Fix indentation, remove dead code, improve some comments, change dev_dbg to
dev_printk.
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove unused structure members, improve comments, break long comment lines,
rename a constant to be consistent with others in the file.
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove unnecessary irq_sem code.
Signed-off-by: NChris Snook <csnook@redhat.com>
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch is for cdc subset to support Mavell vendor/product ID.
Signed-off-by: NJing Xiang <everxiang@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NMika Lansirinne <mika.lansirinne@stonesoft.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove nonsensical limit in the tx done routine. Specifically,
the loop will always terminate after processing <= 1 rings worth
of frames, as the mcp index is not refetched, so the removed
conditional could never be true.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

A long time ago we used OCP with the gianfar driver.  Eventually when
we kill arch/ppc including this will cause issues so lets just kill it now.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

CONFIG_EP93XX_ETH=y, CONFIG_MII=n results in an obvious link error.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add multicast capability to Atmel ethernet macb driver.
Signed-off-by: NPatrice Vilchez <patrice.vilchez@rfo.atmel.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Convert the macb driver to use the generic PHY layer in
drivers/net/phy.
Signed-off-by: NFrederic RODO <f.rodo@til-technologies.fr>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add barrier to loop where atomic variable is evaluated.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

For large incoming packets > PAGE_SIZE/2 qeth creates a fragmented skb
by adding pointers to qdio pages to the fragment list of the skb.
This avoids allocating big chunks of consecutive memory. Also copying
data from the qdio buffer to the skb is economized.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch adds support for DLPAR memory add to the eHEA driver. To detect
whether memory was added the driver uses its own memory mapping table and
checks for kernel addresses whether they're located in already known memory
sections. If not the function ehea_rereg_mrs() is triggered which performs
a rebuild of the mapping table and a re-registration of the global memory
region.
Signed-off-by: NThomas Klein <tklein@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream

This patch fixes a potential null dereference bug where we dereference
nic before a null check. This patch simply moves the dereferencing
after the null check.

Signed-off-by: Micah Gruber < micah.gruber@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: at91_mci: fix hanging and rework to match flowcharts
  mmc: at91_mci typo
  sdhci: Fix "Unexpected interrupt" handling
  mmc: fix silly copy-and-paste error
  mmc: move layer init and workqueue to core file
  mmc: refactor host class handling
  mmc: refactor bus operations
  sdhci: add ene controller id
  mmc: bounce requests for simple hosts

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
  bonding/bond_main.c: make 2 functions static
  ps3: gigabit ethernet driver for PS3, take3
  [netdrvr] Fix dependencies for ax88796 ne2k clone driver
  eHEA: Capability flag for DLPAR support
  Remove sk98lin ethernet driver.
  sunhme.c:quattro_pci_find() must be __devinit
  bonding / ipv6: no addrconf for slaves separately from master
  atl1: remove write-only var in tx handler
  macmace: use "unsigned long flags;"
  Cleanup usbnet_probe() return value handling
  netxen: deinline and sparse fix
  eeprom_93cx6: shorten pulse timing to match spec (bis)
  phylib: Add Marvell 88E1112 phy id
  phylib: cleanup marvell.c a bit
  AX88796 network driver
  IOC3: Switch to pci refcounting safe APIs
  e100: Fix Tyan motherboard e100 not receiving IPMI commands
  QE Ethernet driver writes to wrong register to mask interrupts
  rrunner.c:rr_init() must be __devinit
  tokenring/3c359.c:xl_init() must be __devinit
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits)
  [libata] sata_mv: print out additional chip info during probe
  [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info
  [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145)
  [libata] Clean up driver udma_mask initializers
  libata: Support chips with 64K PRD quirk
  Add a PCI ID for santa rosa's PATA controller.
  sata_sil24: sil24_interrupt() micro-optimisation
  Add irq_flags to struct pata_platform_info
  sata_promise: cleanups
  [libata] pata_ixp4xx: kill unused var
  ata_piix: fix pio/mwdma programming
  [libata] ahci: minor internal cleanups
  [ATA] Add named constant for ATAPI command DEVICE RESET
  [libata] sata_sx4, sata_via: minor documentation updates
  [libata] ahci: minor internal cleanups
  [libata] ahci: Factor out SATA port init into a separate function
  [libata] pata_sil680: minor cleanups from benh
  [libata] sata_sx4: named constant cleanup
  [libata] pata_ixp4xx: convert to new EH
  [libata] pdc_adma: Reorder initializers with a couple structs
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits)
  [MIPS] PNX8550: Cleanup proc code.
  [MIPS] WRPPMC: Fix build.
  [MIPS] Yosemite: Fix modpost warnings.
  [MIPS] Change names of local variables to silence sparse
  [MIPS] SB1: Fix modpost warning.
  [MIPS] PNX: Fix modpost warnings.
  [MIPS] Alchemy: Fix modpost warnings.
  [MIPS] Non-FPAFF: Fix warning.
  [MIPS] DEC: Fix modpost warning.
  [MIPS] MIPSsim: Enable MIPSsim virtual network driver.
  [MIPS] Delete Ocelot 3 support.
  [MIPS] remove LASAT Networks platforms support
  [MIPS] Early check for SMTC kernel on non-MT processor
  [MIPS] Add debugfs files to show fpuemu statistics
  [MIPS] Add some debugfs files to debug unaligned accesses
  [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs
  [MIPS] tc35815: Load MAC address via platform_device
  [MIPS] Move FPU affinity code into separate file.
  [MIPS] Make ioremap() work on TX39/49 special unmapped segment
  [MIPS] rbtx4938: Update and minimize defconfig
  ...

* git://git.infradead.org/~dwmw2/battery-2.6:
  [BATTERY] ds2760 W1 slave
  [BATTERY] One Laptop Per Child power/battery driver
  [BATTERY] Apple PMU driver
  [BATTERY] 1-Wire ds2760 chip battery driver
  [BATTERY] APM emulation driver for class batteries
  [BATTERY] pda_power platform driver
  [BATTERY] Universal power supply class (was: battery class)

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] vmlogrdr function annotation.
  [S390] s390: rename CPU_IDLE to S390_CPU_IDLE
  [S390] cio: Remove prototype for non-existing function cmf_reset().
  [S390] zcrypt: fix request timeout handling
  [S390] system call optimization.
  [S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE
  [S390] Remove volatile from atomic_t
  [S390] Program check in diag 210 under 31 bit
  [S390] Bogomips calculation for 64 bit.
  [S390] smp: Merge smp_count_cpus() and smp_get_save_areas().
  [S390] zcore: Fix __user annotation.
  [S390] fixed cdl-format detection.
  [S390] sclp: Test facility list before executing a service call.
  [S390] sclp: introduce some new interfaces.
  [S390] Fixed comment typo.
  [S390] vmcp cleanup

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
  [GFS2] Accept old format NFS filehandles
  [GFS2] Small fixes to logging code
  [DLM] dump more lock values
  [GFS2] Remove i_mode passing from NFS File Handle
  [GFS2] Obtaining no_formal_ino from directory entry
  [GFS2] git-gfs2-nmw-build-fix
  [GFS2] System won't suspend with GFS2 file system mounted
  [GFS2] remounting w/o acl option leaves acls enabled
  [GFS2] inode size inconsistency
  [DLM] Telnet to port 21064 can stop all lockspaces
  [GFS2] Fix gfs2_block_truncate_page err return
  [GFS2] Addendum to the journaled file/unmount patch
  [GFS2] Simplify multiple glock aquisition
  [GFS2] assertion failure after writing to journaled file, umount
  [GFS2] Use zero_user_page() in stuffed_readpage()
  [GFS2] Remove bogus '\0' in rgrp.c
  [GFS2] Journaled file write/unstuff bug
  [DLM] don't require FS flag on all nodes
  [GFS2] Fix deallocation issues
  [GFS2] return conflicts for GETLK
  ...

* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
  pipe: add documentation and comments
  pipe: change the ->pin() operation to ->confirm()
  Remove remnants of sendfile()
  xip sendfile removal
  splice: completely document external interface with kerneldoc
  sendfile: remove bad_sendfile() from bad_file_ops
  shmem: convert to using splice instead of sendfile()
  relay: use splice_to_pipe() instead of open-coding the pipe loop
  pipe: allow passing around of ops private pointer
  splice: divorce the splice structure/function definitions from the pipe header
  splice: relay support
  sendfile: convert nfsd to splice_direct_to_actor()
  sendfile: convert nfs to using splice_read()
  loop: convert to using splice_direct_to_actor() instead of sendfile()
  splice: add void cookie to the actor data
  sendfile: kill generic_file_sendfile()
  sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
  sys_sendfile: switch to using ->splice_read, if available
  vmsplice: add vmsplice-to-user support
  splice: abstract out actor data

* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
  Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different
  Use list_for_each_entry() instead of list_for_each() in the block device
  Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
  block/Kconfig already has its own "menuconfig" so remove these
  Use menuconfigs instead of menus, so the whole menu can be disabled at once
  cfq-iosched: fix async queue behaviour
  unexport bio_{,un}map_user
  Remove legacy CDROM drivers
  [PATCH] fix request->cmd == INT cases
  cciss: add new controller support for P700m
  [PATCH] Remove acsi.c
  [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio
  [PATCH] cdrom_sysctl_info fix
  blk_hw_contig_segment(): bad segment size checks
  [TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Chad Tindel <ctindel@users.sourceforge.net>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Victor Porton reported that the SoftMAC layer had random problem when setting the ESSID :
http://bugzilla.kernel.org/show_bug.cgi?id=8686 After investigation, it turned out to be
worse, the SoftMAC layer is left in an inconsistent state. The fix is pretty trivial.
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com>
Acked-by: NMichael Buesch <mb@bu3sch.df>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Use list_for_each_entry() instead of manual iteration and substitute a
list_for_each_safe() loop with list_for_each_entry_safe()
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: NLuis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Found by Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch removes dead code introduced by
commit 90a42210 and spotted
by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

While playing with the firmware a while back, I discovered a way to
access the device's entire address space before the firmware has been
loaded.

Previously we were loading the firmware early on (during probe) so that
we could read the MAC address from the EEPROM and register a netdevice.
Now that we can read the EEPROM without having firmware, we can defer
firmware loading until later while still reading the MAC address early
on.

This has the advantage that zd1211rw can now be built into the kernel --
previously if this was the case, zd1211rw would be loaded before the
filesystem is available and firmware loading would fail.

Firmware load and other device initialization operations now happen the
first time the interface is brought up.

Some architectural changes were needed: handling of the is_zd1211b flag
was moved into the zd_usb structure, MAC address handling was obviously
changed, and a preinit_hw stage was added (the order is now: init,
preinit_hw, init_hw).
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Tested by Zen Kato
zd1211b chip 0411:00da v4810 high 00-16-01 AL2230S_RF pa0 g--N-
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Zen Kato has a device which reports the 0xa RF type. The vendor driver
treats this as AL2230S, the same as devices with the AL2230S bit in the POD.
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Zen Kato's device has a regulatory domain value of 0x49, which is not an
IEEE 802.11 code and is not even identified in the vendor driver.

Recent versions of the vendor driver don't even look at the regdomain
value any more, and just allow channels 1-11 everywhere. This patch
brings us more in line with that behaviour, by allowing channels 1-11
for regdomains which we don't know about.
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Hi,

This is the third submission of the network driver for PS3.
The differences from the previous one are:

  - renamed source file names so that their prefix can match
    with the module name
  - added cbe-oss-dev@ozlabs.org line for MAINTAINER file
  - changed some in copyright comments

If there are no more comments, please apply for 2.6.23.

Thank you

--
Subject: PS3: Ethernet driver

From: Masakazu Mokuno <mokuno@sm.sony.co.jp>

Add Gigabit Ethernet support for the PS3 game console.  The module will
be called ps3_gelic.

CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Don't turn the radio on until the interface is up. This saves some power in
case the driver is loaded but the card is not used.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Callers of enable_MAC() shouldn't have to worry about the bits in the
response's status word (and most of them don't). The return value is
sufficient information.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Matteo Croce reported Aironet initialization failures. They were caused by
a race in airo. airo finds a free interface name, then initializes the card
and finally registers the interface. Another device may get the same name
in the meantime.
The reason airo gets its name early is to use it in informative printks and
to name the resources it requests. The printks will be just fine without
the interface name and the resources can use the driver's name - that's
what other network drivers do anyway.
One of the talkative functions is setup_card(). It is called once before
registration and can be called later again. Let's have an empty dev->name
during the first call, so it doesn't print the ugly "airo(eth%d)" message.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

airo's kernel thread and the IRQ handler are needed only when the interface
is up.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fix an assymetry between pci_{enable,disable}_device. airo did not disable
the PCI device when unloading the module. This caused suspend failures
after modprobe -r airo && modprobe airo.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

It needs writesb(), not available on all platforms.
Signed-off-by: NJeff Garzik <jeff@garzik.org>