Renames and truncates are both common ways to replace old data with new
data.  The filesystem can make an effort to make sure the new data is
on disk before actually replacing the old data.

This is especially important for rename, which many application use as
though it were atomic for both the data and the metadata involved.  The
current btrfs code will happily replace a file that is fully on disk
with one that was just created and still has pending IO.

If we crash after transaction commit but before the IO is done, we'll end
up replacing a good file with a zero length file.  The solution used
here is to create a list of inodes that need special ordering and force
them to disk before the commit is done.  This is similar to the
ext3 style data=ordering, except it is only done on selected files.

Btrfs is able to get away with this because it does not wait on commits
very often, even for fsync (which use a sub-commit).

For renames, we order the file when it wasn't already
on disk and when it is replacing an existing file.  Larger files
are sent to filemap_flush right away (before the transaction handle is
opened).

For truncates, we order if the file goes from non-zero size down to
zero size.  This is a little different, because at the time of the
truncate the file has no dirty bytes to order.  But, we flag the inode
so that it is added to the ordered list on close (via release method).  We
also immediately add it to the ordered list of the current transaction
so that we can try to flush down any writes the application sneaks in
before commit.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The tree logging code allows individual files or directories to be logged
without including operations on other files and directories in the FS.
It tries to commit the minimal set of changes to disk in order to
fsync the single file or directory that was sent to fsync or O_SYNC.

The tree logging code was allowing files and directories to be unlinked
if they were part of a rename operation where only one directory
in the rename was in the fsync log.  This patch adds a few new rules
to the tree logging.

1) on rename or unlink, if the inode being unlinked isn't in the fsync
log, we must force a full commit before doing an fsync of the directory
where the unlink was done.  The commit isn't done during the unlink,
but it is forced the next time we try to log the parent directory.

Solution: record transid of last unlink/rename per directory when the
directory wasn't already logged.  For renames this is only done when
renaming to a different directory.

mkdir foo/some_dir
normal commit
rename foo/some_dir foo2/some_dir
mkdir foo/some_dir
fsync foo/some_dir/some_file

The fsync above will unlink the original some_dir without recording
it in its new location (foo2).  After a crash, some_dir will be gone
unless the fsync of some_file forces a full commit

2) we must log any new names for any file or dir that is in the fsync
log.  This way we make sure not to lose files that are unlinked during
the same transaction.

2a) we must log any new names for any file or dir during rename
when the directory they are being removed from was logged.

2a is actually the more important variant.  Without the extra logging
a crash might unlink the old name without recreating the new one

3) after a crash, we must go through any directories with a link count
of zero and redo the rm -rf

mkdir f1/foo
normal commit
rm -rf f1/foo
fsync(f1)

The directory f1 was fully removed from the FS, but fsync was never
called on f1, only its parent dir.  After a crash the rm -rf must
be replayed.  This must be able to recurse down the entire
directory tree.  The inode link count fixup code takes care of the
ugly details.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_mark_buffer dirty would set dirty bits in the extent_io tree
for the buffers it was dirtying.  This may require a kmalloc and it
was not atomic.  So, anyone who called btrfs_mark_buffer_dirty had to
set any btree locks they were holding to blocking first.

This commit changes dirty tracking for extent buffers to just use a flag
in the extent buffer.  Now that we have one and only one extent buffer
per page, this can be safely done without losing dirty bits along the way.

This also introduces a path->leave_spinning flag that callers of
btrfs_search_slot can use to indicate they will properly deal with a
path returned where all the locks are spinning instead of blocking.

Many of the btree search callers now expect spinning paths,
resulting in better btree concurrency overall.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent allocation tree maintains a reference count and full
back reference information for every extent allocated in the
filesystem.  For subvolume and snapshot trees, every time
a block goes through COW, the new copy of the block adds a reference
on every block it points to.

If a btree node points to 150 leaves, then the COW code needs to go
and add backrefs on 150 different extents, which might be spread all
over the extent allocation tree.

These updates currently happen during btrfs_cow_block, and most COWs
happen during btrfs_search_slot.  btrfs_search_slot has locks held
on both the parent and the node we are COWing, and so we really want
to avoid IO during the COW if we can.

This commit adds an rbtree of pending reference count updates and extent
allocations.  The tree is ordered by byte number of the extent and byte number
of the parent for the back reference.  The tree allows us to:

1) Modify back references in something close to disk order, reducing seeks
2) Significantly reduce the number of modifications made as block pointers
are balanced around
3) Do all of the extent insertion and back reference modifications outside
of the performance critical btrfs_search_slot code.

#3 has the added benefit of greatly reducing the btrfs stack footprint.
The extent allocation tree modifications are done without the deep
(and somewhat recursive) call chains used in the past.

These delayed back reference updates must be done before the transaction
commits, and so the rbtree is tied to the transaction.  Throttling is
implemented to help keep the queue of backrefs at a reasonable size.

Since there was a similar mechanism in place for the extent tree
extents, that is removed and replaced by the delayed reference tree.

Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is a step in the direction of better -ENOSPC handling.  Instead of
checking the global bytes counter we check the space_info bytes counters to
make sure we have enough space.

If we don't we go ahead and try to allocate a new chunk, and then if that fails
we return -ENOSPC.  This patch adds two counters to btrfs_space_info,
bytes_delalloc and bytes_may_use.

bytes_delalloc account for extents we've actually setup for delalloc and will
be allocated at some point down the line. 

bytes_may_use is to keep track of how many bytes we may use for delalloc at
some point.  When we actually set the extent_bit for the delalloc bytes we
subtract the reserved bytes from the bytes_may_use counter.  This keeps us from
not actually being able to allocate space for any delalloc bytes.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

fsync can be called by NFS with a null file pointer, and btrfs was
oopsing in this case.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

To improve performance, btrfs_sync_log merges tree log sync
requests. But it wrongly merges sync requests for different
tree logs. If multiple tree logs are synced at the same time,
only one of them actually gets synced.

This patch has following changes to fix the bug:

Move most tree log related fields in btrfs_fs_info to
btrfs_root. This allows merging sync requests separately
for each tree log.

Don't insert root item into the log root tree immediately
after log tree is allocated. Root item for log tree is
inserted when log tree get synced for the first time. This
allows syncing the log root tree without first syncing all
log trees.

At tree-log sync, btrfs_sync_log first sync the log tree;
then updates corresponding root item in the log root tree;
sync the log root tree; then update the super block.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Removed unused #include <version.h>'s in btrfs
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_drop_extents doesn't change file extent's ram_bytes
in the case of booked extent. To be consistent, we should
also not change ram_bytes when truncating existing extent.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

There were many, most are fixed now.  struct-funcs.c generates some warnings
but these are bogus.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Checksums on data can be disabled by mount option, so it's
possible some data extents don't have checksums or have
invalid checksums. This causes trouble for data relocation.
This patch contains following things to make data relocation
work.

1) make nodatasum/nodatacow mount option only affects new
files. Checksums and COW on data are only controlled by the
inode flags.

2) check the existence of checksum in the nodatacow checker.
If checksums exist, force COW the data extent. This ensure that
checksum for a given block is either valid or does not exist.

3) update data relocation code to properly handle the case
of checksum missing.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

The fsync logging code makes sure to onl copy the relevant checksum for each
extent based on the file extent pointers it finds.

But for compressed extents, it needs to copy the checksum for the
entire extent.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This adds a sequence number to the btrfs inode that is increased on
every update.  NFS will be able to use that to detect when an inode has
changed, without relying on inaccurate time fields.

While we're here, this also:

Puts reserved space into the super block and inode

Adds a log root transid to the super so we can pick the newest super
based on the fsync log as well as the main transaction ID.  For now
the log root transid is always zero, but that'll get fixed.

Adds a starting offset to the dev_item.  This will let us do better
alignment calculations if we know the start of a partition on the disk.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

When extent needs to be split, btrfs_mark_extent_written truncates the extent
first, then inserts a new extent and increases the reference count.

The race happens if someone else deletes the old extent before the new extent
is inserted. The fix here is increase the reference count in advance. This race
is similar to the race in btrfs_drop_extents that was recently fixed.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

btrfs_drop_extents will drop paths and search again when it needs to
force COW of higher nodes.  It was using the key it found during the last
search as the offset for the next search.

But, this wasn't always correct.  The key could be from before our desired
range, and because we're dropping the path, it is possible for file's items
to change while we do the search again.

The fix here is to make sure we don't search for something smaller than
the offset btrfs_drop_extents was called with.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This makes sure the orig_start field in struct extent_map gets set
everywhere the extent_map structs are created or modified.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The decompress code doesn't take the logical offset in extent
pointer into account. If the logical offset isn't zero, data
will be decompressed into wrong pages.

The solution used here is to record the starting offset of the extent
in the file separately from the logical start of the extent_map struct.
This allows us to avoid problems inserting overlapping extents.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

When reading compressed extents, try to put pages into the page cache
for any pages covered by the compressed extent that readpages didn't already
preload.

Add an async work queue to handle transformations at delayed allocation processing
time.  Right now this is just compression.  The workflow is:

1) Find offsets in the file marked for delayed allocation
2) Lock the pages
3) Lock the state bits
4) Call the async delalloc code

The async delalloc code clears the state lock bits and delalloc bits.  It is
important this happens before the range goes into the work queue because
otherwise it might deadlock with other work queue items that try to lock
those extent bits.

The file pages are compressed, and if the compression doesn't work the
pages are written back directly.

An ordered work queue is used to make sure the inodes are written in the same
order that pdflush or writepages sent them down.

This changes extent_write_cache_pages to let the writepage function
update the wbc nr_written count.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Make sure we keep page->mapping NULL on the pages we're getting
via alloc_page.  It gets set so a few of the callbacks can do the right
thing, but in general these pages don't have a mapping.

Don't try to truncate compressed inline items in btrfs_drop_extents.
The whole compressed item must be preserved.

Don't try to create multipage inline compressed items.  When we try to
overwrite just the first page of the file, we would have to read in and recow
all the pages after it in the same compressed inline items.  For now, only
create single page inline items.

Make sure we lock pages in the correct order during delalloc.  The
search into the state tree for delalloc bytes can return bytes before
the page we already have locked.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch updates btrfs-progs for fallocate support.

fallocate is a little different in Btrfs because we need to tell the
COW system that a given preallocated extent doesn't need to be
cow'd as long as there are no snapshots of it.  This leverages the
-o nodatacow checks.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

When dropping middle part of an extent, btrfs_drop_extents truncates
the extent at first, then inserts a bookend extent.

Since truncation and insertion can't be done atomically, there is a small
period that the bookend extent isn't in the tree. This causes problem for
functions that search the tree for file extent item. The way to fix this is
lock the range of the bookend extent before truncation.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch splits the hole insertion code out of btrfs_setattr
into btrfs_cont_expand and updates btrfs_get_extent to properly
handle the case that file extent items are not continuous.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This is a large change for adding compression on reading and writing,
both for inline and regular extents.  It does some fairly large
surgery to the writeback paths.

Compression is off by default and enabled by mount -o compress.  Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.

If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.

* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler.  This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.

* Inline extents are inserted at delalloc time now.  This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.

* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.

From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field.  Neither the encryption or the
'other' field are currently used.

In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k.  This is a
software only limit, the disk format supports u64 sized compressed extents.

In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k.  This is a software only limit
and will be subject to tuning later.

Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data.  This way additional encodings can be
layered on without having to figure out which encoding to checksum.

Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread.  This makes it tricky to
spread the compression load across all the cpus on the box.  We'll have to
look at parallel pdflush walks of dirty inodes at a later time.

Decompression is hooked into readpages and it does spread across CPUs nicely.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The offset field in struct btrfs_extent_ref records the position
inside file that file extent is referenced by. In the new back
reference system, tree leaves holding references to file extent
are recorded explicitly. We can scan these tree leaves very quickly, so the
offset field is not required.

This patch also makes the back reference system check the objectid
when extents are in deleting.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This patch makes btrfs count space allocated to file in bytes instead
of 512 byte sectors.

Everything else in btrfs uses a byte count instead of sector sizes or
blocks sizes, so this fits better.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This reworks the btrfs O_DIRECT write code a bit.  It had always fallen
back to buffered IO and done an invalidate, but needed to be updated
for the data=ordered code.  The invalidate wasn't actually removing pages
because they were still inside an ordered extent.

This also combines the O_DIRECT/O_SYNC paths where possible, and kicks
off IO in the main btrfs_file_write loop to keep the pipe down the the
disk full as we process long writes.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This improves the comments at the top of many functions.  It didn't
dive into the guts of functions because I was trying to
avoid merging problems with the new allocator and back reference work.

extent-tree.c and volumes.c were both skipped, and there is definitely
more work todo in cleaning and commenting the code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

* Add an EXTENT_BOUNDARY state bit to keep the writepage code
from merging data extents that are in the process of being
relocated.  This allows us to do accounting for them properly.

* The balancing code relocates data extents indepdent of the underlying
inode.  The extent_map code was modified to properly account for
things moving around (invalidating extent_map caches in the inode).

* Don't take the drop_mutex in the create_subvol ioctl.  It isn't
required.

* Fix walking of the ordered extent list to avoid races with sys_unlink

* Change the lock ordering rules.  Transaction start goes outside
the drop_mutex.  This allows btrfs_commit_transaction to directly
drop the relocation trees.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs had compatibility code for kernels back to 2.6.18.  These have
been removed, and will be maintained in a separate backport
git tree from now on.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes the back reference system to explicit record the
location of parent node for all types of extents. The location of
parent node is placed into the offset field of backref key. Every
time a tree block is balanced, the back references for the affected
lower level extents are updated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Drop i_mutex during the commit

Don't bother doing the fsync at all unless the dir is marked as dirtied
and needing fsync in this transaction.  For directories, this means
that someone has unlinked a file from the dir without fsyncing the
file.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

File syncs and directory syncs are optimized by copying their
items into a special (copy-on-write) log tree.  There is one log tree per
subvolume and the btrfs super block points to a tree of log tree roots.

After a crash, items are copied out of the log tree and back into the
subvolume.  See tree-log.c for all the details.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

While dropping snapshots, walk_down_tree does most of the work of checking
reference counts and limiting tree traversal to just the blocks that
we are freeing.

It dropped and held the allocation mutex in strange and confusing ways,
this commit changes it to only hold the mutex while actually freeing a block.

The rest of the checks around reference counts should be safe without the lock
because we only allow one process in btrfs_drop_snapshot at a time.  Other
processes dropping reference counts should not drop it to 1 because
their tree roots already have an extra ref on the block.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This avoids waiting for transactions with pages locked by breaking out
the code to wait for the current transaction to close into a function
called by btrfs_throttle.

It also lowers the limits for where we start throttling.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Add a couple of #if's to follow API changes.
Signed-off-by: NSven Wegener <sven.wegener@stealer.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>