- 03 9月, 2009 20 次提交
-
-
由 Eric Dumazet 提交于
Remove a debugging aid I accidently left in previous 'cleanup' patch Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
vlan_dev_hard_start_xmit() & vlan_dev_hwaccel_hard_start_xmit() select txqueue number 0, instead of using index provided by skb_get_queue_mapping(). This is not correct after commit 2e59af3d [vlan: multiqueue vlan device] because txq->tx_packets & txq->tx_bytes changes are performed on a single location, and not the right locking. Fix is to take the appropriate struct netdev_queue pointer Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Pure style cleanup patch before surgery :) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karl Hiramoto 提交于
atm/br2684: netif_stop_queue() when atm device busy and netif_wake_queue() when we can send packets again. This patch removes the call to dev_kfree_skb() when the atm device is busy. Calling dev_kfree_skb() causes heavy packet loss then the device is under heavy load, the more correct behavior should be to stop the upper layers, then when the lower device can queue packets again wake the upper layers. Signed-off-by: NKarl Hiramoto <karl@hiramoto.org> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Uwe Kleine-König 提交于
fec_enet_mii, fec_enet_rx and fec_enet_tx are both only called by fec_enet_interrupt in interrupt context. So they must not use spin_lock_irq/spin_unlock_irq. This fixes: WARNING: at kernel/lockdep.c:2140 trace_hardirqs_on_caller+0x130/0x194() ... Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Patrick McHardy <kaber@trash.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Matt Waddel <Matt.Waddel@freescale.com> Cc: netdev@vger.kernel.org Cc: Tim Sander <tim01@vlsi.informatik.tu-darmstadt.de> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Uwe Kleine-König 提交于
mii_discover_phy is only called by fec_enet_mii (via mip->mii_func). So &fep->mii_lock is already held and mii_discover_phy must not call mii_queue which locks &fep->mii_lock, too. This was noticed by lockdep: ============================================= [ INFO: possible recursive locking detected ] 2.6.31-rc8-00038-g37d0892c #109 --------------------------------------------- swapper/1 is trying to acquire lock: (&fep->mii_lock){-.....}, at: [<c01569f8>] mii_queue+0x2c/0xcc but task is already holding lock: (&fep->mii_lock){-.....}, at: [<c0156328>] fec_enet_interrupt+0x78/0x460 other info that might help us debug this: 2 locks held by swapper/1: #0: (rtnl_mutex){+.+.+.}, at: [<c0183534>] rtnl_lock+0x18/0x20 #1: (&fep->mii_lock){-.....}, at: [<c0156328>] fec_enet_interrupt+0x78/0x460 stack backtrace: Backtrace: [<c00226fc>] (dump_backtrace+0x0/0x108) from [<c01eac14>] (dump_stack+0x18/0x1c) r6:c781d118 r5:c03e41d8 r4:00000001 [<c01eabfc>] (dump_stack+0x0/0x1c) from [<c005bae4>] (__lock_acquire+0x1a20/0x1a88) [<c005a0c4>] (__lock_acquire+0x0/0x1a88) from [<c005bbac>] (lock_acquire+0x60/0x74) [<c005bb4c>] (lock_acquire+0x0/0x74) from [<c01edda8>] (_spin_lock_irqsave+0x54/0x68) r7:60000093 r6:c01569f8 r5:c785e468 r4:00000000 [<c01edd54>] (_spin_lock_irqsave+0x0/0x68) from [<c01569f8>] (mii_queue+0x2c/0xcc) r7:c785e468 r6:c0156b24 r5:600a0000 r4:c785e000 [<c01569cc>] (mii_queue+0x0/0xcc) from [<c0156b78>] (mii_discover_phy+0x54/0xa8) r8:00000002 r7:00000032 r6:c785e000 r5:c785e360 r4:c785e000 [<c0156b24>] (mii_discover_phy+0x0/0xa8) from [<c0156354>] (fec_enet_interrupt+0xa4/0x460) r5:c785e360 r4:c077a170 [<c01562b0>] (fec_enet_interrupt+0x0/0x460) from [<c0066674>] (handle_IRQ_event+0x48/0x120) [<c006662c>] (handle_IRQ_event+0x0/0x120) from [<c0068438>] (handle_level_irq+0x94/0x11c) ... Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Patrick McHardy <kaber@trash.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Matt Waddel <Matt.Waddel@freescale.com> Cc: netdev@vger.kernel.org Cc: Tim Sander <tim01@vlsi.informatik.tu-darmstadt.de> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
The bpq ether driver is modifying the data art of the skb by first dropping the KISS byte (a command byte for the radio) then prepending the length + 4 of the remaining AX.25 packet to be transmitted as a little endian 16-bit number. If the high byte of the length has a different value than the dropped KISS byte users of clones of the skb may observe this as corruption. This was observed with by running listen(8) -a which uses a packet socket which clones transmit packets. The corruption will then typically be displayed for as a KISS "TX Delay" command for AX.25 packets in the range of 252..508 bytes or any other KISS command for yet larger packets. Fixed by using skb_cow to create a private copy should the skb be cloned. Using skb_cow also allows us to cleanup the old logic to ensure sufficient headroom in the skb. While at it, replace a return of 0 from bpq_xmit with the proper constant NETDEV_TX_OK which is now being used everywhere else in this function. Affected: all 2.2, 2.4 and 2.6 kernels. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Reported-by: NJann Traschewski <jann@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 roel kluin 提交于
Request_irq() may fail in different ways, handle accordingly. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wu Fengguang 提交于
This fixed a lockdep warning which appeared when doing stress memory tests over NFS: inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. page reclaim => nfs_writepage => tcp_sendmsg => lock sk_lock mount_root => nfs_root_data => tcp_close => lock sk_lock => tcp_send_fin => alloc_skb_fclone => page reclaim David raised a concern that if the allocation fails in tcp_send_fin(), and it's GFP_ATOMIC, we are going to yield() (which sleeps) and loop endlessly waiting for the allocation to succeed. But fact is, the original GFP_KERNEL also sleeps. GFP_ATOMIC+yield() looks weird, but it is no worse the implicit sleep inside GFP_KERNEL. Both could loop endlessly under memory pressure. CC: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> CC: David S. Miller <davem@davemloft.net> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
This patch adds support to flash a firmware image to a device using ethtool. The driver gets the filename of the firmware image and flashes the image using the request firmware path. The region "on the chip" to be flashed can be specified by an option. It is upto the device driver to enumerate the region number passed by ethtool, to the region to be flashed. The default behavior is to flash all the regions on the chip. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NNeil Horman <nhorman@txudriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Christoph Lameter pointed out that packet drops at qdisc level where not accounted in SNMP counters. Only if application sets IP_RECVERR, drops are reported to user (-ENOBUFS errors) and SNMP counters updated. IP_RECVERR is used to enable extended reliable error message passing, but these are not needed to update system wide SNMP stats. This patch changes things a bit to allow SNMP counters to be updated, regardless of IP_RECVERR being set or not on the socket. Example after an UDP tx flood # netstat -s ... IP: 1487048 outgoing packets dropped ... Udp: ... SndbufErrors: 1487048 send() syscalls, do however still return an OK status, to not break applications. Note : send() manual page explicitly says for -ENOBUFS error : "The output queue for a network interface was full. This generally indicates that the interface has stopped sending, but may be caused by transient congestion. (Normally, this does not occur in Linux. Packets are just silently dropped when a device queue overflows.) " This is not true for IP_RECVERR enabled sockets : a send() syscall that hit a qdisc drop returns an ENOBUFS error. Many thanks to Christoph, David, and last but not least, Alexey ! Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
vlan devices are currently not multi-queue capable. We can do that with a new rtnl_link_ops method, get_tx_queues(), called from rtnl_create_link() This new method gets num_tx_queues/real_num_tx_queues from real device. register_vlan_device() is also handled. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
It was recently pointed out to me that the last_rx field of the net_device structure wasn't updated regularly. In fact only the bonding driver really uses it currently. Since the drop_monitor code relies on the last_rx field to detect drops on recevie in hardware, We need to find a more reliable way to rate limit our drop checks (so that we don't check for drops on every frame recevied, which would be inefficient. This patch makes a last_rx timestamp that is private to the drop monitor code and is updated for every device that we track. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivek Natarajan 提交于
Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
The find_ie() function uses a size_t for the len parameter, and directly uses len as a loop variable. If any received packets are malformed, it is possible for the decrease of len to overflow, and since the result is unsigned, the loop will not terminate. Change it to a signed int so the loop conditional works for negative values. This fixes the following soft lockup: [38573.102007] BUG: soft lockup - CPU#0 stuck for 61s! [phy0:2230] [38573.102007] Modules linked in: aes_i586 aes_generic fuse af_packet ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state iptable_filter ip_tables x_tables acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod kvm_intel kvm uinput i915 arc4 ecb drm snd_hda_codec_idt ath5k snd_hda_intel hid_apple mac80211 usbhid appletouch snd_hda_codec snd_pcm ath cfg80211 snd_timer i2c_algo_bit ohci1394 video snd processor ieee1394 rfkill ehci_hcd sg sky2 backlight snd_page_alloc uhci_hcd joydev output ac thermal button battery sr_mod applesmc cdrom input_polldev evdev unix [last unloaded: scsi_wait_scan] [38573.102007] irq event stamp: 2547724535 [38573.102007] hardirqs last enabled at (2547724534): [<c1002ffc>] restore_all_notrace+0x0/0x18 [38573.102007] hardirqs last disabled at (2547724535): [<c10038f4>] apic_timer_interrupt+0x28/0x34 [38573.102007] softirqs last enabled at (92950144): [<c103ab48>] __do_softirq+0x108/0x210 [38573.102007] softirqs last disabled at (92950274): [<c1348e74>] _spin_lock_bh+0x14/0x80 [38573.102007] [38573.102007] Pid: 2230, comm: phy0 Tainted: G W (2.6.31-rc7-wl #8) MacBook1,1 [38573.102007] EIP: 0060:[<f8ea2d50>] EFLAGS: 00010292 CPU: 0 [38573.102007] EIP is at cmp_ies+0x30/0x180 [cfg80211] [38573.102007] EAX: 00000082 EBX: 00000000 ECX: ffffffc1 EDX: d8efd014 [38573.102007] ESI: ffffff7c EDI: 0000004d EBP: eee2dc50 ESP: eee2dc3c [38573.102007] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [38573.102007] CR0: 8005003b CR2: d8efd014 CR3: 01694000 CR4: 000026d0 [38573.102007] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [38573.102007] DR6: ffff0ff0 DR7: 00000400 [38573.102007] Call Trace: [38573.102007] [<f8ea2f8d>] cmp_bss+0xed/0x100 [cfg80211] [38573.102007] [<f8ea33e4>] cfg80211_bss_update+0x84/0x410 [cfg80211] [38573.102007] [<f8ea3884>] cfg80211_inform_bss_frame+0x114/0x180 [cfg80211] [38573.102007] [<f97255ff>] ieee80211_bss_info_update+0x4f/0x180 [mac80211] [38573.102007] [<f972b118>] ieee80211_rx_bss_info+0x88/0xf0 [mac80211] [38573.102007] [<f9739297>] ? ieee802_11_parse_elems+0x27/0x30 [mac80211] [38573.102007] [<f972b224>] ieee80211_rx_mgmt_probe_resp+0xa4/0x1c0 [mac80211] [38573.102007] [<f972bc59>] ieee80211_sta_rx_queued_mgmt+0x919/0xc50 [mac80211] [38573.102007] [<c1009707>] ? sched_clock+0x27/0xa0 [38573.102007] [<c1009707>] ? sched_clock+0x27/0xa0 [38573.102007] [<c105ffd0>] ? mark_held_locks+0x60/0x80 [38573.102007] [<c1348be5>] ? _spin_unlock_irqrestore+0x55/0x70 [38573.102007] [<c134baa5>] ? sub_preempt_count+0x85/0xc0 [38573.102007] [<c1348bce>] ? _spin_unlock_irqrestore+0x3e/0x70 [38573.102007] [<c12c1c0f>] ? skb_dequeue+0x4f/0x70 [38573.102007] [<f972c021>] ieee80211_sta_work+0x91/0xb80 [mac80211] [38573.102007] [<c1009707>] ? sched_clock+0x27/0xa0 [38573.102007] [<c134baa5>] ? sub_preempt_count+0x85/0xc0 [38573.102007] [<c10479af>] worker_thread+0x18f/0x320 [38573.102007] [<c104794e>] ? worker_thread+0x12e/0x320 [38573.102007] [<c1348be5>] ? _spin_unlock_irqrestore+0x55/0x70 [38573.102007] [<f972bf90>] ? ieee80211_sta_work+0x0/0xb80 [mac80211] [38573.102007] [<c104cbb0>] ? autoremove_wake_function+0x0/0x50 [38573.102007] [<c1047820>] ? worker_thread+0x0/0x320 [38573.102007] [<c104c854>] kthread+0x84/0x90 [38573.102007] [<c104c7d0>] ? kthread+0x0/0x90 [38573.102007] [<c1003ab7>] kernel_thread_helper+0x7/0x10 Cc: stable@kernel.org Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We can just display this upon enabling mac80211 with an 'if MAC80211 != n' check. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Refer to the wireless wiki for more information. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Change it to a menuconfig to give it some documentation, to refer users to our wireless wiki for extra resources and documentation. It seems our wiki is still obscure to some. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 02 9月, 2009 20 次提交
-
-
由 Stephen Hemminger 提交于
All instances of file_operations should be const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The function block inet_connect_sock_af_ops contains no data make it constant. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
No need to put ethtool_ops in data, they should be const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch updates the tg3 version to 3.102. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The 5717 is a dual port chip that has a shared MDIO bus design. While it is impossible for one function to interface with the wrong phy, that function still needs to know which MDIO bus address to use when interfacing with its own phy. This patch adds code to determine which MDIO bus address to use. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds NVRAM detection routines for the 5717. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds the 5717 asic rev. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
When RSS is enabled, the status block format changes slightly. The "rx_jumbo_consumer", "reserved", and "rx_mini_consumer" members get mapped to the other three rx return ring producer indexes. This patch introduces a new per-interrupt member which identifies which location in the status block a particular vector should look for return ring updates. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
When multivector RSS is enabled, the first interrupt vector is only used to report link interrupts and error conditions. This patch changes the code so that rx and tx ring resources are not allocated for this vector. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds code needed to enable RSS. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds code to tune the coalescing parameters for the other msix vectors. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds code to enable and disable the rest of the NAPI instances. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch exposes the additional transmit rings to the kernel and makes the necessary modifications to transmit, open, and close paths. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch fixes up two spots that need attention now that msix support has been added. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds code to assign status block, tx producer ring and rx return ring resources needed for the other interrupt vectors. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The 5717 assigns mailbox locations to interrupt vectors in a rather non-intuitive way. (Much of the complexity stems from legacy compatibility issues.) This patch implements the assignment scheme. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds MSI-X support. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds code to support multiple interrupt vectors around the kernel's interrupt API. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-