- 16 4月, 2008 3 次提交
-
-
由 Vitaliy Gusev 提交于
Returns non-zero if tp->out_of_order_queue was seen non-empty. This allows tcp_try_rmem_schedule() to return early. Signed-off-by: NVitaliy Gusev <vgusev@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Some people are getting this message a lot, and we have traced it to broken access points that much too often send completely empty frames (all bytes zeroed, which they shouldn't do at all.) Since we cannot do anything about such frames in any case except the special case where we're debugging an AP, just remove the message. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Carlos Corbacho 提交于
rfkill_switch_all() is supposed to only switch all the interfaces of a given type, but does not actually do this; instead, it just switches everything currently in the same state. Add the necessary type check in. (This fixes a bug I've been seeing while developing an rfkill laptop driver, with both bluetooth and wireless simultaneously changing state after only pressing either KEY_WLAN or KEY_BLUETOOTH). Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 4月, 2008 2 次提交
-
-
由 Vitaliy Gusev 提交于
tcp_prune_queue() doesn't prune an out-of-order queue at all. Therefore sk_rmem_schedule() can fail but the out-of-order queue isn't pruned . This can lead to tcp deadlock state if the next two conditions are held: 1. There are a sequence hole between last received in order segment and segments enqueued to the out-of-order queue. 2. Size of all segments in the out-of-order queue is more than tcp_mem[2]. Signed-off-by: NVitaliy Gusev <vgusev@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
TC_H_MAJ(parentid) for root classes is the same as for ingress, and if ingress qdisc is created qdisc_lookup() returns its pointer (without ingress NULL is returned). After this all qdisc_lookups give the same, and we get endless loop. (I don't know how this could hide for so long - it should trigger with every leaf class deleted if it's qdisc isn't empty.) After this fix qdisc_lookup() is omitted both for ingress and root parents, but looking for root is only wasting a little time here... Many thanks to Enrico Demarin for finding a test for catching this bug, which probably bothered quite a lot of admins. Reported-by: Enrico Demarin <enrico@superclick.com>, Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2008 8 次提交
-
-
由 Patrick McHardy 提交于
The bridge netfilter code attaches a fake dst_entry with a pointer to a fake net_device structure to skbs it passes up to IPv4 netfilter. This leads to crashes when the skb is passed to __ip_route_output_key when dereferencing the namespace pointer. Since bridging can currently only operate in the init_net namespace, the easiest fix for now is to initialize the nd_net pointer of the fake net_device struct to &init_net. Should fix bugzilla 10323: http://bugzilla.kernel.org/show_bug.cgi?id=10323Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Consider we are putting a clusterip_config entry with the "entries" count == 1, and on the other CPU there's a clusterip_config_find_get in progress: CPU1: CPU2: clusterip_config_entry_put: clusterip_config_find_get: if (atomic_dec_and_test(&c->entries)) { /* true */ read_lock_bh(&clusterip_lock); c = __clusterip_config_find(clusterip); /* found - it's still in list */ ... atomic_inc(&c->entries); read_unlock_bh(&clusterip_lock); write_lock_bh(&clusterip_lock); list_del(&c->list); write_unlock_bh(&clusterip_lock); ... dev_put(c->dev); Oops! We have an entry returned by the clusterip_config_find_get, which is a) not in list b) has a stale dev pointer. The problems will happen when the CPU2 will release the entry - it will remove it from the list for the 2nd time, thus spoiling it, and will put a stale dev pointer. The fix is to make atomic_dec_and_test under the clusterip_lock. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 YOSHIFUJI Hideaki 提交于
As far as I can remember, I was going to disable privacy extensions on all "tunnel" interfaces. Disable it on ip6-ip6 interface as well. Also, just remove ifdefs for SIT for simplicity. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Fixes kernel bugzilla 10437 Based almost entirely upon a patch by Dmitry Butskoy. When deciding what raw sockets to deliver the ICMPv6 to, we should use the addresses in the ICMPv6 quoted IPV6 header, not the top-level one. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Paul Bolle wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=9923 would have been much easier to > track down if eth_validate_addr() would somehow complain aloud if an address > is invalid. Shouldn't it make at least some noise? I guess it should return -EADDRNOTAVAIL similar to eth_mac_addr() when validation fails. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
The kernel-doc comment for skb_segment is clearly wrong. This states what it actually does. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Problem spotted by Andrew Brampton Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2008 7 次提交
-
-
由 Pavel Emelyanov 提交于
All IP addresses that are present in a system are duplicated on struct sctp_sockaddr_entry. They are linked in the global list called sctp_local_addr_list. And this struct unions IPv4 and IPv6 addresses. So, there can be rare case, when a sockaddr_in.sin_addr coincides with the corresponding part of the sockaddr_in6 and the notifier for IPv4 will carry away an IPv6 entry. The fix is to check the family before comparing the addresses. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Fix 3 warnings about discarding const qualifiers: net/sctp/ulpevent.c:862: warning: passing argument 1 of 'sctp_event2skb' discards qualifiers from pointer target type net/sctp/sm_statefuns.c:4393: warning: passing argument 1 of 'SCTP_ASOC' discards qualifiers from pointer target type net/sctp/socket.c:5874: warning: passing argument 1 of 'cmsg_nxthdr' discards qualifiers from pointer target type Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gui Jianfeng 提交于
When receiving an error length INIT-ACK during COOKIE-WAIT, a 0-vtag ABORT will be responsed. This action violates the protocol apparently. This patch achieves the following things. 1 If the INIT-ACK contains all the fixed parameters, use init-tag recorded from INIT-ACK as vtag. 2 If the INIT-ACK doesn't contain all the fixed parameters, just reflect its vtag. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
RFC 4890 has the following text: The HMAC algorithm based on SHA-1 MUST be supported and included in the HMAC-ALGO parameter. As a result, we need to check in sctp_verify_param() that HMAC_SHA1 is present in the list. If not, we should probably treat this as a protocol violation. It should also be a protocol violation if the HMAC parameter is empty. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Deleting of nonroot hnodes mostly doesn't work in u32_delete(): refcnt == 1 is expected, but such hnodes' refcnts are initialized with 0 and charged only with "link" nodes. Now they'll start with 1 like usual. Thanks to Patrick McHardy for an improving suggestion. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
dev_queue_xmit() and the other IP output functions expect to get a skb with clear or properly initialized skb->cb. Unlike TCP and UDP, the dccp_skb_cb doesn't contain a struct inet_skb_parm at the beginning, so the DCCP-specific data is interpreted by the IP output functions. This can cause false negatives for the conditional POST_ROUTING hook invocation, making the packet bypass the hook. Add a inet_skb_parm/inet6_skb_parm union to the beginning of dccp_skb_cb to avoid clashes. Also add a BUILD_BUG_ON to make sure it fits in the cb. [ Combined with patch from Gerrit Renker to remove two now unnecessary memsets of IPCB(skb)->opt ] Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The ax25_uid_free call walks the ax25_uid_list and releases entries from it. The problem is that after the fisrt call to hlist_del_init the hlist_for_each_entry (which hides behind the ax25_uid_for_each) will consider the current position to be the last and will return. Thus, the whole list will be left not freed. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2008 1 次提交
-
-
由 Daniel Lezcano 提交于
Copy the network namespace from the socket to the timewait socket. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Acked-by: NMark Lord <mlord@pobox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2008 4 次提交
-
-
由 David S. Miller 提交于
This fixes kernel bugzilla 10371. As reported by M.Piechaczek@osmosys.tv, if we try to grab a char sized socket option value, as in: unsigned char ttl = 255; socklen_t len = sizeof(ttl); setsockopt(socket, IPPROTO_IP, IP_MULTICAST_TTL, &ttl, &len); getsockopt(socket, IPPROTO_IP, IP_MULTICAST_TTL, &ttl, &len); The ttl returned will be wrong on big-endian, and on both little- endian and big-endian the next three bytes in userspace are written with garbage. It's because of this test in do_ip_getsockopt(): if (len < sizeof(int) && len > 0 && val>=0 && val<255) { It should allow a 'val' of 255 to pass here, but it doesn't so it copies a full 'int' back to userspace. On little-endian that will write the correct value into the location but it spams on the next three bytes in userspace. On big endian it writes the wrong value into the location and spams the next three bytes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Without this patch, the generic L3 tracker would kick in if nf_conntrack_ipv4 was not loaded before nf_nat, which would lead to translation problems with ICMP errors. NAT does not make sense without IPv4 connection tracking anyway, so just add a call to need_ipv4_conntrack(). Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Shifts larger than the data type are undefined, don't try to shift an u32 by 32. Also remove some special-casing of bitmasks divisible by 32. Based on patch by Jan Engelhardt <jengelh@computergmbh.de>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Commit df9dcb45 ([IPSEC]: Fix inter address family IPsec tunnel handling) broke openswan by removing the selector initialization for tunnel mode in case it is uninitialized. This patch restores the initialization, fixing openswan, but probably breaking inter-family tunnels again (unknown since the patch author disappeared). The correct thing for inter-family tunnels is probably to simply initialize the selector family explicitly. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 4月, 2008 2 次提交
-
-
由 Vladimir Koutny 提交于
When associating to a b-only AP where there is no ERP IE, short preamble mode is left at previous state (probably also protection mode). In this case, disable protection and use short preamble mode as specified in capability field. The same is done if capability field is changed on-the-fly. Signed-off-by: NVladimir Koutny <vlado@ksp.sk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David S. Miller 提交于
If print_mac() is used inside of a pr_debug() the compiler can't see that the call is redundant so still performs it even of pr_debug() ends up being a nop. So don't use print_mac() in such cases in hot code paths, use MAC_FMT et al. instead. As noted by Joe Perches, pr_debug() could be modified to handle this better, but that is a change to an interface used by the entire kernel and thus needs to be validated carefully. This here is thus the less risky fix for 2.6.25 Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2008 5 次提交
-
-
由 Ilpo Järvinen 提交于
MTU probe can cause some remedies for FRTO because the normal packet ordering may be violated allowing FRTO to make a wrong decision (it might not be that serious threat for anything though). Thus it's safer to not run FRTO while MTU probe is underway. It seems that the basic FRTO variant should also look for an skb at probe_seq.start to check if that's retransmitted one but I didn't implement it now (plain seqno in window check isn't robust against wraparounds). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
This fixes Bugzilla #10384 tcp_simple_retransmit does L increment without any checking whatsoever for overflowing S+L when Reno is in use. The simplest scenario I can currently think of is rather complex in practice (there might be some more straightforward cases though). Ie., if mss is reduced during mtu probing, it may end up marking everything lost and if some duplicate ACKs arrived prior to that sacked_out will be non-zero as well, leading to S+L > packets_out, tcp_clean_rtx_queue on the next cumulative ACK or tcp_fastretrans_alert on the next duplicate ACK will fix the S counter. More straightforward (but questionable) solution would be to just call tcp_reset_reno_sack() in tcp_simple_retransmit but it would negatively impact the probe's retransmission, ie., the retransmissions would not occur if some duplicate ACKs had arrived. So I had to add reno sacked_out reseting to CA_Loss state when the first cumulative ACK arrives (this stale sacked_out might actually be the explanation for the reports of left_out overflows in kernel prior to 2.6.23 and S+L overflow reports of 2.6.24). However, this alone won't be enough to fix kernel before 2.6.24 because it is building on top of the commit 1b6d427b ([TCP]: Reduce sacked_out with reno when purging write_queue) to keep the sacked_out from overflowing. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Reported-by: NAlessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Fixes a long-standing bug which makes NewReno recovery crippled. With GSO the whole head skb was marked as LOST which is in violation of NewReno procedure that only wants to mark one packet and ended up breaking our TCP code by causing counter overflow because our code was built on top of assumption about valid NewReno procedure. This manifested as triggering a WARN_ON for the overflow in a number of places. It seems relatively safe alternative to just do nothing if tcp_fragment fails due to oom because another duplicate ACK is likely to be received soon and the fragmentation will be retried. Special thanks goes to Soeren Sonnenburg <kernel@nn7.de> who was lucky enough to be able to reproduce this so that the warning for the overflow was hit. It's not as easy task as it seems even if this bug happens quite often because the amount of outstanding data is pretty significant for the mismarkings to lead to an overflow. Because it's very late in 2.6.25-rc cycle (if this even makes in time), I didn't want to touch anything with SACK enabled here. Fragmenting might be useful for it as well but it's more or less a policy decision rather than mandatory fix. Thus there's no need to rush and we can postpone considering tcp_fragment with SACK for 2.6.26. In 2.6.24 and earlier, this very same bug existed but the effect is slightly different because of a small changes in the if conditions that fit to the patch's context. With them nothing got lost marker and thus no retransmissions happened. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
The fast retransmission can be forced locally to the rfc3517 branch in tcp_update_scoreboard instead of making such fragile constructs deeper in tcp_mark_head_lost. This is necessary for the next patch which must not have loopholes for cnt > packets check. As one can notice, readability got some improvements too because of this :-). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This fixes the STA AID setting and actually makes hostapd/mac80211 work properly in presence of power-saving stations. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 4月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
These entries are allocated in vlan_dev_set_egress_priority, but are never released and leaks on vlan device removal. Drop these in vlan's ->uninit callback - after the device is brought down and everyone is notified about it is going to be unregistered. Found during testing vlan netnsization patchset. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2008 4 次提交
-
-
由 Denis V. Lunev 提交于
Anycast DST entries allocated inside ipv6_dev_ac_inc are leaked when network device is stopped without removing IPv6 addresses from it. The bug has been observed in the reality on 2.6.18-rhel5 kernel. In the above case addrconf_ifdown marks all entries as obsolete and ip6_del_rt called from __ipv6_dev_ac_dec returns ENOENT. The referrence is not dropped. The fix is simple. DST entry should not keep referrence when stored in the FIB6 tree. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
In the other case it will be destroyed when last address will be removed from lo inside a namespace. This will break IPv6 in several places. The most obvious one is ip6_dst_ifdown. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The ICMP relookup path is only meant to modify behaviour when appropriate IPsec policies are in place and marked as requiring relookups. It is certainly not meant to modify behaviour when IPsec policies don't exist at all. However, due to an oversight on the error paths existing behaviour may in fact change should one of the relookup steps fail. This patch corrects this by redirecting all errors on relookup failures to the previous code path. That is, if the initial xfrm_lookup let the packet pass, we will stand by that decision should the relookup fail due to an error. This should be safe from a security point-of-view because compliant systems must install a default deny policy so the packet would'nt have passed in that case. Many thanks to Julian Anastasov for pointing out this error. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2008 3 次提交
-
-
由 Pavel Emelyanov 提交于
This may lead to situations, when each of two proc entries produce data for the other's device. Looks like a BUG, so this patch is for net-2.6. It will not apply to net-2.6.26 since dev->nd_net access is replaced with dev_net(dev) one. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When we encounter an error while looking up the dst the second time we need to drop the first dst. This patch is pretty much the same as the one for IPv4. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benoit Boissinot 提交于
From RFC341: A temporary address is created only if this calculated Preferred Lifetime is greater than REGEN_ADVANCE time units. In particular, an implementation must not create a temporary address with a zero Preferred Lifetime. Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-