- 05 1月, 2009 1 次提交
-
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 1月, 2009 3 次提交
-
-
由 Mike Travis 提交于
Impact: use new cpumask API to reduce memory and stack usage Allocate the following local cpumasks based on the number of cpus that are present. References will use new cpumask API. (Currently only modified for x86_64, x86_32 continues to use the *_map variants.) cpu_callin_mask cpu_callout_mask cpu_initialized_mask cpu_sibling_setup_mask Provide the following accessor functions: struct cpumask *cpu_sibling_mask(int cpu) struct cpumask *cpu_core_mask(int cpu) Other changes are when setting or clearing the cpu online, possible or present maps, use the accessor functions. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Impact: Reduce future system panics due to cpumask operations using NR_CPUS Insure that code does not look at bits >= nr_cpu_ids as when cpumasks are allocated based on nr_cpu_ids, these extra bits will not be defined. Also some other minor updates: * change in to use cpu accessor function set_cpu_present() instead of directly accessing cpu_present_map w/cpu_clear() [arch/x86/kernel/reboot.c] * use cpumask_of() instead of &cpumask_of_cpu() [arch/x86/kernel/reboot.c] * optimize some cpu_mask_to_apicid_and functions. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Impact: enables /sys/devices/system/cpu/{kernel_max,offline} user interface By setting total_cpus, the drivers/base/cpu.c will display the values of kernel_max (NR_CPUS-1) and the offlined cpu map. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 12月, 2008 1 次提交
-
-
由 Rusty Russell 提交于
Impact: New API Like cpu_coregroup_map, but returns a (const) pointer. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@redhat.com>
-
- 25 12月, 2008 1 次提交
-
-
由 Frederic Weisbecker 提交于
Impact: fix a crash/hard-reboot on certain configs while enabling cpu runtime On some archs, the boot of a secondary cpu can have an early fragile state. On x86-64, the pda is not initialized on the first stage of a cpu boot but it is needed to get the cpu number and the current task pointer. This data is needed during tracing. As they were dereferenced at this stage, we got a crash while tracing a cpu being enabled at runtime. Some other archs like ia64 can have such kind of issue too. Changes on v2: We dropped the previous solution of a per-arch called function to guess the current state of a cpu. That could slow down the tracing. This patch removes the -pg flag on arch/x86/kernel/cpu/common.c where the low level cpu boot functions exist, on start_secondary() and a helper function used at this stage. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 12月, 2008 1 次提交
-
-
由 Mike Travis 提交于
Impact: add new boot parameter Use possible_cpus=NUM kernel parameter to extend the number of possible cpus. The ability to HOTPLUG ON cpus that are "possible" but not "present" is dealt with in a later patch. Signed-off-by: NMike Travis <travis@sgi.com>
-
- 17 12月, 2008 1 次提交
-
-
由 Mike Travis 提交于
Impact: cleanup, remove on-stack cpumask. The "map" arg is always cpu_online_mask. Importantly, set_affinity always ands the argument with cpu_online_mask anyway, so we don't need to do it in fixup_irqs(), avoiding a temporary. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com>
-
- 15 12月, 2008 1 次提交
-
-
由 Zachary Amsden 提交于
VMI initialiation can relocate the fixmap, causing early_ioremap to malfunction if it is initialized before the relocation. To fix this, VMI activation is split into two phases; the detection, which must happen before setting up ioremap, and the activation, which must happen after parsing early boot parameters. This fixes a crash on boot when VMI is enabled under VMware. Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 12月, 2008 1 次提交
-
-
由 Rusty Russell 提交于
Impact: cleanup Each SMP arch defines these themselves. Move them to a central location. Twists: 1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a CONFIG_INIT_ALL_POSSIBLE for this rather than break them. 2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'. Those archs simply have phys_cpu_present_map replaced everywhere. 3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky so I just manipulate them both in sync. 4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map' declarations. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Reviewed-by: NGrant Grundler <grundler@parisc-linux.org> Tested-by: NTony Luck <tony.luck@intel.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Mike Travis <travis@sgi.com> Cc: ink@jurassic.park.msu.ru Cc: rmk@arm.linux.org.uk Cc: starvik@axis.com Cc: tony.luck@intel.com Cc: takata@linux-m32r.org Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: paulus@samba.org Cc: schwidefsky@de.ibm.com Cc: lethal@linux-sh.org Cc: wli@holomorphy.com Cc: davem@davemloft.net Cc: jdike@addtoit.com Cc: mingo@redhat.com
-
- 05 12月, 2008 1 次提交
-
-
由 Michael Tokarev 提交于
Just come across this when booting on an old hw.. Looks somewhat ugly, that single missing space ;) Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 11月, 2008 2 次提交
-
-
由 Yinghai Lu 提交于
Impact: fix wakeup_secondary_cpu with hotplug We can not put that into x86_quirks, because that is __initdata. So try to move that to genapic, and add update_genapic in x86_quirks. later we even could use that stub to: 1. autodetect CONFIG_ES7000_CLUSTERED_APIC 2. more correct inquire_remote_apic with apic_verbosity setting. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Impact: fix secondary-CPU wakeup/init path with numaq and es7000 While looking at wakeup_secondary_cpu for WAKE_SECONDARY_VIA_NMI: |#ifdef WAKE_SECONDARY_VIA_NMI |/* | * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal | * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this | * won't ... remember to clear down the APIC, etc later. | */ |static int __devinit |wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) |{ | unsigned long send_status, accept_status = 0; | int maxlvt; |... | if (APIC_INTEGRATED(apic_version[phys_apicid])) { | maxlvt = lapic_get_maxlvt(); I noticed that there is no warning about undefined phys_apicid... because WAKE_SECONDARY_VIA_NMI and WAKE_SECONDARY_VIA_INIT can not be defined at the same time. So NUMAQ is using wrong wakeup_secondary_cpu. WAKE_SECONDARY_VIA_NMI, WAKE_SECONDARY_VIA_INIT and WAKE_SECONDARY_VIA_MIP are variants of a weird and fragile preprocessor-driven "HAL" mechanisms to specify the kind of secondary-CPU wakeup strategy a given x86 kernel will use. The vast majority of systems want to use INIT for secondary wakeup - NUMAQ uses an NMI, (old-style-) ES7000 uses 'MIP' (a firmware driven in-memory flag to let secondaries continue). So convert these mechanisms to x86_quirks and add a ->wakeup_secondary_cpu() method to specify the rare exception to the sane default. Extend genapic accordingly as well, for 32-bit. While looking further, I noticed that functions in wakecup.h for numaq and es7000 are different to the default in mach_wakecpu.h - but smpboot.c will only use default mach_wakecpu.h with smphook.h. So we need to add mach_wakecpu.h for mach_generic, to properly support numaq and es7000, and vectorize the following SMP init methods: int trampoline_phys_low; int trampoline_phys_high; void (*wait_for_init_deassert)(atomic_t *deassert); void (*smp_callin_clear_local_apic)(void); void (*store_NMI_vector)(unsigned short *high, unsigned short *low); void (*restore_NMI_vector)(unsigned short *high, unsigned short *low); void (*inquire_remote_apic)(int apicid); Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 10月, 2008 1 次提交
-
-
由 Cyrill Gorcunov 提交于
Impact: fix APIC IRQ irregularities on certain older boxes We should touch the APIC ESR register if only we have it. The patch fixes the problem mentioned by Max Kellermann: http://lkml.org/lkml/2008/10/17/147Bisected-by: NMax Kellermann <mk@cm4all.com> Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> [ mingo@elte.hu: build fix ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 10月, 2008 1 次提交
-
-
由 Andi Kleen 提交于
It's somewhat unlikely that it happens, but right now a race window between interrupts or machine checks or oopses could corrupt the tainted bitmap because it is modified in a non atomic fashion. Convert the taint variable to an unsigned long and use only atomic bit operations on it. Unfortunately this means the intvec sysctl functions cannot be used on it anymore. It turned out the taint sysctl handler could actually be simplified a bit (since it only increases capabilities) so this patch actually removes code. [akpm@linux-foundation.org: remove unneeded include] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 10月, 2008 1 次提交
-
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 10月, 2008 6 次提交
-
-
由 Thomas Gleixner 提交于
remove remainder of additional_cpus logic. We now just listen to the disabled_cpus value like we did for years. disabled_cpus is always >= 0 so no need for an extra check. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
additional_cpus=<x> parameter is dangerous and broken: for example if we boot additional_cpus=-2 on a stock dual-core system it will crash the box on bootup. So reduce the maze of code a bit by removingthe user-configurability angle. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Chuck Ebbert 提交于
x86: allow number of additional hotplug CPUs to be set at compile time, V2 The default number of additional CPU IDs for hotplugging is determined by asking ACPI or mptables how many "disabled" CPUs there are in the system, but many systems get this wrong so that e.g. a uniprocessor machine gets an extra CPU allocated and never switches to single CPU mode. And sometimes CPU hotplugging is enabled only for suspend/hibernate anyway, so the additional CPU IDs are not wanted. Allow the number to be set to zero at compile time. Also, force the number of extra CPUs to zero if hotplugging is disabled which allows removing some conditional code. Tested on uniprocessor x86_64 that ACPI claims has a disabled processor, with CPU hotplugging configured. ("After" has the number of additional CPUs set to 0) Before: NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1 After: NR_CPUS: 512, nr_cpu_ids: 1, nr_node_ids 1 [Changed the name of the option and the prompt according to Ingo's suggestion.] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Chuck Ebbert 提交于
Commit 4a701737 ("x86: move prefill_possible_map calling early, fix") is the wrong fix: prefill_possible_map() needs to be available even when CONFIG_HOTPLUG_CPU is not set. A followon patch will do that. Fix this correctly by making prefill_possible_map() available even when CONFIG_HOTPLUG_CPU is not set. The function is needed so that the number of possible CPUs can be determined. Tested on uniprocessor machine with CPU hotplug disabled. From boot log: Before: NR_CPUS: 512, nr_cpu_ids: 512, nr_node_ids 1 After: NR_CPUS: 512, nr_cpu_ids: 1, nr_node_ids 1 Signed-off-by: NChuck Ebbert <cebbert@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
We should check if we have ESR register before reading from it. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Manfred Spraul 提交于
Secondary cpus start with local interrupts disabled. start_secondary() first initializes the new cpu, then it enables the local interrupts. (although interrupts are enabled within smp_callin() as well). Right now, the local interrupts are enabled as a side effect of calling ipi_call_lock_irq(). The attached patch clarifies when local interrupts are enabled. Signed-off-by: NManfred Spraul <manfred@colorfullife.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 9月, 2008 1 次提交
-
-
由 Manfred Spraul 提交于
Right now, there is no notifier that is called on a new cpu, before the new cpu begins processing interrupts/softirqs. Various kernel function would need that notification, e.g. kvm works around by calling smp_call_function_single(), rcu polls cpu_online_map. The patch adds a CPU_STARTING notification. It also adds a helper function that sends the message to all cpu_chain handlers. Tested on x86-64. All other archs are untested. Especially on sparc, I'm not sure if I got it right. Signed-off-by: NManfred Spraul <manfred@colorfullife.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 8月, 2008 3 次提交
-
-
由 Alex Nixon 提交于
It allows paravirt implementations of cpu_disable to share the cpu_disable_common code, without having to take on board APIC writes, which may not be appropriate. Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alex Nixon 提交于
Add the new play_dead into smpboot.c, as it fits more cleanly in there alongside other CONFIG_HOTPLUG functions. Separate out the common code into its own function. Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alex Nixon 提交于
Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 8月, 2008 1 次提交
-
-
由 Marcin Slusarz 提交于
WARNING: vmlinux.o(.cpuinit.text+0x3cc4): Section mismatch in reference from the function uv_cpu_init() to the function .init.text:uv_system_init() The function __cpuinit uv_cpu_init() references a function __init uv_system_init(). If uv_system_init is only used by uv_cpu_init then annotate uv_system_init with a matching annotation. uv_system_init was ment to be called only once, so do it from codepath (native_smp_prepare_cpus) which is called once, right before activation of other cpus (smp_init). Note: old code relied on uv_node_to_blade being initialized to 0, but it'a not initialized from anywhere. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Acked-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 8月, 2008 1 次提交
-
-
由 Marcin Slusarz 提交于
Take out part of get_local_pda referencing __init function (free_bootmem) to new (static) function marked as __ref. It's safe to do because free_bootmem is called before __init sections are dropped. WARNING: vmlinux.o(.cpuinit.text+0x3cd7): Section mismatch in reference from the function get_local_pda() to the function .init.text:free_bootmem() The function __cpuinit get_local_pda() references a function __init free_bootmem(). If free_bootmem is only used by get_local_pda then annotate free_bootmem with a matching annotation. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 8月, 2008 1 次提交
-
-
由 Li Zefan 提交于
prefill_possible_map() is defined inside CONFIG_HOTPLUG_CPU, so the nesting CONFIG_HOTPLUG_CPU is just redundant. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 8月, 2008 2 次提交
-
-
由 Yinghai Lu 提交于
clear bits for cpu nr > 8. This allows us to boot the full range of possible CPUs that the supported APIC model will allow. Previously we'd hang or boot up with less than 8 CPUs. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Tested-by: NJeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Max Krasnyansky 提交于
For some reason we had two parsers registered for maxcpus=. One in init/main.c and another in arch/x86/smpboot.c. So I nuked the one in arch/x86. Also 64-bit kernels used to handle maxcpus= as documented in Documentation/cpu-hotplug.txt. CPUs with 'id > maxcpus' are initialized but not booted. 32-bit version for some reason ignored them even though all the infrastructure for booting them later is there. In the current mainline both 64 and 32 bit versions are broken. This patch restores the correct behaviour. I've tested x86_64 version on 4- and 8- way Core2 and 2-way Opteron based machines. Various config combinations SMP, !SMP, CPU_HOTPLUG, !CPU_HOTPLUG. Booted with maxcpus=1 and maxcpus=4, etc. Everything is working as expected. So far we've received two reports from different people confirming that 32-bit version also works fine, both on dual core laptops and 16way server machines. [v2: This version fixes visws breakage pointed out by Ingo.] Signed-off-by: NMax Krasnyansky <maxk@qualcomm.com> Cc: lizf@cn.fujitsu.com Cc: jeff.chua.linux@gmail.com Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 8月, 2008 1 次提交
-
-
由 Yinghai Lu 提交于
Jeff Chua reported that booting a !bigsmp kernel on a 16-way box hangs silently. this is a long-standing issue, smp start AP cpu could check the apic id >=8 etc before trying to start it. achieve this by moving the def_to_bigsmp check later and skip the apicid id > 8 [ mingo@elte.hu: clean up the message that is printed. ] Reported-by: N"Jeff Chua" <jeff.chua.linux@gmail.com> Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> arch/x86/kernel/setup.c | 6 ------ arch/x86/kernel/smpboot.c | 10 ++++++++++ 2 files changed, 10 insertions(+), 6 deletions(-)
-
- 11 8月, 2008 1 次提交
-
-
由 Eric W. Biederman 提交于
Having cpu_online_map change during assign_irq_vector can result in some really nasty and weird things happening. The one that bit me last time was accessing non existent per cpu memory for non existent cpus. This locking was removed in a sloppy x86_64 and x86_32 merge patch. Guys can we please try and avoid subtly breaking x86 when we are merging files together? Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 25 7月, 2008 1 次提交
-
-
由 Jaswinder Singh 提交于
Signed-off-by: NJaswinder Singh <jaswinder@infradead.org>
-
- 22 7月, 2008 1 次提交
-
-
由 Thomas Gleixner 提交于
There are a couple of places where (P)Dprintk is used which is an old compile time enabled printk wrapper. Convert it to the generic pr_debug(). Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 7月, 2008 2 次提交
-
-
由 Maciej W. Rozycki 提交于
Use alternatives to select the workaround for the 11AP Pentium erratum for the affected steppings on the fly rather than build time. Remove the X86_GOOD_APIC configuration option and replace all the calls to apic_write_around() with plain apic_write(), protecting accesses to the ESR as appropriate due to the 3AP Pentium erratum. Remove apic_read_around() and all its invocations altogether as not needed. Remove apic_write_atomic() and all its implementing backends. The use of ASM_OUTPUT2() is not strictly needed for input constraints, but I have used it for readability's sake. I had the feeling no one else was brave enough to do it, so I went ahead and here it is. Verified by checking the generated assembly and tested with both a 32-bit and a 64-bit configuration, also with the 11AP "feature" forced on and verified with gdb on /proc/kcore to work as expected (as an 11AP machines are quite hard to get hands on these days). Some script complained about the use of "volatile", but apic_write() needs it for the same reason and is effectively a replacement for writel(), so I have disregarded it. I am not sure what the policy wrt defconfig files is, they are generated and there is risk of a conflict resulting from an unrelated change, so I have left changes to them out. The option will get removed from them at the next run. Some testing with machines other than mine will be needed to avoid some stupid mistake, but despite its volume, the change is not really that intrusive, so I am fairly confident that because it works for me, it will everywhere. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 7月, 2008 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
This allows Xen's xen_cpu_up() to allocate a pda for the new CPU. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 7月, 2008 2 次提交
-
-
由 Yinghai Lu 提交于
also remove GET_APIC_ID when read_apic_id is used. need to apply after [PATCH] x86: mach_apicdef.h need to include before smp.h Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
x2apic support. Interrupt-remapping must be enabled before enabling x2apic, this is needed to ensure that IO interrupts continue to work properly after the cpu mode is changed to x2apic(which uses 32bit extended physical/cluster apic id). On systems where apicid's are > 255, BIOS can handover the control to OS in x2apic mode. Or if the OS handover was in legacy xapic mode, check if it is capable of x2apic mode. And if we succeed in enabling Interrupt-remapping, then we can enable x2apic mode in the CPU. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: NIngo Molnar <mingo@elte.hu>
-