- 23 8月, 2018 2 次提交
-
-
由 Adrian Reber 提交于
The CHECKPOINT_RESTORE configuration option was introduced in 2012 and combined with EXPERT. CHECKPOINT_RESTORE is already enabled in many distribution kernels and also part of the defconfigs of various architectures. To make it easier for distributions to enable CHECKPOINT_RESTORE this removes EXPERT and moves the configuration option out of the EXPERT block. Link: http://lkml.kernel.org/r/20180712130733.11510-1-adrian@lisas.deSigned-off-by: NAdrian Reber <adrian@lisas.de> Acked-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NHendrik Brueckner <brueckner@linux.ibm.com> Acked-by: NPavel Emelyanov <xemul@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Correct typos of "it's" to "its. Link: http://lkml.kernel.org/r/0ac627b6-5527-55f4-0489-1631aa34fc11@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 8月, 2018 1 次提交
-
-
由 Kirill Tkhai 提交于
Introduce new config option, which is used to replace repeating CONFIG_MEMCG && !CONFIG_SLOB pattern. Next patches add a little more memcg+kmem related code, so let's keep the defines more clearly. Link: http://lkml.kernel.org/r/153063053670.1818.15013136946600481138.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com> Tested-by: NShakeel Butt <shakeelb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <jbacik@fb.com> Cc: Li RongQing <lirongqing@baidu.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Roman Gushchin <guro@fb.com> Cc: Sahitya Tummala <stummala@codeaurora.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 8月, 2018 1 次提交
-
-
由 Rob Landley 提交于
Avoids warning messages with the latest release of toybox, which never bothered to implement the --longopts nothing was using. Signed-off-by: NRob Landley <rob@landley.net> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 02 8月, 2018 3 次提交
-
-
由 Christoph Hellwig 提交于
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to disable preempt support for alpha, hexagon, non-coldfire m68k and user mode Linux. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Christoph Hellwig 提交于
Instead of duplicating the source statements in every architecture just do it once in the toplevel Kconfig file. Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of the top-level Kconfig into arch/Kconfig so that don't violate ordering constraits while keeping a sensible menu structure. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Christoph Hellwig 提交于
microblaze and nios2 define their own always n SWAP symbols. Remove those and let the generic defintion do the right thing by adding a new symbol to disable swap entirely. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 18 7月, 2018 1 次提交
-
-
由 Laura Abbott 提交于
In Fedora, the debug information is packaged separately (foo-debuginfo) and can be installed separately. There's been a long standing issue where only one version of a debuginfo info package can be installed at a time. There's been an effort for Fedora for parallel debuginfo to rectify this problem. Part of the requirement to allow parallel debuginfo to work is that build ids are unique between builds. The existing upstream rpm implementation ensures this by re-calculating the build-id using the version and release as a seed. This doesn't work 100% for the kernel because of the vDSO which is its own binary and doesn't get updated when embedded. Fix this by adding some data in an ELF note for both the kernel and modules. The data is controlled via a Kconfig option so distributions can set it to an appropriate value to ensure uniqueness between builds. Suggested-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 28 6月, 2018 1 次提交
-
-
由 Masahiro Yamada 提交于
Since commit 5d20ee31 ("kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled"), HAVE_LD_DEAD_CODE_DATA_ELIMINATION is supposed to be selected by architectures that are capable of this functionality. LD_DEAD_CODE_DATA_ELIMINATION is now users' selection. Update the help message. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 25 6月, 2018 1 次提交
-
-
由 Vasily Gorbik 提交于
Add "None" as the kernel compression mode. This option is useful for debugging the kernel in slow simulation environments, where decompressing and moving the kernel is awfully slow. Uncompressed kernel implementation might allow early boot code to skip the decompressor and jump right at uncompressed kernel image entry point. Platforms implementing that should define HAVE_KERNEL_UNCOMPRESSED. Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NVasily Gorbik <gor@linux.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 6月, 2018 1 次提交
-
-
由 Christoph Hellwig 提交于
Currently the code is split over various files with dma- prefixes in the lib/ and drives/base directories, and the number of files keeps growing. Move them into a single directory to keep the code together and remove the file name prefixes. To match the irq infrastructure this directory is placed under the kernel/ directory. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 08 6月, 2018 2 次提交
-
-
由 Masahiro Yamada 提交于
This will be useful to describe the clang version dependency. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Masahiro Yamada 提交于
This will be useful to specify the required compiler version, like this: config FOO bool "Use Foo" depends on GCC_VERSION >= 40800 help This feature requires GCC 4.8 or newer. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NKees Cook <keescook@chromium.org>
-
- 06 6月, 2018 1 次提交
-
-
由 Mathieu Desnoyers 提交于
Expose a new system call allowing each thread to register one userspace memory area to be used as an ABI between kernel and user-space for two purposes: user-space restartable sequences and quick access to read the current CPU number value from user-space. * Restartable sequences (per-cpu atomics) Restartables sequences allow user-space to perform update operations on per-cpu data without requiring heavy-weight atomic operations. The restartable critical sections (percpu atomics) work has been started by Paul Turner and Andrew Hunter. It lets the kernel handle restart of critical sections. [1] [2] The re-implementation proposed here brings a few simplifications to the ABI which facilitates porting to other architectures and speeds up the user-space fast path. Here are benchmarks of various rseq use-cases. Test hardware: arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading The following benchmarks were all performed on a single thread. * Per-CPU statistic counter increment getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 344.0 31.4 11.0 x86-64: 15.3 2.0 7.7 * LTTng-UST: write event 32-bit header, 32-bit payload into tracer per-cpu buffer getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 2502.0 2250.0 1.1 x86-64: 117.4 98.0 1.2 * liburcu percpu: lock-unlock pair, dereference, read/compare word getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 751.0 128.5 5.8 x86-64: 53.4 28.6 1.9 * jemalloc memory allocator adapted to use rseq Using rseq with per-cpu memory pools in jemalloc at Facebook (based on rseq 2016 implementation): The production workload response-time has 1-2% gain avg. latency, and the P99 overall latency drops by 2-3%. * Reading the current CPU number Speeding up reading the current CPU number on which the caller thread is running is done by keeping the current CPU number up do date within the cpu_id field of the memory area registered by the thread. This is done by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the current thread. Upon return to user-space, a notify-resume handler updates the current CPU value within the registered user-space memory area. User-space can then read the current CPU number directly from memory. Keeping the current cpu id in a memory area shared between kernel and user-space is an improvement over current mechanisms available to read the current CPU number, which has the following benefits over alternative approaches: - 35x speedup on ARM vs system call through glibc - 20x speedup on x86 compared to calling glibc, which calls vdso executing a "lsl" instruction, - 14x speedup on x86 compared to inlined "lsl" instruction, - Unlike vdso approaches, this cpu_id value can be read from an inline assembly, which makes it a useful building block for restartable sequences. - The approach of reading the cpu id through memory mapping shared between kernel and user-space is portable (e.g. ARM), which is not the case for the lsl-based x86 vdso. On x86, yet another possible approach would be to use the gs segment selector to point to user-space per-cpu data. This approach performs similarly to the cpu id cache, but it has two disadvantages: it is not portable, and it is incompatible with existing applications already using the gs segment selector for other purposes. Benchmarking various approaches for reading the current CPU number: ARMv7 Processor rev 4 (v7l) Machine model: Cubietruck - Baseline (empty loop): 8.4 ns - Read CPU from rseq cpu_id: 16.7 ns - Read CPU from rseq cpu_id (lazy register): 19.8 ns - glibc 2.19-0ubuntu6.6 getcpu: 301.8 ns - getcpu system call: 234.9 ns x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz: - Baseline (empty loop): 0.8 ns - Read CPU from rseq cpu_id: 0.8 ns - Read CPU from rseq cpu_id (lazy register): 0.8 ns - Read using gs segment selector: 0.8 ns - "lsl" inline assembly: 13.0 ns - glibc 2.19-0ubuntu6 getcpu: 16.6 ns - getcpu system call: 53.9 ns - Speed (benchmark taken on v8 of patchset) Running 10 runs of hackbench -l 100000 seems to indicate, contrary to expectations, that enabling CONFIG_RSEQ slightly accelerates the scheduler: Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1 kernel parameter), with a Linux v4.6 defconfig+localyesconfig, restartable sequences series applied. * CONFIG_RSEQ=n avg.: 41.37 s std.dev.: 0.36 s * CONFIG_RSEQ=y avg.: 40.46 s std.dev.: 0.33 s - Size On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is 567 bytes, and the data size increase of vmlinux is 5696 bytes. [1] https://lwn.net/Articles/650333/ [2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdfSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Joel Fernandes <joelaf@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Hunter <ahh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com
-
- 29 5月, 2018 3 次提交
-
-
由 Masahiro Yamada 提交于
Now that 'shell' function is supported, this can be self-contained in Kconfig. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>
-
由 Masahiro Yamada 提交于
To get access to environment variables, Kconfig needs to define a symbol using "option env=" syntax. It is tedious to add a symbol entry for each environment variable given that we need to define much more such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability in Kconfig. Adding '$' for symbol references is grammatically inconsistent. Looking at the code, the symbols prefixed with 'S' are expanded by: - conf_expand_value() This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list' - sym_expand_string_value() This is used to expand strings in 'source' and 'mainmenu' All of them are fixed values independent of user configuration. So, they can be changed into the direct expansion instead of symbols. This change makes the code much cleaner. The bounce symbols 'SRCARCH', 'ARCH', 'SUBARCH', 'KERNELVERSION' are gone. sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE' should be replaced with an environment variable. ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced without '$' prefix. The new syntax is addicted by Make. The variable reference needs parentheses, like $(FOO), but you can omit them for single-letter variables, like $F. Yet, in Makefiles, people tend to use the parenthetical form for consistency / clarification. At this moment, only the environment variable is supported, but I will extend the concept of 'variable' later on. The variables are expanded in the lexer so we can simplify the token handling on the parser side. For example, the following code works. [Example code] config MY_TOOLCHAIN_LIST string default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)" [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E" Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Masahiro Yamada 提交于
Kbuild provides a couple of ways to specify CROSS_COMPILE: [1] Command line [2] Environment [3] arch/*/Makefile (only some architectures) [4] CONFIG_CROSS_COMPILE [4] is problematic for the compiler capability tests in Kconfig. CONFIG_CROSS_COMPILE allows users to change the compiler prefix from 'make menuconfig', etc. It means, the compiler options would have to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed. To avoid complexity and performance issues, I'd like to evaluate the shell commands statically, i.e. only parsing Kconfig files. I guess the majority is [1] or [2]. Currently, there are only 5 defconfig files that specify CONFIG_CROSS_COMPILE. arch/arm/configs/lpc18xx_defconfig arch/hexagon/configs/comet_defconfig arch/nds32/configs/defconfig arch/openrisc/configs/or1ksim_defconfig arch/openrisc/configs/simple_smp_defconfig Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NKees Cook <keescook@chromium.org>
-
- 18 5月, 2018 1 次提交
-
-
The 'tip' prefix probably referred to the -tip tree and is not required, remove it. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180515165328.24899-1-bigeasy@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 17 5月, 2018 1 次提交
-
-
由 Nicholas Piggin 提交于
Architectures that are capable can select HAVE_LD_DEAD_CODE_DATA_ELIMINATION to enable selection of that option (as an EXPERT kernel option). Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 15 5月, 2018 1 次提交
-
-
由 Song Liu 提交于
Currently, we cannot parse build_id in nmi context because of up_read(¤t->mm->mmap_sem), this makes stackmap with build_id less useful. This patch enables parsing build_id in nmi by putting the up_read() call in irq_work. To avoid memory allocation in nmi context, we use per cpu variable for the irq_work. As a result, only one irq_work per cpu is allowed. If the irq_work is in-use, we fallback to only report ips. Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 05 4月, 2018 2 次提交
-
-
由 Dominik Brodowski 提交于
It may be useful for an architecture to override the definitions of the COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in <linux/compat.h>, in particular to use a different calling convention for syscalls. This patch provides a mechanism to do so, based on the previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled, <asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used to define the macros mentioned above. Moreover, as the syscall calling convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set, the compat syscall function prototypes in <linux/compat.h> are #ifndef'd out in that case. As some of the syscalls and/or compat syscalls may not be present, the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c as well as the SYS_NI() and COMPAT_SYS_NI() macros in kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dominik Brodowski 提交于
It may be useful for an architecture to override the definitions of the SYSCALL_DEFINE0() and __SYSCALL_DEFINEx() macros in <linux/syscalls.h>, in particular to use a different calling convention for syscalls. This patch provides a mechanism to do so: It introduces CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled, <asm/sycall_wrapper.h> is included in <linux/syscalls.h> and may be used to define the macros mentioned above. Moreover, as the syscall calling convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set, the syscall function prototypes in <linux/syscalls.h> are #ifndef'd out in that case. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180405095307.3730-3-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 26 3月, 2018 1 次提交
-
-
由 Arnd Bergmann 提交于
A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: NKalle Valo <kvalo@codeaurora.org> Acked-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 10 3月, 2018 1 次提交
-
-
由 David Howells 提交于
Remove the MN10300 arch as the hardware is defunct. Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Masahiro Yamada <yamada.masahiro@socionext.com> cc: linux-am33-list@redhat.com Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 22 2月, 2018 1 次提交
-
-
由 William Breathitt Gray 提交于
PC/104 device driver Kconfig options previously had an implicit EXPERT dependency by way of an explicit ISA_BUS_API dependency. Now that these driver Kconfig options select ISA_BUS_API rather than depend on it, the PC104 Kconfig option should have an explicit EXPERT dependency. The PC/104 form factor and bus architecture are common in embedded and specialized systems, but uncommon in typical desktop setups. For this reason, it is best to mask these devices and configurations via the EXPERT Kconfig option because the majority of users will never need to concern themselves with PC/104. Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 06 2月, 2018 3 次提交
-
-
由 Mathieu Desnoyers 提交于
Provide core serializing membarrier command to support memory reclaim by JIT. Each architecture needs to explicitly opt into that support by documenting in their architecture code how they provide the core serializing instructions required when returning from the membarrier IPI, and after the scheduler has updated the curr->mm pointer (before going back to user-space). They should then select ARCH_HAS_MEMBARRIER_SYNC_CORE to enable support for that command on their architecture. Architectures selecting this feature need to either document that they issue core serializing instructions when returning to user-space, or implement their architecture-specific sync_core_before_usermode(). Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-9-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathieu Desnoyers 提交于
Introduce an architecture function that ensures the current CPU issues a core serializing instruction before returning to usermode. This is needed for the membarrier "sync_core" command. Architectures defining the sync_core_before_usermode() static inline need to select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-7-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathieu Desnoyers 提交于
Allow PowerPC to skip the full memory barrier in switch_mm(), and only issue the barrier when scheduling into a task belonging to a process that has registered to use expedited private. Threads targeting the same VM but which belong to different thread groups is a tricky case. It has a few consequences: It turns out that we cannot rely on get_nr_threads(p) to count the number of threads using a VM. We can use (atomic_read(&mm->mm_users) == 1 && get_nr_threads(p) == 1) instead to skip the synchronize_sched() for cases where the VM only has a single user, and that user only has a single thread. It also turns out that we cannot use for_each_thread() to set thread flags in all threads using a VM, as it only iterates on the thread group. Therefore, test the membarrier state variable directly rather than relying on thread flags. This means membarrier_register_private_expedited() needs to set the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag, issue synchronize_sched(), and only then set MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY which allows private expedited membarrier commands to succeed. membarrier_arch_switch_mm() now tests for the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20180129202020.8515-3-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 10 1月, 2018 1 次提交
-
-
由 Alexei Starovoitov 提交于
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 09 1月, 2018 1 次提交
-
-
由 Geert Uytterhoeven 提交于
On uniprocessor systems, critical and non-critical tasks cannot be isolated, as there is only a single CPU core. Hence enabling CPU isolation by default on such systems does not make much sense. Instead of changing the default for !SMP, fix this by making the feature depend on SMP, with an override for compile-testing. Note that its sole selector (NO_HZ_FULL) already depends on SMP. This decreases kernel size for a default uniprocessor kernel by ca. 1 KiB. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NNicolas Pitre <nico@linaro.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2c43838c ("sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default") Link: http://lkml.kernel.org/r/1514891590-20782-1-git-send-email-geert@linux-m68k.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 12月, 2017 1 次提交
-
-
由 Frederic Weisbecker 提交于
The "isolcpus=" boot parameter support was always built-in before we moved the related code under CONFIG_CPU_ISOLATION. Having it disabled by default is very confusing for people accustomed to use this parameter. So enable it by dafault to keep the previous behaviour but keep it optable for those who want to tinify their kernels. Signed-off-by: NFrederic Weisbecker <frederic@kernel.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kernel test robot <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/1513275507-29200-3-git-send-email-frederic@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 11月, 2017 1 次提交
-
-
由 Randy Dunlap 提交于
Clean up the EXPERT menu (yet again). Move FHANDLE and CHECKPOINT_RESTORE into the primary EXPERT menu since they already depend on EXPERT. Move BPF_SYSCALL and USERFAULTFD out of the EXPERT Kconfig symbols menu list since they do not depend on EXPERT and were breaking the continuity of that menu list. Move all of the KALLSYMS Kconfig symbols to the end of the EXPERT menu. This separates the kernel services from the build options. This patch depends on [PATCH] pci: move PCI_QUIRKS to the PCI bus menu (https://lkml.org/lkml/2017/11/2/907). Link: http://lkml.kernel.org/r/72e4465a-a5ff-cb3c-1a90-11aa4861b161@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> [BPF] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 11月, 2017 1 次提交
-
-
由 Yang Shi 提交于
According to discussion with Christoph (https://marc.info/?l=linux-kernel&m=150695909709711&w=2), it sounds like it is pointless to keep CONFIG_SLABINFO around. This patch removes the CONFIG_SLABINFO config option, but /proc/slabinfo is still available. [yang.s@alibaba-inc.com: v11] Link: http://lkml.kernel.org/r/1507656303-103845-3-git-send-email-yang.s@alibaba-inc.com Link: http://lkml.kernel.org/r/1507152550-46205-3-git-send-email-yang.s@alibaba-inc.comSigned-off-by: NYang Shi <yang.s@alibaba-inc.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 11月, 2017 1 次提交
-
-
由 Randy Dunlap 提交于
Localize PCI_QUIRKS in the PCI bus menu. Move PCI_QUIRKS to the PCI bus menu instead of the (often broken) General Setup EXPERT menu. The prompt still depends on EXPERT. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 27 10月, 2017 2 次提交
-
-
由 Frederic Weisbecker 提交于
We want to centralize the isolation management, done by the housekeeping subsystem. Therefore we need to handle the nohz_full= parameter from there. Since nohz_full= so far has involved unbound timers, watchdog, RCU and tilegx NAPI isolation, we keep that default behaviour. nohz_full= will be deprecated in the future. We want to control the isolation features from the isolcpus= parameter. Signed-off-by: NFrederic Weisbecker <frederic@kernel.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1509072159-31808-10-git-send-email-frederic@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Frederic Weisbecker 提交于
Split the housekeeping config from CONFIG_NO_HZ_FULL. This way we finally separate the isolation code from NOHZ. Although a dependency to CONFIG_NO_HZ_FULL remains for now, while the housekeeping code still deals with NOHZ internals. Signed-off-by: NFrederic Weisbecker <frederic@kernel.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1509072159-31808-8-git-send-email-frederic@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 12 10月, 2017 1 次提交
-
-
由 Nathan Chancellor 提交于
This was moved in commit 94e980cc ("Documentation/module-signing.txt: convert to ReST markup") and was missed by commit 8c27ceff ("docs: fix locations of several documents that got moved"). Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 10月, 2017 1 次提交
-
-
由 Ulf Magnusson 提交于
The choice containing the CC_OPTIMIZE_FOR_PERFORMANCE symbol accidentally added a "CONFIG_" prefix when trying to make it the default, selecting an undefined symbol as the default. The mistake is harmless here: Since the default symbol is not visible, the choice falls back on using the visible symbol as the default instead, which is CC_OPTIMIZE_FOR_PERFORMANCE, as intended. A patch that makes Kconfig print a warning in this case has been submitted separately: http://www.spinics.net/lists/linux-kbuild/msg15566.htmlSigned-off-by: NUlf Magnusson <ulfalizer@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 07 9月, 2017 1 次提交
-
-
由 Kees Cook 提交于
This SLUB free list pointer obfuscation code is modified from Brad Spengler/PaX Team's code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. This adds a per-cache random value to SLUB caches that is XORed with their freelist pointer address and value. This adds nearly zero overhead and frustrates the very common heap overflow exploitation method of overwriting freelist pointers. A recent example of the attack is written up here: http://cyseclabs.com/blog/cve-2016-6187-heap-off-by-one-exploit and there is a section dedicated to the technique the book "A Guide to Kernel Exploitation: Attacking the Core". This is based on patches by Daniel Micay, and refactored to minimize the use of #ifdef. With 200-count cycles of "hackbench -g 20 -l 1000" I saw the following run times: before: mean 10.11882499999999999995 variance .03320378329145728642 stdev .18221905304181911048 after: mean 10.12654000000000000014 variance .04700556623115577889 stdev .21680767106160192064 The difference gets lost in the noise, but if the above is to be taken literally, using CONFIG_FREELIST_HARDENED is 0.07% slower. Link: http://lkml.kernel.org/r/20170802180609.GA66807@beastSigned-off-by: NKees Cook <keescook@chromium.org> Suggested-by: NDaniel Micay <danielmicay@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tycho Andersen <tycho@docker.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2017 1 次提交
-
-
由 Nicolas Pitre 提交于
This makes it possible to preserve basic futex support and compile out the PI support when RT mutexes are not available. Signed-off-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708010024190.5981@knanqh.ubzr
-