- 13 5月, 2019 2 次提交
-
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux由 Linus Torvalds 提交于
Pull MTD updates from Richard Weinberger: "MTD core changes: - New AFS partition parser - Update MAINTAINERS entry - Use of fall-throughs markers NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: - Switch to ->exec-op(). - meson: - Misc cleanups and fixes. - New OOB layout. - Sunxi: - A23/A33 NAND DMA support. - Ingenic: - Full reorganization and cleanup. - Clear separation between NAND controller and ECC engine. - Support JZ4740 an JZ4725B. - Denali: - Clear controller/chip separation. - ->exec_op() migration. - Various cleanups. - fsl_elbc: - Enable software ECC support. - Atmel: - Sam9x60 support. - GPMI: - Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes. SPI NOR core changes: - Print all JEDEC ID bytes on error - Fix comment of spi_nor_find_best_erase_type() - Add region locking flags for s25fl512s SPI NOR controller drivers changes: - intel-spi: - Avoid crossing 4K address boundary on read/write - Add support for Intel Comet Lake SPI serial flash" * tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits) mtd: part: fix incorrect format specifier for an unsigned long long mtd: lpddr_cmds: Mark expected switch fall-through mtd: phram: Mark expected switch fall-throughs mtd: cfi_cmdset_0002: Mark expected switch fall-throughs mtd: cfi_util: mark expected switch fall-throughs MAINTAINERS: MTD Git repository is hosted on kernel.org MAINTAINERS: Update jffs2 entry mtd: afs: add v2 partition parsing mtd: afs: factor the IIS read into partition parser mtd: afs: factor footer parsing into the v1 part parsing mtd: factor out v1 partition parsing mtd: afs: simplify partition detection mtd: afs: simplify partition parsing mtd: partitions: Add OF support to AFS partitions mtd: partitions: Add AFS partitions DT bindings mtd: afs: Move AFS partition parser to parsers subdir mtd: maps: Make uclinux_ram_map static mtd: maps: Allow MTD_PHYSMAP with MTD_RAM MAINTAINERS: Add myself as MTD maintainer MAINTAINERS: Remove my name from the MTD and NAND entries ...
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML updates from Richard Weinberger: - Kconfig cleanups - Fix cpu_all_mask() usage - Various bug fixes * tag 'for-linus-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: irq: don't set the chip for all irqs um: define set_pte_at() as a static inline function, not a macro um: remove uses of variable length arrays um: remove unused variable uml: fix a boot splat wrt use of cpu_all_mask um: Do not unlock mutex that is not hold. hostfs: fix mismatch between link_file definition and declaration arch: um: drivers: Kconfig: pedantic formatting arch: um: Kconfig: pedantic indention cleanups um: Revert to using stack for pt_regs in signal handling
-
- 12 5月, 2019 1 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC: - Add EC host command support using rpmsg - Add new CrOS USB PD logging driver - Transfer spi messages at high priority - Add support to trace CrOS EC commands - Minor fixes and cleanups in protocol and debugfs Wilco EC: - Standardize Wilco EC mailbox interface - Add h1_gpio status to debugfs" * tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_proto: Add trace event to trace EC commands platform/chrome: cros_ec_debugfs: Use cros_ec_cmd_xfer_status helper platform/chrome: cros_ec: Add EC host command support using rpmsg platform/chrome: wilco_ec: Add h1_gpio status to debugfs platform/chrome: wilco_ec: Standardize mailbox interface platform/chrome: cros_ec_proto: check for NULL transfer function platform/chrome: Add CrOS USB PD logging driver platform/chrome: cros_ec_spi: Transfer messages at high priority platform/chrome: cros_ec_debugfs: no need to check return value of debugfs_create functions platform/chrome: cros_ec_debugfs: Remove dev_warn when console log is not supported
-
- 11 5月, 2019 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull gpio updates from Linus Walleij: "This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit later than usual because I was ironing out my own mistakes. I'm holding some stuff back for the next kernel as a result, and this should be a healthy and well tested batch. Core changes: - The gpiolib MMIO driver has been enhanced to handle two direction registers, i.e. one register to set lines as input and one register to set lines as output. It turns out some silicon engineer thinks the ability to configure a line as input and output at the same time makes sense, this can be debated but includes a lot of analog electronics reasoning, and the registers are there and need to be handled consistently. Unsurprisingly, we enforce the lines to be either inputs or outputs in such schemes. - Send in the proper argument value to .set_config() dispatched to the pin control subsystem. Nobody used it before, now someone does, so fix it to work as expected. - The ACPI gpiolib portions can now handle pin bias setting (pull up or pull down). This has been in the ACPI spec for years and we finally have it properly integrated with Linux GPIOs. It was based on an observation from Andy Schevchenko that Thomas Petazzoni's changes to the core for biasing the PCA950x GPIO expander actually happen to fit hand-in-glove with what the ACPI core needed. Such nice synergies happen sometimes. New drivers: - A new driver for the Mellanox BlueField GPIO controller. This is using 64bit MMIO registers and can configure lines as inputs and outputs at the same time and after improving the MMIO library we handle it just fine. Interesting. - A new IXP4xx proper gpiochip driver with hierarchical interrupts should be coming in from the ARM SoC tree as well. Driver enhancements: - The PCA053x driver handles the CAT9554 GPIO expander. - The PCA053x driver handles the NXP PCAL6416 GPIO expander. - Wake-up support on PCA053x GPIO lines. - OMAP now does a nice asynchronous IRQ handling on wake-ups by letting everything wake up on edges, and this makes runtime PM work as expected too. Misc: - Several cleanups such as devres fixes. - Get rid of some languager comstructs that cause problems when compiling with LLVMs clang. - Documentation review and update" * tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits) gpio: Update documentation docs: gpio: convert docs to ReST and rename to *.rst gpio: sch: Remove write-only core_base gpio: pxa: Make two symbols static gpiolib: acpi: Respect pin bias setting gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper gpiolib: acpi: Set pin value, based on bias, more accurately gpiolib: acpi: Change type of dflags gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT gpiolib: Make use of enum gpio_lookup_flags consistent gpiolib: Indent entry values of enum gpio_lookup_flags gpio: pca953x: add support for pca6416 dt-bindings: gpio: pca953x: document the nxp,pca6416 gpio: pca953x: add pcal6416 to the of_device_id table gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup tracing: stop making gpio tracing configurable gpio: pca953x: Configure wake-up path when wake-up is enabled gpio: of: Optimize quirk checks gpio: mmio: Drop bgpio_dir_inverted ...
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO updates from Alex Williamson: - Improve dev_printk() usage (Bjorn Helgaas) - Fix issue with blocking in !TASK_RUNNING state while waiting for userspace to release devices (Farhan Ali) - Fix error path cleanup in nvlink setup (Greg Kurz) - mdev-core cleanups and fixes in preparation for more use cases (Parav Pandit) - Cornelia has volunteered as an official vfio reviewer (Cornelia Huck) * tag 'vfio-v5.2-rc1' of git://github.com/awilliam/linux-vfio: vfio: Add Cornelia Huck as reviewer vfio/mdev: Avoid inline get and put parent helpers vfio/mdev: Fix aborting mdev child device removal if one fails vfio/mdev: Follow correct remove sequence vfio/mdev: Avoid masking error code to EBUSY vfio/mdev: Drop redundant extern for exported symbols vfio/mdev: Removed unused kref vfio/mdev: Avoid release parent reference during error path vfio-pci/nvlink2: Fix potential VMA leak vfio: Fix WARNING "do not call blocking ops when !TASK_RUNNING" vfio: Use dev_printk() when possible
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull tomoyo updates from James Morris: "Fixes to enable fuzz testing, and a fix for calculating whether a filesystem is user-modifiable" * 'next-tomoyo2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tomoyo: Don't emit WARNING: string while fuzzing testing. tomoyo: Change pathname calculation for read-only filesystems. tomoyo: Check address length before reading address family tomoyo: Add a kernel config option for fuzzing testing.
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull xtensa updates from Max Filippov: - implement atomic operations using exclusive access Xtensa option operations - add support for Xtensa cores with memory protection unit (MPU) - clean up xtensa-specific kernel-only headers - fix error path in simdisk_setup * tag 'xtensa-20190510' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: implement initialize_cacheattr for MPU cores xtensa: add exclusive atomics support xtensa: clean up inline assembly in futex.h xtensa: replace variant/core.h with asm/core.h xtensa: drop ifdef __KERNEL__ from kernel-only headers xtensa: set proper error code for simdisk_setup() xtensa: fix incorrect fd close in error case of simdisk_setup()
-
由 Tetsuo Handa 提交于
Commit cff0e6c3ec3e6230 ("tomoyo: Add a kernel config option for fuzzing testing.") enabled the learning mode, but syzkaller is detecting any "WARNING:" string as a crash. Thus, disable TOMOYO's quota warning if built for fuzzing testing. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NJames Morris <jamorris@linux.microsoft.com>
-
由 Tetsuo Handa 提交于
Commit 5625f2e3 ("TOMOYO: Change pathname for non-rename()able filesystems.") intended to be applied to filesystems where the content is not controllable from the userspace (e.g. proc, sysfs, securityfs), based on an assumption that such filesystems do not support rename() operation. But it turned out that read-only filesystems also do not support rename() operation despite the content is controllable from the userspace, and that commit is annoying TOMOYO users who want to use e.g. squashfs as the root filesystem due to use of local name which does not start with '/'. Therefore, based on an assumption that filesystems which require the device argument upon mount() request is an indication that the content is controllable from the userspace, do not use local name if a filesystem does not support rename() operation but requires the device argument upon mount() request. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jamorris@linux.microsoft.com>
-
由 Tetsuo Handa 提交于
KMSAN will complain if valid address length passed to bind()/connect()/ sendmsg() is shorter than sizeof("struct sockaddr"->sa_family) bytes. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jamorris@linux.microsoft.com>
-
由 Tetsuo Handa 提交于
syzbot is reporting kernel panic triggered by memory allocation fault injection before loading TOMOYO's policy [1]. To make the fuzzing tests useful, we need to assign a profile other than "disabled" (no-op) mode. Therefore, let's allow syzbot to load TOMOYO's built-in policy for "learning" mode using a kernel config option. This option must not be enabled for kernels built for production system, for this option also disables domain/program checks when modifying policy configuration via /sys/kernel/security/tomoyo/ interface. [1] https://syzkaller.appspot.com/bug?extid=29569ed06425fcf67a95Reported-by: Nsyzbot <syzbot+e1b8084e532b6ee7afab@syzkaller.appspotmail.com> Reported-by: Nsyzbot <syzbot+29569ed06425fcf67a95@syzkaller.appspotmail.com> Reported-by: Nsyzbot <syzbot+2ee3f8974c2e7dc69feb@syzkaller.appspotmail.com> Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NJames Morris <jamorris@linux.microsoft.com>
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull more documentation updates from Jonathan Corbet: "Some late arriving documentation changes. In particular, this contains the conversion of the x86 docs to RST, which has been in the works for some time but needed a couple of final tweaks" * tag 'docs-5.2a' of git://git.lwn.net/linux: (29 commits) Documentation: x86: convert x86_64/machinecheck to reST Documentation: x86: convert x86_64/cpu-hotplug-spec to reST Documentation: x86: convert x86_64/fake-numa-for-cpusets to reST Documentation: x86: convert x86_64/5level-paging.txt to reST Documentation: x86: convert x86_64/mm.txt to reST Documentation: x86: convert x86_64/uefi.txt to reST Documentation: x86: convert x86_64/boot-options.txt to reST Documentation: x86: convert i386/IO-APIC.txt to reST Documentation: x86: convert usb-legacy-support.txt to reST Documentation: x86: convert orc-unwinder.txt to reST Documentation: x86: convert resctrl_ui.txt to reST Documentation: x86: convert microcode.txt to reST Documentation: x86: convert pti.txt to reST Documentation: x86: convert amd-memory-encryption.txt to reST Documentation: x86: convert intel_mpx.txt to reST Documentation: x86: convert protection-keys.txt to reST Documentation: x86: convert pat.txt to reST Documentation: x86: convert mtrr.txt to reST Documentation: x86: convert tlb.txt to reST Documentation: x86: convert zero-page.txt to reST ...
-
由 Linus Torvalds 提交于
Merge tag 'printk-for-5.2-fixes' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk fixup from Petr Mladek: "Replace the problematic probe_kernel_read() with original simple pointer checks in vsprintf()" * tag 'printk-for-5.2-fixes' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: vsprintf: Do not break early boot with probing addresses
-
由 Linus Torvalds 提交于
Pull pidfd fixes from Christian Brauner: "This fixes two bugs: - The first one reported by Linus whereby the pidfd-metadata binary was not placed in a .gitignore file. - The second one is rather urgent and fixes a locking issue found by syzkaller. What happened is that during process creation we need to check whether the cgroup we are in allows us to fork. To perform this check the cgroup needs to guard itself against threadgroup changes and takes a lock. Prior to CLONE_PIDFD the cleanup target "bad_fork_free_pid" would also need to release said lock. That's not true anymore since CLONE_PIDFD so this is fixed here. Syzkaller has tested the patch and was not able to reproduce the issue" * tag 'pidfd-fixes-v5.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: fork: do not release lock that wasn't taken samples: add .gitignore for pidfd-metadata
-
git://git.infradead.org/linux-platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Andy Shevchenko: "Gathered pile of patches for Platform Drivers x86. No surprises and no merge conflicts. Business as usual. Summary: - New driver of power button for Basin Cove PMIC. - ASUS WMI driver has got a Fn lock mode switch support. - Resolve a never end story with non working Wi-Fi on newer Lenovo Ideapad computers. Now the black list is replaced with white list. - New facility to debug S0ix failures on Intel Atom platforms. The Intel PMC and accompanying drivers are cleaned up. - Mellanox got a new TmFifo driver. Besides tachometer sensor and watchdog are enabled on Mellanox platforms. - The information of embedded controller is now recognized on new Thinkpads. Bluetooth driver on Thinkpads is blacklisted for some models. - Touchscreen DMI driver extended to support 'jumper ezpad 6 pro b' and Myria MY8307 2-in-1. - Additionally few small fixes here and there for WMI and ACPI laptop drivers. - The following is an automated git shortlog grouped by driver: - alienware-wmi: - printing the wrong error code - fix kfree on potentially uninitialized pointer - asus-wmi: - Add fn-lock mode switch support - dell-laptop: - fix rfkill functionality - dell-rbtn: - Add missing #include - ideapad-laptop: - Remove no_hw_rfkill_list - intel_pmc_core: - Allow to dump debug registers on S0ix failure - Convert to a platform_driver - Mark local function static - intel_pmc_ipc: - Don't map non-used optional resources - Apply same width for offset definitions - Use BIT() macro - adding error handling - intel_punit_ipc: - Revert "Fix resource ioremap warning" - mlx-platform: - Add mlx-wdt platform driver activation - Add support for tachometer speed register - Add TmFifo driver for Mellanox BlueField Soc - sony-laptop: - Fix unintentional fall-through - thinkpad_acpi: - cleanup for Thinkpad ACPI led - Mark expected switch fall-throughs - fix spelling mistake "capabilites" -> "capabilities" - Read EC information on newer models - Disable Bluetooth for some machines - touchscreen_dmi: - Add info for 'jumper ezpad 6 pro b' touchscreen - Add info for Myria MY8307 2-in-1" * tag 'platform-drivers-x86-v5.2-1' of git://git.infradead.org/linux-platform-drivers-x86: (26 commits) platform/x86: Add support for Basin Cove power button platform/x86: asus-wmi: Add fn-lock mode switch support platform/x86: ideapad-laptop: Remove no_hw_rfkill_list platform/x86: touchscreen_dmi: Add info for 'jumper ezpad 6 pro b' touchscreen platform/x86: thinkpad_acpi: cleanup for Thinkpad ACPI led platform/x86: thinkpad_acpi: Mark expected switch fall-throughs platform/x86: sony-laptop: Fix unintentional fall-through platform/x86: alienware-wmi: printing the wrong error code platform/x86: intel_pmc_core: Allow to dump debug registers on S0ix failure platform/x86: intel_pmc_core: Convert to a platform_driver platform/x86: mlx-platform: Add mlx-wdt platform driver activation platform/x86: mlx-platform: Add support for tachometer speed register platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc platform/x86: thinkpad_acpi: fix spelling mistake "capabilites" -> "capabilities" platform/x86: intel_punit_ipc: Revert "Fix resource ioremap warning" platform/x86: intel_pmc_ipc: Don't map non-used optional resources platform/x86: intel_pmc_ipc: Apply same width for offset definitions platform/x86: intel_pmc_ipc: Use BIT() macro platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer platform/x86: dell-laptop: fix rfkill functionality ...
-
git://github.com/bzolnier/linux由 Linus Torvalds 提交于
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "Four small fixes for fb core, updates for udlfb, sm712fb, macfb and atafb drivers. Redundant code removals from amba-clcd and atmel_lcdfb drivers. Minor fixes/cleanups for other fb drivers Detailed summary: - fix regression in fbcon logo handling on 'quiet' boots (Andreas Schwab) - fix divide-by-zero error in fb_var_to_videomode() (Shile Zhang) - fix 'WARNING in __alloc_pages_nodemask' bug (Jiufei Xue) - list all PCI memory BARs as conflicting apertures (Gerd Hoffmann) - update udlfb driver: fix sleeping inside spinlock, add mutex around rendering calls and remove redundant code (Mikulas Patocka) - update sm712fb driver: fix SM720 support related issues (Yifeng Li) - update macfb driver: fix DAFB colour table pointer initialization and remove redundant code (Finn Thain) - update atafb driver: fix kexec support, use dev_*() calls instead of printk() and remove obsolete module support (Geert Uytterhoeven) - add support to mxsfb driver for skipping display initialization for flicker-free display takeover from bootloader (Melchior Franz) - remove Versatile and Nomadik board families support from amba-clcd driver as they are handled by DRM driver nowadays (Linus Walleij) - remove no longer needed AVR and platform_data support from atmel_lcdfb driver (Alexandre Belloni) - misc fixes (Colin Ian King, Julia Lawall, Gustavo A. R. Silva, Aditya Pakki, Kangjie Lu, YueHaibing) - misc cleanups (Enrico Weigelt, Kefeng Wang)" * tag 'fbdev-v5.2' of git://github.com/bzolnier/linux: (38 commits) video: fbdev: Use dev_get_drvdata() fbcon: Don't reset logo_shown when logo is currently shown video: fbdev: atmel_lcdfb: remove set but not used variable 'pdata' video: fbdev: mxsfb: remove set but not used variable 'line_count' video: fbdev: pvr2fb: remove set but not used variable 'size' fbdev: fix WARNING in __alloc_pages_nodemask bug video: amba-clcd: Decomission Versatile and Nomadik fbdev: sm712fb: fix memory frequency by avoiding a switch/case fallthrough fbdev: fix divide error in fb_var_to_videomode fbdev: sm712fb: use 1024x768 by default on non-MIPS, fix garbled display fbdev: sm712fb: fix support for 1024x768-16 mode fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting fbdev: sm712fb: fix crashes during framebuffer writes by correctly mapping VRAM fbdev: sm712fb: fix boot screen glitch when sm712fb replaces VGA fbdev: sm712fb: fix VRAM detection, don't set SR70/71/74/75 fbdev: sm712fb: fix brightness control on reboot, don't set SR30 fbdev: sm712fb: fix white screen of death on reboot, don't set CR3B-CR3F video: imsttfb: fix potential NULL pointer dereferences video: hgafb: fix potential NULL pointer dereference fbdev: list all pci memory bars as conflicting apertures ...
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Nothing out of the ordinary this cycle. The bulk of this is a collection of fixes for existing drivers and some cleanups. There's one new driver for i.MX SoCs and addition of support for some new variants to existing drivers" * tag 'pwm/for-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: meson: Add clock source configuration for Meson G12A dt-bindings: pwm: Update bindings for the Meson G12A Family pwm: samsung: Don't uses devm_*() functions in ->request() pwm: Clear chip_data in pwm_put() pwm: Add i.MX TPM PWM driver support dt-bindings: pwm: Add i.MX TPM PWM binding pwm: imx27: Use devm_platform_ioremap_resource() to simplify code pwm: meson: Use the spin-lock only to protect register modifications pwm: meson: Don't disable PWM when setting duty repeatedly pwm: meson: Consider 128 a valid pre-divider pwm: sysfs: fix typo "its" -> "it's" pwm: tiehrpwm: Enable compilation for ARCH_K3 dt-bindings: pwm: tiehrpwm: Add TI AM654 SoC specific compatible pwm: tiehrpwm: Update shadow register for disabling PWMs pwm: img: Turn final 'else if' into 'else' in img_pwm_config pwm: Fix deadlock warning when removing PWM device
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox updates from Jassi Brar: - New driver: Armada 37xx mailbox controller - Misc: Use devm_ api for imx and platform_get_irq for stm32 * tag 'mailbox-v5.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Add support for Armada 37xx rWTM mailbox dt-bindings: mailbox: Document armada-3700-rwtm-mailbox binding mailbox: stm32-ipcc: check invalid irq mailbox: imx: use devm_platform_ioremap_resource() to simplify code
-
- 10 5月, 2019 22 次提交
-
-
由 Petr Mladek 提交于
The commit 3e5903eb ("vsprintf: Prevent crash when dereferencing invalid pointers") broke boot on several architectures. The common pattern is that probe_kernel_read() is not working during early boot because userspace access framework is not ready. It is a generic problem. We have to avoid any complex external functions in vsprintf() code, especially in the common path. They might break printk() easily and are hard to debug. Replace probe_kernel_read() with some simple checks for obvious problems. Details: 1. Report on Power: Kernel crashes very early during boot with with CONFIG_PPC_KUAP and CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG The problem is the combination of some new code called via printk(), check_pointer() which calls probe_kernel_read(). That then calls allow_user_access() (PPC_KUAP) and that uses mmu_has_feature() too early (before we've patched features). With the JUMP_LABEL debug enabled that causes us to call printk() & dump_stack() and we end up recursing and overflowing the stack. Because it happens so early you don't get any output, just an apparently dead system. The stack trace (which you don't see) is something like: ... dump_stack+0xdc probe_kernel_read+0x1a4 check_pointer+0x58 string+0x3c vsnprintf+0x1bc vscnprintf+0x20 printk_safe_log_store+0x7c printk+0x40 dump_stack_print_info+0xbc dump_stack+0x8 probe_kernel_read+0x1a4 probe_kernel_read+0x19c check_pointer+0x58 string+0x3c vsnprintf+0x1bc vscnprintf+0x20 vprintk_store+0x6c vprintk_emit+0xec vprintk_func+0xd4 printk+0x40 cpufeatures_process_feature+0xc8 scan_cpufeatures_subnodes+0x380 of_scan_flat_dt_subnodes+0xb4 dt_cpu_ftrs_scan_callback+0x158 of_scan_flat_dt+0xf0 dt_cpu_ftrs_scan+0x3c early_init_devtree+0x360 early_setup+0x9c 2. Report on s390: vsnprintf invocations, are broken on s390. For example, the early boot output now looks like this where the first (efault) should be the linux_banner: [ 0.099985] (efault) [ 0.099985] setup: Linux is running as a z/VM guest operating system in 64-bit mode [ 0.100066] setup: The maximum memory size is 8192MB [ 0.100070] cma: Reserved 4 MiB at (efault) [ 0.100100] numa: NUMA mode: (efault) The reason for this, is that the code assumes that probe_kernel_address() works very early. This however is not true on at least s390. Uaccess on KERNEL_DS works only after page tables have been setup on s390, which happens with setup_arch()->paging_init(). Any probe_kernel_address() invocation before that will return -EFAULT. Fixes: 3e5903eb ("vsprintf: Prevent crash when dereferencing invalid pointers") Link: http://lkml.kernel.org/r/20190510084213.22149-1-pmladek@suse.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "Tobin C . Harding" <me@tobin.cc> Cc: Michal Hocko <mhocko@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Russell Currey <ruscur@russell.cc> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stephen Rothwell <sfr@ozlabs.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-arch@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Petr Mladek <pmladek@suse.com> Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NPetr Mladek <pmladek@suse.com>
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc updates from Michael Ellerman: "Slightly delayed due to the issue with printk() calling probe_kernel_read() interacting with our new user access prevention stuff, but all fixed now. The only out-of-area changes are the addition of a cpuhp_state, small additions to Documentation and MAINTAINERS updates. Highlights: - Support for Kernel Userspace Access/Execution Prevention (like SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents the kernel from accidentally accessing userspace outside copy_to/from_user(), or ever executing userspace. - KASAN support on 32-bit. - Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to use the same address ranges we use with the Radix MMU. - A rewrite into C of large parts of our idle handling code for 64-bit Book3S (ie. power8 & power9). - A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup in the null_syscall benchmark. - On 64-bit bare metal we have support for recovering from errors with the time base (our clocksource), however if that fails currently we hang in __delay() and never crash. We now have support for detecting that case and short circuiting __delay() so we at least panic() and reboot. - Add support for optionally enabling the DAWR on Power9, which had to be disabled by default due to a hardware erratum. This has the effect of enabling hardware breakpoints for GDB, the downside is a badly behaved program could crash the machine by pointing the DAWR at cache inhibited memory. This is opt-in obviously. - xmon, our crash handler, gets support for a read only mode where operations that could change memory or otherwise disturb the system are disabled. Plus many clean-ups, reworks and minor fixes etc. Thanks to: Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Ben Hutchings, Bo YU, Breno Leitao, Cédric Le Goater, Christopher M. Riedl, Christoph Hellwig, Colin Ian King, David Gibson, Ganesh Goudar, Gautham R. Shenoy, George Spelvin, Greg Kroah-Hartman, Greg Kurz, Horia Geantă, Jagadeesh Pagadala, Joel Stanley, Joe Perches, Julia Lawall, Laurentiu Tudor, Laurent Vivier, Lukas Bulwahn, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith, Sukadev Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler, Valentin Schneider, Wei Yongjun, Wen Yang, YueHaibing" * tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (205 commits) powerpc/64s: Use early_mmu_has_feature() in set_kuap() powerpc/book3s/64: check for NULL pointer in pgd_alloc() powerpc/mm: Fix hugetlb page initialization ocxl: Fix return value check in afu_ioctl() powerpc/mm: fix section mismatch for setup_kup() powerpc/mm: fix redundant inclusion of pgtable-frag.o in Makefile powerpc/mm: Fix makefile for KASAN powerpc/kasan: add missing/lost Makefile selftests/powerpc: Add a signal fuzzer selftest powerpc/booke64: set RI in default MSR ocxl: Provide global MMIO accessors for external drivers ocxl: move event_fd handling to frontend ocxl: afu_irq only deals with IRQ IDs, not offsets ocxl: Allow external drivers to use OpenCAPI contexts ocxl: Create a clear delineation between ocxl backend & frontend ocxl: Don't pass pci_dev around ocxl: Split pci.c ocxl: Remove some unused exported symbols ocxl: Remove superfluous 'extern' from headers ocxl: read_pasid never returns an error, so make it void ...
-
由 Christian Brauner 提交于
Avoid calling cgroup_threadgroup_change_end() without having called cgroup_threadgroup_change_begin() first. During process creation we need to check whether the cgroup we are in allows us to fork. To perform this check the cgroup needs to guard itself against threadgroup changes and takes a lock. Prior to CLONE_PIDFD the cleanup target "bad_fork_free_pid" would also need to call cgroup_threadgroup_change_end() because said lock had already been taken. However, this is not the case anymore with the addition of CLONE_PIDFD. We are now allocating a pidfd before we check whether the cgroup we're in can fork and thus prior to taking the lock. So when copy_process() fails at the right step it would release a lock we haven't taken. This bug is not even very subtle to be honest. It's just not very clear from the naming of cgroup_threadgroup_change_{begin,end}() that a lock is taken. Here's the relevant splat: entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fec849 Code: 85 d2 74 02 89 0a 5b 5d c3 8b 04 24 c3 8b 14 24 c3 8b 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffed5a8c EFLAGS: 00000246 ORIG_RAX: 0000000000000078 RAX: ffffffffffffffda RBX: 0000000000003ffc RCX: 0000000000000000 RDX: 00000000200005c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(depth <= 0) WARNING: CPU: 1 PID: 7744 at kernel/locking/lockdep.c:4052 __lock_release kernel/locking/lockdep.c:4052 [inline] WARNING: CPU: 1 PID: 7744 at kernel/locking/lockdep.c:4052 lock_release+0x667/0xa00 kernel/locking/lockdep.c:4321 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 7744 Comm: syz-executor007 Not tainted 5.1.0+ #4 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:566 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:972 RIP: 0010:__lock_release kernel/locking/lockdep.c:4052 [inline] RIP: 0010:lock_release+0x667/0xa00 kernel/locking/lockdep.c:4321 Code: 0f 85 a0 03 00 00 8b 35 77 66 08 08 85 f6 75 23 48 c7 c6 a0 55 6b 87 48 c7 c7 40 25 6b 87 4c 89 85 70 ff ff ff e8 b7 a9 eb ff <0f> 0b 4c 8b 85 70 ff ff ff 4c 89 ea 4c 89 e6 4c 89 c7 e8 52 63 ff RSP: 0018:ffff888094117b48 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 1ffff11012822f6f RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815af236 RDI: ffffed1012822f5b RBP: ffff888094117c00 R08: ffff888092bfc400 R09: fffffbfff113301d R10: fffffbfff113301c R11: ffffffff889980e3 R12: ffffffff8a451df8 R13: ffffffff8142e71f R14: ffffffff8a44cc80 R15: ffff888094117bd8 percpu_up_read.constprop.0+0xcb/0x110 include/linux/percpu-rwsem.h:92 cgroup_threadgroup_change_end include/linux/cgroup-defs.h:712 [inline] copy_process.part.0+0x47ff/0x6710 kernel/fork.c:2222 copy_process kernel/fork.c:1772 [inline] _do_fork+0x25d/0xfd0 kernel/fork.c:2338 __do_compat_sys_x86_clone arch/x86/ia32/sys_ia32.c:240 [inline] __se_compat_sys_x86_clone arch/x86/ia32/sys_ia32.c:236 [inline] __ia32_compat_sys_x86_clone+0xbc/0x140 arch/x86/ia32/sys_ia32.c:236 do_syscall_32_irqs_on arch/x86/entry/common.c:334 [inline] do_fast_syscall_32+0x281/0xd54 arch/x86/entry/common.c:405 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fec849 Code: 85 d2 74 02 89 0a 5b 5d c3 8b 04 24 c3 8b 14 24 c3 8b 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffed5a8c EFLAGS: 00000246 ORIG_RAX: 0000000000000078 RAX: ffffffffffffffda RBX: 0000000000003ffc RCX: 0000000000000000 RDX: 00000000200005c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Reported-and-tested-by: syzbot+3286e58549edc479faae@syzkaller.appspotmail.com Fixes: b3e58382 ("clone: add CLONE_PIDFD") Signed-off-by: NChristian Brauner <christian@brauner.io>
-
由 Christian Brauner 提交于
Ignore the pidfd-metadata binary so it doesn't show up in unwanted scenarios. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NChristian Brauner <christian@brauner.io>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs mount fix from Al Viro: "Fix for umount -l/mount --move race caught by syzbot yesterday..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_move_mount(): fix an unsafe use of is_anon_ns()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Several bug fixes, many are quick merge-window regression cures: - When NLM_F_EXCL is not set, allow same fib rule insertion. From Hangbin Liu. - Several cures in sja1105 DSA driver (while loop exit condition fix, return of negative u8, etc.) from Vladimir Oltean. - Handle tx/rx delays in realtek PHY driver properly, from Serge Semin. - Double free in cls_matchall, from Pieter Jansen van Vuuren. - Disable SIOCSHWTSTAMP in macvlan/vlan containers, from Hangbin Liu. - Endainness fixes in aqc111, from Oliver Neukum. - Handle errors in packet_init properly, from Haibing Yue. - Various W=1 warning fixes in kTLS, from Jakub Kicinski" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) nfp: add missing kdoc net/tls: handle errors from padding_length() net/tls: remove set but not used variables docs/btf: fix the missing section marks nfp: bpf: fix static check error through tightening shift amount adjustment selftests: bpf: initialize bpf_object pointers where needed packet: Fix error path in packet_init net/tcp: use deferred jump label for TCP acked data hook net: aquantia: fix undefined devm_hwmon_device_register_with_info reference aqc111: fix double endianness swap on BE aqc111: fix writing to the phy on BE aqc111: fix endianness issue in aqc111_change_mtu vlan: disable SIOCSHWTSTAMP in container macvlan: disable SIOCSHWTSTAMP in container tipc: fix hanging clients using poll with EPOLLOUT flag tuntap: synchronize through tfiles array instead of tun->numqueues tuntap: fix dividing by zero in ebpf queue selection dwmac4_prog_mtl_tx_algorithms() missing write operation ptp_qoriq: fix NULL access if ptp dt node missing net/sched: avoid double free on matchall reoffload ...
-
由 Jakub Kicinski 提交于
Add missing kdoc for app member. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== net/tls: fix W=1 build warnings This small series cleans up two outstanding W=1 build warnings in tls code. Both are set but not used variables. The first case looks fairly straightforward. In the second I think it's better to propagate the error code, even if not doing some does not lead to a crash with current code. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
At the time padding_length() is called the record header is still part of the message. If malicious TLS 1.3 peer sends an all-zero record padding_length() will stop at the record header, and return full length of the data including the tail_size. Subsequent subtraction of prot->overhead_size from rxm->full_len will cause rxm->full_len to turn negative. skb accessors, however, will always catch resulting out-of-bounds operation, so in practice this fix comes down to returning the correct error code. It also fixes a set but not used warning. This code was added by commit 130b392c ("net: tls: Add tls 1.3 support"). CC: Dave Watson <davejwatson@fb.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Commit 4504ab0e ("net/tls: Inform user space about send buffer availability") made us report write_space regardless whether partial record push was successful or not. Remove the now unused return value to clean up the following W=1 warning: net/tls/tls_device.c: In function ‘tls_device_write_space’: net/tls/tls_device.c:546:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] int rc = 0; ^~ CC: Vakul Garg <vakul.garg@nxp.com> CC: Boris Pismenny <borisp@mellanox.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Alexei Starovoitov says: ==================== pull-request: bpf 2019-05-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) three small fixes from Gary, Jiong and Lorenz. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gary Lin 提交于
The section titles of 3.4 and 3.5 are not marked correctly. Signed-off-by: NGary Lin <glin@suse.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Jiong Wang 提交于
NFP shift instruction has something special. If shift direction is left then shift amount of 1 to 31 is specified as 32 minus the amount to shift. But no need to do this for indirect shift which has shift amount be 0. Even after we do this subtraction, shift amount 0 will be turned into 32 which will eventually be encoded the same as 0 because only low 5 bits are encoded, but shift amount be 32 will fail the FIELD_PREP check done later on shift mask (0x1f), due to 32 is out of mask range. Such error has been observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3. This issue has started when indirect shift support added after which the incoming shift amount to __emit_shf could be 0, therefore it is at that time shift amount adjustment inside __emit_shf should have been tightened. Fixes: 991f5b36 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)") Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Pablo Cascón <pablo.cascon@netronome.com Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NJiong Wang <jiong.wang@netronome.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lorenz Bauer 提交于
There are a few tests which call bpf_object__close on uninitialized bpf_object*, which may segfault. Explicitly zero-initialise these pointers to avoid this. Signed-off-by: NLorenz Bauer <lmb@cloudflare.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: "Here we go: - Fix various long standing issues in the sparc 32-bit IOMMU support code, from Christoph Hellwig. - Various other code cleanups and simplifications all over. From Gustavo A. R. Silva, Jagadeesh Pagadala, Masahiro Yamada, Mauro Carvalho Chehab, Mike Rapoport" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: simplify reduce_memory() function sparc: use struct_size() in kzalloc() docs: sparc: convert to ReST sparc/iommu: merge iommu_get_one and __sbus_iommu_map_page sparc/iommu: use __sbus_iommu_map_page to implement the map_sg path sparc/iommu: fix __sbus_iommu_map_page for highmem pages sparc/iommu: move per-page flushing into __sbus_iommu_map_page sparc/iommu: pass a physical address to iommu_get_one sparc/iommu: create a common helper for map_sg sparc/iommu: merge iommu_release_one and sbus_iommu_unmap_page sparc/iommu: use sbus_iommu_unmap_page in sbus_iommu_unmap_sg sparc/iommu: use !PageHighMem to check if a page has a kernel mapping sparc: vdso: add FORCE to the build rule of %.so arch:sparc:kernel/uprobes.c : Remove duplicate header
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk framework updates from Stephen Boyd: "We have a couple new features and changes in the core clk framework this time around because we've finally gotten around to fixing some long standing issues. There's still work to do though, so this pull request is largely laying down the foundation for all the driver changes to come in the next merge window. The first problem we're alleviating is how parents of clks are specified. With the new method, we should see lots of drivers migrate away from the current design of string comparisons on the entire clk tree to a more direct method where they can use clk_hw pointers or more localized names specified in DT or via clkdev. This should reduce our reliance on string comparisons for all the topology description logic that we've been using for years and hopefully speed some things up while avoiding problems we have with generating clk names. Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't really helping anyone and we introduced big-endian versions of the basic clk types so that we can get rid of clk_{readl,writel}(). Both of these are things that driver developers have tried to use over the years that I typically bat away during code reviews because they're not useful. It's great to see these two things go away so maintainers can save time not worrying about these things. On the driver side we got the usual collection of new SoC support and non-critical fixes and updates to existing code. The big topics that stand out are the new driver support for Mediatek MT8183 and MT8516 SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The other patches in the driver pile are mostly fixes for things that are being used for the first time or additions for clks that couldn't be tested before because there wasn't a consumer driver that exercised them. Details are below and also in the sub-maintainer tags. Core: - Remove clk_readl() and introduce BE versions of basic clk types - Rewrite how clk parents can be specified to allow DT/clkdev lookups - Removal of the CLK_IS_BASIC clk flag - Framework documentation updates and fixes New Drivers: - Support for STM32F769 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support - Support for Cirrus Logic Lochnagar clks Updates: - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Various static analysis fixes/finds and const markings - Video Engine (ECLK) support on Aspeed SoCs - Xilinx ZynqMP Versal platform support - Convert Xilinx ZynqMP driver to be struct oriented - Fixes for Rockchip rk3328 and rk3288 SoCs - Sub-type for Rockchip SoCs where mux and divider aren't a single register - Remove SNVS clock from i.MX7UPL clock driver and bindings - Improve i.MX5 clock driver for i.MX50 support - Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU) - Export a new clock for the MBUS controller on the A13 - Allwinner H6 fixes to support a finer clocking of the video and VPU engines - Add g12a support in the Amlogic axg audio clock controller - Add missing PCI USB clock on Rensas RZ/N1 - Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E - A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h> - VPU and Video Decoder clocks on Amlogic Meson8b - Finally remove the wrong ABP Meson8b clock id - Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A - Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller - Un-expose some Amlogic AXG-Audio input clocks IDs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits) clk: Cache core in clk_fetch_parent_index() without names clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset dt-bindings: clk: add documentation for the SiFive PRCI driver clk: stm32mp1: Add ddrperfm clock clk: Remove CLK_IS_BASIC clk flag clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull RTC updates from Alexandre Belloni: "A huge series from me this cycle. I went through many drivers to set the date and time range supported by the RTC which helps solving HW limitation when the time comes (as early as next year for some). This time, I focused on drivers using .set_mms and .set_mmss64, allowing me to remove those callbacks. About a third of the patches got reviews, I actually own the RTCs and I tested another third and the remaining one are unlikely to cause any issues. Other than that, a single new driver and the usual fixes here and there. Summary: Subsystem: - set_mmss and set_mmss64 rtc_ops removal - Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900 - Use SPDX identifier for the core - validate upper bound of tm->tm_year New driver: - Aspeed BMC SoC RTC Drivers: - abx80x: use rtc_add_group - ds3232: nvram support - pcf85063: add alarm, nvram, offset correction and microcrystal rv8263 support - x1205: add of_match_table - Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331, digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx, mxc, pcap, stmp3xxx, test, wm831x, xgene. - Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor, dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx, mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh, stmp3xxx, sun4v, tegra, wm831x, xgene. - Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that properly set the RTC range. - Use dev_get_drvdata instead of multiple indirections" * tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits) rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP rtc: imxdi: remove unused variable rtc: drop set_mms and set_mmss64 rtc: pcap: convert to SPDX identifier rtc: pcap: use .set_time rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: pcap: set range rtc: digicolor: convert to SPDX identifier rtc: digicolor: use .set_time rtc: digicolor: set range rtc: digicolor: fix possible race condition rtc: jz4740: convert to SPDX identifier rtc: jz4740: rework invalid time detection rtc: jz4740: use dev_pm_set_wake_irq() to simplify code rtc: jz4740: use .set_time rtc: jz4740: remove useless check rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: jz4740: set range rtc: 88pm860x: prevent use-after-free on device remove rtc: Use dev_get_drvdata() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: - API for late atomic transfers (e.g. to shut down via PMIC). We have a seperate callback now which is called under clearly defined conditions. In-kernel users are converted, too. - new driver for the AMD PCIe MP2 I2C controller - large refactoring for at91 and bcm-iproc (both gain slave support due to this) - and a good share of various driver improvements anf fixes * 'i2c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (57 commits) dt-bindings: i2c: riic: document r7s9210 support i2c: imx-lpi2c: Use __maybe_unused instead of #if CONFIG_PM_SLEEP i2c-piix4: Add Hygon Dhyana SMBus support i2c: core: apply 'is_suspended' check for SMBus, too i2c: core: ratelimit 'transfer when suspended' errors i2c: iproc: Change driver to use 'BIT' macro i2c: riic: Add Runtime PM support i2c: mux: demux-pinctrl: use struct_size() in devm_kzalloc() i2c: mux: pca954x: allow management of device idle state via sysfs i2c: mux: pca9541: remove support for unused platform data i2c: mux: pca954x: remove support for unused platform data dt-bindings: i2c: i2c-mtk: add support for MT8516 i2c: axxia: use auto cmd for last message i2c: gpio: flag atomic capability if possible i2c: algo: bit: add flag to whitelist atomic transfers i2c: stu300: use xfer_atomic callback to bail out early i2c: ocores: enable atomic xfers i2c: ocores: refactor setup for polling i2c: tegra-bpmp: convert to use new atomic callbacks i2c: omap: Add the master_xfer_atomic hook ...
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - Fall back to MDS if no deviceid is found rather than aborting # v4.11+ - NFS4: Fix v4.0 client state corruption when mount Features: - Much improved handling of soft mounts with NFS v4.0: - Reduce risk of false positive timeouts - Faster failover of reads and writes after a timeout - Added a "softerr" mount option to return ETIMEDOUT instead of EIO to the application after a timeout - Increase number of xprtrdma backchannel requests - Add additional xprtrdma tracepoints - Improved send completion batching for xprtrdma Other bugfixes and cleanups: - Return -EINVAL when NFS v4.2 is passed an invalid dedup mode - Reduce usage of GFP_ATOMIC pages in SUNRPC - Various minor NFS over RDMA cleanups and bugfixes - Use the correct container namespace for upcalls - Don't share superblocks between user namespaces - Various other container fixes - Make nfs_match_client() killable to prevent soft lockups - Don't mark all open state for recovery when handling recallable state revoked flag" * tag 'nfs-for-5.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (69 commits) SUNRPC: Rebalance a kref in auth_gss.c NFS: Fix a double unlock from nfs_match,get_client nfs: pass the correct prototype to read_cache_page NFSv4: don't mark all open state for recovery when handling recallable state revoked flag SUNRPC: Fix an error code in gss_alloc_msg() SUNRPC: task should be exit if encode return EKEYEXPIRED more times NFS4: Fix v4.0 client state corruption when mount PNFS fallback to MDS if no deviceid found NFS: make nfs_match_client killable lockd: Store the lockd client credential in struct nlm_host NFS: When mounting, don't share filesystems between different user namespaces NFS: Convert NFSv2 to use the container user namespace NFSv4: Convert the NFS client idmapper to use the container user namespace NFS: Convert NFSv3 to use the container user namespace SUNRPC: Use namespace of listening daemon in the client AUTH_GSS upcall SUNRPC: Use the client user namespace when encoding creds NFS: Store the credential of the mount process in the nfs_server SUNRPC: Cache cred of process creating the rpc_client xprtrdma: Remove stale comment xprtrdma: Update comments that reference ib_drain_qp ...
-
由 Mike Rapoport 提交于
The reduce_memory() function clampls the available memory to a limit defined by the "mem=" command line parameter. It takes into account the amount of already reserved memory and excludes it from the limit calculations. Rather than traverse memblocks and remove them by hand, use memblock_reserved_size() to account the reserved memory and memblock_enforce_memory_limit() to clamp the available memory. Signed-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup updates from Tejun Heo: "This includes Roman's cgroup2 freezer implementation. It's a separate machanism from cgroup1 freezer. Instead of blocking user tasks in arbitrary uninterruptible sleeps, the new implementation extends jobctl stop - frozen tasks are trapped in jobctl stop until thawed and can be killed and ptraced. Lots of thanks to Oleg for sheperding the effort. Other than that, there are a few trivial changes" * 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: never call do_group_exit() with task->frozen bit set kernel: cgroup: fix misuse of %x cgroup: get rid of cgroup_freezer_frozen_exit() cgroup: prevent spurious transition into non-frozen state cgroup: Remove unused cgrp variable cgroup: document cgroup v2 freezer interface cgroup: add tracing points for cgroup v2 freezer cgroup: make TRACE_CGROUP_PATH irq-safe kselftests: cgroup: add freezer controller self-tests kselftests: cgroup: don't fail on cg_kill_all() error in cg_destroy() cgroup: cgroup v2 freezer cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock cgroup: implement __cgroup_task_count() helper cgroup: rename freezer.c into legacy_freezer.c cgroup: remove extra cgroup_migrate_finish() call
-