- 06 11月, 2005 1 次提交
-
-
由 Michael Chan 提交于
Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 11月, 2005 1 次提交
-
-
由 Calin A. Culianu 提交于
This adds support for the Nvidia Geforce 7800 series of cards to the nvidiafb framebuffer driver. All it does is add the PCI device id for the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work on these cards. I also added the relevant PCI device ids to linux/pci_ids.h I tested it on my 7800 GTX here and it works like a charm. I now can get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text mode to make your eyes BLEED. ;) Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2005 6 次提交
-
-
由 Alan Stern 提交于
This revised patch (as586b) makes usb-handoff permanently true and no longer a kernel boot parameter. It also removes the piix3_usb quirk code; that was nothing more than an early version of the USB handoff code (written at a time when Intel's PIIX3 was about the only motherboard with USB support). And it adds identifiers for the three PCI USB controller classes to pci_ids.h. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Coady 提交于
pci_ids.h cleanup: convert // comment to /* comment */ Signed-off-by: NGrant Coady <gcoady@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
I told you that the pci_ids.h cleanup was a bad idea ;) Cc: Alan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Coady 提交于
pci_ids.h cleanup: removed non-referenced symbols, compile tested with 'make allmodconfig' Signed-off-by: NGrant Coady <gcoady@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> include/linux/pci_ids.h | 540 ------------------------------------------------ 1 file changed, 540 deletions(-)
-
由 Grant Coady 提交于
pci_ids.h cleanup: remove duplicated entries and change some defines to explicit value rather than in terms of another constant, preparation for removing unused symbols Signed-off-by: NGrant Coady <gcoady@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> include/linux/pci_ids.h | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-)
-
由 Michael Chan 提交于
Add complete support for 5714/5715. These chips are very similar to 5780 so the changes are very trivial. A TG3_FLG2_5780_CLASS flag is added to identify these chips. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 25 10月, 2005 2 次提交
-
-
由 Justin Chen 提交于
Add the new ID 0x132a and configure the new PCI Diva console port. This device supports only 1 single console UART. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bjorn Helgaas 提交于
Tested by Wolfgang Denk with this device: 00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Exsys EX-4055 4S(16C550) RS-232 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at 7080 [size=128] Region 2: I/O ports at 7400 [size=32] 00:0f.0 Class 0280: 10b5:9050 (rev 01) Subsystem: d84d:4055 Results with this patch: Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 0000:00:0f.0 ttyS4 at I/O 0x7400 (irq = 10) is a 16550A ttyS5 at I/O 0x7408 (irq = 10) is a 16550A ttyS6 at I/O 0x7410 (irq = 10) is a 16550A ttyS7 at I/O 0x7418 (irq = 10) is a 16550A Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 9月, 2005 1 次提交
-
-
由 David S. Miller 提交于
Written by Adrian Sun (asun@darksunrising.com). Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>. Further cleaned up and integrated by David S. Miller Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 9月, 2005 1 次提交
-
-
由 Bagalkote, Sreenivas 提交于
Signed-off-by: NSreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 26 9月, 2005 2 次提交
-
-
由 Daniel Ritz 提交于
Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 22 9月, 2005 1 次提交
-
-
由 Andy Currid 提交于
Signed-off-by: NAndy Currid <acurrid@nvidia.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 17 9月, 2005 3 次提交
-
-
由 David S. Miller 提交于
Thanks to Andy Stewart for the report and testing debug patches from Michael Chan. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Keil 提交于
Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Karsten Keil 提交于
Sitecom DC-105 PCI work with hfc_pci HiSax driver Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 9月, 2005 1 次提交
-
-
由 Roland Dreier 提交于
While doing an allyesconfig build, I noticed that the commit commit 8cdfd251 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 9月, 2005 1 次提交
-
-
由 Mike Miller 提交于
This patch adds new PCI and subsystem ID's that finally made the spec. It also include a name change for one controller. I know there's a lot of duplicat names but the fw folks wanted this for the different implementations. Even though the same ASIC is used it may be embedded on some platforms, standup card in others, and a mezzanine in other servers. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 9月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 9月, 2005 1 次提交
-
-
由 Jens Osterkamp 提交于
This patch adds a driver for a new 1000 Mbit ethernet NIC. It is integrated on the south bridge that is used for our Cell Blades. The code gets the MAC address from the Open Firmware device tree, so it won't compile on platforms other than ppc64. This is the first public release, so I don't expect the first version to get merged, but I'd aim for integration within the 2.6.13 time frame. Cc: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 05 9月, 2005 1 次提交
-
-
由 Ralf Baechle 提交于
- MIPS Denmark does no longer exist; the PCI vendor ID is now owned by MIPS Technologies. - Add ID for SOC-it, MIPS's system controller. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 19 8月, 2005 3 次提交
-
-
由 Narendra Sankar 提交于
BCM5785 (HT1000) is a Opteron Southbridge from Serverworks/Broadcom that incorporates a single channel ATA100 IDE controller that is functionally identical to the Serverworks CSB6 IDE controller. This patch adds support for the new PCI device ID and also the support for this controller. Signed-off-by: NNarendra Sankar <nsankar@broadcom.com> Acked-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
由 Matt Gillette 提交于
Adds support for Netcell Revolution to pci-ide generic driver by including it in the list of devices matched. Includes the Revolution in the list of simplex devices forced into DMA mode. Signed-off-by: NMatt Gillette <matt.gillette@netcell.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
由 Grant Coady 提交于
Signed-off-by: NGrant Coady <gcoady@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
- 17 8月, 2005 1 次提交
-
-
由 Kristen Accardi 提交于
On the 6700/6702 PXH part, a MSI may get corrupted if an ACPI hotplug driver and SHPC driver in MSI mode are used together. This patch will prevent MSI from being enabled for the SHPC as part of an early pci quirk, as well as on any pci device which sets the no_msi bit. Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 7月, 2005 1 次提交
-
-
由 Daniel Drake 提交于
This is a multi-part message in MIME format. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 28 7月, 2005 1 次提交
-
-
由 Olivier Blin 提交于
This patch adds support for the Olitec ISDN PCI card in the hisax gazel driver. The gazel driver supports this card, but wasn't aware of its PCI ids. Users used to modify the PCI ids of a supported card in include/linux/pci_ids.h and recompile their kernel to get this card running, as said in most Howtos. This patch makes the hisax gazel driver recognize the PCI ids of the Olitec ISDN PCI card. Signed-off-by: NOlivier Blin <oblin@mandriva.com> Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 7月, 2005 1 次提交
-
-
由 Michael Chan 提交于
Add 5780 PCI IDs, chip IDs, and other basic support. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2005 1 次提交
-
-
由 Andrey Panin 提交于
Add support for SIIG Quartet Serial card. This card has Oxford Semiconducor 16954 quad UART which is clocked by 10x faster (18.432 MHz) quartz. Signed-off-by: NAndrey Panin <pazke@donpac.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 7月, 2005 1 次提交
-
-
由 Andrew Vasquez 提交于
Add pci ids for new ISP types. Move old definitions in local qla_def.h file to pci_ids.h as well. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 03 7月, 2005 1 次提交
-
-
由 Rob Punkunus 提交于
From: Rob Punkunus <rpunkunus@nvidia.com> Rob Punkunus recently submitted a patch to enable support for MCP51/MCP55 in the amd74xx driver. This patch was whitespace-corrupted and didn't apply to 2.6.12 since MCP51 support was merged in the 2.6.12-rc series. Gentoo would like to support this hardware for our upcoming release media, so I fixed the patch, and here it is :) Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
- 28 6月, 2005 3 次提交
-
-
由 Kenji Kaneshige 提交于
This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs under the root bridge are hot-added by this patch. Hot-remove support is TBD. Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
This lets you throw out the iteraid stuff that has ended up back in due to stupid goings on in the IDE world. Its the same heavily tested code shipped in Fedora/Red Hat products but without the other dependancies on the Bartlomiej IDE layer. Pre-requisite: the ide-disk patch I sent to handle pure LBA devices. Obviously you lose things like hot unplug with the Bartlomiej IDE layer at the moment but that won't matter to most users. The patch does the following - Add IT8211/12 to pci_ids.h - Add Makefile/Kconfig entry - Add it8212 driver No core IDE code is touched by this diff Embedded system testing and the ability to force raid mode off by David Howells Made possible by the ite reference code, documentation and also several clarifications and pieces of assistance provided by ITE themselves Signed-off-by: NAlan Cox <alan@redhat.com> Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch fixes a PCI ID I got wrong before. It also adds support for another new SAS controller due out this summer. I didn't have a marketing name prior to my last submission. Also modifies the copyright date range. Signed-off-by: NMike Miller <mike.miller@hp.com> Acked-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2005 1 次提交
-
-
由 Manfred Spraul 提交于
This is a multi-part message in MIME format.
-
- 24 6月, 2005 1 次提交
-
-
由 Kylene Hall 提交于
Add support for TPMs on additional LPC buses. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2005 1 次提交
-
-
由 Scott Bardone 提交于
- Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
-
- 22 6月, 2005 1 次提交
-
-
由 James Simmons 提交于
Patch adds pci ID for CT 69000 chipset. Signed-off-by: NJames Simmons <jsimmons@www.infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-