- 30 8月, 2018 6 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'riscv-for-linus-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "RISC-V Fixes and Cleanups for 4.19-rc2 This contains a handful of patches that filtered their way in during the merge window but just didn't make the deadline. It includes: - Additional documentation in the riscv,cpu-intc device tree binding that resulted from some feedback I missed in the original patch set. - A build fix that provides the definition of tlb_flush() before including tlb.h, which fixes a RISC-V build regression introduced during this merge window. - A cosmetic cleanup to sys_riscv_flush_icache()" * tag 'riscv-for-linus-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Use a less ugly workaround for unused variable warnings riscv: tlb: Provide definition of tlb_flush() before including tlb.h dt-bindings: riscv,cpu-intc: Cleanups from a missed review
-
由 Ard Biesheuvel 提交于
The newly added code that emits ksymtab entries as pairs of 32-bit relative references interacts poorly with the way powerpc lays out its address space: when a module exports a per-CPU variable, the primary module region covering the ksymtab entry -and thus the 32-bit relative reference- is too far away from the actual per-CPU variable's base address (to which the per-CPU offsets are applied to obtain the respective address of each CPU's copy), resulting in corruption when the module loader attempts to resolve symbol references of modules that are loaded on top and link to the exported per-CPU symbol. So let's disable this feature on powerpc. Even though it implements CONFIG_RELOCATABLE, it does not implement CONFIG_RANDOMIZE_BASE and so KASLR kernels (which are the main target of the feature) do not exist on powerpc anyway. Reported-by: NAndreas Schwab <schwab@linux-m68k.org> Suggested-by: NNicholas Piggin <nicholas.piggin@gmail.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix potential Spectre v1 in nct6775 - Add error checking to adt7475 driver - Fix reading shunt resistor value in ina2xx driver * tag 'hwmon-for-linus-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6775) Fix potential Spectre v1 hwmon: (adt7475) Make adt7475_read_word() return errors hwmon: (adt7475) Potential error pointer dereferences hwmon: (ina2xx) fix sysfs shunt resistor read access
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull misc fs fixes from Jan Kara: - make UDF to properly mount media created by Win7 - make isofs to properly refuse devices with large physical block size - fix a Spectre gadget in quotactl(2) - fix a warning in fsnotify code hit by syzkaller * tag 'for_v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix mounting of Win7 created UDF filesystems udf: Remove dead code from udf_find_fileset() fs/quota: Fix spectre gadget in do_quotactl fs/quota: Replace XQM_MAXQUOTAS usage with MAXQUOTAS isofs: reject hardware sector size > 2048 bytes fsnotify: fix false positive warning on inode delete
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2由 Linus Torvalds 提交于
Pull nios2 fix from Ley Foon Tan: "remove duplicate DEBUG_STACK_USAGE symbol defintions" * tag 'nios2-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: kconfig: remove duplicate DEBUG_STACK_USAGE symbol defintions
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - Check for the right CPU feature bit in sm4-ce on arm64. - Fix scatterwalk WARN_ON in aes-gcm-ce on arm64. - Fix unaligned fault in aesni on x86. - Fix potential NULL pointer dereference on exit in chtls. - Fix DMA mapping direction for RSA in caam. - Fix error path return value for xts setkey in caam. - Fix address endianness when DMA unmapping in caam. - Fix sleep-in-atomic in vmx. - Fix command corruption when queue is full in cavium/nitrox. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium/nitrox - fix for command corruption in queue full case with backlog submissions. crypto: vmx - Fix sleep-in-atomic bugs crypto: arm64/aes-gcm-ce - fix scatterwalk API violation crypto: aesni - Use unaligned loads from gcm_context_data crypto: chtls - fix null dereference chtls_free_uld() crypto: arm64/sm4-ce - check for the right CPU feature bit crypto: caam - fix DMA mapping direction for RSA forms 2 & 3 crypto: caam/qi - fix error path in xts setkey crypto: caam/jr - fix descriptor DMA unmapping
-
- 29 8月, 2018 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal由 Linus Torvalds 提交于
Pull thermal fixes from Eduardo Valentin: "Minor fixes to OF thermal, qoriq, and rcar drivers" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: of-thermal: disable passive polling when thermal zone is disabled thermal: rcar_gen3_thermal: convert to SPDX identifiers thermal: rcar_thermal: convert to SPDX identifiers thermal: qoriq: Switch to SPDX identifier thermal: qoriq: Simplify the 'site' variable assignment thermal: qoriq: Use devm_thermal_zone_of_sensor_register()
-
由 Palmer Dabbelt 提交于
Thanks to Christoph Hellwig for pointing out a cleaner way to do this, as my approach was quite ugly. CC: Christoph Hellwig <hch@lst.de> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
由 Will Deacon 提交于
As of commit fd1102f0 ("mm: mmu_notifier fix for tlb_end_vma"), asm-generic/tlb.h now calls tlb_flush() from a static inline function, so we need to make sure that it's declared before #including the asm-generic header in the arch header. Reported-by: NGuenter Roeck <linux@roeck-us.net> Fixes: fd1102f0 ("mm: mmu_notifier fix for tlb_end_vma") Signed-off-by: NWill Deacon <will.deacon@arm.com> [groeck: Use forward declaration instead of moving inline function] Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
由 Palmer Dabbelt 提交于
I managed to miss one of Rob's code reviews on the mailing list <http://lists.infradead.org/pipermail/linux-riscv/2018-August/001139.html>. The patch has already been merged, so I'm submitting a fixup. Sorry! Fixes: b67bc7cb ("dt-bindings: interrupt-controller: RISC-V local interrupt controller") Cc: Rob Herring <robh@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Karsten Merker <merker@debian.org> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
- 28 8月, 2018 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) ICE, E1000, IGB, IXGBE, and I40E bug fixes from the Intel folks. 2) Better fix for AB-BA deadlock in packet scheduler code, from Cong Wang. 3) bpf sockmap fixes (zero sized key handling, etc.) from Daniel Borkmann. 4) Send zero IPID in TCP resets and SYN-RECV state ACKs, to prevent attackers using it as a side-channel. From Eric Dumazet. 5) Memory leak in mediatek bluetooth driver, from Gustavo A. R. Silva. 6) Hook up rt->dst.input of ipv6 anycast routes properly, from Hangbin Liu. 7) hns and hns3 bug fixes from Huazhong Tan. 8) Fix RIF leak in mlxsw driver, from Ido Schimmel. 9) iova range check fix in vhost, from Jason Wang. 10) Fix hang in do_tcp_sendpages() with tls, from John Fastabend. 11) More r8152 chips need to disable RX aggregation, from Kai-Heng Feng. 12) Memory exposure in TCA_U32_SEL handling, from Kees Cook. 13) TCP BBR congestion control fixes from Kevin Yang. 14) hv_netvsc, ignore non-PCI devices, from Stephen Hemminger. 15) qed driver fixes from Tomer Tayar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: sched: Fix memory exposure from short TCA_U32_SEL qed: fix spelling mistake "comparsion" -> "comparison" vhost: correctly check the iova range when waking virtqueue qlge: Fix netdev features configuration. net: macb: do not disable MDIO bus at open/close time Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency" net: macb: Fix regression breaking non-MDIO fixed-link PHYs mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge i40e: fix condition of WARN_ONCE for stat strings i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled ixgbe: fix driver behaviour after issuing VFLR ixgbe: Prevent unsupported configurations with XDP ixgbe: Replace GFP_ATOMIC with GFP_KERNEL igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback() igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init() igb: Use an advanced ctx descriptor for launchtime e1000: ensure to free old tx/rx rings in set_ringparam() e1000: check on netif_running() before calling e1000_up() ixgb: use dma_zalloc_coherent instead of allocator/memset ice: Trivial formatting fixes ...
-
- 27 8月, 2018 15 次提交
-
-
由 Jens Axboe 提交于
The email was botched in one entry, and I also forgot to update the location of the git tree. It'll be under the linux-block umbrella, just with different branches. Reported-by: NBaruch Siach <baruch@tkos.co.il> Fixes: 7634ccd2 ("libata: maintainership update") Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tobias Klauser 提交于
DEBUG_STACK_USAGE is already defined in lib/Kconfig.debug Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Gustavo A. R. Silva 提交于
val can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/hwmon/nct6775.c:2698 store_pwm_weight_temp_sel() warn: potential spectre issue 'data->temp_src' [r] Fix this by sanitizing val before using it to index data->temp_src Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Dan Carpenter 提交于
The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NTokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Dan Carpenter 提交于
The adt7475_update_device() function returns error pointers. The problem is that in show_pwmfreq() we dereference it before the check. And then in pwm_use_point2_pwm_at_crit_show() there isn't a check at all. I don't know if it's required, but it silences a static checker warning and it's doesn't hurt anything to check. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NTokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Lothar Felten 提交于
fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: NLothar Felten <lothar.felten@gmail.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Kees Cook 提交于
Via u32_change(), TCA_U32_SEL has an unspecified type in the netlink policy, so max length isn't enforced, only minimum. This means nkeys (from userspace) was being trusted without checking the actual size of nla_len(), which could lead to a memory over-read, and ultimately an exposure via a call to u32_dump(). Reachability is CAP_NET_ADMIN within a namespace. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NKees Cook <keescook@chromium.org> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer update from Thomas Gleixner: "New defines for the compat time* types so they can be shared between 32bit and 64bit builds. Not used yet, but merging them now allows the actual conversions to be merged through different maintainer trees without dependencies We still have compat interfaces for 32bit on 64bit even with the new 2038 safe timespec/val variants because pointer size is different. And for the old style timespec/val interfaces we need yet another 'compat' interface for both 32bit native and 32bit on 64bit" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: y2038: Provide aliases for compat helpers
-
git://git.infradead.org/users/willy/linux-dax由 Linus Torvalds 提交于
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull gcc plugin fix from Kees Cook: "Lift gcc test into Kconfig. This is for better behavior when the kernel is built with Clang, reported by Stefan Agner" * tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Disable when building under Clang
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Thomas Gleixner: "Kernel: - Improve kallsyms coverage - Add x86 entry trampolines to kcore - Fix ARM SPE handling - Correct PPC event post processing Tools: - Make the build system more robust - Small fixes and enhancements all over the place - Update kernel ABI header copies - Preparatory work for converting libtraceevnt to a shared library - License cleanups" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' tools arch x86: Update tools's copy of cpufeatures.h perf python: Fix pyrf_evlist__read_on_cpu() interface perf mmap: Store real cpu number in 'struct perf_mmap' perf tools: Remove ext from struct kmod_path perf tools: Add gzip_is_compressed function perf tools: Add lzma_is_compressed function perf tools: Add is_compressed callback to compressions array perf tools: Move the temp file processing into decompress_kmodule perf tools: Use compression id in decompress_kmodule() perf tools: Store compression id into struct dso perf tools: Add compression id into 'struct kmod_path' perf tools: Make is_supported_compression() static perf tools: Make decompress_to_file() function static perf tools: Get rid of dso__needs_decompress() call in __open_dso() perf tools: Get rid of dso__needs_decompress() call in symbol__disassemble() perf tools: Get rid of dso__needs_decompress() call in read_object_code() tools lib traceevent: Change to SPDX License format perf llvm: Allow passing options to llc in addition to clang perf parser: Improve error message for PMU address filters ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - Correct the L1TF fallout on 32bit and the off by one in the 'too much RAM for protection' calculation. - Add a helpful kernel message for the 'too much RAM' case - Unbreak the VDSO in case that the compiler desides to use indirect jumps/calls and emits retpolines which cannot be resolved because the kernel uses its own thunks, which does not work for the VDSO. Make it use the builtin thunks. - Re-export start_thread() which was unexported when the 32/64bit implementation was unified. start_thread() is required by modular binfmt handlers. - Trivial cleanups * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/l1tf: Suggest what to do on systems with too much RAM x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM x86/kvm/vmx: Remove duplicate l1d flush definitions x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit x86/process: Re-export start_thread() x86/mce: Add notifier_block forward declaration x86/vdso: Fix vDSO build if a retpoline is emitted
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq update from Thomas Gleixner: "A small set of updats/fixes for the irq subsystem: - Allow GICv3 interrupts to be configured as wake-up sources to enable wakeup from suspend - Make the error handling of the STM32 irqchip init function work - A set of small cleanups and improvements" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Allow interrupt to be configured as wake-up sources irqchip/tango: Set irq handler and data in one go dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0 irqchip/stm32: Fix init error handling irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull licking update from Thomas Gleixner: "Mark the switch cases which fall through to the next case with the proper comment so the fallthrough compiler checks can be enabled" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Mark expected switch fall-throughs
-
- 26 8月, 2018 14 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm memory-failure update from Dave Jiang: "As it stands, memory_failure() gets thoroughly confused by dev_pagemap backed mappings. The recovery code has specific enabling for several possible page states and needs new enabling to handle poison in dax mappings. In order to support reliable reverse mapping of user space addresses: 1/ Add new locking in the memory_failure() rmap path to prevent races that would typically be handled by the page lock. 2/ Since dev_pagemap pages are hidden from the page allocator and the "compound page" accounting machinery, add a mechanism to determine the size of the mapping that encompasses a given poisoned pfn. 3/ Given pmem errors can be repaired, change the speculatively accessed poison protection, mce_unmap_kpfn(), to be reversible and otherwise allow ongoing access from the kernel. A side effect of this enabling is that MADV_HWPOISON becomes usable for dax mappings, however the primary motivation is to allow the system to survive userspace consumption of hardware-poison via dax. Specifically the current behavior is: mce: Uncorrected hardware memory error in user-access at af34214200 {1}[Hardware Error]: It has been corrected by h/w and requires no further action mce: [Hardware Error]: Machine check events logged {1}[Hardware Error]: event severity: corrected Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users [..] Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed mce: Memory error not recovered <reboot> ...and with these changes: Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000 Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption Memory failure: 0x20cb00: recovery action for dax page: Recovered Given all the cross dependencies I propose taking this through nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax folks" * tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pmem: Restore page attributes when clearing errors x86/memory_failure: Introduce {set, clear}_mce_nospec() x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses mm, memory_failure: Teach memory_failure() about dev_pagemap pages filesystem-dax: Introduce dax_lock_mapping_entry() mm, memory_failure: Collect mapping size in collect_procs() mm, madvise_inject_error: Let memory_failure() optionally take a page reference mm, dev_pagemap: Do not clear ->mapping on final put mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages filesystem-dax: Set page->index device-dax: Set page->index device-dax: Enable page_mapping() device-dax: Convert to vmf_insert_mixed and vm_fault_t
-
由 Linus Torvalds 提交于
Pull libnvdimm updates from Dave Jiang: "Collection of misc libnvdimm patches for 4.19 submission: - Adding support to read locked nvdimm capacity. - Change test code to make DSM failure code injection an override. - Add support for calculate maximum contiguous area for namespace. - Add support for queueing a short ARS when there is on going ARS for nvdimm. - Allow NULL to be passed in to ->direct_access() for kaddr and pfn params. - Improve smart injection support for nvdimm emulation testing. - Fix test code that supports for emulating controller temperature. - Fix hang on error before devm_memremap_pages() - Fix a bug that causes user memory corruption when data returned to user for ars_status. - Maintainer updates for Ross Zwisler emails and adding Jan Kara to fsdax" * tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: fix ars_status output length calculation device-dax: avoid hang on error before devm_memremap_pages() tools/testing/nvdimm: improve emulation of smart injection filesystem-dax: Do not request kaddr and pfn when not required md/dm-writecache: Don't request pointer dummy_addr when not required dax/super: Do not request a pointer kaddr when not required tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access() s390, dcssblk: kaddr and pfn can be NULL to ->direct_access() libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access() acpi/nfit: queue issuing of ars when an uc error notification comes in libnvdimm: Export max available extent libnvdimm: Use max contiguous area for namespace size MAINTAINERS: Add Jan Kara for filesystem DAX MAINTAINERS: update Ross Zwisler's email address tools/testing/nvdimm: Fix support for emulating controller temperature tools/testing/nvdimm: Make DSM failure code injection an override acpi, nfit: Prefer _DSM over _LSR for namespace label reads libnvdimm: Introduce locked DIMM capacity support
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in DP_ERR error message Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
We don't wakeup the virtqueue if the first byte of pending iova range is the last byte of the range we just got updated. This will lead a virtqueue to wait for IOTLB updating forever. Fixing by correct the check and wake up the virtqueue in this case. Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Reported-by: NPeter Xu <peterx@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Tested-by: NPeter Xu <peterx@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
qlge_fix_features() is not supposed to modify hardware or driver state, rather it is supposed to only fix requested fetures bits. Currently qlge_fix_features() also goes for interface down and up unnecessarily if there is not even any change in features set. This patch changes/fixes following - 1) Move reload of interface or device re-config from qlge_fix_features() to qlge_set_features(). 2) Reload of interface in qlge_set_features() only if relevant feature bit (NETIF_F_HW_VLAN_CTAG_RX) is changed. 3) Get rid of qlge_fix_features() since driver is not really required to fix any features bit. Signed-off-by: NManish <manish.chopra@cavium.com> Reviewed-by: NBenjamin Poirier <bpoirier@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anssi Hannula 提交于
macb_reset_hw() is called from macb_close() and indirectly from macb_open(). macb_reset_hw() zeroes the NCR register, including the MPE (Management Port Enable) bit. This will prevent accessing any other PHYs for other Ethernet MACs on the MDIO bus, which remains registered at macb_reset_hw() time, until macb_init_hw() is called from macb_open() which sets the MPE bit again. I.e. currently the MDIO bus has a short disruption at open time and is disabled at close time until the interface is opened again. Fix that by only touching the RE and TE bits when enabling and disabling RX/TX. v2: Make macb_init_hw() NCR write a single statement. Fixes: 6c36a707 ("macb: Use generic PHY layer") Signed-off-by: NAnssi Hannula <anssi.hannula@bitwise.fi> Reviewed-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Tested-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
This reverts commit bde49753. All legacy clock implementations now implement clk_set_rate() (Some implementations may be dummies, though). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NArnd Bergmann <arnd@arnd.de> Acked-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ahmad Fatoum 提交于
commit 739de9a1 ("net: macb: Reorganize macb_mii bringup") broke initializing macb on the EVB-KSZ9477 eval board. There, of_mdiobus_register was called even for the fixed-link representing the RGMII-link to the switch with the result that the driver attempts to enumerate PHYs on a non-existent MDIO bus: libphy: MACB_mii_bus: probed mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0 [snip] mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31 The "MDIO" bus registration succeeds regardless, having claimed the reset GPIO, and calling of_phy_register_fixed_link later on fails because it tries to claim the same GPIO: macb f0028000.ethernet: broken fixed-link specification Fix this by registering the fixed-link before calling mdiobus_register. Fixes: 739de9a1 ("net: macb: Reorganize macb_mii bringup") Signed-off-by: NAhmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
When a bridge device is removed, the VLANs are flushed from each configured port. This causes the ports to decrement the reference count on the associated FIDs (filtering identifier). If the reference count of a FID is 1 and it has a RIF (router interface), then this RIF is destroyed. However, if no port is member in the VLAN for which a RIF exists, then the RIF will continue to exist after the removal of the bridge. To reproduce: # ip link add name br0 type bridge vlan_filtering 1 # ip link set dev swp1 master br0 # ip link add link br0 name br0.10 type vlan id 10 # ip address add 192.0.2.0/24 dev br0.10 # ip link del dev br0 The RIF associated with br0.10 continues to exist. Fix this by iterating over all the bridge device uppers when it is destroyed and take care of destroying their RIFs. Fixes: 99f44bb3 ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC late updates from Olof Johansson: "A couple of late-merged changes that would be useful to get in this merge window: - Driver support for reset of audio complex on Meson platforms. The audio driver went in this merge window, and these changes have been in -next for a while (just not in our tree). - Power management fixes for IOMMU on Rockchip platforms, getting closer to kexec working on them, including Chromebooks. - Another pass updating "arm,psci" -> "psci" for some properties that have snuck in since last time it was done" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/rockchip: Move irq request past pm_runtime_enable iommu/rockchip: Handle errors returned from PM framework arm64: rockchip: Force CONFIG_PM on Rockchip systems ARM: rockchip: Force CONFIG_PM on Rockchip systems arm64: dts: Fix various entry-method properties to reflect documentation reset: imx7: Fix always writing bits as 0 reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild由 Linus Torvalds 提交于
Pull more Kbuild updates from Masahiro Yamada: - add build_{menu,n,g,x}config targets for compile-testing Kconfig - fix and improve recursive dependency detection in Kconfig - fix parallel building of menuconfig/nconfig - fix syntax error in clang-version.sh - suppress distracting log from syncconfig - remove obsolete "rpm" target - remove VMLINUX_SYMBOL(_STR) macro entirely - fix microblaze build with CONFIG_DYNAMIC_FTRACE - move compiler test for dead code/data elimination to Kconfig - rename well-known LDFLAGS variable to KBUILD_LDFLAGS - misc fixes and cleanups * tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rename LDFLAGS to KBUILD_LDFLAGS kbuild: pass LDFLAGS to recordmcount.pl kbuild: test dead code/data elimination support in Kconfig initramfs: move gen_initramfs_list.sh from scripts/ to usr/ vmlinux.lds.h: remove stale <linux/export.h> include export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci kbuild: make sorting initramfs contents independent of locale kbuild: remove "rpm" target, which is alias of "rpm-pkg" kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt kconfig: suppress "configuration written to .config" for syncconfig kconfig: fix "Can't open ..." in parallel build kbuild: Add a space after `!` to prevent parsing as file pattern scripts: modpost: check memory allocation results kconfig: improve the recursive dependency report kconfig: report recursive dependency involving 'imply' kconfig: error out when seeing recursive dependency kconfig: add build-only configurator targets scripts/dtc: consolidate include path options in Makefile
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A few small fixes for this merge window: - Locking imbalance fix for bcache (Shan Hai) - A few small fixes for wbt. One is a cleanup/prep, one is a fix for an existing issue, and the last two are fixes for changes that went into this merge window (me)" * tag 'for-linus-20180825' of git://git.kernel.dk/linux-block: blk-wbt: don't maintain inflight counts if disabled blk-wbt: fix has-sleeper queueing check blk-wbt: use wq_has_sleeper() for wq active check blk-wbt: move disable check into get_limit() bcache: release dc->writeback_lock properly in bch_writeback_thread()
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBIFS fix from Richard Weinberger: "Remove an empty file from UBIFS source" * tag 'upstream-4.19-rc1-fix' of git://git.infradead.org/linux-ubifs: ubifs: Remove empty file.h
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "Three small SMB3 fixes, one for stable" * tag '4.19-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko to 2.12 cifs: check kmalloc before use cifs: check if SMB2 PDU size has been padded and suppress the warning cifs: create a define for how many iovs we need for an SMB2_open()
-