Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a helper to check that the fsid parts of two file handles match.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The pnfs code will need it too.  Also remove the nfsd_ prefix to match the
other filehandle helpers in that file.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This (ab-)uses the file locking code to allow filesystems to recall
outstanding pNFS layouts on a file.  This new lease type is similar but
not quite the same as FL_DELEG.  A FL_LAYOUT lease can always be granted,
an a per-filesystem lock (XFS iolock for the initial implementation)
ensures not FL_LAYOUT leases granted when we would need to recall them.

Also included are changes that allow multiple outstanding read
leases of different types on the same file as long as they have a
differnt owner.  This wasn't a problem until now as nfsd never set
FL_LEASE leases, and no one else used FL_DELEG leases, but given that
nfsd will also issues FL_LAYOUT leases we will have to handle it now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Just like for other lock types we should allow different owners to have
a read lease on a file.  Currently this can't happen, but with the addition
of pNFS layout leases we'll need this feature.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This gives us a nice upper bound for later use in nfѕd.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Christoph's block pnfs patches have some minor dependencies on these
lock patches.

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The BKL is completely out of the picture in the lockd and sunrpc code
these days. Update the antiquated comments that refer to it.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Someone with a weird time_t happened to notice this, it shouldn't really
manifest till 2038.  It may not be our ownly year-2038 problem.
Reported-by: NAaron Pace <Aaron.Pace@alcatel-lucent.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>

We have each of the locks_remove_* variants doing this individually.
Have the caller do it instead, and have locks_remove_flock and
locks_remove_lease just assume that it's a valid pointer.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>

This makes things a bit more efficient in the cifs and ceph lock
pushing code.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Now that we use standard list_heads for tracking leases, we can have
lm_change take a pointer to the lease to be modified instead of a
double pointer.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Nothing uses it anymore. Also add a forward declaration for struct
file_lock to silence some compiler warnings that the removal triggers.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

There is only a single call site for each of these functions, and the
caller takes the i_lock prior to calling them and drops it just
afterward. Move the spinlocking into the functions instead.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

The current scheme of using the i_flock list is really difficult to
manage. There is also a legitimate desire for a per-inode spinlock to
manage these lists that isn't the i_lock.

Start conversion to a new scheme to eventually replace the old i_flock
list with a new "file_lock_context" object.

We start by adding a new i_flctx to struct inode. For now, it lives in
parallel with i_flock list, but will eventually replace it. The idea is
to allocate a structure to sit in that pointer and act as a locus for
all things file locking.

We allocate a file_lock_context for an inode when the first lock is
added to it, and it's only freed when the inode is freed. We use the
i_lock to protect the assignment, but afterward it should mostly be
accessed locklessly.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

...instead of open-coding it and removing flock locks directly. This
helps consolidate the flock lock removal logic into a single spot.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>

...that we can use to queue file_locks to per-ctx list_heads. Go ahead
and convert locks_delete_lock and locks_dispose_list to use it instead
of the fl_block list.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Pull fuse fixes from Miklos Szeredi:
 "This fixes a regression in the latest fuse update plus a fix for a
  rather theoretical memory ordering issue"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add memory barrier to INIT
  fuse: fix LOOKUP vs INIT compat handling

Pull fbdev fixes from Tomi Valkeinen:
 - broadsheetfb: fix memory leak
 - simplefb: fix build failure on sparc

* tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  fbdev/broadsheetfb: fix memory leak
  simplefb: Fix build failure on Sparc

Pull MMC bugfix from Ulf Hansson:
 "Fix sdhci regulator regression for Qualcomm and Nvidia boards"

* tag 'mmc-v3.19-4' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci: Set SDHCI_POWER_ON with external vmmc

Pull m68k fixlet from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up execveat

Pull powerpc fixes from Michael Ellerman:
 "A few powerpc fixes"

* tag 'powerpc-3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc: Work around gcc bug in current_thread_info()
  cxl: Fix issues when unmapping contexts
  powernv: Fix OPAL tracepoint code

Most NFS RPCs place their large payload argument at the end of the
RPC header (eg, NFSv3 WRITE). For NFSv3 WRITE and SYMLINK, RPC/RDMA
sends the complete RPC header inline, and the payload argument in
the read list. Data in the read list is the last part of the XDR
stream.

One important case is not like this, however. NFSv4 COMPOUND is a
counted array of operations. A WRITE operation, with its large data
payload, can appear in the middle of the compound's operations
array. Thus NFSv4 WRITE compounds can have header content after the
WRITE payload.

The Linux client, for example, performs an NFSv4 WRITE like this:

  { PUTFH, WRITE, GETATTR }

Though RFC 5667 is not precise about this, the proper way to convey
this compound is to place the GETATTR inline, _after_ the front of
the RPC header. The receiver inserts the read list payload into the
XDR stream after the initial WRITE arguments, and before the GETATTR
operation, thanks to the value of the read list "position" field.

The Linux client currently sends the GETATTR at the end of the
RPC/RDMA read list, which is incorrect. It will be corrected in the
future.

The Linux server currently rejects NFSv4 compounds with inline
content after the read list. For the above NFSv4 WRITE compound, the
NFS compound header indicates there are three operations, but the
server finds nonsense when it looks in the XDR stream for the third
operation, and the compound fails with OP_ILLEGAL.

Move trailing inline content to the end of the XDR buffer's page
list. This presents incoming NFSv4 WRITE compounds to NFSD in the
same way the socket transport does.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This is a pre-requisite for a subsequent patch.

Read list XDR round-up needs to be done _before_ additional inline
content is copied to the end of the XDR buffer's page list. Move
the logic added by commit e560e3b5 ("svcrdma: Add zero padding
if the client doesn't send it").
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Currently the Linux server can not decode RDMA_NOMSG type requests.
Operations whose length exceeds the fixed size of RDMA SEND buffers,
like large NFSv4 CREATE(NF4LNK) operations, must be conveyed via
RDMA_NOMSG.

For an RDMA_MSG type request, the client sends the RPC/RDMA, RPC
headers, and some or all of the NFS arguments via RDMA SEND.

For an RDMA_NOMSG type request, the client sends just the RPC/RDMA
header via RDMA SEND. The request's read list contains elements for
the entire RPC message, including the RPC header.

NFSD expects the RPC/RMDA header and RPC header to be contiguous in
page zero of the XDR buffer. Add logic in the RDMA READ path to make
the read list contents land where the server prefers, when the
incoming message is a type RDMA_NOMSG message.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

An RPC/RDMA client may send large RPC arguments via a read
list. This is a list of scatter/gather elements which convey
RPC call arguments too large to fit in a small RDMA SEND.

Each entry in the read list has a "position" field, whose value is
the byte offset in the XDR stream where the data in that entry is to
be inserted. Entries which share the same "position" value make up
the same RPC argument. The receiver inserts entries with the same
position field value in list order into the XDR stream.

Currently the Linux NFS/RDMA server cannot handle receiving read
chunks in more than one position, mostly because no current client
sends read lists with elements in more than one position. As a
sanity check, ensure that all received chunks have the same
"rc_position."
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The RDMA reader function doesn't change once an svcxprt_rdma is
instantiated. Instead of checking sc_devcap during every incoming
RPC, set the reader function once when the connection is accepted.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

xdr_start() can return the wrong rmsgp address if an assumption
about how the xdr_buf was constructed changes.  When it gets it
wrong, the client receives a reply that has gibberish in the
RPC/RDMA header, preventing it from matching a waiting RPC request.

Instead, make (and document) just one assumption: that the RDMA
header for the client's RPC call is at the start of the first page
in rq_pages.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Current convention is to avoid using BUG_ON() in places where an
oops could cause complete system failure.

Replace BUG_ON() call sites in svcrdma with an assertion error
message and allow execution to continue safely.

Some BUG_ON() calls are removed because they have never fired in
production (that we are aware of).

Some WARN_ON() calls are also replaced where a back trace is not
helpful; e.g., in a workqueue task.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The byte_count argument is not used, and the function is called
only from one place.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Nit: remove an unused variable to squelch a compiler warning.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Nit: Fix inconsistent white space in dprintk messages.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>