- 06 9月, 2011 2 次提交
-
-
由 Jim Garlick 提交于
Signed-off-by: NJim Garlick <garlick@llnl.gov> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
Some of the flags are OS/arch dependent we add a 9p protocol value which maps to asm-generic/fcntl.h values in Linux Based on the original patch from Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
- 23 7月, 2011 4 次提交
-
-
由 Aneesh Kumar K.V 提交于
unlinkat - Remove a directory entry size[4] Tunlinkat tag[2] dirfid[4] name[s] flag[4] size[4] Runlinkat tag[2] older Tremove have the below request format size[4] Tremove tag[2] fid[4] The remove message is used to remove a directory entry either file or directory The remove opreation is actually a directory opertation and should ideally have dirfid, if not we cannot represent the fid on server with anything other than name. We will have to derive the directory name from fid in the Tremove request. NOTE: The operation doesn't clunk the unlink fid. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
renameat - change name of file or directory size[4] Trenameat tag[2] olddirfid[4] oldname[s] newdirfid[4] newname[s] size[4] Rrenameat tag[2] older Trename have the below request format size[4] Trename tag[2] fid[4] newdirfid[4] name[s] The rename message is used to change the name of a file, possibly moving it to a new directory. The rename opreation is actually a directory opertation and should ideally have olddirfid, if not we cannot represent the fid on server with anything other than name. We will have to derive the old directory name from fid in the Trename request. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
Switch to generic kernel hexdump library and cleanup macros to be more consistent with the way we do normal debug prints. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 25 5月, 2011 2 次提交
-
-
由 Sasha Levin 提交于
There are two small cleanups in this patch: - p9_errstr2errno was declared twice - remove one declaration. - A uint8_t type was mixed in, change it to u8 to match with the rest of the type names and remove dependency. Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NSasha Levin <levinsasha928@gmail.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Rob Landley 提交于
Typo fixes and minor cleanups for v9fs Signed-off-by: NRob Landley <rob@landley.net> Reviewed-by: NVenkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 16 4月, 2011 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
Now that we use write_inode to flush server cache related to fid, we don't need tsyncfs either fort dotl or dotu protocols. For dotu this helps to do a more efficient server flush. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 15 3月, 2011 3 次提交
-
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
If a transport prefers payload to be sent separate from the PDU (P9_TRANS_PREF_PAYLOAD_SEP), there is no need to allocate msize PDU buffers(struct p9_fcall). This patch allocates only upto 4k buffers for this kind of transports and there won't be any change to the legacy transports. Hence, this patch on top of zero copy changes allows user to specify higher msizes through the mount option without hogging the kernel heap. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
This patch prepares p9_fcall structure for zero copy. Added fields send the payload buffer information to the transport layer. In addition it adds a 'private' field for the transport layer to store mapped/pinned page information so that it can be freed/unpinned during req_done. This patch also creates trans_common.[ch] to house helper functions. It adds the following helper functions. p9_release_req_pages - Release pages after the transaction. p9_nr_pages - Return number of pages needed to accomodate the payload. payload_gup - Translates user buffer into kernel pages. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 28 10月, 2010 5 次提交
-
-
由 M. Mohan Kumar 提交于
Synopsis size[4] TReadlink tag[2] fid[4] size[4] RReadlink tag[2] target[s] Description Readlink is used to return the contents of the symoblic link referred by fid. Contents of symboic link is returned as a response. target[s] - Contents of the symbolic link referred by fid. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 M. Mohan Kumar 提交于
Synopsis size[4] TGetlock tag[2] fid[4] getlock[n] size[4] RGetlock tag[2] getlock[n] Description TGetlock is used to test for the existence of byte range posix locks on a file identified by given fid. The reply contains getlock structure. If the lock could be placed it returns F_UNLCK in type field of getlock structure. Otherwise it returns the details of the conflicting locks in the getlock structure getlock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK start[8] - Starting offset for lock length[8] - Number of bytes to check for the lock If length is 0, check for lock in all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock/owns the task in case of reply client[4] - Client id of the system that owns the process which has the conflicting lock Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 M. Mohan Kumar 提交于
Synopsis size[4] TLock tag[2] fid[4] flock[n] size[4] RLock tag[2] status[1] Description Tlock is used to acquire/release byte range posix locks on a file identified by given fid. The reply contains status of the lock request flock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK flags[4] - Flags could be either of P9_LOCK_FLAGS_BLOCK - Blocked lock request, if there is a conflicting lock exists, wait for that lock to be released. P9_LOCK_FLAGS_RECLAIM - Reclaim lock request, used when client is trying to reclaim a lock after a server restrart (due to crash) start[8] - Starting offset for lock length[8] - Number of bytes to lock If length is 0, lock all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock client_id[4] - Unique client id status[1] - Status of the lock request, can be P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or P9_LOCK_GRACE(3) P9_LOCK_SUCCESS - Request was successful P9_LOCK_BLOCKED - A conflicting lock is held by another process P9_LOCK_ERROR - Error while processing the lock request P9_LOCK_GRACE - Server is in grace period, it can't accept new lock requests in this period (except locks with P9_LOCK_FLAGS_RECLAIM flag set) Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
SYNOPSIS size[4] Tfsync tag[2] fid[4] size[4] Rfsync tag[2] DESCRIPTION The Tfsync transaction transfers ("flushes") all modified in-core data of file identified by fid to the disk device (or other permanent storage device) where that file resides. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Arun R Bharadwaj 提交于
Signed-off-by: NArun R Bharadwaj <arun@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 03 8月, 2010 11 次提交
-
-
由 Aneesh Kumar K.V 提交于
TXATTRCREATE: Prepare a fid for setting xattr value on a file system object. size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4] size[4] RXATTRCREATE tag[2] txattrcreate gets a fid pointing to xattr. This fid can later be used to set the xattr value. flag value is derived from set Linux setxattr. The manpage says "The flags parameter can be used to refine the semantics of the operation. XATTR_CREATE specifies a pure create, which fails if the named attribute exists already. XATTR_REPLACE specifies a pure replace operation, which fails if the named attribute does not already exist. By default (no flags), the extended attribute will be created if need be, or will simply replace the value if the attribute exists." The actual setxattr operation happens when the fid is clunked. At that point the written byte count and the attr_size specified in TXATTRCREATE should be same otherwise an error will be returned. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
TXATTRWALK: Descend a ATTR namespace size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s] size[4] RXATTRWALK tag[2] size[8] txattrwalk gets a fid pointing to xattr. This fid can later be used to read the xattr value. If name is NULL the fid returned can be used to get the list of extended attribute associated to the file system object. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 M. Mohan Kumar 提交于
Implement 9p2000.L version of open(LOPEN) interface in 9p client. For LOPEN, no need to convert the flags to and from 9p mode to VFS mode. Synopsis: size[4] Tlopen tag[2] fid[4] mode[4] size[4] Rlopen tag[2] qid[13] iounit[4] [Fix mode bit format - jvrao@linux.vnet.ibm.com] Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbegren <ericvh@gmail.com>
-
SYNOPSIS size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4] size[4] Rlcreate tag[2] qid[13] iounit[4] DESCRIPTION The Tlreate request asks the file server to create a new regular file with the name supplied, in the directory (dir) represented by fid. The mode argument specifies the permissions to use. New file is created with the uid if the fid and with supplied gid. The flags argument represent Linux access mode flags with which the caller is requesting to open the file with. Protocol allows all the Linux access modes but it is upto the server to allow/disallow any of these acess modes. If the server doesn't support any of the access mode, it is expected to return error. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 M. Mohan Kumar 提交于
Implement TMKDIR as part of 2000.L Work Synopsis size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4] size[4] Rmkdir tag[2] qid[13] Description mkdir asks the file server to create a directory with given name, mode and gid. The qid for the new directory is returned with the mkdir reply message. Note: 72 is selected as the opcode for TMKDIR from the reserved list. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 M. Mohan Kumar 提交于
Synopsis size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4] size[4] Rmknod tag[2] qid[13] Description mknod asks the file server to create a device node with given major and minor number, mode and gid. The qid for the new device node is returned with the mknod reply message. [sripathik@in.ibm.com: Fix error handling code] Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
Create a symbolic link SYNOPSIS size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4] size[4] Rsymlink tag[2] qid[13] DESCRIPTION Create a symbolic link named 'name' pointing to 'symtgt'. gid represents the effective group id of the caller. The permissions of a symbolic link are irrelevant hence it is omitted from the protocol. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Reviewed-by: NSripathi Kodi <sripathik@in.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
This patch adds a helper function to get the dentry from inode and uses it in creating a Hardlink SYNOPSIS size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s] size[4] Rlink tag[2] DESCRIPTION Create a link 'newpath' in directory pointed by dfid linking to oldfid path. [sripathik@in.ibm.com : p9_client_link should not free req structure if p9_client_rpc has returned an error.] Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Sripathi Kodi 提交于
SYNOPSIS size[4] Tsetattr tag[2] attr[n] size[4] Rsetattr tag[2] DESCRIPTION The setattr command changes some of the file status information. attr resembles the iattr structure used in Linux kernel. It specifies which status parameter is to be changed and to what value. It is laid out as follows: valid[4] specifies which status information is to be changed. Possible values are: ATTR_MODE (1 << 0) ATTR_UID (1 << 1) ATTR_GID (1 << 2) ATTR_SIZE (1 << 3) ATTR_ATIME (1 << 4) ATTR_MTIME (1 << 5) ATTR_ATIME_SET (1 << 7) ATTR_MTIME_SET (1 << 8) The last two bits represent whether the time information is being sent by the client's user space. In the absense of these bits the server always uses server's time. mode[4] File permission bits uid[4] Owner id of file gid[4] Group id of the file size[8] File size atime_sec[8] Time of last file access, seconds atime_nsec[8] Time of last file access, nanoseconds mtime_sec[8] Time of last file modification, seconds mtime_nsec[8] Time of last file modification, nanoseconds Explanation of the patches: -------------------------- *) The kernel just copies relevent contents of iattr structure to p9_iattr_dotl structure and passes it down to the client. The only check it has is calling inode_change_ok() *) The p9_iattr_dotl structure does not have ctime and ia_file parameters because I don't think these are needed in our case. The client user space can request updating just ctime by calling chown(fd, -1, -1). This is handled on server side without a need for putting ctime on the wire. *) The server currently supports changing mode, time, ownership and size of the file. *) 9P RFC says "Either all the changes in wstat request happen, or none of them does: if the request succeeds, all changes were made; if it fails, none were." I have not done anything to implement this specifically because I don't see a reason. Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Sripathi Kodi 提交于
SYNOPSIS size[4] Tgetattr tag[2] fid[4] request_mask[8] size[4] Rgetattr tag[2] lstat[n] DESCRIPTION The getattr transaction inquires about the file identified by fid. request_mask is a bit mask that specifies which fields of the stat structure is the client interested in. The reply will contain a machine-independent directory entry, laid out as follows: st_result_mask[8] Bit mask that indicates which fields in the stat structure have been populated by the server qid.type[1] the type of the file (directory, etc.), represented as a bit vector corresponding to the high 8 bits of the file's mode word. qid.vers[4] version number for given path qid.path[8] the file server's unique identification for the file st_mode[4] Permission and flags st_uid[4] User id of owner st_gid[4] Group ID of owner st_nlink[8] Number of hard links st_rdev[8] Device ID (if special file) st_size[8] Size, in bytes st_blksize[8] Block size for file system IO st_blocks[8] Number of file system blocks allocated st_atime_sec[8] Time of last access, seconds st_atime_nsec[8] Time of last access, nanoseconds st_mtime_sec[8] Time of last modification, seconds st_mtime_nsec[8] Time of last modification, nanoseconds st_ctime_sec[8] Time of last status change, seconds st_ctime_nsec[8] Time of last status change, nanoseconds st_btime_sec[8] Time of creation (birth) of file, seconds st_btime_nsec[8] Time of creation (birth) of file, nanoseconds st_gen[8] Inode generation st_data_version[8] Data version number request_mask and result_mask bit masks contain the following bits #define P9_STATS_MODE 0x00000001ULL #define P9_STATS_NLINK 0x00000002ULL #define P9_STATS_UID 0x00000004ULL #define P9_STATS_GID 0x00000008ULL #define P9_STATS_RDEV 0x00000010ULL #define P9_STATS_ATIME 0x00000020ULL #define P9_STATS_MTIME 0x00000040ULL #define P9_STATS_CTIME 0x00000080ULL #define P9_STATS_INO 0x00000100ULL #define P9_STATS_SIZE 0x00000200ULL #define P9_STATS_BLOCKS 0x00000400ULL #define P9_STATS_BTIME 0x00000800ULL #define P9_STATS_GEN 0x00001000ULL #define P9_STATS_DATA_VERSION 0x00002000ULL #define P9_STATS_BASIC 0x000007ffULL #define P9_STATS_ALL 0x00003fffULL This patch implements the client side of getattr implementation for 9P2000.L. It introduces a new structure p9_stat_dotl for getting Linux stat information along with QID. The data layout is similar to stat structure in Linux user space with the following major differences: inode (st_ino) is not part of data. Instead qid is. device (st_dev) is not part of data because this doesn't make sense on the client. All time variables are 64 bit wide on the wire. The kernel seems to use 32 bit variables for these variables. However, some of the architectures have used 64 bit variables and glibc exposes 64 bit variables to user space on some architectures. Hence to be on the safer side we have made these 64 bit in the protocol. Refer to the comments in include/asm-generic/stat.h There are some additional fields: st_btime_sec, st_btime_nsec, st_gen, st_data_version apart from the bitmask, st_result_mask. The bit mask is filled by the server to indicate which stat fields have been populated by the server. Currently there is no clean way for the server to obtain these additional fields, so it sends back just the basic fields. Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com> Signed-off-by: NEric Van Hensbegren <ericvh@gmail.com>
-
由 Sripathi Kodi 提交于
This patch implements the kernel part of readdir() implementation for 9p2000.L Change from V3: Instead of inode, server now sends qids for each dirent SYNOPSIS size[4] Treaddir tag[2] fid[4] offset[8] count[4] size[4] Rreaddir tag[2] count[4] data[count] DESCRIPTION The readdir request asks the server to read the directory specified by 'fid' at an offset specified by 'offset' and return as many dirent structures as possible that fit into count bytes. Each dirent structure is laid out as follows. qid.type[1] the type of the file (directory, etc.), represented as a bit vector corresponding to the high 8 bits of the file's mode word. qid.vers[4] version number for given path qid.path[8] the file server's unique identification for the file offset[8] offset into the next dirent. type[1] type of this directory entry. name[256] name of this directory entry. This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L. This function sends P9_TREADDIR command to the server. In response the server sends a buffer filled with dirent structures. This is different from the existing v9fs_dir_readdir() call which receives stat structures from the server. This results in significant speedup of readdir() on large directories. For example, doing 'ls >/dev/null' on a directory with 10000 files on my laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds with the new readdir. Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 22 5月, 2010 2 次提交
-
-
由 Sripathi Kodi 提交于
I made a V2 of this patch on top of my patches for VFS switches. All the changes were due to change in some offsets. rename - change name of file or directory size[4] Trename tag[2] fid[4] newdirfid[4] name[s] size[4] Rrename tag[2] The rename message is used to change the name of a file, possibly moving it to a new directory. The 9P wstat message can only rename a file within the same directory. Signed-off-by: NJim Garlick <garlick@llnl.gov> Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Sripathi Kodi 提交于
I made a V2 of this patch on top of my patches for VFS switches. The change was adding v9fs_statfs pointer to v9fs_super_ops_dotl instead of v9fs_super_ops. statfs - get file system statistics size[4] Tstatfs tag[2] fid[4] size[4] Rstatfs tag[2] type[4] bsize[4] blocks[8] bfree[8] bavail[8] files[8] ffree[8] fsid[8] namelen[4] The statfs message is used to request file system information returned by the statfs(2) system call, which is used by df(1) to report file system and disk space usage. Signed-off-by: NJim Garlick <garlick@llnl.gov> Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 24 9月, 2009 1 次提交
-
-
由 Abhishek Kulkarni 提交于
This patch adds a persistent, read-only caching facility for 9p clients using the FS-Cache caching backend. When the fscache facility is enabled, each inode is associated with a corresponding vcookie which is an index into the FS-Cache indexing tree. The FS-Cache indexing tree is indexed at 3 levels: - session object associated with each mount. - inode/vcookie - actual data (pages) A cache tag is chosen randomly for each session. These tags can be read off /sys/fs/9p/caches and can be passed as a mount-time parameter to re-attach to the specified caching session. Signed-off-by: NAbhishek Kulkarni <adkulkar@umail.iu.edu> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 23 10月, 2008 1 次提交
-
-
由 Eric Van Hensbergen 提交于
Fixes build problem with 9p when building with debug disabled. Also contains some fixes for warnings which pop up when CONFIG_NET_9P_DEBUG is disabled. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 18 10月, 2008 5 次提交
-
-
由 Eric Van Hensbergen 提交于
The new debug support lacks some of the information that the previous fcprint code provided -- this patch focuses on better presentation of debug data along with more helpful debug along error paths. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
Remove depricated conv functions which have been replaced with new protocol routines. This patch also reworks the one instance of the file-system code which directly calls conversion routines (to accomplish unpacking dirreads). Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
Now that the new protocol functions are in place, this patch switches the client code to using the new support code. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
One of the current debug options allows users to get a verbose dump of fcalls. This isn't really necessary as correctly parsed protocol frames can be printed as part of the code in the client functions. The consolidated printfcalls structure would require new entries to be added for every extension. This patch removes the debug print methods and their use. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
This adds a new protocol processing support code based on Anthony Liguori's 9p library code. This code performs protocol marshalling/unmarshalling using printf like strings to represent protocol elements. It is my intent to use them to replace the current functions in conv.c as well as the p9_create_* functions. This should make the client implementation much more clear, and also make it much easier to add new protocol extensions by limiting the number of places in which changes need to be made. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
- 17 10月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 9月, 2008 1 次提交
-
-
由 Tejun Heo 提交于
9p trans modules aren't refcounted nor were they unregistered properly. Fix it. * Add 9p_trans_module->owner and reference the module on each trans instance creation and put it on destruction. * Protect v9fs_trans_list with a spinlock. This isn't strictly necessary as the list is manipulated only during module loading / unloading but it's a good idea to make the API safe. * Unregister trans modules when the corresponding module is being unloaded. * While at it, kill unnecessary EXPORT_SYMBOL on p9_trans_fd_init(). Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-