- 21 8月, 2019 1 次提交
-
-
由 Jens Axboe 提交于
If a request issue ends up being punted to async context to avoid blocking, we can get into a situation where the original application enters the poll loop for that very request before it has been issued. This should not be an issue, except that the polling will hold the io_uring uring_ctx mutex for the duration of the poll. When the async worker has actually issued the request, it needs to acquire this mutex to add the request to the poll issued list. Since the application polling is already holding this mutex, the workqueue sleeps on the mutex forever, and the application thus never gets a chance to poll for the very request it was interested in. Fix this by ensuring that the polling drops the uring_ctx occasionally if it's not making any progress. Reported-by: NJeffrey M. Birnbaum <jmbnyc@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 16 8月, 2019 2 次提交
-
-
由 Jackie Liu 提交于
This patch may fix two issues: First, when IOSQE_IO_DRAIN set, the next IOs need to be inserted into defer list to delay execution, but link io will be actively scheduled to run by calling io_queue_sqe. Second, when multiple LINK_IOs are inserted together with defer_list, the LINK_IO is no longer keep order. |-------------| | LINK_IO | ----> insert to defer_list ----------- |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | NORMAL_IO | ----> insert to defer_list ----------| |-------------| | | queue_work at same time <-----| Fixes: 9e645e11 ("io_uring: add support for sqe links") Signed-off-by: NJackie Liu <liuyun01@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Aleix Roca Nonell 提交于
Commit bd11b3a3 ("io_uring: don't use iov_iter_advance() for fixed buffers") introduced an optimization to avoid using the slow iov_iter_advance by manually populating the iov_iter iterator in some cases. However, the computation of the iterator count field was erroneous: The first bvec was always accounted for an extent of page size even if the bvec length was smaller. In consequence, some I/O operations on fixed buffers were unable to operate on the full extent of the buffer, consistently skipping some bytes at the end of it. Fixes: bd11b3a3 ("io_uring: don't use iov_iter_advance() for fixed buffers") Cc: stable@vger.kernel.org Signed-off-by: NAleix Roca Nonell <aleix.rocanonell@bsc.es> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 31 7月, 2019 1 次提交
-
-
由 Jackie Liu 提交于
[root@localhost ~]# ./liburing/test/link QEMU Standard PC report that: [ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622-dirty #86 [ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work [ 29.379929] Call Trace: [ 29.379953] dump_stack+0xa9/0x10e [ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.379986] print_address_description.cold.6+0x9/0x317 [ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380026] __kasan_report.cold.7+0x1a/0x34 [ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380061] kasan_report+0xe/0x12 [ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380104] ? io_sq_thread+0xaf0/0xaf0 [ 29.380152] process_one_work+0xb59/0x19e0 [ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [ 29.380221] worker_thread+0x8c/0xf40 [ 29.380248] ? __kthread_parkme+0xab/0x110 [ 29.380265] ? process_one_work+0x19e0/0x19e0 [ 29.380278] kthread+0x30b/0x3d0 [ 29.380292] ? kthread_create_on_node+0xe0/0xe0 [ 29.380311] ret_from_fork+0x3a/0x50 [ 29.380635] Allocated by task 209: [ 29.381255] save_stack+0x19/0x80 [ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 29.381279] kmem_cache_alloc+0xc0/0x240 [ 29.381289] io_submit_sqe+0x11bc/0x1c70 [ 29.381300] io_ring_submit+0x174/0x3c0 [ 29.381311] __x64_sys_io_uring_enter+0x601/0x780 [ 29.381322] do_syscall_64+0x9f/0x4d0 [ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.381633] Freed by task 84: [ 29.382186] save_stack+0x19/0x80 [ 29.382198] __kasan_slab_free+0x11d/0x160 [ 29.382210] kmem_cache_free+0x8c/0x2f0 [ 29.382220] io_put_req+0x22/0x30 [ 29.382230] io_sq_wq_submit_work+0x28b/0xe90 [ 29.382241] process_one_work+0xb59/0x19e0 [ 29.382251] worker_thread+0x8c/0xf40 [ 29.382262] kthread+0x30b/0x3d0 [ 29.382272] ret_from_fork+0x3a/0x50 [ 29.382569] The buggy address belongs to the object at ffff888067172140 which belongs to the cache io_kiocb of size 224 [ 29.384692] The buggy address is located 120 bytes inside of 224-byte region [ffff888067172140, ffff888067172220) [ 29.386723] The buggy address belongs to the page: [ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0 [ 29.387587] flags: 0x100000000000200(slab) [ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180 [ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 29.387624] page dumped because: kasan: bad access detected [ 29.387920] Memory state around the buggy address: [ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 29.392578] ^ [ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 29.396003] ================================================================== [ 29.397260] Disabling lock debugging due to kernel taint io_sq_wq_submit_work free and read req again. Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac9 ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by: NJackie Liu <liuyun01@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 26 7月, 2019 1 次提交
-
-
由 Jens Axboe 提交于
Daniel reports that when testing an http server that uses io_uring to poll for incoming connections, sometimes it hard crashes. This is due to an uninitialized list member for the io_uring request. Normally this doesn't trigger and none of the test cases caught it. Reported-by: NDaniel Kozak <kozzi11@gmail.com> Tested-by: NDaniel Kozak <kozzi11@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 22 7月, 2019 2 次提交
-
-
由 Zhengyuan Liu 提交于
We are using PAGE_SIZE as the unit to determine if the total len in async_list has exceeded max_pages, it's not fair for smaller io sizes. For example, if we are doing 1k-size io streams, we will never exceed max_pages since len >>= PAGE_SHIFT always gets zero. So use original bytes to make it more accurate. Signed-off-by: NZhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
Hrvoje reports that when a large fixed buffer is registered and IO is being done to the latter pages of said buffer, the IO submission time is much worse: reading to the start of the buffer: 11238 ns reading to the end of the buffer: 1039879 ns In fact, it's worse by two orders of magnitude. The reason for that is how io_uring figures out how to setup the iov_iter. We point the iter at the first bvec, and then use iov_iter_advance() to fast-forward to the offset within that buffer we need. However, that is abysmally slow, as it entails iterating the bvecs that we setup as part of buffer registration. There's really no need to use this generic helper, as we know it's a BVEC type iterator, and we also know that each bvec is PAGE_SIZE in size, apart from possibly the first and last. Hence we can just use a shift on the offset to find the right index, and then adjust the iov_iter appropriately. After this fix, the timings are: reading to the start of the buffer: 10135 ns reading to the end of the buffer: 1377 ns Or about an 755x improvement for the tail page. Reported-by: NHrvoje Zeba <zeba.hrvoje@gmail.com> Tested-by: NHrvoje Zeba <zeba.hrvoje@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 19 7月, 2019 1 次提交
-
-
由 Zhengyuan Liu 提交于
There is a hang issue while using fio to do some basic test. The issue can be easily reproduced using the below script: while true do fio --ioengine=io_uring -rw=write -bs=4k -numjobs=1 \ -size=1G -iodepth=64 -name=uring --filename=/dev/zero done After several minutes (or more), fio would block at io_uring_enter->io_cqring_wait in order to waiting for previously committed sqes to be completed and can't return to user anymore until we send a SIGTERM to fio. After receiving SIGTERM, fio hangs at io_ring_ctx_wait_and_kill with a backtrace like this: [54133.243816] Call Trace: [54133.243842] __schedule+0x3a0/0x790 [54133.243868] schedule+0x38/0xa0 [54133.243880] schedule_timeout+0x218/0x3b0 [54133.243891] ? sched_clock+0x9/0x10 [54133.243903] ? wait_for_completion+0xa3/0x130 [54133.243916] ? _raw_spin_unlock_irq+0x2c/0x40 [54133.243930] ? trace_hardirqs_on+0x3f/0xe0 [54133.243951] wait_for_completion+0xab/0x130 [54133.243962] ? wake_up_q+0x70/0x70 [54133.243984] io_ring_ctx_wait_and_kill+0xa0/0x1d0 [54133.243998] io_uring_release+0x20/0x30 [54133.244008] __fput+0xcf/0x270 [54133.244029] ____fput+0xe/0x10 [54133.244040] task_work_run+0x7f/0xa0 [54133.244056] do_exit+0x305/0xc40 [54133.244067] ? get_signal+0x13b/0xbd0 [54133.244088] do_group_exit+0x50/0xd0 [54133.244103] get_signal+0x18d/0xbd0 [54133.244112] ? _raw_spin_unlock_irqrestore+0x36/0x60 [54133.244142] do_signal+0x34/0x720 [54133.244171] ? exit_to_usermode_loop+0x7e/0x130 [54133.244190] exit_to_usermode_loop+0xc0/0x130 [54133.244209] do_syscall_64+0x16b/0x1d0 [54133.244221] entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that we had added a req to ctx->pending_async at the very end, but it didn't get a chance to be processed. How could this happen? fio#cpu0 wq#cpu1 io_add_to_prev_work io_sq_wq_submit_work atomic_read() <<< 1 atomic_dec_return() << 1->0 list_empty(); <<< true; list_add_tail() atomic_read() << 0 or 1? As atomic_ops.rst states, atomic_read does not guarantee that the runtime modification by any other thread is visible yet, so we must take care of that with a proper implicit or explicit memory barrier. This issue was detected with the help of Jackie's <liuyun01@kylinos.cn> Fixes: 31b51510 ("io_uring: allow workqueue item to handle multiple buffered requests") Signed-off-by: NZhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 17 7月, 2019 1 次提交
-
-
由 Oleg Nesterov 提交于
task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 7月, 2019 2 次提交
-
-
由 Zhengyuan Liu 提交于
We could queue a work for each req in defer and link list without increasing async_list->cnt, so we shouldn't decrease it while exiting from workqueue as well if we didn't process the req in async list. Thanks to Jens Axboe <axboe@kernel.dk> for his guidance. Fixes: 31b51510 ("io_uring: allow workqueue item to handle multiple buffered requests") Signed-off-by: NZhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Zhengyuan Liu 提交于
sq->cached_sq_head and cq->cached_cq_tail are both unsigned int. If cached_sq_head overflows before cached_cq_tail, then we may miss a barrier req. As cached_cq_tail always follows cached_sq_head, the NQ should be enough. Cc: stable@vger.kernel.org Fixes: de0617e4 ("io_uring: add support for marking commands as draining") Signed-off-by: NZhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 10 7月, 2019 3 次提交
-
-
由 Jackie Liu 提交于
INFO: task syz-executor.5:8634 blocked for more than 143 seconds. Not tainted 5.2.0-rc5+ #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor.5 D25632 8634 8224 0x00004004 Call Trace: context_switch kernel/sched/core.c:2818 [inline] __schedule+0x658/0x9e0 kernel/sched/core.c:3445 schedule+0x131/0x1d0 kernel/sched/core.c:3509 schedule_timeout+0x9a/0x2b0 kernel/time/timer.c:1783 do_wait_for_common+0x35e/0x5a0 kernel/sched/completion.c:83 __wait_for_common kernel/sched/completion.c:104 [inline] wait_for_common kernel/sched/completion.c:115 [inline] wait_for_completion+0x47/0x60 kernel/sched/completion.c:136 kthread_stop+0xb4/0x150 kernel/kthread.c:559 io_sq_thread_stop fs/io_uring.c:2252 [inline] io_finish_async fs/io_uring.c:2259 [inline] io_ring_ctx_free fs/io_uring.c:2770 [inline] io_ring_ctx_wait_and_kill+0x268/0x880 fs/io_uring.c:2834 io_uring_release+0x5d/0x70 fs/io_uring.c:2842 __fput+0x2e4/0x740 fs/file_table.c:280 ____fput+0x15/0x20 fs/file_table.c:313 task_work_run+0x17e/0x1b0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop arch/x86/entry/common.c:168 [inline] prepare_exit_to_usermode+0x402/0x4f0 arch/x86/entry/common.c:199 syscall_return_slowpath+0x110/0x440 arch/x86/entry/common.c:279 do_syscall_64+0x126/0x140 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x412fb1 Code: 80 3b 7c 0f 84 c7 02 00 00 c7 85 d0 00 00 00 00 00 00 00 48 8b 05 cf a6 24 00 49 8b 14 24 41 b9 cb 2a 44 00 48 89 ee 48 89 df <48> 85 c0 4c 0f 45 c8 45 31 c0 31 c9 e8 0e 5b 00 00 85 c0 41 89 c7 RSP: 002b:00007ffe7ee6a180 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000412fb1 RDX: 0000001b2d920000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 00000000f3a3e1f8 R09: 00000000f3a3e1fc R10: 00007ffe7ee6a260 R11: 0000000000000293 R12: 000000000075c9a0 R13: 000000000075c9a0 R14: 0000000000024c00 R15: 000000000075bf2c ============================================= There is an wrong logic, when kthread_park running in front of io_sq_thread. CPU#0 CPU#1 io_sq_thread_stop: int kthread(void *_create): kthread_park() __kthread_parkme(self); <<< Wrong kthread_stop() << wait for self->exited << clear_bit KTHREAD_SHOULD_PARK ret = threadfn(data); | |- io_sq_thread |- kthread_should_park() << false |- schedule() <<< nobody wake up stuck CPU#0 stuck CPU#1 So, use a new variable sqo_thread_started to ensure that io_sq_thread run first, then io_sq_thread_stop. Reported-by: syzbot+94324416c485d422fe15@syzkaller.appspotmail.com Suggested-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJackie Liu <liuyun01@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
This is done through IORING_OP_RECVMSG. This opcode uses the same sqe->msg_flags that IORING_OP_SENDMSG added, and we pass in the msghdr struct in the sqe->addr field as well. We use MSG_DONTWAIT to force an inline fast path if recvmsg() doesn't block, and punt to async execution if it would have. Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
This is done through IORING_OP_SENDMSG. There's a new sqe->msg_flags for the flags argument, and the msghdr struct is passed in the sqe->addr field. We use MSG_DONTWAIT to force an inline fast path if sendmsg() doesn't block, and punt to async execution if it would have. Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 29 6月, 2019 2 次提交
-
-
由 Christoph Hellwig 提交于
If we pass pages through an iov_iter we always already have a reference in the caller. Thus remove the ITER_BVEC_FLAG_NO_REF and don't take reference to pages by default for bvec backed iov_iters. Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Oleg Nesterov 提交于
This is the minimal fix for stable, I'll send cleanups later. Commit 854a6ed5 ("signal: Add restore_user_sigmask()") introduced the visible change which breaks user-space: a signal temporary unblocked by set_user_sigmask() can be delivered even if the caller returns success or timeout. Change restore_user_sigmask() to accept the additional "interrupted" argument which should be used instead of signal_pending() check, and update the callers. Eric said: : For clarity. I don't think this is required by posix, or fundamentally to : remove the races in select. It is what linux has always done and we have : applications who care so I agree this fix is needed. : : Further in any case where the semantic change that this patch rolls back : (aka where allowing a signal to be delivered and the select like call to : complete) would be advantage we can do as well if not better by using : signalfd. : : Michael is there any chance we can get this guarantee of the linux : implementation of pselect and friends clearly documented. The guarantee : that if the system call completes successfully we are guaranteed that no : signal that is unblocked by using sigmask will be delivered? Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com Fixes: 854a6ed5 ("signal: Add restore_user_sigmask()") Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reported-by: NEric Wong <e@80x24.org> Tested-by: NEric Wong <e@80x24.org> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDeepa Dinamani <deepa.kernel@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 6月, 2019 1 次提交
-
-
由 Jens Axboe 提交于
With SQE links, we can create chains of dependent SQEs. One example would be queueing an SQE that's a read from one file descriptor, with the linked SQE being a write to another with the same set of buffers. An SQE link will not stall the pipeline, it'll just ensure that dependent SQEs aren't issued before the previous link has completed. Any error at submission or completion time will break the chain of SQEs. For completions, this also includes short reads or writes, as the next SQE could depend on the previous one being fully completed. Any SQE in a chain that gets canceled due to any of the above errors, will get an CQE fill with -ECANCELED as the error value. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 22 6月, 2019 1 次提交
-
-
由 Jens Axboe 提交于
Stephen reports: I hit the following General Protection Fault when testing io_uring via the io_uring engine in fio. This was on a VM running 5.2-rc5 and the latest version of fio. The issue occurs for both null_blk and fake NVMe drives. I have not tested bare metal or real NVMe SSDs. The fio script used is given below. [io_uring] time_based=1 runtime=60 filename=/dev/nvme2n1 (note /dev/nullb0 also fails) ioengine=io_uring bs=4k rw=readwrite direct=1 fixedbufs=1 sqthread_poll=1 sqthread_poll_cpu=0 general protection fault: 0000 [#1] SMP PTI CPU: 0 PID: 872 Comm: io_uring-sq Not tainted 5.2.0-rc5-cpacket-io-uring #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 RIP: 0010:fput_many+0x7/0x90 Code: 01 48 85 ff 74 17 55 48 89 e5 53 48 8b 1f e8 a0 f9 ff ff 48 85 db 48 89 df 75 f0 5b 5d f3 c3 0f 1f 40 00 0f 1f 44 00 00 89 f6 <f0> 48 29 77 38 74 01 c3 55 48 89 e5 53 48 89 fb 65 48 \ RSP: 0018:ffffadeb817ebc50 EFLAGS: 00010246 RAX: 0000000000000004 RBX: ffff8f46ad477480 RCX: 0000000000001805 RDX: 0000000000000000 RSI: 0000000000000001 RDI: f18b51b9a39552b5 RBP: ffffadeb817ebc58 R08: ffff8f46b7a318c0 R09: 000000000000015d R10: ffffadeb817ebce8 R11: 0000000000000020 R12: ffff8f46ad4cd000 R13: 00000000fffffff7 R14: ffffadeb817ebe30 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8f46b7a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055828f0bbbf0 CR3: 0000000232176004 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? fput+0x13/0x20 io_free_req+0x20/0x40 io_put_req+0x1b/0x20 io_submit_sqe+0x40a/0x680 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 io_submit_sqes+0xb9/0x160 ? io_submit_sqes+0xb9/0x160 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __schedule+0x3f2/0x6a0 ? __switch_to_asm+0x34/0x70 io_sq_thread+0x1af/0x470 ? __switch_to_asm+0x34/0x70 ? wait_woken+0x80/0x80 ? __switch_to+0x85/0x410 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __schedule+0x3f2/0x6a0 kthread+0x105/0x140 ? io_submit_sqes+0x160/0x160 ? kthread+0x105/0x140 ? io_submit_sqes+0x160/0x160 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 which occurs because using a kernel side submission thread isn't valid without using fixed files (registered through io_uring_register()). This causes io_uring to put the request after logging an error, but before the file field is set in the request. If it happens to be non-zero, we attempt to fput() garbage. Fix this by ensuring that req->file is initialized when the request is allocated. Cc: stable@vger.kernel.org # 5.1+ Reported-by: NStephen Bates <sbates@raithlin.com> Tested-by: NStephen Bates <sbates@raithlin.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 13 6月, 2019 1 次提交
-
-
由 Eric Biggers 提交于
Opening and closing an io_uring instance leaks a UNIX domain socket inode. This is because the ->file of the io_uring instance's internal UNIX domain socket is set to point to the io_uring file, but then sock_release() sees the non-NULL ->file and assumes the inode reference is held by the file so doesn't call iput(). That's not the case here, since the reference is still meant to be held by the socket; the actual inode of the io_uring file is different. Fix this leak by NULL-ing out ->file before releasing the socket. Reported-by: syzbot+111cb28d9f583693aefa@syzkaller.appspotmail.com Fixes: 2b188cc1 ("Add io_uring IO interface") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 01 6月, 2019 2 次提交
-
-
由 Jens Axboe 提交于
We can encounter a short read when we're doing buffered reads and the data is partially cached. Right now we just return the short read, but that forces the application to read that CQE, then issue another SQE to finish the read. That read will not be cached, and hence will result in an async punt. It's more efficient to do that async punt from within the kernel, as that will the not need two round trips more to the kernel. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
Currently these functions return < 0 on error, and 0 for success. Change that so that we return < 0 on error, but number of bytes for success. Some callers already treat the return value that way, others need a slight tweak. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 26 5月, 2019 1 次提交
-
-
由 Pavel Begunkov 提交于
If io_copy_iov() fails, it will break the loop and report success, albeit partially completed operation. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 16 5月, 2019 4 次提交
-
-
由 Jackie Liu 提交于
The previous patch has ensured that io_cqring_events contain smp_rmb memory barriers, Now we can use wait_event_interruptible to keep the code simple. Signed-off-by: NJackie Liu <liuyun01@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jackie Liu 提交于
Whenever smp_rmb is required to use io_cqring_events, keep smp_rmb inside the function io_cqring_events. Signed-off-by: NJackie Liu <liuyun01@kylinos.cn> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Roman Penyaev 提交于
This fixes couple of races which lead to infinite wait of park completion with the following backtraces: [20801.303319] Call Trace: [20801.303321] ? __schedule+0x284/0x650 [20801.303323] schedule+0x33/0xc0 [20801.303324] schedule_timeout+0x1bc/0x210 [20801.303326] ? schedule+0x3d/0xc0 [20801.303327] ? schedule_timeout+0x1bc/0x210 [20801.303329] ? preempt_count_add+0x79/0xb0 [20801.303330] wait_for_completion+0xa5/0x120 [20801.303331] ? wake_up_q+0x70/0x70 [20801.303333] kthread_park+0x48/0x80 [20801.303335] io_finish_async+0x2c/0x70 [20801.303336] io_ring_ctx_wait_and_kill+0x95/0x180 [20801.303338] io_uring_release+0x1c/0x20 [20801.303339] __fput+0xad/0x210 [20801.303341] task_work_run+0x8f/0xb0 [20801.303342] exit_to_usermode_loop+0xa0/0xb0 [20801.303343] do_syscall_64+0xe0/0x100 [20801.303349] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [20801.303380] Call Trace: [20801.303383] ? __schedule+0x284/0x650 [20801.303384] schedule+0x33/0xc0 [20801.303386] io_sq_thread+0x38a/0x410 [20801.303388] ? __switch_to_asm+0x40/0x70 [20801.303390] ? wait_woken+0x80/0x80 [20801.303392] ? _raw_spin_lock_irqsave+0x17/0x40 [20801.303394] ? io_submit_sqes+0x120/0x120 [20801.303395] kthread+0x112/0x130 [20801.303396] ? kthread_create_on_node+0x60/0x60 [20801.303398] ret_from_fork+0x35/0x40 o kthread_park() waits for park completion, so io_sq_thread() loop should check kthread_should_park() along with khread_should_stop(), otherwise if kthread_park() is called before prepare_to_wait() the following schedule() never returns: CPU#0 CPU#1 io_sq_thread_stop(): io_sq_thread(): while(!kthread_should_stop() && !ctx->sqo_stop) { ctx->sqo_stop = 1; kthread_park() prepare_to_wait(); if (kthread_should_stop() { } schedule(); <<< nobody checks park flag, <<< so schedule and never return o if the flag ctx->sqo_stop is observed by the io_sq_thread() loop it is quite possible, that kthread_should_park() check and the following kthread_parkme() is never called, because kthread_park() has not been yet called, but few moments later is is called and waits there for park completion, which never happens, because kthread has already exited: CPU#0 CPU#1 io_sq_thread_stop(): io_sq_thread(): ctx->sqo_stop = 1; while(!kthread_should_stop() && !ctx->sqo_stop) { <<< observe sqo_stop and exit the loop } if (kthread_should_park()) kthread_parkme(); <<< never called, since was <<< never parked kthread_park() <<< waits forever for park completion In the current patch we quit the loop by only kthread_should_park() check (kthread_park() is synchronous, so kthread_should_stop() is never observed), and we abandon ->sqo_stop flag, since it is racy. At the end of the io_sq_thread() we unconditionally call parmke(), since we've exited the loop by the park flag. Signed-off-by: NRoman Penyaev <rpenyaev@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
We always pass in 0 for the cqe flags argument, since the support for "this read hit page cache" hint was dropped. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 15 5月, 2019 2 次提交
-
-
由 Jens Axboe 提交于
The test case we have is rightfully failing with the current kernel: io_uring_setup(1, 0x7ffe2cafebe0), flags: IORING_SETUP_SQPOLL|IORING_SETUP_SQ_AFF, resv: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000, sq_thread_cpu: 4 expected -1, got 3 This is in a vm, and CPU3 is the last valid one, hence asking for 4 should fail the setup with -EINVAL, not succeed. The problem is that we're using array_index_nospec() with nr_cpu_ids as the index, hence we wrap and end up using CPU0 instead of CPU4. This makes the setup succeed where it should be failing. We don't need to use array_index_nospec() as we're not indexing any array with this. Instead just compare with nr_cpu_ids directly. This is fine as we're checking with cpu_online() afterwards. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Ira Weiny 提交于
Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 5月, 2019 1 次提交
-
-
由 Stefan Bühler 提交于
When punting to workers the SQE gets copied after the initial try. There is a race condition between reading SQE data for the initial try and copying it for punting it to the workers. For example io_rw_done calls kiocb->ki_complete even if it was prepared for IORING_OP_FSYNC (and would be NULL). The easiest solution for now is to alway prepare again in the worker. req->file is safe to prepare though as long as it is checked before use. Signed-off-by: NStefan Bühler <source@stbuehler.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 10 5月, 2019 1 次提交
-
-
由 Roman Gushchin 提交于
Percpu reference counters should now be initialized with the PERCPU_REF_ALLOW_REINIT in order to allow switching them to the percpu mode from the atomic mode. This is exactly what percpu_ref_reinit() called from __io_uring_register() is supposed to do. So let's initialize percpu refcounters with the PERCU_REF_ALLOW_REINIT flag. Signed-off-by: NRoman Gushchin <guro@fb.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDennis Zhou <dennis@kernel.org>
-
- 07 5月, 2019 2 次提交
-
-
由 Shenghui Wang 提交于
This issue is found by running liburing/test/io_uring_setup test. When test run, the testcase "attempt to bind to invalid cpu" would not pass with messages like: io_uring_setup(1, 0xbfc2f7c8), \ flags: IORING_SETUP_SQPOLL|IORING_SETUP_SQ_AFF, \ resv: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000, \ sq_thread_cpu: 2 expected -1, got 3 FAIL On my system, there is: CPU(s) possible : 0-3 CPU(s) online : 0-1 CPU(s) offline : 2-3 CPU(s) present : 0-1 The sq_thread_cpu 2 is offline on my system, so the bind should fail. But cpu_possible() will pass the check. We shouldn't be able to bind to an offline cpu. Use cpu_online() to do the check. After the change, the testcase run as expected: EINVAL will be returned for cpu offlined. Reviewed-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NShenghui Wang <shhuiw@foxmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Colin Ian King 提交于
Currently variable ret is declared in a while-loop code block that shadows another variable ret. When an error occurs in the while-loop the error return in ret is not being set in the outer code block and so the error check on ret is always going to be checking on the wrong ret variable resulting in check that is always going to be true and a premature return occurs. Fix this by removing the declaration of the inner while-loop variable ret so that shadowing does not occur. Addresses-Coverity: ("'Constant' variable guards dead code") Fixes: 6b06314c ("io_uring: add file set registration") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 03 5月, 2019 4 次提交
-
-
由 Stefan Bühler 提交于
No need to set it in io_poll_add; io_poll_complete doesn't use it to set the result in the CQE. Signed-off-by: NStefan Bühler <source@stbuehler.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
Allow registration of an eventfd, which will trigger an event every time a completion event happens for this io_uring instance. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
This behaves just like sync_file_range(2) does. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
There are no ordering constraints between the submission and completion side of io_uring. But sometimes that would be useful to have. One common example is doing an fsync, for instance, and have it ordered with previous writes. Without support for that, the application must do this tracking itself. This adds a general SQE flag, IOSQE_IO_DRAIN. If a command is marked with this flag, then it will not be issued before previous commands have completed, and subsequent commands submitted after the drain will not be issued before the drain is started.. If there are no pending commands, setting this flag will not change the behavior of the issue of the command. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 02 5月, 2019 1 次提交
-
-
由 Mark Rutland 提交于
In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: NMark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 01 5月, 2019 3 次提交
-
-
由 Jens Axboe 提交于
If we don't end up actually calling submit in io_sq_wq_submit_work(), we still need to drop the submit reference to the request. If we don't, then we can leak the request. This can happen if we race with ring shutdown while flushing the workqueue for requests that require use of the mm_struct. Fixes: e65ef56d ("io_uring: use regular request ref counts") Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Mark Rutland 提交于
If io_allocate_scq_urings() fails to allocate an sq_* region, it will call io_mem_free() for any previously allocated regions, but leave dangling pointers to these regions in the ctx. Any regions which have not yet been allocated are left NULL. Note that when returning -EOVERFLOW, the previously allocated sq_ring is not freed, which appears to be an unintentional leak. When io_allocate_scq_urings() fails, io_uring_create() will call io_ring_ctx_wait_and_kill(), which calls io_mem_free() on all the sq_* regions, assuming the pointers are valid and not NULL. This can result in pages being freed multiple times, which has been observed to corrupt the page state, leading to subsequent fun. This can also result in virt_to_page() on NULL, resulting in the use of bogus page addresses, and yet more subsequent fun. The latter can be detected with CONFIG_DEBUG_VIRTUAL on arm64. Adding a cleanup path to io_allocate_scq_urings() complicates the logic, so let's leave it to io_ring_ctx_free() to consistently free these pointers, and simplify the io_allocate_scq_urings() error paths. Full splats from before this patch below. Note that the pointer logged by the DEBUG_VIRTUAL "non-linear address" warning has been hashed, and is actually NULL. [ 26.098129] page:ffff80000e949a00 count:0 mapcount:-128 mapping:0000000000000000 index:0x0 [ 26.102976] flags: 0x63fffc000000() [ 26.104373] raw: 000063fffc000000 ffff80000e86c188 ffff80000ea3df08 0000000000000000 [ 26.108917] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 26.137235] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) [ 26.143960] ------------[ cut here ]------------ [ 26.146020] kernel BUG at include/linux/mm.h:547! [ 26.147586] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 26.149163] Modules linked in: [ 26.150287] Process syz-executor.21 (pid: 20204, stack limit = 0x000000000e9cefeb) [ 26.153307] CPU: 2 PID: 20204 Comm: syz-executor.21 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #18 [ 26.156566] Hardware name: linux,dummy-virt (DT) [ 26.158089] pstate: 40400005 (nZcv daif +PAN -UAO) [ 26.159869] pc : io_mem_free+0x9c/0xa8 [ 26.161436] lr : io_mem_free+0x9c/0xa8 [ 26.162720] sp : ffff000013003d60 [ 26.164048] x29: ffff000013003d60 x28: ffff800025048040 [ 26.165804] x27: 0000000000000000 x26: ffff800025048040 [ 26.167352] x25: 00000000000000c0 x24: ffff0000112c2820 [ 26.169682] x23: 0000000000000000 x22: 0000000020000080 [ 26.171899] x21: ffff80002143b418 x20: ffff80002143b400 [ 26.174236] x19: ffff80002143b280 x18: 0000000000000000 [ 26.176607] x17: 0000000000000000 x16: 0000000000000000 [ 26.178997] x15: 0000000000000000 x14: 0000000000000000 [ 26.181508] x13: 00009178a5e077b2 x12: 0000000000000001 [ 26.183863] x11: 0000000000000000 x10: 0000000000000980 [ 26.186437] x9 : ffff000013003a80 x8 : ffff800025048a20 [ 26.189006] x7 : ffff8000250481c0 x6 : ffff80002ffe9118 [ 26.191359] x5 : ffff80002ffe9118 x4 : 0000000000000000 [ 26.193863] x3 : ffff80002ffefe98 x2 : 44c06ddd107d1f00 [ 26.196642] x1 : 0000000000000000 x0 : 000000000000003e [ 26.198892] Call trace: [ 26.199893] io_mem_free+0x9c/0xa8 [ 26.201155] io_ring_ctx_wait_and_kill+0xec/0x180 [ 26.202688] io_uring_setup+0x6c4/0x6f0 [ 26.204091] __arm64_sys_io_uring_setup+0x18/0x20 [ 26.205576] el0_svc_common.constprop.0+0x7c/0xe8 [ 26.207186] el0_svc_handler+0x28/0x78 [ 26.208389] el0_svc+0x8/0xc [ 26.209408] Code: aa0203e0 d0006861 9133a021 97fcdc3c (d4210000) [ 26.211995] ---[ end trace bdb81cd43a21e50d ]--- [ 81.770626] ------------[ cut here ]------------ [ 81.825015] virt_to_phys used for non-linear address: 000000000d42f2c7 ( (null)) [ 81.827860] WARNING: CPU: 1 PID: 30171 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x48/0x68 [ 81.831202] Modules linked in: [ 81.832212] CPU: 1 PID: 30171 Comm: syz-executor.20 Not tainted 5.1.0-rc7-00004-g7d30b2ea43d6 #19 [ 81.835616] Hardware name: linux,dummy-virt (DT) [ 81.836863] pstate: 60400005 (nZCv daif +PAN -UAO) [ 81.838727] pc : __virt_to_phys+0x48/0x68 [ 81.840572] lr : __virt_to_phys+0x48/0x68 [ 81.842264] sp : ffff80002cf67c70 [ 81.843858] x29: ffff80002cf67c70 x28: ffff800014358e18 [ 81.846463] x27: 0000000000000000 x26: 0000000020000080 [ 81.849148] x25: 0000000000000000 x24: ffff80001bb01f40 [ 81.851986] x23: ffff200011db06c8 x22: ffff2000127e3c60 [ 81.854351] x21: ffff800014358cc0 x20: ffff800014358d98 [ 81.856711] x19: 0000000000000000 x18: 0000000000000000 [ 81.859132] x17: 0000000000000000 x16: 0000000000000000 [ 81.861586] x15: 0000000000000000 x14: 0000000000000000 [ 81.863905] x13: 0000000000000000 x12: ffff1000037603e9 [ 81.866226] x11: 1ffff000037603e8 x10: 0000000000000980 [ 81.868776] x9 : ffff80002cf67840 x8 : ffff80001bb02920 [ 81.873272] x7 : ffff1000037603e9 x6 : ffff80001bb01f47 [ 81.875266] x5 : ffff1000037603e9 x4 : dfff200000000000 [ 81.876875] x3 : ffff200010087528 x2 : ffff1000059ecf58 [ 81.878751] x1 : 44c06ddd107d1f00 x0 : 0000000000000000 [ 81.880453] Call trace: [ 81.881164] __virt_to_phys+0x48/0x68 [ 81.882919] io_mem_free+0x18/0x110 [ 81.886585] io_ring_ctx_wait_and_kill+0x13c/0x1f0 [ 81.891212] io_uring_setup+0xa60/0xad0 [ 81.892881] __arm64_sys_io_uring_setup+0x2c/0x38 [ 81.894398] el0_svc_common.constprop.0+0xac/0x150 [ 81.896306] el0_svc_handler+0x34/0x88 [ 81.897744] el0_svc+0x8/0xc [ 81.898715] ---[ end trace b4a703802243cbba ]--- Fixes: 2b188cc1 ("Add io_uring IO interface") Signed-off-by: NMark Rutland <mark.rutland@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Mark Rutland 提交于
In io_sq_offload_start(), we call cpu_possible() on an unbounded cpu value from userspace. On v5.1-rc7 on arm64 with CONFIG_DEBUG_PER_CPU_MAPS, this results in a splat: WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpu_max_bits_warn include/linux/cpumask.h:121 [inline] There was an attempt to fix this in commit: 917257da ("io_uring: only test SQPOLL cpu after we've verified it") ... by adding a check after the cpu value had been limited to NR_CPU_IDS using array_index_nospec(). However, this left an unbound check at the start of the function, for which the warning still fires. Let's fix this correctly by checking that the cpu value is bound by nr_cpu_ids before passing it to cpu_possible(). Note that only nr_cpu_ids of a cpumask are guaranteed to exist at runtime, and nr_cpu_ids can be significantly smaller than NR_CPUs. For example, an arm64 defconfig has NR_CPUS=256, while my test VM has 4 vCPUs. Following the intent from the commit message for 917257da, the check is moved under the SQ_AFF branch, which is the only branch where the cpu values is consumed. The check is performed before bounding the value with array_index_nospec() so that we don't silently accept bogus cpu values from userspace, where array_index_nospec() would force these values to 0. I suspect we can remove the array_index_nospec() call entirely, but I've conservatively left that in place, updated to use nr_cpu_ids to match the prior check. Tested on arm64 with the Syzkaller reproducer: https://syzkaller.appspot.com/bug?extid=cd714a07c6de2bc34293 https://syzkaller.appspot.com/x/repro.syz?x=15d8b397200000 Full splat from before this patch: WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpu_max_bits_warn include/linux/cpumask.h:121 [inline] WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpumask_check include/linux/cpumask.h:128 [inline] WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 cpumask_test_cpu include/linux/cpumask.h:344 [inline] WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 io_sq_offload_start fs/io_uring.c:2244 [inline] WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 io_uring_create fs/io_uring.c:2864 [inline] WARNING: CPU: 1 PID: 27601 at include/linux/cpumask.h:121 io_uring_setup+0x1108/0x15a0 fs/io_uring.c:2916 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 27601 Comm: syz-executor.0 Not tainted 5.1.0-rc7 #3 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c cpu_max_bits_warn include/linux/cpumask.h:121 [inline] cpumask_check include/linux/cpumask.h:128 [inline] cpumask_test_cpu include/linux/cpumask.h:344 [inline] io_sq_offload_start fs/io_uring.c:2244 [inline] io_uring_create fs/io_uring.c:2864 [inline] io_uring_setup+0x1108/0x15a0 fs/io_uring.c:2916 __do_sys_io_uring_setup fs/io_uring.c:2929 [inline] __se_sys_io_uring_setup fs/io_uring.c:2926 [inline] __arm64_sys_io_uring_setup+0x50/0x70 fs/io_uring.c:2926 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: 917257da ("io_uring: only test SQPOLL cpu after we've verified it") Signed-off-by: NMark Rutland <mark.rutland@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Simplied the logic Signed-off-by: NJens Axboe <axboe@kernel.dk>
-