- 15 4月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Commit ef0658f3 changed precision from int to s8. There is existing kernel code that uses a larger precision. An example from the audit code: vsnprintf(...,..., " msg='%.1024s'", (char *)data); which overflows precision and truncates to nothing. Extending precision size fixes the audit system issue. Other changes: Change the size of the struct printf_spec.type from u16 to u8 so sizeof(struct printf_spec) stays as small as possible. Reorder the struct members so sizeof(struct printf_spec) remains 64 bits without alignment holes. Document the struct members a bit more. Original-patch-by: NEric Paris <eparis@redhat.com> Signed-off-by: NJoe Perches <joe@perches.com> Tested-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 4月, 2010 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: user.c, fix SNAPSHOT_SET_SWAP_AREA handling
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4: fix delegated locking NFS: Ensure that the WRITE and COMMIT RPC calls are always uninterruptible NFS: Fix a race with the new commit code NFS: Ensure that writeback_single_inode() calls write_inode() when syncing NFS: Fix the mode calculation in nfs_find_open_context NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Add some more commentary to __raw_local_irq_save() sparc64: Fix memory leak in pci_register_iommu_region(). sparc64: Add kmemleak annotation to sun4v_build_virq() sparc64: Support kmemleak. sparc64: Add function graph tracer support. sparc64: Give a stack frame to the ftrace call sites. sparc64: Use a seperate counter for timer interrupts and NMI checks, like x86. sparc64: Remove profiling from some low-level bits. sparc64: Kill unnecessary static on local var in ftrace_call_replace(). sparc64: Kill CONFIG_STACK_DEBUG code. sparc64: Add HAVE_FUNCTION_TRACE_MCOUNT_TEST and tidy up. sparc64: Adjust __raw_local_irq_save() to cooperate in NMIs. sparc64: Use kstack_valid() in die_if_kernel().
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) smc91c92_cs: define multicast_table as unsigned char can: avoids a false warning e1000e: stop cleaning when we reach tx_ring->next_to_use igb: restrict WoL for 82576 ET2 Quad Port Server Adapter virtio_net: missing sg_init_table Revert "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb" iwlwifi: need check for valid qos packet before free tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb udp: fix for unicast RX path optimization myri10ge: fix rx_pause in myri10ge_set_pauseparam net: corrected documentation for hardware time stamping stmmac: use resource_size() x.25 attempts to negotiate invalid throughput x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet. bridge: Fix IGMP3 report parsing cnic: Fix crash during bnx2x MTU change. qlcnic: fix set mac addr r6040: fix r6040_multicast_list vhost-net: fix vq_memory_access_ok error checking ath9k: fix double calls to ath_radio_enable ...
-
- 13 4月, 2010 35 次提交
-
-
由 Ken Kawasaki 提交于
smc91c92_cs: * define multicast_table as unsigned char * remove unnecessary "#ifndef final_version" Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
At this point optlen == sizeof(sfilter) but some compilers are dumb. Reported-by: Németh Márton <nm127@freemail.h Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Terry Loftin 提交于
Tx ring buffers after tx_ring->next_to_use are volatile and could change, possibly causing a crash. Stop cleaning when we hit tx_ring->next_to_use. Signed-off-by: NTerry Loftin <terry.loftin@hp.com> Acked-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Assmann 提交于
Restrict Wake-on-LAN to first port on 82576 ET2 quad port NICs, as it is only supported there. Signed-off-by: NStefan Assmann <sassmann@redhat.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Suggested by Peter Zijlstra Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: lib/Kconfig.debug
-
由 David S. Miller 提交于
Found by kmemleak. If request_resource() fails, we leak the struct resource we allocated to represent the IOMMU mapping area. This actually happens on sun4v machines because the IOMEM area is only reported sans the IOMMU region, unlike all previous systems. I'll need to fix that at some point, but for now fix the leak. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The only reference we store to this memory is in the form of a physical address, so kmemleak can't see it. Add a kmemleak_not_leak() annotation. It's probably useful to be able to look at a dump of these things either via debugfs or similar, and thus we could at some point store them in some kind of table and therefore get rid of this annotation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Only missing thing was an _sdata marker in vmlinux.lds.S Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It's the only way we'll be able to implement the function graph tracer properly. A positive is that we no longer have to worry about the linker over-optimizing the tail call, since we don't use a tail call any more. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This keeps us from having to use kstat_irqs_cpu() from the NMI handler, the former of which is a profiled function. Instead we use a currently empty slot in the cpu_data Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These include the timer implementation, perf events support, and the performance counter register (pcr) programming layer. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The generic stack tracer does this job just as well. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Check function_trace_stop at ftrace_caller Toss mcount_call and dummy call of ftrace_stub, unnecessary. Document problems we'll have if the final kernel image link ever turns on relaxation. Properly size 'ftrace_call' so it looks right when inspecting instructions under gdb et al. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
If we are in an NMI then doing a plain raw_local_irq_disable() will write PIL_NORMAL_MAX into %pil, which is lower than PIL_NMI, and thus we'll re-enable NMIs and recurse. Doing a simple: %pil = %pil | PIL_NORMAL_MAX does what we want, if we're already at PIL_NMI (15) we leave it at that setting, else we set it to PIL_NORMAL_MAX (14). This should get the function tracer working on sparc64. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This gets rid of a local function (is_kernel_stack()) which tries to do the same thing, yet poorly in that it doesn't handle IRQ stacks properly. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shirley Ma 提交于
Add missing sg_init_table for sg_set_buf in virtio_net which induced in defer skb patch. Reported-by: NThomas Müller <thomas@mathtm.de> Tested-by: NThomas Müller <thomas@mathtm.de> Signed-off-by: NShirley Ma <xma@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
* anonvma: anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma anon_vma: clone the anon_vma chain in the right order vma_adjust: fix the copying of anon_vma chains Simplify and comment on anon_vma re-use for anon_vma_prepare()
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits) ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock ARM: 6031/1: fix Thumb-2 decompressor ARM: 6029/1: ep93xx: gpio.c: local functions should be static ARM: 6028/1: ARM: add MAINTAINERS for U300 ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c MXC: mach_armadillo5x0: Add USB Host support. ARM mach-mx3: duplicated include ARM mach-mx3: duplicated include imx31: add watchdog device on litekit board. imx3: Add watchdog platform device support MXC: mach-mx31_3ds: add support for freescale mc13783 power management device. MXC: mach-mx31_3ds: Add SPI1 device support. MXC: mach-mx31_3ds: Add support for on board NAND Flash. MXC: mach-mx31_3ds: Update variable names over recent mach name modification. imx31: fix parent clock for rtc i.MX51: remove NFC AXI static mapping i.MX51: determine silicon revision dynamically i.MX51: map TZIC dynamically i.MX51: Use correct clock for gpt ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: make sure the chunk allocator doesn't create zero length chunks Btrfs: fix data enospc check overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix possible dq_flags corruption quota: Hide warnings about writes to the filesystem before quota was turned on ext3: symlink must be handled via filesystem specific operation ext2: symlink must be handled via filesystem specific operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: add speciffic ->setattr callback udf: potential integer overflow
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (36 commits) MIPS: Calculate proper ebase value for 64-bit kernels MIPS: Alchemy: DB1200: Remove custom wait implementation MIPS: Big Sur: Make defconfig more useful. MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules MIPS: Sibyte: Fix M3 TLB exception handler workaround. MIPS: BCM63xx: Fix build failure in board_bcm963xx.c MIPS: uasm: Add OR instruction. MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions. MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot. MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback MIPS: BCM63xx: Fix typo in cpu-feature-overrides file. MIPS: BCM63xx: Add support for second uart. MIPS: BCM63xx: Fix double gpio registration. MIPS: BCM63xx: Add DWVS0 board MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards. MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count MIPS: libgcc.h: Checkpatch cleanup MIPS: Loongson-2F: Flush the branch target history in BTB and RAS MIPS: Move signal trampolines off of the stack. MIPS: Preliminary VDSO ...
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: svcrdma: RDMA support not yet compatible with RPC6
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix typo "numer" -> "number" in alloc.c nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v() nilfs2: fix a wrong type conversion in nilfs_ioctl()
-
由 Linus Torvalds 提交于
Otherwise we might be mapping in a page in a new mapping, but that page (through the swapcache) would later be mapped into an old mapping too. The page->mapping must be the case that works for everybody, not just the mapping that happened to page it in first. Here's the scenario: - page gets allocated/mapped by process A. Let's call the anon_vma we associate the page with 'A' to keep it easy to track. - Process A forks, creating process B. The anon_vma in B is 'B', and has a chain that looks like 'B' -> 'A'. Everything is fine. - Swapping happens. The page (with mapping pointing to 'A') gets swapped out (perhaps not to disk - it's enough to assume that it's just not mapped any more, and lives entirely in the swap-cache) - Process B pages it in, which goes like this: do_swap_page -> page = lookup_swap_cache(entry); ... set_pte_at(mm, address, page_table, pte); page_add_anon_rmap(page, vma, address); And think about what happens here! In particular, what happens is that this will now be the "first" mapping of that page, so page_add_anon_rmap() used to do if (first) __page_set_anon_rmap(page, vma, address); and notice what anon_vma it will use? It will use the anon_vma for process B! What happens then? Trivial: process 'A' also pages it in (nothing happens, it's not the first mapping), and then process 'B' execve's or exits or unmaps, making anon_vma B go away. End result: process A has a page that points to anon_vma B, but anon_vma B does not exist any more. This can go on forever. Forget about RCU grace periods, forget about locking, forget anything like that. The bug is simply that page->mapping points to an anon_vma that was correct at one point, but was _not_ the one that was shared by all users of that possible mapping. Changing it to always use the deepest anon_vma in the anonvma chain gets us to the safest model. This can be improved in certain cases: if we know the page is private to just this particular mapping (for example, it's a new page, or it is the only swapcache entry), we could pick the top (most specific) anon_vma. But that's a future optimization. Make it _work_ reliably first. Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
We want to walk the chain in reverse order when cloning it, so that the order of the result chain will be the same as the order in the source chain. When we add entries to the chain, they go at the head of the chain, so we want to add the source head last. Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "No, it still oopses" ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
When we move the boundaries between two vma's due to things like mprotect, we need to make sure that the anon_vma of the pages that got moved from one vma to another gets properly copied around. And that was not always the case, in this rather hard-to-follow code sequence. Clarify the code, and fix it so that it copies the anon_vma from the right source. Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "Yeah, not so much this one either" ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This changes the anon_vma reuse case to require that we only reuse simple anon_vma's - ie the case when the vma only has a single anon_vma associated with it. This means that a reuse of an anon_vma from an adjacent vma will always guarantee that both vma's are associated not only with the same anon_vma, they will also have the same anon_vma chain (of just a single entry in this case). And since anon_vma re-use was the only case where the same anon_vma might be associated with different chains of anon_vma's, we now have the case that every vma that shares the same anon_vma will always also have the same chain. That makes it much easier to think about merging vma's that share the same anon_vma's: you can always just drop the other anon_vma chain in anon_vma_merge() since you know that they are always identical. This also splits up the function to validate the anon_vma re-use, and adds a lot of commentary about the possible races. Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "That didn't fix it" ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Perepechko 提交于
dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and atomically for example in mark_dquot_dirty or clear_dquot_dirty. Hence a change done by an atomic operation can be overwritten by a change done by a non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk. Signed-off-by: NAndrew Perepechko <andrew.perepechko@sun.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
For a root filesystem write to the filesystem before quota is turned on happens regularly and there's no way around it because of writes to syslog, /etc/mtab, and similar. So the warning is rather pointless for ordinary users. It's still useful during development so we just hide the warning behind __DQUOT_PARANOIA config option. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Dmitry Monakhov 提交于
generic setattr implementation is no longer responsible for quota transfer so synlinks must be handled via ext3_setattr. Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: NJan Kara <jack@suse.cz>
-