- 08 9月, 2014 17 次提交
-
-
由 Arun Chandran 提交于
The current soft_restart() and setup_restart implementations incorrectly assume that compiler will not spill/fill values to/from stack. However this assumption seems to be wrong, revealed by the disassembly of the currently existing code (v3.16) built with Linaro GCC 4.9-2014.05. ffffffc000085224 <soft_restart>: ffffffc000085224: a9be7bfd stp x29, x30, [sp,#-32]! ffffffc000085228: 910003fd mov x29, sp ffffffc00008522c: f9000fa0 str x0, [x29,#24] ffffffc000085230: 94003d21 bl ffffffc0000946b4 <setup_mm_for_reboot> ffffffc000085234: 94003b33 bl ffffffc000093f00 <flush_cache_all> ffffffc000085238: 94003dfa bl ffffffc000094a20 <cpu_cache_off> ffffffc00008523c: 94003b31 bl ffffffc000093f00 <flush_cache_all> ffffffc000085240: b0003321 adrp x1, ffffffc0006ea000 <reset_devices> ffffffc000085244: f9400fa0 ldr x0, [x29,#24] ----> spilled addr ffffffc000085248: f942fc22 ldr x2, [x1,#1528] ----> global memstart_addr ffffffc00008524c: f0000061 adrp x1, ffffffc000094000 <__inval_cache_range+0x40> ffffffc000085250: 91290021 add x1, x1, #0xa40 ffffffc000085254: 8b010041 add x1, x2, x1 ffffffc000085258: d2c00802 mov x2, #0x4000000000 // #274877906944 ffffffc00008525c: 8b020021 add x1, x1, x2 ffffffc000085260: d63f0020 blr x1 ... Here the compiler generates memory accesses after the cache is disabled, loading stale values for the spilled value and global variable. As we cannot control when the compiler will access memory we must rewrite the functions in assembly to stash values we need in registers prior to disabling the cache, avoiding the use of memory. Reviewed-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NArun Chandran <achandran@mvista.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
If we cannot relocate the kernel Image to its preferred offset of base of DRAM plus TEXT_OFFSET, instead relocate it to the lowest available 2 MB boundary plus TEXT_OFFSET. We may lose a bit of memory at the low end, but we can still proceed normally otherwise. Acked-by: NMark Salter <msalter@redhat.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NLeif Lindholm <leif.lindholm@linaro.org> Tested-by: NLeif Lindholm <leif.lindholm@linaro.org> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
The static memory footprint of a kernel Image at boot is larger than the Image file itself. Things like .bss data and initial page tables are allocated statically but populated dynamically so their content is not contained in the Image file. However, if EFI (or GRUB) has loaded the Image at precisely the desired offset of base of DRAM + TEXT_OFFSET, the Image will be booted in place, and we have to make sure that the allocation done by the PE/COFF loader is large enough. Fix this by growing the PE/COFF .text section to cover the entire static memory footprint. The part of the section that is not covered by the payload will be zero initialised by the PE/COFF loader. Acked-by: NMark Salter <msalter@redhat.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NLeif Lindholm <leif.lindholm@linaro.org> Tested-by: NLeif Lindholm <leif.lindholm@linaro.org> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Mark Rutland 提交于
In certain cases the cpu-release-addr of a CPU may not fall in the linear mapping (e.g. when the kernel is loaded above this address due to the presence of other images in memory). This is problematic for the spin-table code as it assumes that it can trivially convert a cpu-release-addr to a valid VA in the linear map. This patch modifies the spin-table code to use a temporary cached mapping to write to a given cpu-release-addr, enabling us to support addresses regardless of whether they are covered by the linear mapping. Acked-by: NLeif Lindholm <leif.lindholm@linaro.org> Tested-by: NLeif Lindholm <leif.lindholm@linaro.org> Tested-by: NMark Salter <msalter@redhat.com> Signed-off-by: NMark Rutland <mark.rutland@arm.com> [ardb: added (__force void *) cast] Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
VIPT caches are non-aliasing if the index is derived from address bits that are always equal between VA and PA. Classifying these as aliasing results in unnecessary flushing which may hurt performance. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Ard Biesheuvel 提交于
This adds helper functions and #defines to <asm/cachetype.h> to read the line size and the number of sets from the level 1 instruction cache. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Linus Torvalds 提交于
-
由 Sudip Mukherjee 提交于
new link for - How to piss off a Linux kernel subsystem maintainer Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Bolle 提交于
The NFS/RDMA Kconfig symbol was split into separate options for client and server in commit 2e8c12e1 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support"). Update the documentation to reflect this split. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: "J. Bruce Fields" <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masanari Iida 提交于
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to hpfall.c instead of freefall.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
The example code provided with the i2c device interface documentation won't compile since it uses the reserved word "register" to name a variable. The compiler fails with this error message: error: expected identifier or '(' before '=' token __u8 register = 0x20; /* Device register to access */ ^ Rename the variable "register" to simply "reg" in the example code. Another couple of typos has been fixed as well. [Change "! =" to "!=".] Signed-off-by: NJose Alarcon Roldan <jose.alarcon.roldan@gmail.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rob Jones 提交于
Despite the fact that these functions have been around for years, they are little used (only 15 uses in 13 files at the preseht time) even though many other files use work-arounds to achieve the same result. By documenting them, hopefully they will become more widely used. Signed-off-by: NRob Jones <rob.jones@codethink.co.uk> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI sysfs, ACPI video, suspend test), ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD output, a fix and a new CPU ID for the RAPL driver, new blacklist entry for the ACPI EC driver and a couple of trivial cleanups (intel_pstate and generic PM domains). Specifics: - Fix for recently broken test_suspend= command line argument (Rafael Wysocki). - Fixes for regressions related to the ACPI video driver caused by switching the default to native backlight handling in 3.16 from Hans de Goede. - Fix for a sysfs attribute of ACPI device objects that returns stale values sometimes due to the fact that they are cached instead of executing the appropriate method (_SUN) every time (broken in 3.14). From Yasuaki Ishimatsu. - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the ACPI processor driver from Jiri Kosina. - Runtime output validation for the ACPI _DSD device configuration object missing from the support for it that has been introduced recently. From Mika Westerberg. - Fix for an unuseful and misleading RAPL (Running Average Power Limit) domain detection message in the RAPL driver from Jacob Pan. - New Intel Haswell CPU ID for the RAPL driver from Jason Baron. - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan Tianyu. - Cleanup for the intel_pstate driver and the core generic PM domains code from Gabriele Mazzotta and Geert Uytterhoeven" * tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock ACPI / scan: not cache _SUN value in struct acpi_device_pnp cpufreq: intel_pstate: Remove unneeded variable powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f PM / domains: Make generic_pm_domain.name const PM / sleep: Fix test_suspend= command line option ACPI / EC: Add msi quirk for Clevo W350etq ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull filesystem fixes from Al Viro: "Several bugfixes (all of them -stable fodder). Alexey's one deals with double mutex_lock() in UFS (apparently, nobody has tried to test "ufs: sb mutex merge + mutex_destroy" on something like file creation/removal on ufs). Mine deal with two kinds of umount bugs, in umount propagation and in handling of automounted submounts, both resulting in bogus transient EBUSY from umount" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix deadlocks introduced by sb mutex merge fix EBUSY on umount() from MNT_SHRINKABLE get rid of propagate_umount() mistakenly treating slaves as busy.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU fix from Ingo Molnar: "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Make nocb leader kthreads process pending callbacks after spawning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "Three fixlets from the timer departement: - Update the timekeeper before updating vsyscall and pvclock. This fixes the kvm-clock regression reported by Chris and Paolo. - Use the proper irq work interface from NMI. This fixes the regression reported by Catalin and Dave. - Clarify the compat_nanosleep error handling mechanism to avoid future confusion" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Update timekeeper before updating vsyscall and pvclock compat: nanosleep: Clarify error handling nohz: Restore NMI safe local irq work for local nohz kick
-
由 Alexey Khoroshilov 提交于
Commit 0244756e ("ufs: sb mutex merge + mutex_destroy") introduces deadlocks in ufs_new_inode() and ufs_free_inode(). Most callers of that functions acqure the mutex by themselves and ufs_{new,free}_inode() do that via lock_ufs(), i.e we have an unavoidable double lock. The patch proposes to resolve the issue by making sure that ufs_{new,free}_inode() are not called with the mutex held. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org # 3.16 Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 07 9月, 2014 4 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Paolo Bonzini: "A smattering of bug fixes across most architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm/cma: Fix panic introduces by signed shift operation KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags KVM: s390/mm: Fix storage key corruption during swapping arm/arm64: KVM: Complete WFI/WFE instructions ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU KVM: s390/mm: try a cow on read only pages for key ops KVM: s390: Fix user triggerable bug in dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Kevin Hilman: "Another round of fixes from arm-soc land, which are mostly DT fixes for: - OMAP: handful of DT fixes devices on newly supported hardware - davinci: fix 2nd EDMA channel - ux500: extend previous pinctrl fix to another board - at91: clock registration fixes, compatibility string precision And one more fix for event cleanup in drivers/bus/arm-ccn" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Move event cleanup routine ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency ARM: ux500: disable msp2 node on Snowball ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "The fixes all address recently discovered data corruption issues. The original Direct IO issue was discovered by Chris Mason @ Facebook on a production workload which mixed buffered reads with direct reads and writes IO to the same file. The fix for that exposed other issues with page invalidation (exposed by millions of fsx operations) failing due to dirty buffers beyond EOF. Finally, the collapse_range code could also cause problems due to racing writeback changing the extent map while it was being shifted around. The commits for that problem are simple mitigation fixes that prevent the problem from occuring. A more robust fix for 3.18 that addresses the underlying problem is currently being worked on by Brian. Summary of fixes: - a direct IO read/buffered read data corruption - the associated fallout from the DIO data corruption fix - collapse range bugs that are potential data corruption issues" * tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: trim eofblocks before collapse range xfs: xfs_file_collapse_range is delalloc challenged xfs: don't log inode unless extent shift makes extent modifications xfs: use ranged writeback and invalidation for direct IO xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't dirty buffers beyond EOF
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull mtd fixes from Brian Norris: "Two trivial MTD updates for 3.17-rc4: - a tiny comment tweak, to kill a bunch of DocBook warnings added during the merge window - a small fixup to the OTP routines' error handling" * tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd: mtd: nand: fix DocBook warnings on nand_sdr_timings doc mtd: cfi_cmdset_0002: check return code for get_chip()
-
- 06 9月, 2014 5 次提交
-
-
由 Thomas Gleixner 提交于
The update_walltime() code works on the shadow timekeeper to make the seqcount protected region as short as possible. But that update to the shadow timekeeper does not update all timekeeper fields because it's sufficient to do that once before it becomes life. One of these fields is tkr.base_mono. That stays stale in the shadow timekeeper unless an operation happens which copies the real timekeeper to the shadow. The update function is called after the update calls to vsyscall and pvclock. While not correct, it did not cause any problems because none of the invoked update functions used base_mono. commit cbcf2dd3 (x86: kvm: Make kvm_get_time_and_clockread() nanoseconds based) changed that in the kvm pvclock update function, so the stale mono_base value got used and caused kvm-clock to malfunction. Put the update where it belongs and fix the issue. Reported-by: NChris J Arges <chris.j.arges@canonical.com> Reported-by: NPaolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409050000570.3333@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
The error handling in compat_sys_nanosleep() is correct, but completely non obvious. Document it and restrict it to the -ERESTART_RESTARTBLOCK return value for clarity. Reported-by: NKees Cook <keescook@chromium.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c bugfixes from Wolfram Sang: "I2C driver bugfixes for the 3.17 release. Details can be found in the commit messages, yet I think this is typical driver stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: rcar: remove spinlock" i2c: at91: add bound checking on SMBus block length bytes i2c: rk3x: fix bug that cause transfer fails in master receive mode i2c: at91: Fix a race condition during signal handling in at91_do_twi_xfer. i2c: mv64xxx: continue probe when clock-frequency is missing i2c: rcar: fix MNR interrupt handling
-
git://github.com/at91linux/linux-at91由 Kevin Hilman 提交于
Merge "at91: fixes for 3.17 #1" from Nicols Ferre: First AT91 fixes batch for 3.17: - compatibility string precision - clock registration and USB DT fix for at91rm9200 * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver Signed-off-by: NKevin Hilman <khilman@linaro.org>
-
由 Pawel Moll 提交于
The function cleaning up an initialized event was called from the "event_del" handler, instead of being used as the "destroy" callback. In case of events group allocation this caused NULL pointer dereference (as events are added and deleted multiple times then). Fixed now. Signed-off-by: NPawel Moll <mail@pawelmoll.com> Signed-off-by: NKevin Hilman <khilman@linaro.org>
-
- 05 9月, 2014 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k updates from Geert Uytterhoeven: "Wire up new syscalls getrandom and memfd_create" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up memfd_create m68k: Wire up getrandom
-
由 Alexandre Belloni 提交于
The atmel,clk-divisors property is taking 4 divisors, if less are provided, the clock registration will fail. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
Actually register clocks from device tree when using the common clock framework. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: add at91 to function name] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Gaël PORTAY 提交于
The at91sam9g20 SOC uses its own pllb implementation which is different from the one inherited from at91sam9260 SOC. Signed-off-by: NGaël PORTAY <gael.portay@gmail.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Johannes Weiner 提交于
Dave Hansen reports a massive scalability regression in an uncontained page fault benchmark with more than 30 concurrent threads, which he bisected down to 05b84301 ("mm: memcontrol: use root_mem_cgroup res_counter") and pin-pointed on res_counter spinlock contention. That change relied on the per-cpu charge caches to mostly swallow the res_counter costs, but it's apparent that the caches don't scale yet. Revert memcg back to bypassing res_counters on the root level in order to restore performance for uncontained workloads. Reported-by: NDave Hansen <dave@sr71.net> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Tested-by: NDave Hansen <dave.hansen@intel.com> Acked-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NVladimir Davydov <vdavydov@parallels.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Altaparmakov 提交于
This patch changes sync_filesystem() to be EXPORT_SYMBOL(). The reason this is needed is that starting with 3.15 kernel, due to Theodore Ts'o's commit 02b9984d ("fs: push sync_filesystem() down to the file system's remount_fs()"), all file systems that have dirty data to be written out need to call sync_filesystem() from their ->remount_fs() method when remounting read-only. As this is now a generically required function rather than an internal only function it should be EXPORT_SYMBOL() so that all file systems can call it. Signed-off-by: NAnton Altaparmakov <aia21@cantab.net> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator documentation fixes from Mark Brown: "All the fixes people have found for the regulator API have been documentation fixes, avoiding warnings while building the kerneldoc, fixing some errors in one of the DT bindings documents and fixing some typos in the header" * tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix kernel-doc warnings in header files regulator: Proofread documentation regulator: tps65090: Fix tps65090 typos in example
-
由 Kevin Hilman 提交于
Merge tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.17-rc3" from Tony Lindgren: Few fixes for omaps mostly for various devices to get them working properly on the new am437x and dra7 hardware for several devices such as I2C, NAND, DDR3 and USB. There's also a clock fix for omap3. And also included are two minor cosmetic fixes that are not stictly fixes for the new hardware support added recently to downgrade a GPMC warning into a debug statement, and fix the confusing comments for dra7-evm spi1 mux. Note that these are all .dts changes except for a GPMC change. * tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (255 commits) ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency Linux 3.17-rc3 ... Signed-off-by: NKevin Hilman <khilman@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: - some documentation sync - resource leak in the bt8xx driver - again fix the way varargs are used to handle the optional flags on the gpiod_* accessors. Now hopefully nailed the entire problem. * tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: move varargs hack outside #ifdef GPIOLIB gpio: bt8xx: fix release of managed resources Documentation: gpio: documentation for optional getters functions
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: - i915 fixes: a few display regressions - vmwgfx: possible loop forever fix - nouveau: one userspace interface fix * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/core: don't leak oclass type bits to user drm/i915: Fix lock dropping in intel_tv_detect() drm/i915: handle G45/GM45 pulse detection connected state. drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle drm/vmwgfx: Fix an incorrect OOM return value drm/i915: Remove bogus __init annotation from DMI callbacks drm/i915: don't warn if backlight unexpectedly enabled drm/i915: Move intel_ddi_set_vc_payload_alloc(false) to haswell_crtc_disable() drm/i915: fix plane/cursor handling when runtime suspended drm/i915: Ignore VBT backlight presence check on Acer C720 (4005U)
-
由 Rafael J. Wysocki 提交于
* pm-sleep: PM / sleep: Fix test_suspend= command line option * powercap: powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f * pm-domains: PM / domains: Make generic_pm_domain.name const * pm-cpufreq: cpufreq: intel_pstate: Remove unneeded variable
-
由 Rafael J. Wysocki 提交于
* acpi-video: ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic * acpi-ec: ACPI / EC: Add msi quirk for Clevo W350etq
-
由 Rafael J. Wysocki 提交于
* acpica: ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package. * acpi-processor: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock * acpi-scan: ACPI / scan: not cache _SUN value in struct acpi_device_pnp
-
由 Mark Brown 提交于
Merge remote-tracking branches 'regulator/fix/doc' and 'regulator/fix/tps65090' into regulator-linus
-