Several fields were unused or were only set once. They have been
removed. Uncalled functions that relied on these constants have been
removed as well.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The mechanism by which the device is put into low power sleep is broken
in that the device can never come back out of low power mode afterwards.
Temorary fix to bring the device back out of sleep almost immediately,
until a suitable wake trigger can be found.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adding copyright notices and adding myself as a module author.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

set_mac is implemented, and there have been lots of new ethtool_ops added, so
removing the TODO to add more kernel parameters.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The error_timer was only getting initialised and an initial jiffies value set following a probe.
This could result in the timer needlessly expiring immediately after et131x_open is called.
Now this is all done from the open call instead.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added basic suspend & resume functionality.
Tested on an et1310 device, and putting Fedora15 host in and out of
hibernation successfully.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

adapter->bmsr is no longer being updated, but is also used to check the link state in places.

Remove bmsr from adapter, and replace link state checks with phydev->link check.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In several places in the code, the pm_csr register is read and the PHY_SW_COMA bit checked.

Move this check into its own small function to make the code more readable.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removing this as I'm pretty sure its not true, and alloc_etherdev isn't provided by this driver anyway. Alternatively, its a badly written comment and I don't understand it.

This drivers use of alloc_etherdev() is within keeping with other net devices, so I'm happy.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The message is in the wrong place. We definitely don't want to
return at this point, as we may need to turn off encryption.
Reported-by: NHenk de Groot <pe1dnn@amsat.org>
Signed-off-by: NDavid Kiroy <kilroyd@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function no longer compiles, so we just remove it.
Reported-by: NHenk de Groot <pe1dnn@amsat.org>
Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

in DBG machinery so you don't have to declare DBG_FUNC at
the start of all functions.

This just makes it easy to add DBG conforming to existing code.

The patch reformats the changed #defines to satisfy checkstyle.pl
Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of unnecessary comments.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that the mouse driver is functional, enable the auto-loading of the driver.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup  mousevsc_on_device_add().
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of mousevsc_on_receive_input_report() by inlining the code.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup all camel cased names.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now get rid of the machinery for managing the life-cycle of the mousevsc_dev
as this is not needed.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now, cleanup mousevsc_remove(). The mouse driver once initialized only
receives data from the host. So, by closing the channel first in the
unload path, we can properly deal with inflight packets. So, we don't need
the machinery for managing the life-cycle of the mousevsc_dev object.
Get rid of the unnecessary code.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of mousevsc_on_device_remove() by inlining code.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup mousevsc_connect_to_vsp(). There is no need to take reference on the
mousevsc device object when we are setting up the device. As part of this
cleanup get rid of get_input_device() as this function is only used here.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't need to handle the "send complete" callback - nothing needs to be done
here; get rid of the code.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup alloc_input_device(); you can directly set the reference count.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of the unused state: num_outstanding_req in struct mousevsc_dev.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Free all allocated memory in free_input_device().
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of unnecessary pr_* calls.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup error handling in this driver; use standard Linux error codes.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get rid of unnecessary DPRINT calls.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup and properly implement reportdesc_callback(); properly allocate the
hid_device and properly initialize the hid device structure.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use completion primitive to synchronize.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Correctly initialize the header size.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Handle the case where we may get bogus report desc size from the host.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Change the allocation flags to reflect interrupt context.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the bogus WARN_ON() calls.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The state maintained in struct input_device_context can easily be included
in the struct mousevsc_dev structure. Simplify the code by consolidating
the state.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This structure is protocol defined structure and must match the definition
on the host side. Make appropriate adjustments.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Unsuprisingly this symbol isn't defined on big endian systems.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

fixes these build problems:

drivers/staging/iio/adc/ad7746.c:345:8: error: 'S_IWUSR' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:436:8: error: 'S_IRUGO' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:681:19: error: 'THIS_MODULE' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:778:1: warning: data definition has no type or storage class [enabled by default]
drivers/staging/iio/adc/ad7746.c:778:1: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Wimplicit-int]
drivers/staging/iio/adc/ad7746.c:778:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/staging/iio/adc/ad7746.c:799:15: error: expected declaration specifiers or '...' before string constant
drivers/staging/iio/adc/ad7746.c:800:20: error: expected declaration specifiers or '...' before string constant
drivers/staging/iio/adc/ad7746.c:801:16: error: expected declaration specifiers or '...' before string constant
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

NVRAM contains a parameter that can disable N mode. This functionality
is not needed. As a consequence, brcms_c_protection_upd() could be
simplified.
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>