http://review.whamcloud.com/9147
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4590Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre_get_emerg_rs() set the size of the reply buffer to zero
by mistake, which will cause LBUG in null_alloc_rs() when memory
pressure is high. This patch fix this problem and adds a size
check to avoid the problem of insufficient buffer size.
Signed-off-by: NLi Xi <lixi@ddn.com>
Signed-off-by: NPatrick Farrell <paf@cray.com>
Reviewed-on: http://review.whamcloud.com/8200
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3680Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Signed-off-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

_rtw_free_network23a() and _rtw_free_network23a_nolock23a() are now
identical - one copy should do.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>