The function names made sense up to the point where the watchdog
(re)configuration was unified to use softlockup_reconfigure_threads() for
all configuration purposes. But that includes scenarios which solely
configure the nmi watchdog.

Rename softlockup_reconfigure_threads() and softlockup_init_threads() so
the function names match the functionality.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>

The rework of the core hotplug code triggers the WARN_ON in start_wd_cpu()
on powerpc because it is called multiple times for the boot CPU.

The first call is via:

  start_wd_on_cpu+0x80/0x2f0
  watchdog_nmi_reconfigure+0x124/0x170
  softlockup_reconfigure_threads+0x110/0x130
  lockup_detector_init+0xbc/0xe0
  kernel_init_freeable+0x18c/0x37c
  kernel_init+0x2c/0x160
  ret_from_kernel_thread+0x5c/0xbc

And then again via the CPU hotplug registration:

  start_wd_on_cpu+0x80/0x2f0
  cpuhp_invoke_callback+0x194/0x620
  cpuhp_thread_fun+0x7c/0x1b0
  smpboot_thread_fn+0x290/0x2a0
  kthread+0x168/0x1b0
  ret_from_kernel_thread+0x5c/0xbc

This can be avoided by setting up the cpu hotplug state with nocalls and
move the initialization to the watchdog_nmi_probe() function. That
initializes the hotplug callbacks without invoking the callback and the
following core initialization function then configures the watchdog for the
online CPUs (in this case CPU0) via softlockup_reconfigure_threads().
Reported-and-tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org

Instead of dropping the cpu hotplug lock after stopping NMI watchdog and
threads and reaquiring for restart, the code and the protection rules
become more obvious when holding cpu hotplug lock across the full
reconfiguration.
Suggested-by: NLinus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710022105570.2114@nanos

The recent cleanup of the watchdog code split watchdog_nmi_reconfigure()
into two stages. One to stop the NMI and one to restart it after
reconfiguration. That was done by adding a boolean 'run' argument to the
code, which is functionally correct but not necessarily a piece of art.

Replace it by two explicit functions: watchdog_nmi_stop() and
watchdog_nmi_start().

Fixes: 6592ad2f ("watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage")
Requested-by: NLinus 'Nursing his pet-peeve' Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: NThomas 'Mopping up garbage' Gleixner <tglx@linutronix.de>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710021957480.2114@nanos

Trivial fix to spelling mistake in pr_info message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Babu Moger <babu.moger@oracle.com>
Link: https://lkml.kernel.org/r/20170926093603.7756-1-colin.king@canonical.com

for_each_cpu() unintuitively reports CPU0 as set independend of the actual
cpumask content on UP kernels. That leads to a NULL pointer dereference
when the cleanup function is invoked and there is no event to clean up.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

All watchdog thread related functions are delegated to the smpboot thread
infrastructure, which handles serialization against CPU hotplug correctly.

The sysctl interface is completely decoupled from anything which requires
CPU hotplug protection.

No need to protect the sysctl writes against cpu hotplug anymore. Remove it
and add the now required protection to the powerpc arch_nmi_watchdog
implementation.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170912194148.418497420@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that all functionality is properly serialized against CPU hotplug,
remove the extra per cpu storage which holds the disabled events for
cleanup. The core makes sure that cleanup happens before new events are
created.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194148.340708074@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Get rid of the hodgepodge which tries to be smart about perf being
unavailable and error printout rate limiting.

That's all not required simply because this is never invoked when the perf
NMI watchdog is not functional.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194148.259651788@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

watchdog_nmi_enable() is an unparseable mess, Provide a clean perf specific
implementation, which will be used when the existing setup/teardown mess is
replaced.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194148.180215498@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Use the init time detection of the perf NMI watchdog to determine whether
the perf NMI watchdog is functional. If not disable it permanentely. It
won't come back magically at runtime.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194148.099799541@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The watchdog tries to create perf events even after it figured out that
perf is not functional or the requested event is not supported.

That's braindead as this can be done once at init time and if not supported
the NMI watchdog can be turned off unconditonally.

Implement the perf hardlockup detector functionality for that. This creates
a new event create function, which will replace the unholy mess of the
existing one in later patches.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194148.019090547@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Letting user space poke directly at variables which are used at run time is
stupid and causes a lot of race conditions and other issues.

Seperate the user variables and on change invoke the reconfiguration, which
then stops the watchdogs, reevaluates the new user value and restarts the
watchdogs with the new parameters.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.939985640@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Both the perf reconfiguration and the powerpc watchdog_nmi_reconfigure()
need to be done in two steps.

     1) Stop all NMIs
     2) Read the new parameters and start NMIs

Right now watchdog_nmi_reconfigure() is a combination of both. To allow a
clean reconfiguration add a 'run' argument and split the functionality in
powerpc.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170912194147.862865570@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Reflect that these variables are user interface related and remove the
whitespace damage in the sysctl table while at it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.783210221@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The sysctl of the nmi_watchdog file prevents writes by setting:

    min = max = 0

if none of the users is enabled. That involves ifdeffery and is competely
non obvious.

If none of the facilities is enabeld, then the file can simply be made read
only. Move the ifdeffery into the header and use a constant for file
permissions.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.706073616@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Having the same #ifdef in various places does not make it more
readable. Collect stuff into one place.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.627096864@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Use a single function to update sysctl changes. This is not a high
frequency user space interface and it's root only.

Preparatory patch to cleanup the sysctl variable handling.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.549114957@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The lockup detector reconfiguration tears down all watchdog threads when
the watchdog is disabled and sets them up again when its enabled.

That's a pointless exercise. The watchdog threads are not consuming an
insane amount of resources, so it's enough to set them up at init time and
keep them in parked position when the watchdog is disabled and unpark them
when it is reenabled. The smpboot thread infrastructure takes care of
keeping the force parked threads in place even across cpu hotplug.

Aside of that the code implements the park/unpark facility of smp hotplug
threads on its own, which is even more pointless. We have functionality in
the smpboot thread code to do so.

Use the new thread management functions and get rid of the unholy mess.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.470370113@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The lockup detector reconfiguration tears down all watchdog threads when
the watchdog is disabled and sets them up again when its enabled.

That's a pointless exercise. The watchdog threads are not consuming an
insane amount of resources, so it's enough to set them up at init time and
keep them in parked position when the watchdog is disabled and unpark them
when it is reenabled. The smpboot thread infrastructure takes care of
keeping the force parked threads in place even across cpu hotplug.

Another horrible mechanism are the open coded park/unpark loops which are
used for reconfiguration of the watchdog. The smpboot infrastructure allows
exactly the same via smpboot_update_cpumask_thread_percpu(), which is cpu
hotplug safe. Using that instead of the open coded loops allows to get rid
of the hotplug locking mess in the watchdog code.

Implement a clean infrastructure which allows to replace the open coded
nonsense.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.377182587@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

smpboot_update_cpumask_threads_percpu() allocates a temporary cpumask at
runtime. This is suboptimal because the call site needs more code size for
proper error handling than a statically allocated temporary mask requires
data size.

Add static temporary cpumask. The function is globaly serialized, so no
further protection required.

Remove the half baken error handling in the watchdog code and get rid of
the export as there are no in tree modular users of that function.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.297288838@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Split the write part of the cpumask proc handler out into a separate helper
to avoid deep indentation. This also reduces the patch complexity in the
following cleanups.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.218075991@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The #ifdef maze in this file is horrible, group stuff at least a bit so one
can figure out what belongs to what.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.139629546@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Having stub functions which take a full page is not helping the
readablility of code.

Condense them and move the doubled #ifdef variant into the SYSFS section.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.045545271@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  b94f5118 ("kernel/watchdog: prevent false hardlockup on overloaded system")

tries to fix the following issue:

proc_write()
   set_sample_period()    <--- New sample period becoms visible
			  <----- Broken starts
   proc_watchdog_update()
     watchdog_enable_all_cpus()		watchdog_hrtimer_fn()
     update_watchdog_all_cpus()		   restart_timer(sample_period)
        watchdog_park_threads()

					thread->park()
					  disable_nmi()
			  <----- Broken ends

The reason why this is broken is that the update of the watchdog threshold
becomes immediately effective and visible for the hrtimer function which
uses that value to rearm the timer. But the NMI/perf side still uses the
old value up to the point where it is disabled. If the rate has been
lowered then the NMI can run fast enough to 'detect' a hard lockup because
the timer has not fired due to the longer period.

The patch 'fixed' this by adding a variable:

proc_write()
   set_sample_period()
					<----- Broken starts
   proc_watchdog_update()
     watchdog_enable_all_cpus()		watchdog_hrtimer_fn()
     update_watchdog_all_cpus()		   restart_timer(sample_period)
         watchdog_park_threads()
	  park_in_progress = 1
					<----- Broken ends
				        nmi_watchdog()
					  if (park_in_progress)
					     return;

The only effect of this variable was to make the window where the breakage
can hit small enough that it was not longer observable in testing. From a
correctness point of view it is a pointless bandaid which merily papers
over the root cause: the unsychronized update of the variable.

Looking deeper into the related code pathes unearthed similar problems in
the watchdog_start()/stop() functions.

 watchdog_start()
	perf_nmi_event_start()
	hrtimer_start()

 watchdog_stop()
	hrtimer_cancel()
	perf_nmi_event_stop()

In both cases the call order is wrong because if the tasks gets preempted
or the VM gets scheduled out long enough after the first call, then there is
a chance that the next NMI will see a stale hrtimer interrupt count and
trigger a false positive hard lockup splat.

Get rid of park_in_progress so the code can be gradually deobfuscated and
pruned from several layers of duct tape papering over the root cause,
which has been either ignored or not understood at all.

Once this is removed the underlying problem will be fixed by rewriting the
proc interface to do a proper synchronized update.

Address the start/stop() ordering problem as well by reverting the call
order, so this part is at least correct now.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1709052038270.2393@nanosSigned-off-by: NIngo Molnar <mingo@kernel.org>

The following deadlock is possible in the watchdog hotplug code:

  cpus_write_lock()
    ...
      takedown_cpu()
        smpboot_park_threads()
          smpboot_park_thread()
            kthread_park()
              ->park() := watchdog_disable()
                watchdog_nmi_disable()
                  perf_event_release_kernel();
                    put_event()
                      _free_event()
                        ->destroy() := hw_perf_event_destroy()
                          x86_release_hardware()
                            release_ds_buffers()
                              get_online_cpus()

when a per cpu watchdog perf event is destroyed which drops the last
reference to the PMU hardware. The cleanup code there invokes
get_online_cpus() which instantly deadlocks because the hotplug percpu
rwsem is write locked.

To solve this add a deferring mechanism:

  cpus_write_lock()
			   kthread_park()
			    watchdog_nmi_disable(deferred)
			      perf_event_disable(event);
			      move_event_to_deferred(event);
			   ....
  cpus_write_unlock()
  cleaup_deferred_events()
    perf_event_release_kernel()

This is still properly serialized against concurrent hotplug via the
cpu_add_remove_lock, which is held by the task which initiated the hotplug
event.

This is also used to handle event destruction when the watchdog threads are
parked via other mechanisms than CPU hotplug.
Analyzed-by: NPeter Zijlstra <peterz@infradead.org>
Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.884469246@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The self disabling feature is broken vs. CPU hotplug locking:

CPU 0			   CPU 1
cpus_write_lock();
 cpu_up(1)
   wait_for_completion()
			   ....
			   unpark_watchdog()
			   ->unpark()
			     perf_event_create() <- fails
			       watchdog_enable &= ~NMI_WATCHDOG;
			   ....
cpus_write_unlock();
			   CPU 2
cpus_write_lock()
 cpu_down(2)
   wait_for_completion()
			   wakeup(watchdog);
			     watchdog()
			     if (!(watchdog_enable & NMI_WATCHDOG))
				watchdog_nmi_disable()
				  perf_event_disable()
				  ....
				  cpus_read_lock();

			   stop_smpboot_threads()
			     park_watchdog();
			       wait_for_completion(watchdog->parked);

Result: End of hotplug and instantaneous full lockup of the machine.

There is a similar problem with disabling the watchdog via the user space
interface as the sysctl function fiddles with watchdog_enable directly.

It's very debatable whether this is required at all. If the watchdog works
nicely on N CPUs and it fails to enable on the N + 1 CPU either during
hotplug or because the user space interface disabled it via sysctl cpumask
and then some perf user grabbed the counter which is then unavailable for
the watchdog when the sysctl cpumask gets changed back.

There is no real justification for this.

One of the reasons WHY this is done is the utter stupidity of the init code
of the perf NMI watchdog. Instead of checking upfront at boot whether PERF
is available and functional at all, it just does this check at run time
over and over when user space fiddles with the sysctl. That's broken beyond
repair along with the idiotic error code dependent warn level printks and
the even more silly printk rate limiting.

If the init code checks whether perf works at boot time, then this mess can
be more or less avoided completely. Perf does not come magically into life
at runtime. Brain usage while coding is overrated.

Remove the cruft and add a temporary safe guard which gets removed later.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.806708429@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The function is only used by the KVM init code. Mark it __init to prevent
creative abuse.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.727134632@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Following patches will use the mutex for other purposes as well. Rename it
as it is not longer a proc specific thing.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.647714850@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The watchdog proc interface causes extensive recursive locking of the CPU
hotplug percpu rwsem, which is deadlock prone.

Replace the get/put_online_cpus() pairs with cpu_hotplug_disable()/enable()
calls for now. Later patches will remove that requirement completely.
Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.568079057@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

This interface has several issues:

 - It's causing recursive locking of the hotplug lock.

 - It's complete overkill to teardown all threads and then recreate them

The same can be achieved with the simple hardlockup_detector_perf_stop /
restart() interfaces. The abuse from the busy looping poweroff() loop of
PARISC has been solved as well.

Remove the cruft.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.487537732@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The broken lockup_detector_suspend/resume() interface is going away. Use
the new lockup_detector_soft_poweroff() interface to stop the watchdog from
the busy looping power off routine.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: linux-parisc@vger.kernel.org
Link: http://lkml.kernel.org/r/20170912194146.407385557@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

PARISC has a a busy looping power off routine. If the watchdog is enabled
the watchdog timer will still fire, but the thread is not running, which
causes the softlockup watchdog to trigger.

Provide a interface which allows to turn the watchdog off.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: linux-parisc@vger.kernel.org
Link: http://lkml.kernel.org/r/20170912194146.327343752@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The lockup_detector_suspend/resume() interface is broken in several ways
especially as it results in recursive locking of the CPU hotplug lock.

Use the new stop/restart interface in the perf NMI watchdog to temporarily
disable and reenable the already active watchdog events. That's enough to
handle it.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.247141871@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Provide an interface to stop and restart perf NMI watchdog events on all
CPUs. This is only usable during init and especially for handling the perf
HT bug on Intel machines. It's safe to use it this way as nothing can
start/stop the NMI watchdog in parallel.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.167649596@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull perf fixes from Ingo Molnar:
 "A handful of tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf stat: Wait for the correct child
  perf tools: Support running perf binaries with a dash in their name
  perf config: Check not only section->from_system_config but also item's
  perf ui progress: Fix progress update
  perf ui progress: Make sure we always define step value
  perf tools: Open perf.data with O_CLOEXEC flag
  tools lib api: Fix make DEBUG=1 build
  perf tests: Fix compile when libunwind's unwind.h is available
  tools include linux: Guard against redefinition of some macros

Pull scheduler fixes from Ingo Molnar:
 "Three CPU hotplug related fixes and a debugging improvement"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Add debugfs knob for "sched_debug"
  sched/core: WARN() when migrating to an offline CPU
  sched/fair: Plug hole between hotplug and active_load_balance()
  sched/fair: Avoid newidle balance for !active CPUs

Pull x86 fixes from Ingo Molnar:
 "The main changes are the PCID fixes from Andy, but there's also two
  hyperv fixes and two paravirt updates"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hyper-v: Remove duplicated HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED definition
  x86/hyper-V: Allocate the IDT entry early in boot
  paravirt: Switch maintainer
  x86/paravirt: Remove no longer used paravirt functions
  x86/mm/64: Initialize CR4.PCIDE early
  x86/hibernate/64: Mask off CR3's PCID bits in the saved CR3
  x86/mm: Get rid of VM_BUG_ON in switch_tlb_irqs_off()

Pull OpenRISC fixlet from Stafford Horne:
 "Fix warning for upcoming work to remove linux/vmalloc.h from
  asm-generic/io.h"

* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
  openrisc: add forward declaration for struct vm_area_struct

Pull modules updates from Jessica Yu:
 "Summary of modules changes for the 4.14 merge window:

   - minor code cleanups and fixes

   - modpost: avoid building modules that have names that exceed the
     size of the name field in struct module"

* tag 'modules-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Remove const attribute from alias for MODULE_DEVICE_TABLE
  module: fix ddebug_remove_module()
  modpost: abort if module name is too long