The Qt Project recommendation is that there should always be a "qmake"
binary and it should never be renamed. If it's necessary to handle
multiple Qt versions, the Qt Project recommends using qtchooser.

Unfortunately, some distros do not follow the recommendation, so we
would need to check qmake-qt4, qmake-qt5, etc. So, instead, let's try
pkg-config.
Signed-off-by: NThiago Macieira <thiago.macieira@intel.com>
Reported-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NMichal Marek <mmarek@suse.com>

The buildsystem will now only search for Qt 4 and Qt 5. Support for Qt 2
and 3 was dropped in the previous commits (Qt 3 was EOL'ed in 2010 or
so...).

For Qt 5, to be future-proof with the future direction notice appearing
in the 5.5 release, C++11 support is automatically enabled.
Signed-off-by: NThiago Macieira <thiago.macieira@intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.com>

Signed-off-by: NBoris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: NThiago Macieira <thiago.macieira@intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.com>

This lets you build a kernel which can support xen dom0
or xen guests on i386, x86-64 and arm64 by just using:

   make xenconfig

You can start from an allnoconfig and then switch to xenconfig.
This also splits out the options which are available currently
to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest
kernel configuration but upon review with the xen team
since we don't have many dom0 options its best to just
combine these two into one.

A few generic notes: we enable both of these:

CONFIG_INET=y
CONFIG_BINFMT_ELF=y

although technically not required given you likely will
end up with a pretty useless system otherwise.

A few architectural differences worth noting:

$ make allnoconfig; make xenconfig > /dev/null ; \
	grep XEN .config > 64-bit-config
$ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \
	grep XEN .config > 32-bit-config
$ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \
	grep XEN .config > arm64-config

Since the options are already split up with a generic config and
architecture specific configs you anything on the x86 configs
are known to only work right now on x86. For instance arm64 doesn't
support MEMORY_HOTPLUG yet as such although we try to enabe it
generically arm64 doesn't have it yet, so we leave the xen
specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config
file to set expecations correctly.

Then on x86 we have differences between i386 and x86-64. The difference
between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as
this is only supported on 64-bit. You also do not get on i386
XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical
reasons to not allow this but I gave up after a few attempts.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NJulien Grall <julien.grall@linaro.org>
Acked-by: NMichal Marek <mmarek@suse.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

We'll be adding options for xen as well.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Some "make help" text lines extend beyond 80 characters. Wrap them at 79
characters.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NDiego Viola <diego.viola@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NDiego Viola <diego.viola@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Use a single rule for targets handled directly by the conf program.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".

This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".

Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Kbuild always runs in $(objtree).  Actually, $(objtree) is always
set to "." by the top-level Makefile.

We can omit "-O $(objtree)" and "$(objtree)/".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Currently, "make tinyconfig" does not work with "-j" option.

  $ make mrproper
  $ make -j8 tinyconfig
    HOSTCC  scripts/basic/fixdep
    HOSTCC  scripts/kconfig/conf.o
    SHIPPED scripts/kconfig/zconf.tab.c
    SHIPPED scripts/kconfig/zconf.lex.c
    SHIPPED scripts/kconfig/zconf.hash.c
    HOSTCC  scripts/kconfig/zconf.tab.o
    HOSTLD  scripts/kconfig/conf
  scripts/kconfig/conf --allnoconfig Kconfig
  #
  # configuration written to .config
  #
  scripts/kconfig/Makefile:122: *** You need an existing .config
  for this target.  Stop.
  make: *** [tinyconfig] Error 2

As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.

We can fix this issue by moving the error check to the shell script.

Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file.  It is reasonable to check its existence in
the shell script.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1.  Add `+' to parent make rule.",
is displayed.

  $ make -s defconfig
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  $ make -j8 kvmconfig
  Using ./.config as base
  Merging ./arch/x86/configs/kvm_guest.config
    [ snip ]
  #
  # merged configuration written to ./.config (needs make)
  #
  make[2]: warning: jobserver unavailable: using -j1.  Add `+' to
  parent make rule.
  scripts/kconfig/conf --oldconfig Kconfig
    [ snip ]
  #
  # configuration written to .config
  #
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Currently, Kconfig descriptions that use multi-byte UTF-8 characters
(such as MTD_NAND_CAFE) will have their menu entries dropped from the
'make nconfig' ncurses menu, and all subsequent entries in the same
window will be omitted. This seems to be due to the ncurses 'menu'
library, which does not traditionally handle UTF-8 >8-bit characters
properly.

The ncursesw library ('w' is for "wide") is written to handle these
UTF-8 characters, and is practically a drop-in replacement at the source
level. Use it by default, if available.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=43067Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Walch <walch.martin@web.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Now mconf, qconf, gconf, nconf are always added to hostprogs-y.
Files added to hostprogs-y are removed by "make clean".
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Now it is harmless to add all host programs to hostprogs-y.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Since commit 5d2acfc7 ("kconfig: make
allnoconfig disable options behind EMBEDDED and EXPERT") in 3.15-rc1,
"make allnoconfig" disables every possible config option.

However, a few configuration options (CC_OPTIMIZE_FOR_SIZE,
OPTIMIZE_INLINING) produce a smaller kernel when turned on, and a few
choices exist (compression, highmem, allocator) for which a non-default
option produces a smaller kernel.

Add a "tinyconfig" option, which starts from allnoconfig and then sets
these options to configure the tiniest possible kernel.  This provides a
better baseline for embedded systems or efforts to reduce kernel size.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

The new mergeconfig helper makes it easier to add other partial
configurations similar to kvmconfig.  Architecture-independent portions
of those partial configurations should go in
kernel/configs/${name}.config, and architecture-dependent portions
should go in arch/${arch}/configs/${name}.config.

Based on a patch by Luis R. Rodriguez <mcgrof@suse.com>.
Originally-Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>

Modified to make the helper name more general than just virtualization,
support architecture-dependent and architecture-independent partial
configurations, move the helper and kvmconfig to
scripts/kconfig/Makefile, and factor out more of the common file path.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

The directory include/config is used only for
silentoldconfig, localmodconfig, localyesconfig.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

When building ncurses with --with-termlib several symbols get moved from
libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one
additionally needs to link with libtinfo.so.

The ncurses pkg-config module will be used to detect the necessary libs for
linking. If not available the old way of directly specifying libs will be
used.
Signed-off-by: NJustin Lecher <jlec@gentoo.org>
[yann.morin.1998@free.fr: fix typo: '-ncurses' --> '-lncurses']
Tested-by: N"Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: N"Yann E. MORIN" <yann.morin.1998@free.fr>

Now that we get the CONFIG_ prefix from the environment, we must
ensure we use the proper prefix in case the user has it set in
the environment.

Simply unexport CONFIG_ to fallback to our hard-coded default.
Signed-off-by: N"Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

As 67d34a6a said, 'oldnoconfig' doesn't
set new symbols to 'n', but instead sets it to their default values.

So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making
people confused, and keep the old name 'oldnoconfig' as an alias,
because people already are dependent on its behavior with the
counter-intuitive name.
Signed-off-by: NAdam Lee <adam8157@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The make target 'oldnoconfig' is a misnomer. It doesn't set new symbols
to 'n', but instead sets it to their default values.

Unfortunately, assuming that it actually did this, broke ktest in some
of its tests. For example, the tests to create a minimum config and even
a config bisect, depends on removing various configs and using
oldnoconfig to get rid of other configs that may have depended on it.

But because some configs that it was trying to disable, were in fact
default enabled, this caused those configs to re-enable and corrupt the
test.

I thought about fixing oldnoconfig, but I'm afraid that people are
already dependent on its current behavior. Instead, I'm just updating
the documentation to state that it sets the new symbols to their default
values and not to 'n'.

Ideally, this would be called, 'olddefconfig' and we have an
'oldnoconfig' that actually disables the new symbols. But it's useless
for me now. If it changed, ktest would need to be consistent between
each version, and that would be to difficult to detect. I'll handle this
issue with ktest with other means.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NMichal Marek <mmarek@suse.cz>

Also add a dependency on .tmp_qtcheck for KC_QT_MOC.
Signed-off-by: NYaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Various schemes exist to allow parallel installations of multiple major
versions of Qt (4.x with the previous 3.x and/or the upcoming 5.x).
QtCore.pc includes a moc_location variable which should be a more reliable
way to find moc.
Signed-off-by: NYaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Make the V=0 output from update-po-config be aligned correctly.
Also remove an outdated comment and add a "GEN" statement.
Signed-off-by: NPeter Foley <pefoley2@verizon.net>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Commit 5c48b108 ("um: take arch/um/sys-x86 to arch/x86/um") broke the
make target update-po-config, as its symlink trick (again) fails.
(Previous breakage was fixed with commit bdc69ca4 ("kconfig: change
update-po-config to reflect new layout of arch/um").)

The new UML layout allows to drop the symlick trick entirely. And if,
one day, another architecture supports UML too, that should now work
without again breaking this make target.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The two targets `localmodconfig' and `localyesconfig' only differs from the
sed(1) ran on the result of `streamline_config.pl' to convert symbols set to
`modules' to `yes'. This conversion can be made directly from the perl script,
and thus avoid duplicating the command to generate the configuration.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

The options introduced are --localmodconfig (default) and --localyesconfig.
They match the Makefile target behavior.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

As the `gconf' frontend is un-maintained, go the easy way by silencing
the "warning: no previous prototype for '<fn>'" warnings.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

This interface is not (and has never been ?) used by any frontend, just get rid
of it.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

Signed-off-by: NPeter Foley <pefoley2@verizon.net>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NPeter Foley <pefoley2@verizon.net>
Signed-off-by: NMichal Marek <mmarek@suse.cz>