- 15 5月, 2019 40 次提交
-
-
由 Waiman Long 提交于
The maximum number of unique System V IPC identifiers was limited to 32k. That limit should be big enough for most use cases. However, there are some users out there requesting for more, especially those that are migrating from Solaris which uses 24 bits for unique identifiers. To satisfy the need of those users, a new boot time kernel option "ipcmni_extend" is added to extend the IPCMNI value to 16M. This is a 512X increase which should be big enough for users out there that need a large number of unique IPC identifier. The use of this new option will change the pattern of the IPC identifiers returned by functions like shmget(2). An application that depends on such pattern may not work properly. So it should only be used if the users really need more than 32k of unique IPC numbers. This new option does have the side effect of reducing the maximum number of unique sequence numbers from 64k down to 128. So it is a trade-off. The computation of a new IPC id is not done in the performance critical path. So a little bit of additional overhead shouldn't have any real performance impact. Link: http://lkml.kernel.org/r/20190329204930.21620-1-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com> Acked-by: NManfred Spraul <manfred@colorfullife.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
Our msg priorities became an rbtree as of d6629859 ("ipc/mqueue: improve performance of send/recv"). However, consuming a msg in msg_get() remains logarithmic (still being better than the case before of course). By applying well known techniques to cache pointers we can have the node with the highest priority in O(1), which is specially nice for the rt cases. Furthermore, some callers can call msg_get() in a loop. A new msg_tree_erase() helper is also added to encapsulate the tree removal and node_cache game. Passes ltp mq testcases. Link: http://lkml.kernel.org/r/20190321190216.1719-2-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
We already store the current task fo the new waiter before calling wq_sleep() in both send and recv paths. Trivially remove the redundant assignment. Link: http://lkml.kernel.org/r/20190321190216.1719-1-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Rongqing 提交于
msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is enabled on large memory SMP systems, the pages initialization can take a long time, if msgctl10 requests a huge block memory, and it will block rcu scheduler, so release cpu actively. After adding schedule() in free_msg, free_msg can not be called when holding spinlock, so adding msg to a tmp list, and free it out of spinlock rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505 rcu: Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978 rcu: (detected by 11, t=35024 jiffies, g=44237529, q=16542267) msgctl10 R running task 21608 32505 2794 0x00000082 Call Trace: preempt_schedule_irq+0x4c/0xb0 retint_kernel+0x1b/0x2d RIP: 0010:__is_insn_slot_addr+0xfb/0x250 Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48 RSP: 0018:ffff88bce041f758 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: dffffc0000000000 RBX: ffffffff8471bc50 RCX: ffffffff828a2a57 RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88bce041f780 RBP: ffff88bce041f828 R08: ffffed15f3f4c5b3 R09: ffffed15f3f4c5b3 R10: 0000000000000001 R11: ffffed15f3f4c5b2 R12: 000000318aee9b73 R13: ffffffff8471bc50 R14: 1ffff1179c083ef0 R15: 1ffff1179c083eec kernel_text_address+0xc1/0x100 __kernel_text_address+0xe/0x30 unwind_get_return_address+0x2f/0x50 __save_stack_trace+0x92/0x100 create_object+0x380/0x650 __kmalloc+0x14c/0x2b0 load_msg+0x38/0x1a0 do_msgsnd+0x19e/0xcf0 do_syscall_64+0x117/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170 rcu: (detected by 14, t=35016 jiffies, g=44237525, q=12423063) msgctl10 R running task 21608 32170 32155 0x00000082 Call Trace: preempt_schedule_irq+0x4c/0xb0 retint_kernel+0x1b/0x2d RIP: 0010:lock_acquire+0x4d/0x340 Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82 RSP: 0018:ffff88af83417738 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: dffffc0000000000 RBX: ffff88bd335f3080 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88bd335f3d64 RBP: ffff88af83417758 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed13f3f745b2 R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 is_bpf_text_address+0x32/0xe0 kernel_text_address+0xec/0x100 __kernel_text_address+0xe/0x30 unwind_get_return_address+0x2f/0x50 __save_stack_trace+0x92/0x100 save_stack+0x32/0xb0 __kasan_slab_free+0x130/0x180 kfree+0xfa/0x2d0 free_msg+0x24/0x50 do_msgrcv+0x508/0xe60 do_syscall_64+0x117/0x400 entry_SYSCALL_64_after_hwframe+0x49/0xbe Davidlohr said: "So after releasing the lock, the msg rbtree/list is empty and new calls will not see those in the newly populated tmp_msg list, and therefore they cannot access the delayed msg freeing pointers, which is good. Also the fact that the node_cache is now freed before the actual messages seems to be harmless as this is wanted for msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the info->lock the thing is freed anyway so it should not change things" Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.comSigned-off-by: NLi RongQing <lirongqing@baidu.com> Signed-off-by: NZhang Yu <zhangyu31@baidu.com> Reviewed-by: NDavidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leonard Crestez 提交于
The clk rate is always stored in clk_core but might be out of date and require calls to update from hardware. Deal with that case by printing a (c) suffix. Link: http://lkml.kernel.org/r/1a474318982a5f0125f2360c4161029b17f56bd1.1556881728.git.leonard.crestez@nxp.comSigned-off-by: NLeonard Crestez <leonard.crestez@nxp.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leonard Crestez 提交于
An incorrect argument to list_for_each is an internal error in gdb scripts so a TypeError should be raised. The gdb.GdbError exception type is intended for user errors such as incorrect invocation. Drop the type assertion in list_for_each_entry because list_for_each isn't going to suddenly yield something else. Applies to both list and hlist Link: http://lkml.kernel.org/r/c1d3fd4db13d999a3ba57f5bbc1924862d824f61.1556881728.git.leonard.crestez@nxp.comSigned-off-by: NLeonard Crestez <leonard.crestez@nxp.com> Reviewed-by: NStephen Boyd <sboyd@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leonard Crestez 提交于
Finding an individual clk_core requires walking the tree which can be quite complicated so add a helper for easy access. (gdb) print *(struct clk_scu*)$lx_clk_core_lookup("uart0_clk")->hw Link: http://lkml.kernel.org/r/Message-ID: Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leonard Crestez 提交于
Add an lx-clk-summary command which prints a subset of /sys/kernel/debug/clk/clk_summary. This can be used to examine hangs caused by clk not being enabled. Link: http://lkml.kernel.org/r/Message-ID: Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leonard Crestez 提交于
This allows easily examining kernel hlists in python. Link: http://lkml.kernel.org/r/Message-ID: Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com> Reviewed-by: NStephen Boyd <sboyd@kernel.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
These scripts have some pep8 style warnings. Fix them up so that this directory is all pep8 clean. Link: http://lkml.kernel.org/r/20190329220844.38234-6-swboyd@chromium.orgSigned-off-by: NStephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Implement a command to print the timer list, much like how /proc/timer_list is implemented. This can be used to look at the pending timers on a crashed system. [swboyd@chromium.org: v2] Link: http://lkml.kernel.org/r/20190329220844.38234-5-swboyd@chromium.org Link: http://lkml.kernel.org/r/20190325184522.260535-5-swboyd@chromium.orgSigned-off-by: NStephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Implement gdb functions for rb_first(), rb_last(), rb_next(), and rb_prev(). These can be useful to iterate through the kernel's red-black trees. [swboyd@chromium.org: v2] Link: http://lkml.kernel.org/r/20190329220844.38234-4-swboyd@chromium.org Link: http://lkml.kernel.org/r/20190325184522.260535-4-swboyd@chromium.orgSigned-off-by: NStephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
lx-configdump <file> dumps the contents of the gzipped .config to a text file when the config is included in the kernel with CONFIG_IKCONFIG. By default, the file written is called config.txt, but it can be any user supplied filename as well. If the kernel config is in a module (configs.ko), then it can be loaded along with symbols for the module loaded with 'lx-symbols' and then this command will still work. Obviously if you have the whole vmlinux then this can also be achieved with scripts/extract-ikconfig, but this gdb script can be useful to confirm that the memory contents of the config in memory and the vmlinux contents on disk match what is expected. [swboyd@chromium.org: v2] Link: http://lkml.kernel.org/r/20190329220844.38234-3-swboyd@chromium.org Link: http://lkml.kernel.org/r/20190325184522.260535-3-swboyd@chromium.orgSigned-off-by: NStephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Patch series "gdb script for kconfig and timer list". This is a handful of changes to the kernel's gdb scripts to do some more debugging with kgdb. The first patch allows the vmlinux to be reloaded from where it was specified on the command line so that this set of scripts can be used from anywhere. The second patch adds a script to dump the config.gz to a file on the host debugging machine. The third patch adds some rb tree utilities and the last patch uses those rb tree walking utilities to dump out the contents of /proc/timer_list from a system under debug. This patch (of 5): If I run 'gdb <path/to/vmlinux>' and there's the vmlinux-gdb.py file there I can properly see symbols and use the lx commands provided by the GDB scripts. But once I run 'lx-symbols' at the command prompt, gdb reloads the vmlinux symbols assuming that this script was run from the directory that has vmlinux at the root. That isn't always true, but we could just look and see what symbols were already loaded and use that instead. Let's do that so this can work by being invoked anywhere. Link: http://lkml.kernel.org/r/20190325184522.260535-2-swboyd@chromium.orgSigned-off-by: NStephen Boyd <swboyd@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tom Burkart 提交于
This patch implements the PPS ECHO functionality for pps-gpio, that sysfs claims is available already. Configuration is done via device tree bindings. No changes are made to userspace interfaces. This patch was originally written by Lukas Senger as part of a masters thesis project and modified for inclusion into the linux kernel by Tom Burkart. Link: http://lkml.kernel.org/r/20190324043305.6627-4-tom@aussec.comSigned-off-by: NTom Burkart <tom@aussec.com> Acked-by: NRodolfo Giometti <giometti@enneenne.com> Signed-off-by: NLukas Senger <lukas@fridolin.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tom Burkart 提交于
This patch implements the device tree binding changes required for the PPS ECHO functionality for pps-gpio, that sysfs claims is available already. It adds two DT properties for configuring the PPS ECHO functionality. This patch is provided separated from the rest of the patch per Documentation/devicetree/bindings/submitting-patches.txt. This patch was originally written by Lukas Senger as part of a masters thesis project and modified for inclusion into the linux kernel by Tom Burkart. Link: http://lkml.kernel.org/r/20190324043305.6627-3-tom@aussec.comSigned-off-by: NTom Burkart <tom@aussec.com> Signed-off-by: NLukas Senger <lukas@fridolin.com> Acked-by: NRodolfo Giometti <giometti@enneenne.com> Reviewed-by: NRob Herring <robh@kernel.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tom Burkart 提交于
This patch changes the GPIO access for the pps-gpio driver from the integer based API to the descriptor based API. The integer based API is considered deprecated and the descriptor based API is the preferred way to access GPIOs as per Documentation/driver-api/gpio/intro.rst No changes are made to userspace interfaces. Link: http://lkml.kernel.org/r/20190324043305.6627-2-tom@aussec.comSigned-off-by: NTom Burkart <tom@aussec.com> Acked-by: NRodolfo Giometti <giometti@enneenne.com> Reviewed-by: NPhilipp Zabel <philipp.zabel@gmail.com> Cc: Lukas Senger <lukas@fridolin.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aaro Koskinen 提交于
Allow specifying reboot_mode for panic only. This is needed on systems where ramoops is used to store panic logs, and user wants to use warm reset to preserve those, while still having cold reset on normal reboots. Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fiSigned-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Feng Tang 提交于
When kernel panic happens, it will first print the panic call stack, then the ending msg like: [ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception [ 35.749975] ------------[ cut here ]------------ The above message are very useful for debugging. But if system is configured to not reboot on panic, say the "panic_timeout" parameter equals 0, it will likely print out many noisy message like WARN() call stack for each and every CPU except the panic one, messages like below: WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190 Call Trace: <IRQ> try_to_wake_up default_wake_function autoremove_wake_function __wake_up_common __wake_up_common_lock __wake_up wake_up_klogd_work_func irq_work_run_list irq_work_tick update_process_times tick_sched_timer __hrtimer_run_queues hrtimer_interrupt smp_apic_timer_interrupt apic_timer_interrupt For people working in console mode, the screen will first show the panic call stack, but immediately overridden by these noisy extra messages, which makes debugging much more difficult, as the original context gets lost on screen. Also these noisy messages will confuse some users, as I have seen many bug reporters posted the noisy message into bugzilla, instead of the real panic call stack and context. Adding a flag "suppress_printk" which gets set in panic() to avoid those noisy messages, without changing current kernel behavior that both panic blinking and sysrq magic key can work as is, suggested by Petr Mladek. To verify this, make sure kernel is not configured to reboot on panic and in console # echo c > /proc/sysrq-trigger to see if console only prints out the panic call stack. Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.comSigned-off-by: NFeng Tang <feng.tang@intel.com> Suggested-by: NPetr Mladek <pmladek@suse.com> Reviewed-by: NPetr Mladek <pmladek@suse.com> Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Hackmann 提交于
LLVM uses profiling data that's deliberately similar to GCC, but has a very different way of exporting that data. LLVM calls llvm_gcov_init() once per module, and provides a couple of callbacks that we can use to ask for more data. We care about the "writeout" callback, which in turn calls back into compiler-rt/this module to dump all the gathered coverage data to disk: llvm_gcda_start_file() llvm_gcda_emit_function() llvm_gcda_emit_arcs() llvm_gcda_emit_function() llvm_gcda_emit_arcs() [... repeats for each function ...] llvm_gcda_summary_info() llvm_gcda_end_file() This design is much more stateless and unstructured than gcc's, and is intended to run at process exit. This forces us to keep some local state about which module we're dealing with at the moment. On the other hand, it also means we don't depend as much on how LLVM represents profiling data internally. See LLVM's lib/Transforms/Instrumentation/GCOVProfiling.cpp for more details on how this works, particularly GCOVProfiler::emitProfileArcs(), GCOVProfiler::insertCounterWriteout(), and GCOVProfiler::insertFlush(). [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20190417225328.208129-1-trong@android.comSigned-off-by: NGreg Hackmann <ghackmann@android.com> Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NTri Vo <trong@android.com> Co-developed-by: NNick Desaulniers <ndesaulniers@google.com> Co-developed-by: NTri Vo <trong@android.com> Tested-by: NTrilok Soni <tsoni@quicinc.com> Tested-by: NPrasad Sodagudi <psodagud@quicinc.com> Tested-by: NTri Vo <trong@android.com> Tested-by: NDaniel Mentz <danielmentz@google.com> Tested-by: NPetri Gynther <pgynther@google.com> Reviewed-by: NPeter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tri Vo 提交于
Document some things of note to gcov users: 1. GCC gcov and Clang llvm-cov tools are not compatible. 2. The use of GCC vs Clang is transparent at build-time. Also adjust the documentation to account for the removal of config symbol CONFIG_GCOV_FORMAT_AUTODETECT by commit 6a61b70b ("gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT"). Link: http://lkml.kernel.org/r/20190318025411.98014-4-trong@android.comSigned-off-by: NTri Vo <trong@android.com> Reviewed-by: NPeter Oberparleiter <oberpar@linux.ibm.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Greg Hackmann <ghackmann@android.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Petri Gynther <pgynther@google.com> Cc: Prasad Sodagudi <psodagud@quicinc.com> Cc: Trilok Soni <tsoni@quicinc.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Hackmann 提交于
Patch series "gcov: add Clang support", v4. This patch (of 3): base.c contains a few callbacks specific to GCC's gcov implementation. Move these into their own module in preparation for Clang support. Link: http://lkml.kernel.org/r/20190318025411.98014-2-trong@android.comSigned-off-by: NGreg Hackmann <ghackmann@android.com> Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NTri Vo <trong@android.com> Tested-by: NTrilok Soni <tsoni@quicinc.com> Tested-by: NPrasad Sodagudi <psodagud@quicinc.com> Tested-by: NTri Vo <trong@android.com> Reviewed-by: NPeter Oberparleiter <oberpar@linux.ibm.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Petri Gynther <pgynther@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 YueHaibing 提交于
Fix sparse warning: fs/eventfd.c:26:1: warning: symbol 'eventfd_ida' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20190413142348.34716-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masatake YAMATO 提交于
Finding endpoints of an IPC channel is one of essential task to understand how a user program works. Procfs and netlink socket provide enough hints to find endpoints for IPC channels like pipes, unix sockets, and pseudo terminals. However, there is no simple way to find endpoints for an eventfd file from userland. An inode number doesn't hint. Unlike pipe, all eventfd files share the same inode object. To provide the way to find endpoints of an eventfd file, this patch adds "eventfd-id" field to /proc/PID/fdinfo of eventfd as identifier. Integers managed by an IDA are used as ids. A tool like lsof can utilize the information to print endpoints. Link: http://lkml.kernel.org/r/20190327181823.20222-1-yamato@redhat.comSigned-off-by: NMasatake YAMATO <yamato@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Timmy Li 提交于
Hash functions are not needed since idr is used now. Let's remove hash header file for cleanup. Link: http://lkml.kernel.org/r/20190430053319.95913-1-scuttimmy@gmail.comSigned-off-by: NTimmy Li <scuttimmy@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
Today, proc_do_large_bitmap() truncates a large write input buffer to PAGE_SIZE - 1, which may result in misparsed numbers at the (truncated) end of the buffer. Further, it fails to notify the caller that the buffer was truncated, so it doesn't get called iteratively to finish the entire input buffer. Tell the caller if there's more work to do by adding the skipped amount back to left/*lenp before returning. To fix the misparsing, reset the position if we have completely consumed a truncated buffer (or if just one char is left, which may be a "-" in a range), and ask the caller to come back for more. Link: http://lkml.kernel.org/r/20190320222831.8243-7-mcgrof@kernel.orgSigned-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Acked-by: NKees Cook <keescook@chromium.org> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
The kernel has only two users of proc_do_large_bitmap(), the kernel CPU watchdog, and the ip_local_reserved_ports. Refer to watchdog_cpumask and ip_local_reserved_ports in Documentation for further details on these. When you input a large buffer into these, when it is larger than PAGE_SIZE- 1, the input data gets misparsed, and the user get incorrectly informed that the desired input value was set. This commit implements a test which mimics and exploits that use case, it uses a bitmap size, as in the watchdog case. The bitmap is used to test the bitmap proc handler, proc_do_large_bitmap(). The next commit fixes this issue. [akpm@linux-foundation.org: move proc_do_large_bitmap() export to EOF] [mcgrof@kernel.org: use new target description for backward compatibility] [mcgrof@kernel.org: augment test number to 50, ran into issues with bash string comparisons when testing up to 50 cases.] [mcgrof@kernel.org: introduce and use verify_diff_proc_file() to use diff] [mcgrof@kernel.org: use mktemp for tmp file] [mcgrof@kernel.org: merge shell test and C code] [mcgrof@kernel.org: commit log love] [mcgrof@kernel.org: export proc_do_large_bitmap() to allow for the test [mcgrof@kernel.org: check for the return value when writing to the proc file] Link: http://lkml.kernel.org/r/20190320222831.8243-6-mcgrof@kernel.orgSigned-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis Chamberlain 提交于
On old kernels older new test knobs implemented on the test_sysctl module may not be available. This is expected, and the selftests test scripts should be able to run without failures on older kernels. Generalize a solution so that we test for each required test target file for each test by requiring each test description to annotate their respective test target file. If the target file does not exist, we skip the test gracefully. Link: http://lkml.kernel.org/r/20190320222831.8243-5-mcgrof@kernel.orgSigned-off-by: NLuis Chamberlain <mcgrof@kernel.org> Acked-by: NKees Cook <keescook@chromium.org> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis Chamberlain 提交于
When verify_diff_w() is used we care about the result, not the verbose output, and although we use -q, that still gives us a chatty message about if the files differ or not. Since verify_diff_w() uses stdinput the chatty message says whether or not "-" matches the target file, and this just seems rather odd. Better to just ignore that messsage all together, what we really care about i sthe results, the return value and we check for that. Link: http://lkml.kernel.org/r/20190320222831.8243-4-mcgrof@kernel.orgSigned-off-by: NLuis Chamberlain <mcgrof@kernel.org> Acked-by: NKees Cook <keescook@chromium.org> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis Chamberlain 提交于
Currently the test script checks for the existence of the sysctl test module's directory path prior to loading it. We must first try to load the module prior to checking for that path. This fixes the order for the load / test. Link: http://lkml.kernel.org/r/20190320222831.8243-3-mcgrof@kernel.orgSigned-off-by: NLuis Chamberlain <mcgrof@kernel.org> Acked-by: NKees Cook <keescook@chromium.org> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luis Chamberlain 提交于
Patch series "sysctl: add pending proc_do_large_bitmap fix". Eric sent a fix out for proc_do_large_bitmap() last month for when using a large input buffer. After patch review a test case for the issue was built and submitted. I noticed there were a few issues with the tests, but instead of just asking Eric to address them I've taken care of them and ammended the commit where necessary. There's a few issues he reported which I also address and fix in this series. Since we *do* expect users of these scripts to also use them on older kernels, I've also addressed not breaking calling the script for them, and gives us an easy way to easily extend our tests cases for future kernels as well. Before anyone considers these for stable as minor fixes, I'd recommend we also address the discrepancy on the read side of things: modify the test script to use diff against the target file instead of using the temp file. This patch (of 6): We already call test_reqs(), no need to call it twice. Link: http://lkml.kernel.org/r/20190320222831.8243-2-mcgrof@kernel.orgSigned-off-by: NLuis Chamberlain <mcgrof@kernel.org> Acked-by: NKees Cook <keescook@chromium.org> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian Brauner 提交于
Currently when userspace gives us a values that overflow e.g. file-max and other callers of __do_proc_doulongvec_minmax() we simply ignore the new value and leave the current value untouched. This can be problematic as it gives the illusion that the limit has indeed be bumped when in fact it failed. This commit makes sure to return EINVAL when an overflow is detected. Please note that this is a userspace facing change. Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.ioSigned-off-by: NChristian Brauner <christian@brauner.io> Acked-by: NLuis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Shevchenko 提交于
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Link: http://lkml.kernel.org/r/20190304094037.57756-1-andriy.shevchenko@linux.intel.comSigned-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NKees Cook <keescook@chromium.org> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kangjie Lu 提交于
In case create_workqueue fails, the fix releases resources and returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by: NKangjie Lu <kjlu@umn.edu> Acked-by: NAlexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yury Norov 提交于
cpumask_parse() finds first occurrence of either or strchr() and strlen(). We can do it better with a single call of strchrnul(). [akpm@linux-foundation.org: remove unneeded cast] Link: http://lkml.kernel.org/r/20190409204208.12190-1-ynorov@marvell.comSigned-off-by: NYury Norov <ynorov@marvell.com> Acked-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Test that trivially recursing script onto itself doesn't work. Note: this is different test from ELOOP tests in execveat.c Those test that execveat(2) doesn't follow symlinks when told to do so. Link: http://lkml.kernel.org/r/20190423192720.GA21433@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
struct linux_binprm::buf is the first field and it is exactly 128 bytes in size. It means that on x86_64 all accesses to other fields will go though [r64 + disp32] addressing mode which is 3 bytes bloatier than [r64 + disp8] addressing mode. Given that accesses to other fields outnumber accesses to ->buf, move it down. Space savings (x86_64 defconfig): more on distro configs because LSMs actively dereference "bprm" but do not care about first 128 bytes of the executable itself. add/remove: 0/0 grow/shrink: 0/24 up/down: 0/-492 (-492) Function old new delta selinux_bprm_committing_creds 552 549 -3 finalize_exec 94 91 -3 __audit_log_bprm_fcaps 283 280 -3 __audit_bprm 39 36 -3 perf_trace_sched_process_exec 347 341 -6 install_exec_creds 105 99 -6 cap_bprm_set_creds.cold 60 54 -6 would_dump 137 128 -9 load_script 637 628 -9 bprm_change_interp 61 52 -9 trace_event_raw_event_sched_process_exec 260 250 -10 search_binary_handler 255 240 -15 remove_arg_zero 295 277 -18 free_bprm 119 101 -18 prepare_binprm 379 360 -19 setup_new_exec 336 315 -21 flush_old_exec 1638 1617 -21 copy_strings.isra 746 724 -22 setup_arg_pages 559 530 -29 load_misc_binary 1151 1118 -33 selinux_bprm_set_creds 792 753 -39 load_elf_binary 11111 11072 -39 cap_bprm_set_creds 1496 1454 -42 __do_execve_file.isra 2395 2286 -109 Link: http://lkml.kernel.org/r/20190421165025.GA26843@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
->recursion_depth is changed only by current, therefore decrementing can be done without taking any locks. Link: http://lkml.kernel.org/r/20190417213150.GA26474@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mathieu Malaterre 提交于
There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warning (W=1). This commit remove the following warning: kernel/signal.c:795:13: warning: this statement may fall through [-Wimplicit-fallthrough=] Link: http://lkml.kernel.org/r/20190114203505.17875-1-malat@debian.orgSigned-off-by: NMathieu Malaterre <malat@debian.org> Acked-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hou Tao 提交于
fsync() needs to make sure the data & meta-data of file are persistent after the return of fsync(), even when a power-failure occurs later. In the case of fat-fs, the FAT belongs to the meta-data of file, so we need to issue a flush after the writeback of FAT instead before. Also bail out early when any stage of fsync fails. Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.comSigned-off-by: NHou Tao <houtao1@huawei.com> Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-