- 01 11月, 2018 39 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-10-31 This series contains a various collection of fixes. Miroslav Lichvar from Red Hat or should I say IBM now? Updates the PHC timecounter interval for igb so that it gets updated at least once every 550 seconds. Ngai-Mint provides a fix for fm10k to prevent a soft lockup or system crash by adding a new condition to determine if the SM mailbox is in the correct state before proceeding. Jake provides several fm10k fixes, first one marks complier aborts as non-fatal since on some platforms trigger machine check errors when the compile aborts. Added missing device ids to the in-kernel driver. Due to the recent fixes, bumped the driver version. I (Jeff Kirsher) fixed a XFRM_ALGO dependency for both ixgbe and ixgbevf. This fix was based on the original work from Arnd Bergmann, which only fixed ixgbe. Mitch provides a fix for i40e/avf to update the status codes, which resolves an issue between a mis-match between i40e and the iavf driver, which also supports the ice LAN driver. Radoslaw fixes the ixgbe where the driver is logging a message about spoofed packets detected when the VF is re-started with a different MAC address. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Daniel Borkmann says: ==================== pull-request: bpf 2018-11-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix tcp_bpf_recvmsg() to return -EAGAIN instead of 0 in non-blocking case when no data is available yet, from John. 2) Fix a compilation error in libbpf_attach_type_by_name() when compiled with clang 3.8, from Andrey. 3) Fix a partial copy of map pointer on scalar alu and remove id generation for RET_PTR_TO_MAP_VALUE return types, from Daniel. 4) Add unlimited memlock limit for kernel selftest's flow_dissector_load program, from Yonghong. 5) Fix ping for some BPF shell based kselftests where distro does not ship "ping -6" anymore, from Li. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
Daniel Borkmann says: ==================== The series contains two fixes in BPF core and test cases. For details please see individual patches. Thanks! ==================== Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Right now unprivileged tests are never executed as a BPF test run, only loaded. Allow for running them as well so that we can check the outcome and probe for regressions. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Add some more map related test cases to test_verifier kselftest to improve test coverage. Summary: 1012 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
In the verifier there is no such semantics where registers with PTR_TO_MAP_VALUE type have an id assigned to them. This is only used in PTR_TO_MAP_VALUE_OR_NULL and later on nullified once the test against NULL has been pattern matched and type transformed into PTR_TO_MAP_VALUE. Fixes: 3e6a4b3e ("bpf/verifier: introduce BPF_PTR_TO_MAP_VALUE") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Roman Gushchin <guro@fb.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
ALU operations on pointers such as scalar_reg += map_value_ptr are handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr and range in the register state share a union, so transferring state through dst_reg->range = ptr_reg->range is just buggy as any new map_ptr in the dst_reg is then truncated (or null) for subsequent checks. Fix this by adding a raw member and use it for copying state over to dst_reg. Fixes: f1174f77 ("bpf/verifier: rework value tracking") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Edward Cree <ecree@solarflare.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Andrey Ignatov 提交于
Arnaldo Carvalho de Melo reported build error in libbpf when clang version 3.8.1-24 (tags/RELEASE_381/final) is used: libbpf.c:2201:36: error: comparison of constant -22 with expression of type 'const enum bpf_attach_type' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (section_names[i].attach_type == -EINVAL) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~ 1 error generated. Fix the error by keeping "is_attachable" property of a program in a separate struct field instead of trying to use attach_type itself. Fixes: 956b620f ("libbpf: Introduce libbpf_attach_type_by_name") Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: NAndrey Ignatov <rdna@fb.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Li Zhijian 提交于
ping binary on some distros doesn't support "ping -6" anymore. Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 David S. Miller 提交于
Ido Schimmel says: ==================== mlxsw: Enable minimum shaper on MC TCs Petr says: An MC-aware mode was introduced in commit 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode, BUM traffic gets a special treatment by being assigned to a separate set of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then configured to strictly prioritize the lower-numbered ones. The intention is to prevent BUM traffic from flooding the switch and push out all UC traffic, which would otherwise happen, and instead give UC traffic precedence. However strictly prioritizing UC traffic has the effect that UC overload pushes out all BUM traffic, such as legitimate ARP queries. These packets are kept in queues for a while, but under sustained UC overload, their lifetime eventually expires and these packets are dropped. That is detrimental to network performance as well. In this patchset, MC TCs (8..15) are configured with minimum shaper of 200Mbps (a minimum permitted value) to allow a trickle of necessary control traffic to get through. First in patch #1, the QEEC register is extended with fields necessary to configure the minimum shaper. In patch #2, minimum shaper is enabled on TCs 8..15. In patches #3 and #4, first the MC-awareness test is tweaked to support the minimum shaper, and then a new test is introduced to test that MC traffic behaves well under UC overload. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
In a previous patch, mlxsw was updated to configure a minimum bandwidth allowance on MC TCs. Test that this indeed fixes the problem of UC traffic overload pushing out all MC traffic. Fixes: b5638d46 ("selftests: mlxsw: Add a test for UC behavior under MC flood") Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Since the minimum shaper is now being enabled for MC TCs, it's unreasonable to expect no UC traffic loss. Minimal min shaper value is 200Mbps, which is 20% of the 1Gbps that this test configures on egress. To cover for glitches, tolerate up to 25% UC degradation under MC overload. Fixes: b5638d46 ("selftests: mlxsw: Add a test for UC behavior under MC flood") Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
An MC-aware mode was introduced in commit 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode, BUM traffic gets a special treatment by being assigned to a separate set of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then configured to strictly prioritize the lower-numbered ones. The intention is to prevent BUM traffic from flooding the switch and push out all UC traffic, which would otherwise happen, and instead give UC traffic precedence. However strictly prioritizing UC traffic has the effect that UC overload pushes out all BUM traffic, such as legitimate ARP queries. These packets are kept in queues for a while, but under sustained UC overload, their lifetime eventually expires and these packets are dropped. That is detrimental to network performance as well. Therefore configure the MC TCs (8..15) with minimum shaper of 200Mbps (a minimum permitted value) to allow a trickle of necessary control traffic to get through. Fixes: 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable configuration of minimum shaper. Increase the QEEC length to 0x20 as well: that's the length that the register has had for a long time now, but with the configurations that mlxsw typically exercises, the firmware tolerated 0x1C-sized packets. With mise=true however, FW rejects packets unless they have the full required length. Fixes: b9b7cee4 ("mlxsw: reg: Add QoS ETS Element Configuration register") Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Huazhong Tan says: ==================== Bugfix for the HNS3 driver This patch series include bugfix for the HNS3 ethernet controller driver. Change log: V4->V5: Fixes comments from Joe Perches & Sergei Shtylyov V3->V4: Fixes comments from Sergei Shtylyov V2->V3: Fixes comments from Sergei Shtylyov V1->V2: Fixes the compilation break reported by kbuild test robot http://patchwork.ozlabs.org/patch/989818/ ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Since hclgevf_reset_wait() is used to wait for the hardware to complete the reset, it is not necessary to hold the rtnl_lock during hclgevf_reset_wait(). So this patch releases the lock for the duration of hclgevf_reset_wait(). Fixes: 6988eb2a ("net: hns3: Add support to reset the enet/ring mgmt layer") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Since hclge_reset_wait() is used to wait for the hardware to complete the reset, it is not necessary to hold the rtnl_lock during hclge_reset_wait(). So this patch releases the lock for the duration of hclge_reset_wait(). Fixes: 6d4fab39 ("net: hns3: Reset net device with rtnl_lock") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
In a multi-core machine, the mailbox service and reset service will be executed at the same time. The reset service will re-initialize the command queue, before that, the mailbox handler can only get some invalid messages. The HCLGE_STATE_CMD_DISABLE flag means that the command queue is not available and needs to be reinitialized. Therefore, when the mailbox handler recognizes this flag, it should not process the command. Fixes: dde1a86e ("net: hns3: Add mailbox support to PF driver") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
There are some functions that, when they fail to send the command, need to return the corresponding error value to its caller. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: 681ec399 ("net: hns3: fix for vlan table lost problem when resetting") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
When there is a PHY, the driver needs to complete some operations through MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from being sent during the hardware reset. Fixes: b50ae26c ("net: hns3: never send command queue message to IMP when reset) Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
The HEAD pointer of the hardware command queue maybe equal to the command queue's next_to_use in the driver, so that does not belong to the invalid HEAD pointer, since the hardware may not process the command in time, causing the HEAD pointer to be too late to update. The variables' name in this function is unreadable, so give them a more readable one. Fixes: 3ff50490 ("net: hns3: fix a dead loop in hclge_cmd_csq_clean") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
It is not necessary to reset the queue in the hns3_uninit_all_ring(), since the queue is stopped in the down operation, and will be reset in the up operation. And the judgment of the HCLGE_STATE_RST_HANDLING flag in the hclge_reset_tqp() is not correct, because we need to reset tqp during pf reset, otherwise it may cause queue not being reset to working state problem. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
The spin lock of the command queue only need to be initialized once when the driver initializes the command queue. It is not necessary to initialize the spin lock when resetting. At the same time, the modification of the queue member should be performed after acquiring the lock. Fixes: 3efb960f ("net: hns3: Refactor the initialization of command queue") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
The current driver supports handling two vector0 interrupts, reset and mailbox. When the hardware reports an interrupt of another type of interrupt source, if the driver does not process the interrupt, but enables the interrupt, the hardware will repeatedly report the unknown interrupt. Therefore, the driver enables the vector0 interrupt after clearing the known type of interrupt source. Other conditions are not enabled. Fixes: cd8c5c26 ("net: hns3: Fix for hclge_reset running repeatly problem") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
When hns3_get_ring_config()/hns3_queue_to_ring()/ hns3_get_vector_ring_chain() failed during resetting, the allocated memory has not been freed before these three functions return. So this patch adds error handler in these functions to fix it. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
When hns3_nic_init_vector_data() fails to map ring to vector, it should cancel the netif_napi_add() that has been successfully done and then exits. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As shown by Dmitris, we need to use csum_block_add() instead of csum_add() when adding the FCS contribution to skb csum. Before 4.18 (more exactly commit 88078d98 "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away, so RXFCS changes were ignored. Then before commit d55bef50 ("net: fix pskb_trim_rcsum_slow() with odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling each other. Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5. Note that this patch also rewrites mlx5e_get_fcs() to : - Use skb_header_pointer() instead of reinventing it. - Use __get_unaligned_cpu32() to avoid possible non aligned accesses as Dmitris pointed out. Fixes: 902a5459 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation") Reported-by: NPaweł Staszewski <pstaszewski@itcare.pl> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Eran Ben Elisha <eranbe@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Dimitris Michailidis <dmichail@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Paweł Staszewski <pstaszewski@itcare.pl> Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com> Tested-By: NMaria Pasechnik <mariap@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
The idx in vhost_vring_ioctl() was controlled by userspace, hence a potential exploitation of the Spectre variant 1 vulnerability. Fixing this by sanitizing idx before using it to index d->vqs. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bo YU 提交于
Fix a warning from checkpatch.pl:'please no space before tabs' in include/net/af_unix.h Signed-off-by: NBo YU <tsu.yubo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bo YU 提交于
Fix a warning from checkpatch: function definition argument 'struct sock *' should also have an identifier name in include/net/af_unix.h. Signed-off-by: NBo YU <tsu.yubo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in dev_err message Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Radoslaw Tyl 提交于
This change resolves a driver bug where the driver is logging a message that says "Spoofed packets detected". This can occur on the PF (host) when a VF has VLAN+MACVLAN enabled and is re-started with a different MAC address. MAC and VLAN anti-spoofing filters are to be enabled together. Signed-off-by: NRadoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Acked-by: NPiotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Add a few new status code which will be used by the ice driver, and rename a few to make them more consistent. Error code are mapped to similar values as in i40e_status.h, so as to be compatible with older VF drivers not using this status enum. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Based on the original work from Arnd Bergmann. When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a link error: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa': ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname' Simply selecting XFRM_ALGO from here causes circular dependencies, so to fix it, we probably want this slightly more complex solution that is similar to what other drivers with XFRM offload do: A separate Kconfig symbol now controls whether we include the IPsec offload code. To keep the old behavior, this is left as 'default y'. The dependency in XFRM_OFFLOAD still causes a circular dependency but is not actually needed because this symbol is not user visible, so removing that dependency on top makes it all work. CC: Arnd Bergmann <arnd@arndb.de> CC: Shannon Nelson <shannon.nelson@oracle.com> Fixes: eda0333a ("ixgbe: add VF IPsec management") Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
-
由 Jacob Keller 提交于
The upstream and out-of-tree drivers are once again at comparable functionality. It's been a while since we updated the upstream driver version, so bump it now. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
The device IDs for the Ethernet SDI Adapter devices were never added to the upstream driver. The IDs are already in the pci.ids database, and are supported by the out-of-tree driver. Add the device IDs now, so that the upstream driver can recognize and load these devices. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
VF drivers can trigger PCIe completer aborts any time they read a queue that they don't own. Even in nominal circumstances, it is not possible to prevent the VF driver from reading queues it doesn't own. VF drivers may attempt to read queues it previously owned, but which it no longer does due to a PF reset. Normally these completer aborts aren't an issue. However, on some platforms these trigger machine check errors. This is true even if we lower their severity from fatal to non-fatal. Indeed, we already have code for lowering the severity. We could attempt to mask these errors conditionally around resets, which is the most common time they would occur. However this would essentially be a race between the PF and VF drivers, and we may still occasionally see machine check exceptions on these strictly configured platforms. Instead, mask the errors entirely any time we resume VFs. By doing so, we prevent the completer aborts from being sent to the parent PCIe device, and thus these strict platforms will not upgrade them into machine check errors. Additionally, we don't lose any information by masking these errors, because we'll still report VFs which attempt to access queues via the FUM_BAD_VF_QACCESS errors. Without this change, on platforms where completer aborts cause machine check exceptions, the VF reading queues it doesn't own could crash the host system. Masking the completer abort prevents this, so we should mask it for good, and not just around a PCIe reset. Otherwise malicious or misconfigured VFs could cause the host system to crash. Because we are masking the error entirely, there is little reason to also keep setting the severity bit, so that code is also removed. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ngai-Mint Kwan 提交于
Current condition will always incorrectly report a full SM mailbox if an IES API application is not running. Due to this, the "fm10k_service_task" will be infinitely queued into the driver's workqueue. This, in turn, will cause a "kworker" thread to report 100% CPU utilization and might cause "soft lockup" events or system crashes. To fix this issue, a new condition is added to determine if the SM mailbox is in the correct state of FM10K_STATE_OPEN before proceeding. In other words, an instance of the IES API must be running. If there is, the remainder of the flow stays the same which is to determine if the SM mailbox capacity has been exceeded or not and take appropriate action. Signed-off-by: NNgai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Miroslav Lichvar 提交于
The timecounter needs to be updated at least once per ~550 seconds in order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old timestamp. Since commit 500462a9 ("timers: Switch to a non-cascading wheel"), scheduling of delayed work seems to be less accurate and a requested delay of 540 seconds may actually be longer than 550 seconds. Shorten the delay to 480 seconds to be sure the timecounter is updated in time. This fixes an issue with HW timestamps on 82580/I350/I354 being off by ~1100 seconds for few seconds every ~9 minutes. Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 31 10月, 2018 1 次提交
-
-
由 John Fastabend 提交于
We return 0 in the case of a nonblocking socket that has no data available. However, this is incorrect and may confuse applications. After this patch we do the correct thing and return the error EAGAIN. Quoting return codes from recvmsg manpage, EAGAIN or EWOULDBLOCK The socket is marked nonblocking and the receive operation would block, or a receive timeout had been set and the timeout expired before data was received. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-