The function is only used in kvm.ko module.
Reviewed-by: NMark Kanda <mark.kanda@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When L1 guest uses 5-level paging, it fails vm-entry to L2 due to
invalid host-state. It needs to add CR4_LA57 bit to nested CR4_FIXED1
MSR.
Signed-off-by: NChenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: NXiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NMark Kanda <mark.kanda@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Not zeroing the bitmap used for identifying the destination vCPUs for an
IOAPIC scan request in fixed delivery mode could lead to waking up unwanted
vCPUs. This patch zeroes the vCPU bitmap before passing it to
kvm_bitmap_or_dest_vcpus(), which is responsible for setting the bitmap
with the bits corresponding to the destination vCPUs.

Fixes: 7ee30bc1("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: NNitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: small fixes and enhancements

- selftest improvements
- yield improvements
- cleanups

In IOAPIC fixed delivery mode instead of flushing the scan
requests to all vCPUs, we should only send the requests to
vCPUs specified within the destination field.

This patch introduces kvm_get_dest_vcpus_mask() API which
retrieves an array of target vCPUs by using
kvm_apic_map_get_dest_lapic() and then based on the
vcpus_idx, it sets the bit in a bitmap. However, if the above
fails kvm_get_dest_vcpus_mask() finds the target vCPUs by
traversing all available vCPUs. Followed by setting the
bits in the bitmap.

If we had different vCPUs in the previous request for the
same redirection table entry then bits corresponding to
these vCPUs are also set. This to done to keep
ioapic_handled_vectors synchronized.

This bitmap is then eventually passed on to
kvm_make_vcpus_request_mask() to generate a masked request
only for the target vCPUs.

This would enable us to reduce the latency overhead on isolated
vCPUs caused by the IPI to process due to KVM_REQ_IOAPIC_SCAN.
Suggested-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NNitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fetching an index for any vcpu in kvm->vcpus array by traversing
the entire array everytime is costly.
This patch remembers the position of each vcpu in kvm->vcpus array
by storing it in vcpus_idx under kvm_vcpu structure.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NNitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The L1 hypervisor may include the IA32_TIME_STAMP_COUNTER MSR in the
vmcs12 MSR VM-exit MSR-store area as a way of determining the highest
TSC value that might have been observed by L2 prior to VM-exit. The
current implementation does not capture a very tight bound on this
value.  To tighten the bound, add the IA32_TIME_STAMP_COUNTER MSR to the
vmcs02 VM-exit MSR-store area whenever it appears in the vmcs12 VM-exit
MSR-store area.  When L0 processes the vmcs12 VM-exit MSR-store area
during the emulation of an L2->L1 VM-exit, special-case the
IA32_TIME_STAMP_COUNTER MSR, using the value stored in the vmcs02
VM-exit MSR-store area to derive the value to be stored in the vmcs12
VM-exit MSR-store area.
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NAaron Lewis <aaronlewis@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename function find_msr() to vmx_find_msr_index() in preparation for an
upcoming patch where we export it and use it in nested.c.
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NAaron Lewis <aaronlewis@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename NR_AUTOLOAD_MSRS to NR_LOADSTORE_MSRS.  This needs to be done
due to the addition of the MSR-autostore area that will be added in a
future patch.  After that the name AUTOLOAD will no longer make sense.
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NAaron Lewis <aaronlewis@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the function read_and_check_msr_entry() which just pulls some code
out of nested_vmx_store_msr().  This will be useful as reusable code in
upcoming patches.
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NAaron Lewis <aaronlewis@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Correct a small inaccuracy in the shattering of vmx.c, which becomes
visible now that pmu_intel.c includes nested.h.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The "load IA32_PERF_GLOBAL_CTRL" bit for VM-entry and VM-exit should
only be exposed to the guest if IA32_PERF_GLOBAL_CTRL is a valid MSR.
Create a new helper to allow pmu_refresh() to update the VM-Entry and
VM-Exit controls to ensure PMU values are initialized when performing
the is_valid_msr() check.
Suggested-by: NJim Mattson <jmattson@google.com>
Co-developed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add condition to prepare_vmcs02 which loads IA32_PERF_GLOBAL_CTRL on
VM-entry if the "load IA32_PERF_GLOBAL_CTRL" bit on the VM-entry control
is set. Use SET_MSR_OR_WARN() rather than directly writing to the field
to avoid overwrite by atomic_switch_perf_msrs().
Suggested-by: NJim Mattson <jmattson@google.com>
Co-developed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The existing implementation for loading the IA32_PERF_GLOBAL_CTRL MSR
on VM-exit was incorrect, as the next call to atomic_switch_perf_msrs()
could cause this value to be overwritten. Instead, call kvm_set_msr()
which will allow atomic_switch_perf_msrs() to correctly set the values.

Define a macro, SET_MSR_OR_WARN(), to set the MSR with kvm_set_msr()
and WARN on failure.
Suggested-by: NJim Mattson <jmattson@google.com>
Co-developed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a consistency check on nested vm-entry for host's
IA32_PERF_GLOBAL_CTRL from vmcs12. Per Intel's SDM Vol 3 26.2.2:

  If the "load IA32_PERF_GLOBAL_CTRL"
  VM-exit control is 1, bits reserved in the IA32_PERF_GLOBAL_CTRL
  MSR must be 0 in the field for that register"
Suggested-by: NJim Mattson <jmattson@google.com>
Co-developed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add condition to nested_vmx_check_guest_state() to check the validity of
GUEST_IA32_PERF_GLOBAL_CTRL. Per Intel's SDM Vol 3 26.3.1.1:

  If the "load IA32_PERF_GLOBAL_CTRL" VM-entry control is 1, bits
  reserved in the IA32_PERF_GLOBAL_CTRL MSR must be 0 in the field for that
  register.
Suggested-by: NJim Mattson <jmattson@google.com>
Co-developed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Create a helper function to check the validity of a proposed value for
IA32_PERF_GLOBAL_CTRL from the existing check in intel_pmu_set_msr().

Per Intel's SDM, the reserved bits in IA32_PERF_GLOBAL_CTRL must be
cleared for the corresponding host/guest state fields.
Suggested-by: NJim Mattson <jmattson@google.com>
Co-developed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NPeter Shier <pshier@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On kvm_create_max_vcpus test remove unneeded local
variable in the loop that add vcpus to the VM.
Signed-off-by: NWainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When KVM emulates a nested VMEntry (L1->L2 VMEntry), it switches mmu root
page. If nEPT is used, this will happen from
kvm_init_shadow_ept_mmu()->__kvm_mmu_new_cr3() and otherwise it will
happpen from nested_vmx_load_cr3()->kvm_mmu_new_cr3(). Either case,
__kvm_mmu_new_cr3() will use fast_cr3_switch() in attempt to switch to a
previously cached root page.

In case fast_cr3_switch() finds a matching cached root page, it will
set it in mmu->root_hpa and request KVM_REQ_LOAD_CR3 such that on
next entry to guest, KVM will set root HPA in appropriate hardware
fields (e.g. vmcs->eptp). In addition, fast_cr3_switch() calls
kvm_x86_ops->tlb_flush() in order to flush TLB as MMU root page
was replaced.

This works as mmu->root_hpa, which vmx_flush_tlb() use, was
already replaced in cached_root_available(). However, this may
result in unnecessary INVEPT execution because a KVM_REQ_TLB_FLUSH
may have already been requested. For example, by prepare_vmcs02()
in case L1 don't use VPID.

Therefore, change fast_cr3_switch() to just request TLB flush on
next entry to guest.
Reviewed-by: NBhavesh Davda <bhavesh.davda@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, a host perf_event is created for a vPMC functionality emulation.
It’s unpredictable to determine if a disabled perf_event will be reused.
If they are disabled and are not reused for a considerable period of time,
those obsolete perf_events would increase host context switch overhead that
could have been avoided.

If the guest doesn't WRMSR any of the vPMC's MSRs during an entire vcpu
sched time slice, and its independent enable bit of the vPMC isn't set,
we can predict that the guest has finished the use of this vPMC, and then
do request KVM_REQ_PMU in kvm_arch_sched_in and release those perf_events
in the first call of kvm_pmu_handle_event() after the vcpu is scheduled in.

This lazy mechanism delays the event release time to the beginning of the
next scheduled time slice if vPMC's MSRs aren't changed during this time
slice. If guest comes back to use this vPMC in next time slice, a new perf
event would be re-created via perf_event_create_kernel_counter() as usual.
Suggested-by: NWei Wang <wei.w.wang@intel.com>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLike Xu <like.xu@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is
a heavyweight and high-frequency operation, especially when host disables
the watchdog (maximum 21000000 ns) which leads to an unacceptable latency
of the guest NMI handler. It limits the use of vPMUs in the guest.

When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop
and release its existing perf_event (if any) every time EVEN in most cases
almost the same requested perf_event will be created and configured again.

For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl'
for fixed) is the same as its current config AND a new sample period based
on pmc->counter is accepted by host perf interface, the current event could
be reused safely as a new created one does. Otherwise, do release the
undesirable perf_event and reprogram a new one as usual.

It's light-weight to call pmc_pause_counter (disable, read and reset event)
and pmc_resume_counter (recalibrate period and re-enable event) as guest
expects instead of release-and-create again on any condition. Compared to
use the filterable event->attr or hw.config, a new 'u64 current_config'
field is added to save the last original programed config for each vPMC.

Based on this implementation, the number of calls to pmc_reprogram_counter
is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event.
In the usage of multiplexing perf sampling mode, the average latency of the
guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up).
If host disables watchdog, the minimum latecy of guest NMI handler could be
speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average.
Suggested-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NLike Xu <like.xu@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce a new callback msr_idx_to_pmc that returns a struct kvm_pmc*,
and change kvm_pmu_is_valid_msr to return ".msr_idx_to_pmc(vcpu, msr) ||
.is_valid_msr(vcpu, msr)" and AMD just returns false from .is_valid_msr.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NLike Xu <like.xu@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The leagcy pmu_ops->msr_idx_to_pmc is only called in kvm_pmu_rdpmc, so
this function actually receives the contents of ECX before RDPMC, and
translates it to a kvm_pmc. Let's clarify its semantic by renaming the
existing msr_idx_to_pmc to rdpmc_ecx_to_pmc, and is_valid_msr_idx to
is_valid_rdpmc_ecx; likewise for the wrapper kvm_pmu_is_valid_msr_idx.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NLike Xu <like.xu@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Exporting perf_event_pause() as an external accessor for kernel users (such
as KVM) who may do both disable perf_event and read count with just one
time to hold perf_event_ctx_lock. Also the value could be reset optionally.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NLike Xu <like.xu@linux.intel.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, perf_event_period() is used by user tools via ioctl. Based on
naming convention, exporting perf_event_period() for kernel users (such
as KVM) who may recalibrate the event period for their assigned counter
according to their requirements.

The perf_event_period() is an external accessor, just like the
perf_event_{en,dis}able() and should thus use perf_event_ctx_lock().
Suggested-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NLike Xu <like.xu@linux.intel.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When L1 don't use TPR-Shadow to run L2, L0 configures vmcs02 without
TPR-Shadow and install intercepts on CR8 access (load and store).

If L1 do not intercept L2 CR8 access, L0 intercepts on those accesses
will emulate load/store on L1's LAPIC TPR. If in this case L2 lowers
TPR such that there is now an injectable interrupt to L1,
apic_update_ppr() will request a KVM_REQ_EVENT which will trigger a call
to update_cr8_intercept() to update TPR-Threshold to highest pending IRR
priority.

However, this update to TPR-Threshold is done while active vmcs is
vmcs02 instead of vmcs01. Thus, when later at some point L0 will
emulate an exit from L2 to L1, L1 will still run with high
TPR-Threshold. This will result in every VMEntry to L1 to immediately
exit on TPR_BELOW_THRESHOLD and continue to do so infinitely until
some condition will cause KVM_REQ_EVENT to be set.
(Note that TPR_BELOW_THRESHOLD exit handler do not set KVM_REQ_EVENT
until apic_update_ppr() will notice a new injectable interrupt for PPR)

To fix this issue, change update_cr8_intercept() such that if L2 lowers
L1's TPR in a way that requires to lower L1's TPR-Threshold, save update
to TPR-Threshold and apply it to vmcs01 when L0 emulates an exit from
L2 to L1.
Reviewed-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functional changes.
Reviewed-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This check is unnecessary as x86 update_cr8_intercept() which calls
this VMX/SVM specific callback already performs this check.
Reviewed-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There are some duplicate code in kvm_pv_send_ipi when deal with ipi
bitmap. Add helper func to remove it, and eliminate odd out label,
get rid of unnecessary kvm_lapic_irq field init and so on.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When SYSCALL/SYSENTER ability check failed, cs and ss is inited but
remain not used. Delay initializing cs and ss until SYSCALL/SYSENTER
ability check passed.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The out_err label and var ret is unnecessary, clean them up.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel SDM section 25.2 OTHER CAUSES OF VM EXITS specifies the following
on INIT signals: "Such exits do not modify register state or clear pending
events as they would outside of VMX operation."

When commit 4b9852f4 ("KVM: x86: Fix INIT signal handling in various CPU states")
was applied, I interepted above Intel SDM statement such that
INIT_SIGNAL exit don’t consume the LAPIC INIT pending event.

However, when Nadav Amit run matching kvm-unit-test on a bare-metal
machine, it turned out my interpetation was wrong. i.e. INIT_SIGNAL
exit does consume the LAPIC INIT pending event.
(See: https://www.spinics.net/lists/kvm/msg196757.html)

Therefore, fix KVM code to behave as observed on bare-metal.

Fixes: 4b9852f4 ("KVM: x86: Fix INIT signal handling in various CPU states")
Reported-by: NNadav Amit <nadav.amit@gmail.com>
Reviewed-by: NMihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 4b9852f4 ("KVM: x86: Fix INIT signal handling in various CPU states")
fixed KVM to also latch pending LAPIC INIT event when vCPU is in VMX
operation.

However, current API of KVM_SET_MP_STATE allows userspace to put vCPU
into KVM_MP_STATE_SIPI_RECEIVED or KVM_MP_STATE_INIT_RECEIVED even when
vCPU is in VMX operation.

Fix this by introducing a util method to check if vCPU state latch INIT
signals and use it in KVM_SET_MP_STATE handler.

Fixes: 4b9852f4 ("KVM: x86: Fix INIT signal handling in various CPU states")
Reported-by: NSean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: NMihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 4b9852f4 ("KVM: x86: Fix INIT signal handling in various CPU states")
fixed KVM to also latch pending LAPIC INIT event when vCPU is in VMX
operation.

However, current API of KVM_SET_VCPU_EVENTS defines this field as
part of SMM state and only set pending LAPIC INIT event if vCPU is
specified to be in SMM mode (events->smi.smm is set).

Change KVM_SET_VCPU_EVENTS handler to set pending LAPIC INIT event
by latched_init field regardless of if vCPU is in SMM mode or not.

Fixes: 4b9852f4 ("KVM: x86: Fix INIT signal handling in various CPU states")
Reviewed-by: NMihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's enough to check the value and issue the direct call.

After this commit is applied, here the most common retpolines executed
under a high resolution timer workload in the guest on a VMX host:

[..]
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 267
@[]: 2256
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    __kvm_wait_lapic_expire+284
    vmx_vcpu_run.part.97+1091
    vcpu_enter_guest+377
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 2390
@[]: 33410

@total: 315707

Note the highest hit above is __delay so probably not worth optimizing
even if it would be more frequent than 2k hits per sec.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's enough to check the exit value and issue a direct call to avoid
the retpoline for all the common vmexit reasons.

After this commit is applied, here the most common retpolines executed
under a high resolution timer workload in the guest on a SVM host:

[..]
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    ktime_get_update_offsets_now+70
    hrtimer_interrupt+131
    smp_apic_timer_interrupt+106
    apic_timer_interrupt+15
    start_sw_timer+359
    restart_apic_timer+85
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 1940
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_r12+33
    force_qs_rnp+217
    rcu_gp_kthread+1270
    kthread+268
    ret_from_fork+34
]: 4644
@[]: 25095
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    lapic_next_event+28
    clockevents_program_event+148
    hrtimer_start_range_ns+528
    start_sw_timer+356
    restart_apic_timer+85
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 41474
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    clockevents_program_event+148
    hrtimer_start_range_ns+528
    start_sw_timer+356
    restart_apic_timer+85
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 41474
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    ktime_get+58
    clockevents_program_event+84
    hrtimer_start_range_ns+528
    start_sw_timer+356
    restart_apic_timer+85
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 41887
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    lapic_next_event+28
    clockevents_program_event+148
    hrtimer_try_to_cancel+168
    hrtimer_cancel+21
    kvm_set_lapic_tscdeadline_msr+43
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 42723
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    clockevents_program_event+148
    hrtimer_try_to_cancel+168
    hrtimer_cancel+21
    kvm_set_lapic_tscdeadline_msr+43
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 42766
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    ktime_get+58
    clockevents_program_event+84
    hrtimer_try_to_cancel+168
    hrtimer_cancel+21
    kvm_set_lapic_tscdeadline_msr+43
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 42848
@[
    trace_retpoline+1
    __trace_retpoline+30
    __x86_indirect_thunk_rax+33
    ktime_get+58
    start_sw_timer+279
    restart_apic_timer+85
    kvm_set_msr_common+1497
    msr_interception+142
    vcpu_enter_guest+684
    kvm_arch_vcpu_ioctl_run+261
    kvm_vcpu_ioctl+559
    do_vfs_ioctl+164
    ksys_ioctl+96
    __x64_sys_ioctl+22
    do_syscall_64+89
    entry_SYSCALL_64_after_hwframe+68
]: 499845

@total: 1780243

SVM has no TSC based programmable preemption timer so it is invoking
ktime_get() frequently.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's enough to check the exit value and issue a direct call to avoid
the retpoline for all the common vmexit reasons.

Of course CONFIG_RETPOLINE already forbids gcc to use indirect jumps
while compiling all switch() statements, however switch() would still
allow the compiler to bisect the case value. It's more efficient to
prioritize the most frequent vmexits instead.

The halt may be slow paths from the point of the guest, but not
necessarily so from the point of the host if the host runs at full CPU
capacity and no host CPU is ever left idle.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Eliminate wasteful call/ret non RETPOLINE case and unnecessary fentry
dynamic tracing hooking points.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The odd out jump label is really not needed. Get rid of
it by return true directly while r < 0 as suggested by
Paolo. This further lead to var changed being unused.
Remove it too.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>