Once the defect 7374 is patched, there is no reason the keep reading the
idx scratch register.

Cache the content of the scratch idx register on device flag.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Do not duplicate the code for the else branch of the condition.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We can use the same function for both families of chips and also remove
the ep_stop_dma() function.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

irqs_superspeed calls ep_stall instead of set/clear_halt, due to a
workaround for SS seqnum. Create a function with the workaround and
call set/clear_halt instead.

This way we can compare the code of super/normal speed and it is easier
to follow the code.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Field is_halt is never used by any function.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

ep_stdrsp was only called by handle_stat0_irqs_superspeed and with
always the same flags.

Remove the function and replace the call by the code inside the
function, since it is very simple once the dead code is removed.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

restart_dma is not used before it is declaration. Therefore we can
remove this definition.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Remove dma_started field from net2280_ep structure, since it is not used
by any function.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

use_dma parameter was designed to enable the dma on the chip. It was
enabled by default.

It comes from the time when the dma was not reliable. Now it has been
working ok in production.

This patch removes this parameter.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Parameter use_msi was used to enable msi irq on usb338x chips, it was
enabled by default.

There is no reason to prefer non-msi irq on usb338x, and it falls back
to non msi on error.

Therefore remove this option.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch removes the full_speed parameter used force full-speed
operation.

It was designed exclusively for testing purposes, and there is no
reason to maintain this in a production kernel.

Reverts: 2f076077Suggested-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

use_dma_chaining module parameter was designed to avoid creating one irq
per package on a group of packages (with the help of the driver's flag
no_interrupt).

Unfortunately, when this parameter is enabled, the driver fails to work
on both net2280 and 3380 chips.

This patch removes this parameter, which was disabled by default.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

There is a typo ("prove" instead of "probe") in the error message printed when
the platform initialization fails. Replace that word with more fitting "init".
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

fixups for incorrect use of DECLARE_COMPLETION. see also commit
6e9a4738 ("completions: lockdep annotate on stack completions")

patch is against 3.18.0 linux-next

This was only code reviewed and compile tested
Signed-off-by: NNicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Update this according to USB Audio Class 1.0 spec. This fixes the Windows 7
detection issue.

Cc: Rafael Brune <mail@rbrune.de>
Signed-off-by: NXuebing Wang <xbing6@gmail.com>
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
(Fixed some code style issues)
Tested-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

UAC1 forget to do it.
Signed-off-by: NXuebing Wang <xbing6@gmail.com>
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

"ep" isn't NULL here, and static checkers complain because we
dereferenced it on the previous line.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We already know what "value" is, so there is no need to check.  It
puzzles static checkers to have the unneeded condition.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Get PHY parameters from devicetree and power off usb PHY during
system suspend.
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NYunzhi Li <lyz@rock-chips.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add support for using the uvc function as a component of USB gadgets composed
with configfs.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

If the caller of uvc_alloc() does not provide enough
descriptors, binding the function should fail, so appropriate
code is returned from uvc_copy_descriptors().

uvc_function_bind() is modified accordingly to account for possible
errors from uvc_copy_descriptors().
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

When configfs is integrated, CONFIGFS_ATTR_STRUCT and CONFIGFS_ATTR_OPS
macros should be used, but the latter expects that tere is a to_f_uvc_opts
function accepting a config_item, whereas the macro being changed
can be applied to a different type of argument.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

usbhsc_drvcllbck_notify_hotplug() always returns 0, so it's rather pointless to
store and check its result for being < 0.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

A maximum value which fits in 16 bits, unsigned, is 65535.
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This field was introduced but never used. So, remove it.
Signed-off-by: NAmit Virdi <amit.virdi@st.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

dwc3_gadget_init_hw_endpoints calls dwc3_alloc_trb_pool only if epnum is not
equal to 0 or 1. Hence, rechecking it in the called function is redundant.
Signed-off-by: NAmit Virdi <amit.virdi@st.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Fixed 3 typos in comments
Signed-off-by: NMickael Maison <mickael.maison@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Removes some functions that are not used anywhere:
s3c2410_udc_clear_ep_state() s3c2410_udc_set_ep0_sse_out()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Fixed a typo in comments
Signed-off-by: NMickael Maison <mickael.maison@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This is a static checker fix.  We write some binary settings to the
sysfs file.  One of the settings is the "->startup_profile".  There
isn't any checking to make sure it fits into the
pyra->profile_settings[] array in the profile_activated() function.

I added a check to pyra_sysfs_write_settings() in both places because
I wasn't positive that the other callers were correct.

Cc: <stable@vger.kernel.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Current vfio-pci just supports normal pci device, so vfio_pci_probe() will
return if the pci device is not a normal device. While current code makes a
mistake. PCI_HEADER_TYPE is the offset in configuration space of the device
type, but we use this value to mask the type value.

This patch fixs this by do the check directly on the pci_dev->hdr_type.
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org # v3.6+

commit 8b38694a
    vhost/net: virtio 1.0 byte swap
had this chunk:
-       heads[headcount - 1].len += datalen;
+       heads[headcount - 1].len = cpu_to_vhost32(vq, len - datalen);

This adds datalen with the wrong sign, causing guest panics.

Fixes: 8b38694aReported-by: NAlex Williamson <alex.williamson@redhat.com>
Suggested-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently disable_irq() doesn't work for pinctrl-st driver, due to
missing irq_disable hook in the driver.
disable_irq() is required only for level-triggered interrupts, which
is not the case normally.
Signed-off-by: NPankaj Dev <pankaj.dev@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Using the sysfs inteface to inspect the pins configuration
the system can walk around a path which acquires the same
mutex twice.

On STiH407 platform, for example :
cat /sys/kernel/debug/pinctrl/920f080.pin-controller-front0/pinconf-pins
hangs the kernel and never returns.

With this patch the mutex is temporary freed.
Signed-off-by: NFrancesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The counter variable wasn't increased at all which may stuck under
certain circumstances.
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The L521X variant of the Dell XPS15 has integrated nvidia graphics, and
backlight control does not work properly when using the native interfaces.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1163574Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Since e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct"),
the transimt shaper timeout is always set to 0.  The value the user sets via
xenbus is never propagated to the transmit shaper.

This patch fixes the issue.

Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: NImre Palik <imrep@amazon.de>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support ndo_features_check to avoid:
 - the transport offset is more than the hw limitation when using hw checksum.
 - the skb->len of a GSO packet is more than the limitation.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes kfd_ioctl() to be very similar to drm_ioctl().

The patch defines an array of amdkfd_ioctls, which maps IOCTL definition to the
ioctl function.

The kfd_ioctl() uses that mapping to call the appropriate ioctl function,
through a function pointer.

This patch also declares a new typedef for the ioctl function pointer.

v2: Renamed KFD_COMMAND_(START|END) to AMDKFD_...
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>