We want to reduce the impact that each of the builtins has on perf as a
whole, so use the superclassing of perf_tool mechanizm to move its
config knobs to the stack, so that only if we use that tool, its impact
will be felt.

In this case is more about consistency, as the impact of this tool is
minimal.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-z2b3matvawihtenmez9hkcja@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we ever want to allow inject to work with something other than stdin,
we can put it back, but so far it is completely unused, so ditch it.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qmwpnktckhd43eynnkxgqfpm@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I.e. we don't need to resolve the evsel via the id and then check if it
is this or that event, just stash the right handler at evsel creation
time, then use evsel->handler.func() straight away.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bpz3axzr4f2cjppf4egm28wf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For similar reason of previous patches, convert NO_STRLCPY to positive
HAVE_STRLCPY.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-13-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For building perf without gtk+2, we can set NO_GTK2=1 as a argument of
make.  It then defines NO_GTK2_SUPPORT macro for C code to do the
proper handling.  However it usually used in a negative semantics -
e.g. #ifndef - so we saw double negations which can be misleading.
Convert it to a positive form to make it more readable.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For building perf without libnewt, we can set NO_NEWT=1 as a argument of
make.  It then defines NO_NEWT_SUPPORT macro for C code to do the proper
handling.  However it usually used in a negative semantics - e.g.  #ifndef -
so we saw double negations which can be misleading.  Convert it to a
positive form to make it more readable.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For building perf without libaudit, we can set NO_LIBAUDIT=1 as a
argument of make.  It then defines NO_LIBAUDIT_SUPPORT macro for C code
to do the proper handling.  However it usually used in a negative
semantics - e.g. #ifndef - so we saw double negations which can be
misleading.  Convert it to a positive form to make it more readable.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For building perf without libunwind, we can set NO_LIBUNWIND=1 as a
argument of make.  It then defines NO_LIBUNWIND_SUPPORT macro for C code
to do the proper handling.  However it usually used in a negative
semantics - e.g. #ifndef - so we saw double negations which can be
misleading.  Convert it to a positive form to make it more readable.

Also change NO_PERF_REGS macro to HAVE_PERF_REGS for the same reason.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For building perf without libelf, we can set NO_LIBELF=1 as a argument
of make.  It then defines NO_LIBELF_SUPPORT macro for C code to do the
proper handling.  However it usually used in a negative semantics -
e.g. #ifndef - so we saw double negations which can be misleading.
Convert it to a positive form to make it more readable.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It seems that the PYRF_OBJS variable is not used anymore or has no
effect at least.  The util/setup.py tracks its dependency using
util/python-ext-sources file and resulting objects are saved under
python_ext_build/tmp/.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since NO_DWARF is used in arch/$(ARCH)/Makefiles, it should be checked
before including those files.  It was moved by mistake during libelf
dependency removal work by me, sorry.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Improve listing of accessible enum perf probe variables, from Hyeoncheol Lee.

 * Don't stop the build if the audit libraries are not installed, fix from Namhyung Kim.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

What we get from audit_syscall_to_name isn't what we find in the
syscalls: tracepoint events, so add the alias that allows the tool to
find prctl, fstat, fstatat and stat.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3m9su7jhwnxvepnr3ne1du5k@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables

When showing accessible variables, an enum type variable was printed in
"variable-name" format. Change this format into "enum variable-name".
Signed-off-by: NHyeoncheol Lee <hyc.lee@gmail.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1348713399-4541-1-git-send-email-hyc.lee@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The newly added trace command requires an external audit library.

However it can cause a build error because it's not checked whether the
libaudit is installed on system:

    CC builtin-trace.o
  builtin-trace.c:7:22: fatal error: libaudit.h: No such file or directory
  compilation terminated.
  make: *** [builtin-trace.o] Error 1
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348745018-21744-1-git-send-email-namhyung@kernel.org
[ committer note: Added ", disables 'trace tool' to the feature warning msg ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that the perf report won't lost the cpu utilization information.

For example, if there're two process that have same name.

  $ perf report --stdio --showcpuutilization -s pid
  [SNIP]
  #   Overhead       sys        us  Command:  Pid
  #   ........  ........  ........  .............
  #
        55.12%     0.01%    55.10%  noploop:28781
        44.88%     0.06%    44.83%  noploop:28782

Before:
  $ perf report --stdio --showcpuutilization -s comm
  [SNIP]
  #   Overhead       sys        us
  #   ........  ........  ........
  #
       100.00%     0.06%    44.83%

After:
  $ perf report --stdio --showcpuutilization -s comm
  [SNIP]
  #   Overhead       sys        us
  #   ........  ........  ........
  #
       100.00%     0.07%    99.93%
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1348645663-25303-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Initially should look loosely like the venerable 'strace' tool, but
using the infrastructure in the perf tools to allow tracing extra
targets:

  [acme@sandy linux]$ perf trace --hell
  Error: unknown option `hell'

   usage: perf trace <PID>

      -p, --pid <pid>       trace events on existing process id
          --tid <tid>       trace events on existing thread id
          --all-cpus        system-wide collection from all CPUs
          --cpu <cpu>       list of cpus to monitor
          --no-inherit      child tasks do not inherit counters
          --mmap-pages <n>  number of mmap data pages
          --uid <user>      user to profile

  [acme@sandy linux]$

Those should have the same semantics as when using with 'perf record'.

It gets stuck sometimes, but hey, it works sometimes too!

In time it should support perf.data based workloads, i.e. it should have
a:
	-o filename

Command line option that will produce a perf.data file that can then be
used with 'perf trace' or any of the other perf tools (script, report,
etc).

It will also eventually have the set of functionalities described in the
previous 'trace' prototype by Thomas Gleixner:

   "Announcing a new utility: 'trace'"
   http://lwn.net/Articles/415728/

Also planned is to have some of the features suggested in the comments
of that LWN article.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It'll be needed in the next patches, where it'll be not associated
directly to an evsel.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used for things like the args field in the raw_syscalls:sys_enter
tracepoint.

Implement strval with it, its basicaly strval returning void *.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Elliminating code duplication.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9v4zl7ldlp8v6azrpsu5lupk@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not event_format->name, that doesn't contains the sys: part.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To apply a filter to all the evsels in an evlist.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Because that is what it really does, i.e. it applies the filters that
were parsed from the command line and stashed into the evsels they refer
to.

We'll need the set_filter method name to actually apply a filter to all
the evsels in an evlist, for instance, to ask that a syswide tracer
doesn't trace itself.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It will set up a syscall open tracepoint event, generate an open with
invalid flags, then check those flags were the ones reported in the
tracepoint fired.

For the filename we need vfs:getname, but that will go thru some more
iterations as the vfs getname codebase is going thru changes lately.

When that is in I'll just check that the perf_evsel__newtp constructor
is not bailing out and then add it to the evlist, catch the event and
check the filename against the one used in the 'open' call used to
trigger the event.

Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-p5w9aq0jcbb91ghzqomowm16@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were relying on the info in pevent, but since we have it in
perf_evsel, set up by the perf_session routine if read from a perf.data
file or by whoever creates the evsels, use it.

New 'perf test' entries will use it to parse locally generated events,
in a non perf.data centered workflow.

As well as use byteswap.h to get per arch optimized swap routines, like
other parts of perf (header, perf_evsel__parse_sample, symbol, etc)
already do.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8tjuxk09mlsfmh7macgkxsip@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of passing it around for parsing as an explicit parameter, will
help with reading tracepoint fields when not using a perf session or
pevent structure, i.e. for non perf.data centered workflows.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qa67ikv2sm49cwa7dyjhhp6g@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Or one with cpu_map->map[0] == -1.

Reducing the boilerplate in setting up an evlist by nor requiring a
cpu_map to be created at all.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rnaqn3dtnsfo1wlbbf3fhx00@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It needs to properly set the sample_type, sample_period and the KVM
related perf_event_attr fields.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core

Pull tracing updates from Steve Rostedt.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core fixes from Arnaldo Carvalho de Melo:

 * The new perf_evsel__tp_sched_test 'perf test' broke the build by setting the
   'ret' variable but not using it, caught by newer gcc
   -Werror=unused-but-set-variable, fix from Namhyung Kim.

 * pevent_parse_event should return a proper PEVENT_ERRNO__ and call
   pevent_free_format on its failure path, fixes from Namhyung Kim.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

If __pevent_parse_format() succeeded but add_event() failed, 'ret' didn't
have a proper error code.  Set it to PEVENT_ERRNO__MEM_ALLOC_FAILED.

In addition, at that point 'event' also has fields and format
information and they all need to be freed.  Call pevent_free_format() to
handle it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1348575919-4954-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit 6a6cd11d ("perf test: Add test for the sched tracepoint
format fields") added following build error:

    CC builtin-test.o
  builtin-test.c: In function ‘perf_evsel__test_field’:
  builtin-test.c:1216:6: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable]
  builtin-test.c: In function ‘perf_evsel__tp_sched_test’:
  builtin-test.c:1242:6: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable]
  cc1: all warnings being treated as errors
  make: *** [builtin-test.o] Error 1
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348539628-3821-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Convert the trace builtins to use the growing evsel/evlist
   tracepoint infrastructure, removing several open coded constructs
   like switch like series of strcmp to dispatch events, etc.
   Basically what had already been showcased in 'perf sched'.

 * Add evsel constructor for tracepoints, that uses libtraceevent
   just to parse the /format events file, use it in a new 'perf test'
   to make sure the libtraceevent format parsing regressions can
   be more readily caught.

 * Some strange errors were happening in some builds, but not on the
   next, reported by several people, problem was some parser related
   files, generated during the build, didn't had proper make deps,
   fix from Eric Sandeen.

 * Fix some compiling errors on 32-bit, from Feng Tang.

 * Don't use sscanf extension %as, not available on bionic, reimplementation
   by Irina Tirdea.

 * Fix bfd.h/libbfd detection with recent binutils, from Markus Trippelsdorf.

 * Introduce struct and cache information about the environment where a
   perf.data file was captured, from Namhyung Kim.

 * Fix several error paths in libtraceevent, from Namhyung Kim.

   Print event causing perf_event_open() to fail in 'perf record',
   from Stephane Eranian.

 * New 'kvm' analysis tool, from Xiao Guangrong.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch splits trace event initialization in two stages:
 * ftrace enable
 * sysfs event entry creation

This allows to capture trace events from an earlier point
by using 'trace_event' kernel parameter and is important
to trace boot-up allocations.

Note that, in order to enable events at core_initcall,
it's necessary to move init_ftrace_syscalls() from
core_initcall to early_initcall.

Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.comSigned-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In our application, we have trace markers spread through user-space.
We have markers in GL, X, etc. These are super handy for Chrome's
about:tracing feature (Chrome + system + kernel trace view), but
can be very distracting when you're trying to debug a kernel issue.

I normally, use "grep -v tracing_mark_write" but it would be nice
if I could just temporarily disable markers all together.

Link: http://lkml.kernel.org/r/1347066739-26285-1-git-send-email-msb@chromium.org

CC: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now alloc_arg returns NULL if memory allocation failed, it should be
handled on callsites properly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/87k3vpzbqo.fsf_-_@sejong.aot.lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we make sure the routines that do event format parsing are
working on at least two well know scheduler tracepoints.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g3rm9b3wtim4djx3z8dkftrj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The existing constructor receives a perf_event_attr filled with the
event type and the config.

To reduce the boilerplate for tracepoints, provide a new constructor,
perf_evsel__newtp() that receives the tracepoint name and will open
the debugfs file, call into libtraceevent new pevent_parse_format file
to fill its ->tp_format member, so that users can then just call
perf_evsel__field() to access its fields.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-6du8dl1hz0y5l4cybodye7hn@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The pevent_parse_event() routine will parse a events/sys/tp/format file
and add an event_format instance to the pevent struct.

This patch introduces a pevent_parse_format() routine with just the bits
needed to parse the event/sys/tp/format file and just return the
event_format instance, useful for when all we want is to parse the
format file, without requiring the pevent struct.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-lge0afl47arh86om0m6a5bqr@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cleaned event-parse.c this time, just propagate the errors and in handle
them the call sites.
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-9ebpr2vgfk2qs2841i99sa8y@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>