- 24 7月, 2015 13 次提交
-
-
由 Peter Hurley 提交于
OMAP h/w-assisted IXON flow control is borked. The transmitter becomes stuck if XON is never received; clearing the fifos or resetting the rx flow control bits has no effect. Remove auto-IXANY as well, since without auto-IXON, it has no purpose. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sekhar Nori 提交于
Due to Advisory 21 as documented in AM437x errata document, UART module cannot be disabled once DMA is used. The only workaround is to softreset the module before disabling it. DRA7x UARTs are compatible to AM437x UARTs in terms of this errata and prescribed workaround. Enable usage of workaround for this errata on DRA7x SoCs. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sekhar Nori 提交于
AM335x, AM437x and DRA7x SoCs have an errata[1] due to which UART cannot be idled after it has been used with DMA. OMAP3 has a similar sounding errata which has been worked around in a2fc3661 ("ARM: OMAP3: Use manual idle for UARTs because of DMA errata"). But the workaround used there does not apply to AM335x, AM437x SoCs. After using DMA, the UART module on these SoCs must be soft reset to go to idle. This patch implements that errata workaround. It is expected that UART will be used with DMA so no explicit check for DMA usage has been added for errata applicability. MDR1 register needs to be restored right after soft-reset because "UART mode" must be set in that register for module wake-up on AM335x to work. As a result, SCR register is now used to determine if context was lost during sleep. [1] See Advisory 21 in AM437x errata SPRZ408B, updated April 2015. http://www.ti.com/lit/er/sprz408b/sprz408b.pdfSigned-off-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sekhar Nori 提交于
Use of of_machine_is_compatible() for handling AM335x specific "DMA kick" quirk in 8250_omap driver makes it ugly to extend the quirk for other platforms. Instead use a new compatible. The new compatible will also make it easier to take care of other quirks on AM335x and like SoCs. In order to not break backward DTB compatibility for users of 8250_omap driver on AM335x based boards, existing use of of_machine_is_compatible() has not been removed. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sekhar Nori 提交于
The silicon errata[1] workaround implemented in a follow-on patch, "serial: 8250_omap: workaround errata on disabling UART after using DMA", requires MDR1 register programming. Extract MDR1 register update into helper function, omap8250_update_mdr1() to help with that. [1] Advisory 21 in http://www.ti.com/lit/er/sprz408b/sprz408b.pdfSigned-off-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sekhar Nori 提交于
The compatible "ti,am4372-uart" is used in arch/arm/boot/dts/am4372.dtsi but not documented. Add necessary documentation. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sekhar Nori 提交于
omap_device infrastructure has a suspend_noirq hook which runtime suspends all devices late in the suspend cycle (see _od_suspend_noirq() in arch/arm/mach-omap2/omap_device.c) This leads to a NULL pointer exception in 8250_omap driver since by the time omap8250_runtime_suspend() is called, 8250_dma driver has already set rxchan to NULL via serial8250_release_dma(). Make an explicit check to see if rxchan is NULL in runtime_{suspend|resume} hooks to fix this. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ricardo Ribalda Delgado 提交于
Fintek chip can be configured for io addresses different than the standard. Query the chip for the configured addresses and try to match it with the pnp address. Reported-by: NPeter Hong <peter_hong@fintek.com.tw> Reviewed-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ricardo Ribalda Delgado 提交于
Chip can be configured to use entry key different than 0x77. Try all the valid keys until one gives out the right chip id. Reported-by: NPeter Hong <peter_hong@fintek.com.tw> Reviewed-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ricardo Ribalda Delgado 提交于
There are some chips with the same interface but different chip ip. Reported-by: NPeter Hong <peter_hong@fintek.com.tw> Reviewed-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ricardo Ribalda Delgado 提交于
Fintek chip can be connected at address 0x4e and also 0x2e. Add some logic to find out the address of the chip. Reported-by: NPeter Hong <peter_hong@fintek.com.tw> Reviewed-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ricardo Ribalda Delgado 提交于
Save the port index and the line id in a private structure. Reported-by: NPeter Hong <peter_hong@fintek.com.tw> Reviewed-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Vaishali Thakkar 提交于
In little endian cases, macro htons unfolds to __swab16 which provides special case for constants. In big endian cases, __constant_htons and htons expand directly to the same expression. So, replace __constant_htons with htons with the goal of getting rid of the definition of __constant_htons completely. The semantic patch that performs this transformation is as follows: @@expression x;@@ - __constant_htons(x) + htons(x) Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 7月, 2015 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Two fairly simple fixes: one is a change that causes us to have a very low queue depth leading to performance issues and the other is a null deref occasionally in tapes thanks to use after put" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fix host max depth checking for the 'queue_depth' sysfs interface st: null pointer dereference panic caused by use after kref_put by st_open
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. Things are looking quite decent at this stage but the recent work on the FPU support took its toll: - fix an incorrect overly restrictive ifdef - select O32 64-bit FP support for O32 binary compatibility - remove workarounds for Sibyte SB1250 Pass1 parts. There are rare fixing the workarounds is not worth the effort. - patch up an outdated and now incorrect comment" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU MIPS: SB1: Remove support for Pass 1 parts. MIPS: Require O32 FP64 support for MIPS64 with O32 compat MIPS: asm-offset.c: Patch up various comments refering to the old filename.
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fix from Helge Deller: "A memory leak fix from Christophe Jaillet which was introduced with kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days" * 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: mm: Fix a memory leak related to pmd not attached to the pgd
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "By far most of the fixes here are updates to DTS files to deal with some mostly minor bugs. There's also a fix to deal with non-PM kernel configs on i.MX, a regression fix for ethernet on PXA platforms and a dependency fix for OMAP" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: dts: rename pcie nodes to help override status ARM: keystone: dts: fix dt bindings for PCIe ARM: pxa: fix dm9000 platform data regression ARM: dts: Correct audio input route & set mic bias for am335x-pepper ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX MAINTAINERS: digicolor: add dts files ARM: ux500: fix MMC/SD card regression ARM: ux500: define serial port aliases ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs ARM: dts: Fix frequency scaling on Gumstix Pepper ARM: dts: configure regulators for Gumstix Pepper ARM: dts: omap3: overo: Update LCD panel names ARM: dts: cros-ec-keyboard: Add support for some Japanese keys ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set ARM: dts: imx53-qsb: fix TVE entry ARM: dts: mx23: fix iio-hwmon support ARM: dts: imx27: Adjust the GPT compatible string ARM: socfpga: dts: Fix entries order ARM: socfpga: dts: Fix adxl34x formating and compatible string
-
- 19 7月, 2015 10 次提交
-
-
由 Markos Chandras 提交于
Commit 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Fixes: 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by: NPaul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Christophe Jaillet 提交于
Commit 0e0da48d ("parisc: mm: don't count preallocated pmds") introduced a memory leak. After this commit, the 'return' statement in pmd_free is executed in all cases. Even for pmd that are not attached to the pgd. So 'free_pages' can never be called anymore, leading to a memory leak. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NMikulas Patocka <mpatocka@redhat.com> Acked-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
https://github.com/rjarzmik/linux由 Olof Johansson 提交于
Merge "pxa fixes for v4.2" from Robert Jarzmik: ARM: pxa: fixes for v4.2-rc2 This single fix reenables ethernet cards for several pxa boards, broken by regulator addition to dm9000 driver. * tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux: ARM: pxa: fix dm9000 platform data regression
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A small set of ARM fixes for -rc3, most of them not far off one-liners, with the exception of fixing the V7 cache invalidation for incoming SMP processors which was causing problems for SoCFPGA devices" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: fix __virt_to_idmap build error on !MMU ARM: invalidate L1 before enabling coherency ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check ARM: 8402/1: perf: Don't use of_node after putting it ARM: 8400/1: use virt_to_idmap to get phys_reset address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Two families of fixes: - Fix an FPU context related boot crash on newer x86 hardware with larger context sizes than what most people test. To fix this without ugly kludges or extensive reverts we had to touch core task allocator, to allow x86 to determine the task size dynamically, at boot time. I've tested it on a number of x86 platforms, and I cross-built it to a handful of architectures: (warns) (warns) testing x86-64: -git: pass ( 0), -tip: pass ( 0) testing x86-32: -git: pass ( 0), -tip: pass ( 0) testing arm: -git: pass ( 1359), -tip: pass ( 1359) testing cris: -git: pass ( 1031), -tip: pass ( 1031) testing m32r: -git: pass ( 1135), -tip: pass ( 1135) testing m68k: -git: pass ( 1471), -tip: pass ( 1471) testing mips: -git: pass ( 1162), -tip: pass ( 1162) testing mn10300: -git: pass ( 1058), -tip: pass ( 1058) testing parisc: -git: pass ( 1846), -tip: pass ( 1846) testing sparc: -git: pass ( 1185), -tip: pass ( 1185) ... so I hope the cross-arch impact 'none', as intended. (by Dave Hansen) - Fix various NMI handling related bugs unearthed by the big asm code rewrite and generally make the NMI code more robust and more maintainable while at it. These changes are a bit late in the cycle, I hope they are still acceptable. (by Andy Lutomirski)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86 x86/fpu, sched: Dynamically allocate 'struct fpu' x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code x86/nmi/64: Make the "NMI executing" variable more consistent x86/nmi/64: Minor asm simplification x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection x86/nmi/64: Reorder nested NMI checks x86/nmi/64: Improve nested NMI comments x86/nmi/64: Switch stacks on userspace NMI entry x86/nmi/64: Remove asm code that saves CR2 x86/nmi: Enable nested do_nmi() handling for 64-bit kernels
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Ingo Molnar: "Fix for a misplaced export that can cause build failures in certain (rare) Kconfig situations" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Move the export of tick_broadcast_oneshot_control to the proper place
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Ingo Molnar: "A oneliner rq throttling fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Test list head instead of list entry in throttle_cfs_rq()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Really allow to specify custom CC, AR or LD perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT perf hists browser: Take the --comm, --dsos, etc filters into account perf symbols: Store if there is a filter in place x86, perf: Fix static_key bug in load_mm_cr4() tools: Copy lib/hweight.c from the kernel sources perf tools: Fix the detached tarball wrt rbtree copy perf thread_map: Fix the sizeof() calculation for map entries tools lib: Improve clean target perf stat: Fix shadow declaration of close perf tools: Fix lockup using 32-bit compat vdso
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Ingo Molnar: "Misc irq fixes: - two driver fixes - a Xen regression fix - a nested irq thread crash fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gicv3-its: Fix mapping of LPIs to collections genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now gpio/davinci: Fix race in installing chained irq handler
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "25 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits) lib/decompress: set the compressor name to NULL on error mm/cma_debug: correct size input to bitmap function mm/cma_debug: fix debugging alloc/free interface mm/page_owner: set correct gfp_mask on page_owner mm/page_owner: fix possible access violation fsnotify: fix oops in fsnotify_clear_marks_by_group_flags() /proc/$PID/cmdline: fixup empty ARGV case dma-debug: skip debug_dma_assert_idle() when disabled hexdump: fix for non-aligned buffers checkpatch: fix long line messages about patch context mm: clean up per architecture MM hook header files MAINTAINERS: uclinux-h8-devel is moderated for non-subscribers mailmap: update Sudeep Holla's email id Update Viresh Kumar's email address mm, meminit: suppress unused memory variable warning configfs: fix kernel infoleak through user-controlled format string include, lib: add __printf attributes to several function prototypes s390/hugetlb: add hugepages_supported define mm: hugetlb: allow hugepages_supported to be architecture specific revert "s390/mm: make hugepages_supported a boot time decision" ...
-
- 18 7月, 2015 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "These are all from Filipe, and cover a few problems we've had reported on the list recently (along with ones he found on his own)" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix file corruption after cloning inline extents Btrfs: fix order by which delayed references are run Btrfs: fix list transaction->pending_ordered corruption Btrfs: fix memory leak in the extent_same ioctl Btrfs: fix shrinking truncate when the no_holes feature is enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull rtc fixes from Alexandre Belloni: "A few fixes for the RTC susbsystem for 4.2. The mt6397 driver was introduce in 4.2 so it is worth fixing before the final release. I though the compilation warning for armada38x was fixed by akpm in commit f98b733e ("rtc-armada38x.c: remove unused local `flags'") but he actually missed some occurrences of the variables. Since I received 4 patches for that, I think we can include it now. Summary: - fix mt6397 wakealarm creation - remove a compilation warning for armada38x that was forgotten" * tag 'rtc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: armada38x: Remove unused variable from armada38x_rtc_set_time() rtc: mt6397: enable wakeup before registering rtc device
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: - revert a request-based DM core change that caused IO latency to increase and adversely impact both throughput and system load - fix for a use after free bug in DM core's device cleanup - a couple DM btree removal fixes (used by dm-thinp) - a DM thinp fix for order-5 allocation failure - a DM thinp fix to not degrade to read-only metadata mode when in out-of-data-space mode for longer than the 'no_space_timeout' - fix a long-standing oversight in both dm-thinp and dm-cache by now exporting 'needs_check' in status if it was set in metadata - fix an embarrassing dm-cache busy-loop that caused worker threads to eat cpu even if no IO was actively being issued to the cache device * tag 'dm-4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: avoid calls to prealloc_free_structs() if possible dm cache: avoid preallocation if no work in writeback_some_dirty_blocks() dm cache: do not wake_worker() in free_migration() dm cache: display 'needs_check' in status if it is set dm thin: display 'needs_check' in status if it is set dm thin: stay in out-of-data-space mode once no_space_timeout expires dm: fix use after free crash due to incorrect cleanup sequence Revert "dm: only run the queue on completion if congested or no requests pending" dm btree: silence lockdep lock inversion in dm_btree_del() dm thin: allocate the cell_sort_array dynamically dm btree remove: fix bug in redistribute3
-
由 Ingo Molnar 提交于
Don't burden architectures without dynamic task_struct sizing with the overhead of dynamic sizing. Also optimize the x86 code a bit by caching task_struct_size. Acked-and-Tested-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dave Hansen 提交于
The FPU rewrite removed the dynamic allocations of 'struct fpu'. But, this potentially wastes massive amounts of memory (2k per task on systems that do not have AVX-512 for instance). Instead of having a separate slab, this patch just appends the space that we need to the 'task_struct' which we dynamically allocate already. This saves from doing an extra slab allocation at fork(). The only real downside here is that we have to stick everything and the end of the task_struct. But, I think the BUILD_BUG_ON()s I stuck in there should keep that from being too fragile. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Aneesh Kumar K.V 提交于
Without this we end up using the previous name of the compressor in the loop in unpack_rootfs. For example we get errors like "compression method gzip not configured" even when we have CONFIG_DECOMPRESS_GZIP enabled. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
In CMA, 1 bit in bitmap means 1 << order_per_bits pages so size of bitmap is cma->count >> order_per_bits rather than just cma->count. This patch fixes it. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Stefan Strogin <stefan.strogin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
CMA has alloc/free interface for debugging. It is intended that alloc/free occurs in specific CMA region, but, currently, alloc/free interface is on root dir due to the bug so we can't select CMA region where alloc/free happens. This patch fixes this problem by making alloc/free interface per CMA region. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Stefan Strogin <stefan.strogin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Currently, we set wrong gfp_mask to page_owner info in case of isolated freepage by compaction and split page. It causes incorrect mixed pageblock report that we can get from '/proc/pagetypeinfo'. This metric is really useful to measure fragmentation effect so should be accurate. This patch fixes it by setting correct information. Without this patch, after kernel build workload is finished, number of mixed pageblock is 112 among roughly 210 movable pageblocks. But, with this fix, output shows that mixed pageblock is just 57. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
When I tested my new patches, I found that page pointer which is used for setting page_owner information is changed. This is because page pointer is used to set new migratetype in loop. After this work, page pointer could be out of bound. If this wrong pointer is used for page_owner, access violation happens. Below is error message that I got. BUG: unable to handle kernel paging request at 0000000000b00018 IP: [<ffffffff81025f30>] save_stack_address+0x30/0x40 PGD 1af2d067 PUD 166e0067 PMD 0 Oops: 0002 [#1] SMP ...snip... Call Trace: print_context_stack+0xcf/0x100 dump_trace+0x15f/0x320 save_stack_trace+0x2f/0x50 __set_page_owner+0x46/0x70 __isolate_free_page+0x1f7/0x210 split_free_page+0x21/0xb0 isolate_freepages_block+0x1e2/0x410 compaction_alloc+0x22d/0x2d0 migrate_pages+0x289/0x8b0 compact_zone+0x409/0x880 compact_zone_order+0x6d/0x90 try_to_compact_pages+0x110/0x210 __alloc_pages_direct_compact+0x3d/0xe6 __alloc_pages_nodemask+0x6cd/0x9a0 alloc_pages_current+0x91/0x100 runtest_store+0x296/0xa50 simple_attr_write+0xbd/0xe0 __vfs_write+0x28/0xf0 vfs_write+0xa9/0x1b0 SyS_write+0x46/0xb0 system_call_fastpath+0x16/0x75 This patch fixes this error by moving up set_page_owner(). Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Acked-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
fsnotify_clear_marks_by_group_flags() can race with fsnotify_destroy_marks() so when fsnotify_destroy_mark_locked() drops mark_mutex, a mark from the list iterated by fsnotify_clear_marks_by_group_flags() can be freed and we dereference free memory in the loop there. Fix the problem by keeping mark_mutex held in fsnotify_destroy_mark_locked(). The reason why we drop that mutex is that we need to call a ->freeing_mark() callback which may acquire mark_mutex again. To avoid this and similar lock inversion issues, we move the call to ->freeing_mark() callback to the kthread destroying the mark. Signed-off-by: NJan Kara <jack@suse.cz> Reported-by: NAshish Sangwan <a.sangwan@samsung.com> Suggested-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
/proc/*/cmdline code checks if it should look at ENVP area by checking last byte of ARGV area: rv = access_remote_vm(mm, arg_end - 1, &c, 1, 0); if (rv <= 0) goto out_free_page; If ARGV is somehow made empty (by doing execve(..., NULL, ...) or manually setting ->arg_start and ->arg_end to equal values), the decision will be based on byte which doesn't even belong to ARGV/ENVP. So, quickly check if ARGV area is empty and report 0 to match previous behaviour. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-