- 17 9月, 2012 8 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
Pull mfd fixes from Samuel Ortiz: "This is the remaining MFD fixes for 3.6, with 5 pending fixes: - A tps65217 build error fix. - A lcp_ich regression fix caused by the MFD driver failing to initialize the watchdog sub device due to ACPI conflicts. - 2 MAX77693 interrupt handling bug fixes. - An MFD core fix, adding an IRQ domain argument to the MFD device addition API in order to prevent silent and potentially harmful remapping behaviour changes for drivers supporting non-DT platforms." * tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: MAX77693: Fix NULL pointer error when initializing irqs mfd: MAX77693: Fix interrupt handling bug mfd: core: Push irqdomain mapping out into devices mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver mfd: Move tps65217 regulator plat data handling to regulator
-
git://gitorious.org/linux-pwm/linux-pwm由 Linus Torvalds 提交于
Pull pwm fixes from Thierry Reding: "While this comes a bit later than I had wished, both patches are rather minor and touch only new drivers so I think these are still safe for merging." * tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm: pwm: pwm-tiehrpwm: Fix conflicting channel period setting pwm: pwm-tiecap: Disable APWM mode after configure
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull scsi target fixes from Nicholas Bellinger: "Here is the current set of target-pending fixes headed for v3.6-final The main parts of this series include bug-fixes from Paolo Bonzini to address an use-after-free bug in pSCSI sense exception handling, along with addressing some long-standing bugs wrt the handling of zero- length SCSI CDB payloads also specific to pSCSI pass-through device backends." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: go through normal processing for zero-length REQUEST_SENSE target: support zero allocation length in REQUEST SENSE target: support zero-size allocation lengths in transport_kmap_data_sg target: fail REPORT LUNS with less than 16 bytes of payload target: report too-small parameter lists everywhere target: go through normal processing for zero-length PSCSI commands target: fix use-after-free with PSCSI sense data target: simplify code around transport_get_sense_data target: move transport_get_sense_data target: Check idr_get_new return value in iscsi_login_zero_tsih_s1 target: Fix ->data_length re-assignment bug with SCSI overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael J. Wysocki: "Three ACPI device power management fixes related to checking and setting device power states." * tag 'pm-for-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Use KERN_DEBUG when no power resources are found ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device ACPI / PM: Infer parent power state from child if unknown, v2
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull a btrfs revert from Chris Mason: "My for-linus branch has one revert in the new quota code. We're building up more fixes at etc for the next merge window, but I'm keeping them out unless they are bigger regressions or have a huge impact." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull more sound fixes from Takashi Iwai: "Yet more (a bunch of) small fixes that slipped from the previous pull request. Most of commits are pending ASoC fixes, all of which are fairly trivial commits." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8904: correct the index ALSA: hda - Yet another position_fix quirk for ASUS machines ASoC: tegra: fix maxburst settings in dmaengine code ASoC: samsung dma - Don't indicate support for pause/resume. ASoC: mc13783: Remove mono support ASoC: arizona: Fix typo in 44.1kHz rates ASoC: spear: correct the check for NULL dma_buffer pointer sound: tegra_alc5632: remove HP detect GPIO inversion ASoC: atmel-ssc: include linux/io.h for raw io ASoC: dapm: Don't force card bias level to be updated ASoC: dapm: Make sure we update the bias level for CODECs with no op ASoC: am3517evm: fix error return code ASoC: ux500_msp_i2s: better use devm functions and fix error return code ASoC: imx-sgtl5000: fix error return code
-
由 Linus Torvalds 提交于
This reverts commit 970e1789. Nikolay Ulyanitsky reported thatthe 3.6-rc5 kernel has a 15-20% performance drop on PostgreSQL 9.2 on his machine (running "pgbench"). Borislav Petkov was able to reproduce this, and bisected it to this commit 970e1789 ("sched: Improve scalability via 'CPU buddies' ...") apparently because the new single-idle-buddy model simply doesn't find idle CPU's to reschedule on aggressively enough. Mike Galbraith suspects that it is likely due to the user-mode spinlocks in PostgreSQL not reacting well to preemption, but we don't really know the details - I'll just revert the commit for now. There are hopefully other approaches to improve scheduler scalability without it causing these kinds of downsides. Reported-by: NNikolay Ulyanitsky <lystor@gmail.com> Bisected-by: NBorislav Petkov <bp@alien8.de> Acked-by: NMike Galbraith <efault@gmx.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 9月, 2012 3 次提交
-
-
由 Chanwoo Choi 提交于
This patch initialize register map of MUIC device because mfd driver of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of Maxim MAX77693 is initialized before call max77693-muic probe() function. Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reported-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Chanwoo Choi 提交于
This patch fix bug related to interrupt handling for MAX77693 devices. - Unmask interrupt masking bit for charger/flash/muic to revolve that interrupt isn't happened when external connector is attached. - Fix wrong regmap instance when muic interrupt is happened. This patch were discussed and confirm discussion about this patch on below url: http://lkml.org/lkml/2012/7/16/118Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 15 9月, 2012 23 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
ASoC: Updates for 3.6 A bigger set of updates than I'm entirely comfortable with - things backed up a bit due to travel. As ever the majority of these are small, focused updates for specific drivers though there are a couple of core changes. There's been good exposure in -next. The AT91 patch fixes a build break.
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull GFS2 fixes from Steven Whitehouse: "Here are three GFS2 fixes for the current kernel tree. These are all related to the block reservation code which was added at the merge window. That code will be getting an update at the forthcoming merge window too. In the mean time though there are a few smaller issues which should be fixed. The first patch resolves an issue with write sizes of greater than 32 bits with the size hinting code. The second ensures that the allocation data structure is initialised when using xattrs and the third takes into account allocations which may have been made by other nodes which affect a reservation on the local node." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Take account of blockages when using reserved blocks GFS2: Fix missing allocation data for set/remove xattr GFS2: Make write size hinting code common
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Matthew Garrett: "A few small updates for 3.6 - a trivial regression fix and a couple of conformance updates for the gmux driver, plus some tiny fixes for asus-wmi, eeepc-laptop and thinkpad_acpi." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: thinkpad_acpi: buffer overflow in fan_get_status() eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug() platform/x86: fix asus_laptop.wled_type description asus-laptop: HRWS/HWRS typo drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEO apple-gmux: Fix port address calculation in gmux_pio_write32() apple-gmux: Fix index read functions apple-gmux: Obtain version info from indexed gmux
-
git://git.pengutronix.de/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c embedded fixes from Wolfram Sang: "The last bunch of (typical) i2c-embedded driver fixes for 3.6. Also update the MAINTAINERS file to point to my tree since people keep asking where to find their patches." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: algo: pca: Fix mode selection for PCA9665 MAINTAINERS: fix tree for current i2c-embedded development i2c: mxs: correctly setup speed for non devicetree i2c: pnx: Fix read transactions of >= 2 bytes i2c: pnx: Fix bit definitions
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: - Fixes a regression, introduced in 3.6-rc1, when a file is closed before its shared memory mapping is dirtied and unmapped. The lower file was being released when the eCryptfs file was closed and the dirtied pages could not be written out. - Adds a call to the lower filesystem's ->flush() from ecryptfs_flush(). - Fixes a regression, introduced in 2.6.39, when a file is renamed on top of another file. The target file's inode was not being evicted and the space taken by the file was not reclaimed until eCryptfs was unmounted. * tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Copy up attributes of the lower target inode after rename eCryptfs: Call lower ->flush() from ecryptfs_flush() eCryptfs: Write out all dirty pages just before releasing the lower file
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull one more DMA-mapping fix from Marek Szyprowski: "This patch fixes very subtle bug (typical off-by-one error) which might appear in very rare circumstances." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: mm: fix DMA pool affiliation check
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: "Fix word size register read and write operations in ina2xx driver, and initialize uninitialized structure elements in twl4030-madc-hwmon driver." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ina2xx) Fix word size register read and write operations hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "I realise this a bit bigger than I would want at this point. Exynos is a large chunk, I got them to half what they wanted already, and hey its ARM based, so not going to hurt many people. Radeon has only two fixes, but the PLL fixes were a bit bigger, but required for a lot of scenarios, the fence fix is really urgent. vmwgfx: I've pulled in a dumb ioctl support patch that I was going to shove in later and cc stable, but we need it asap, its mainly to stop mesa growing a really ugly dependency in userspace to run stuff on vmware, and if I don't stick it in the kernel now, everyone will have to ship ugly userspace libs to workaround it. nouveau: single urgent fix found in F18 testing, causes X to not start properly when f18 plymouth is used i915: smattering of fixes and debug quieting gma500: single regression fix So as I said a bit large, but its fairly well scattered and its all stuff I'll be shipping in F18's 3.6 kernel." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits) drm/nouveau: fix booting with plymouth + dumb support drm/radeon: make 64bit fences more robust v3 drm/radeon: rework pll selection (v3) drm: Drop the NV12M and YUV420M formats drm/exynos: remove DRM_FORMAT_NV12M from plane module drm/exynos: fix double call of drm_prime_(init/destroy)_file_private drm/exynos: add dummy support for dmabuf-mmap drm/exynos: Add missing braces around sizeof in exynos_mixer.c drm/exynos: Add missing braces around sizeof in exynos_hdmi.c drm/exynos: Make g2d_pm_ops static drm/exynos: Add dependency for G2D in Kconfig drm/exynos: fixed page align bug. drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/exynos: Use devm_* functions in exynos_drm_g2d.c file drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file drm/exynos: Remove redundant check in exynos_drm_fimd.c file drm/exynos: Remove redundant check in exynos_hdmi.c file vmwgfx: add dumb ioctl support gma500: Fix regression on Oaktrail devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Smaller fixlets" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix kernel-doc warnings in kernel/sched/fair.c sched: Unthrottle rt runqueues in __disable_runtime() sched: Add missing call to calc_load_exit_idle() sched: Fix load avg vs cpu-hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "This tree includes various fixes" Ingo really needs to improve on the whole "explain git pull" part. "Various fixes" indeed. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/hwpb: Invoke __perf_event_disable() if interrupts are already disabled perf/x86: Enable Intel Cedarview Atom suppport perf_event: Switch to internal refcount, fix race with close() oprofile, s390: Fix uninitialized memory access when writing to oprofilefs perf/x86: Fix microcode revision check for SNB-PEBS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull a core sparse warning fix from Ingo Molnar * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm/memblock: Use NULL instead of 0 for pointers
-
由 Chris Mason 提交于
This reverts commit 5986802c. Both paths are not error paths but regular cases where non-qgroup subvols are involved. Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Use after free and new device IDs in bluetooth from Andre Guedes, Yevgeniy Melnichuk, Gustavo Padovan, and Henrik Rydberg. 2) Fix crashes with short packet lengths and VLAN in pktgen, from Nishank Trivedi. 3) mISDN calls flush_work_sync() with locks held, fix from Karsten Keil. 4) Packet scheduler gred parameters are reported to userspace improperly scaled, and WRED idling is not performed correctly. All from David Ward. 5) Fix TCP socket refcount problem in ipv6, from Julian Anastasov. 6) ibmveth device has RX queue alignment requirements which are not being explicitly met resulting in sporadic failures, fix from Santiago Leon. 7) Netfilter needs to take care when interpreting sockets attached to socket buffers, they could be time-wait minisockets. Fix from Eric Dumazet. 8) sock_edemux() has the same issue as netfilter did in #7 above, fix from Eric Dumazet. 9) Avoid infinite loops in CBQ scheduler with some configurations, from Eric Dumazet. 10) Deal with "Reflection scan: an Off-Path Attack on TCP", from Jozsef Kadlecsik. 11) SCTP overcharges socket for TX packets, fix from Thomas Graf. 12) CODEL packet scheduler should not reset it's state every time it builds a new flow, fix from Eric Dumazet. 13) Fix memory leak in nl80211, from Wei Yongjun. 14) NETROM doesn't check skb_copy_datagram_iovec() return values, from Alan Cox. 15) l2tp ethernet was using sizeof(ETH_HLEN) instead of plain ETH_HLEN, oops. From Eric Dumazet. 16) Fix selection of ath9k chips on which PA linearization and AM2PM predistoration are used, from Felix Fietkau. 17) Flow steering settings in mlx4 driver need to be validated properly, from Hadar Hen Zion. 18) bnx2x doesn't show the correct link duplex setting, from Yaniv Rosner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) pktgen: fix crash with vlan and packet size less than 46 bnx2x: Add missing afex code bnx2x: fix registers dumped bnx2x: correct advertisement of pause capabilities bnx2x: display the correct duplex value bnx2x: prevent timeouts when using PFC bnx2x: fix stats copying logic bnx2x: Avoid sending multiple statistics queries net: qmi_wwan: call subdriver with control intf only net_sched: gred: actually perform idling in WRED mode net_sched: gred: fix qave reporting via netlink net_sched: gred: eliminate redundant DP prio comparisons net_sched: gred: correct comment about qavg calculation in RIO mode mISDN: Fix wrong usage of flush_work_sync while holding locks netfilter: log: Fix log-level processing net-sched: sch_cbq: avoid infinite loop net: qmi_wwan: fix Gobi device probing for un2430 net: fix net/core/sock.c build error ixp4xx_hss: fix build failure due to missing linux/module.h inclusion caif: move the dereference below the NULL test ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB patches from Greg Kroah-Hartman: "Here are a number of USB patches, a bit more than I normally like this late in the -rc series, but given people's vacations (myself included), and the kernel summit, it seems to have happened this way. All are tiny, but they add up. A number of gadget and xhci fixes, and a few new device ids. All have been tested in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low usb: chipidea: cleanup dma_pool if udc_start() fails usb: chipidea: udc: fix error path in udc_start() usb: chipidea: udc: add pullup fuction, needed by the uvc gadget usb: chipidea: udc: fix setup of endpoint maxpacket size USB: option: replace ZTE K5006-Z entry with vendor class rule EHCI: Update qTD next pointer in QH overlay region during unlink USB: cdc-wdm: fix wdm_find_device* return value USB: ftdi_sio: do not claim CDC ACM function usb: dwc3: gadget: fix pending isoc handling usb: renesas_usbhs: fixup DMA transport data alignment usb: gadget: at91udc: Don't check for ep->ep.desc usb: gadget: at91udc: don't overwrite driver data usb: dwc3: core: fix incorrect usage of resource pointer usb: musb: musbhsdma: fix IRQ check usb: musb: tusb6010: fix error path in tusb_probe() usb: musb: host: fix for musb_start_urb Oops usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh usb: gadget: dummy_hcd: fixup error probe path usb: gadget: s3c-hsotg.c: fix error return code ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull TTY fixes from Greg Kroah-Hartman: "Here are 2 tiny patches for a serial driver to resolve issues that people have reported with the 3.6-rc tree. Both of these have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: imx: don't reinit clock in imx_setup_ufcr() tty: serial: imx: console write routing is unsafe on SMP
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging tree fixes from Greg Kroah-Hartman: "Here are a few staging tree fixes for problems that have been reported. Nothing major, just a number of tiny driver fixes. All of these have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: drm/omap: add more new timings fields drm/omap: update for interlaced staging: r8712u: fix bug in r8712_recv_indicatepkt() staging: zcache: fix cleancache race condition with shrinker Staging: Android alarm: IOCTL command encoding fix staging: vt6656: [BUG] - Failed connection, incorrect endian. staging: ozwpan: fix memcmp() test in oz_set_active_pd() staging: wlan-ng: Fix problem with wrong arguments staging: comedi: das08: Correct AO output for das08jr-16-ao staging: comedi: das08: Correct AI encoding for das08jr-16-ao staging: comedi: das08: Fix PCI ref count staging: comedi: amplc_pci230: Fix PCI ref count staging: comedi: amplc_pc263: Fix PCI ref count staging: comedi: amplc_pc236: Fix PCI ref count staging: comedi: amplc_dio200: Fix PCI ref count staging: comedi: amplc_pci224: Fix PCI ref count drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR staging iio: fix potential memory leak in lis3l02dq_ring.c staging:iio: prevent divide by zero bugs
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core fix from Greg Kroah-Hartman: "Here is one fix for 3.6-rc6 for the kobject.h file. It fixes a reported oops if CONFIG_HOTPLUG is disabled. It's been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"
-
由 Linus Torvalds 提交于
We already use them for openat() and friends, but fstat() also wants to be able to use O_PATH file descriptors. This should make it more directly comparable to the O_SEARCH of Solaris. Note that you could already do the same thing with "fstatat()" and an empty path, but just doing "fstat()" directly is simpler and faster, so there is no reason not to just allow it directly. See also commit 332a2e12, which did the same thing for fchdir, for the same reasons. Reported-by: Nольга крыжановская <olga.kryzhanovska@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aaron Lu 提交于
commit a606dac3 adds support to link devices which have _PRx, if a device does not have _PRx, a warning message will be printed. This commit is for ZPODD on Intel ZPODD capable platforms, on other platforms, it has no problem if there is no power resource for this device, so a warning here is not appropriate, change it to debug. Reported-by: NBorislav Petkov <bp@amd64.org> Signed-off-by: NAaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Bo Shen 提交于
Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Tyler Hicks 提交于
After calling into the lower filesystem to do a rename, the lower target inode's attributes were not copied up to the eCryptfs target inode. This resulted in the eCryptfs target inode staying around, rather than being evicted, because i_nlink was not updated for the eCryptfs inode. This also meant that eCryptfs didn't do the final iput() on the lower target inode so it stayed around, as well. This would result in a failure to free up space occupied by the target file in the rename() operation. Both target inodes would eventually be evicted when the eCryptfs filesystem was unmounted. This patch calls fsstack_copy_attr_all() after the lower filesystem does its ->rename() so that important inode attributes, such as i_nlink, are updated at the eCryptfs layer. ecryptfs_evict_inode() is now called and eCryptfs can drop its final reference on the lower inode. http://launchpad.net/bugs/561129Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Tested-by: NColin Ian King <colin.king@canonical.com> Cc: <stable@vger.kernel.org> [2.6.39+]
-
由 Tyler Hicks 提交于
Since eCryptfs only calls fput() on the lower file in ecryptfs_release(), eCryptfs should call the lower filesystem's ->flush() from ecryptfs_flush(). If the lower filesystem implements ->flush(), then eCryptfs should try to flush out any dirty pages prior to calling the lower ->flush(). If the lower filesystem does not implement ->flush(), then eCryptfs has no need to do anything in ecryptfs_flush() since dirty pages are now written out to the lower filesystem in ecryptfs_release(). Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
-
由 Tyler Hicks 提交于
Fixes a regression caused by: 821f7494 eCryptfs: Revert to a writethrough cache model That patch reverted some code (specifically, 32001d6f) that was necessary to properly handle open() -> mmap() -> close() -> dirty pages -> munmap(), because the lower file could be closed before the dirty pages are written out. Rather than reapplying 32001d6f, this approach is a better way of ensuring that the lower file is still open in order to handle writing out the dirty pages. It is called from ecryptfs_release(), while we have a lock on the lower file pointer, just before the lower file gets the final fput() and we overwrite the pointer. https://launchpad.net/bugs/1047261Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Reported-by: NArtemy Tregubenko <me@arty.name> Tested-by: NArtemy Tregubenko <me@arty.name> Tested-by: NColin Ian King <colin.king@canonical.com>
-
- 14 9月, 2012 6 次提交
-
-
由 Thomas Kavanagh 提交于
The code currently always selects turbo mode for PCA9665, no matter which clock frequency is configured. This is because it compares the clock frequency against constants reflecting (boundary / 100). Compare against real boundary frequencies to fix the problem. Signed-off-by: NThomas Kavanagh <tkavanagh@juniper.net> Signed-off-by: NGuenter Roeck <groeck@juniper.net> Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wolfram Sang 提交于
Guide people to where their patches can be found these days. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NJean Delvare <khali@linux-fr.org> Acked-by: NBen Dooks <ben-linux@fluff.org>
-
由 Dave Airlie 提交于
We noticed a plymouth bug on Fedora 18, and I then noticed this stupid thinko, fixing it fixed the problem with plymouth. Cc: stable@vger.kernel.org Acked-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Alex writes: This is the current set of radeon fixes for 3.6. Two small fixes: - fix the fence issues introduced in 3.5 with 64-bit fences - PLL fix for multiple DP heads * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: make 64bit fences more robust v3 drm/radeon: rework pll selection (v3)
-
由 Lin Ming 提交于
Commit 0090def6("ACPI: Add interface to register/unregister device to/from power resources") used resource_lock to protect the devices list that relies on power resource. It caused a mutex dead lock, as below acpi_power_on ---> lock resource_lock __acpi_power_on acpi_power_on_device acpi_power_get_inferred_state acpi_power_get_list_state ---> lock resource_lock This patch adds a new mutex "devices_lock" to protect the devices list and calls acpi_power_on_device in acpi_power_on, instead of __acpi_power_on, after the resource_lock is released. [rjw: Changed data type of a boolean variable to bool.] Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NAaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
It turns out that there are ACPI BIOSes defining device objects with _PSx and without either _PSC or _PRx. For devices corresponding to those ACPI objetcs __acpi_bus_get_power() returns ACPI_STATE_UNKNOWN and their initial power states are regarded as unknown as a result. If such a device is a parent of another power-manageable device, the child cannot be put into a low-power state through ACPI, because __acpi_bus_set_power() refuses to change power states of devices whose parents' power states are unknown. To work around this problem, observe that the ACPI power state of a device cannot be higher-power (lower-number) than the power state of its parent. Thus, if the device's _PSC method or the configuration of its power resources indicates that the device is in D0, the device's parent has to be in D0 as well. Consequently, if the parent's power state is unknown when we've just learned that its child's power state is D0, we can safely set the parent's power.state field to ACPI_STATE_D0. Tested-by: NAaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-