- 19 10月, 2013 15 次提交
-
-
由 Sony Chacko 提交于
When more than one NIC physical functions are enabled on a port, eSwitch on that port gets enabled automatically. Driver need not explicitly enable the eSwitch. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Update ethtool standard pause parameter settings and display Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
o Allow collecting the firmware dump of halted firmware when auto recovery is disabled. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
o Updated ethtool -d <ethX> option to display ring indices for Transmit(Tx), Receive(Rx), and Status(St) rings. o Updated ethtool -d <ethX> option to display ring interrupt mask for Transmit(Tx), and Status(St) rings. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect what is going on, and ease grep games. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jon Maloy says: ==================== Some small and relatively straightforward patches. With exception of the two first ones they are all unrelated and address minor issues. v2: update of v1 (http://patchwork.ozlabs.org/patch/277404/) -added commit to use memcpy_fromiovec on user data as per v1 feedback -updated sparse fix commit to drop chunks covered by above commit -added new commit that greatly simplifies the link lookup routine ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Hugne 提交于
When checking statistics or changing parameters on a link, the link_find_link function is used to locate the link with a given name. The complex method of deconstructing the name into local and remote address/interface is error prone and may fail if the interface names contains special characters. We change the lookup method to iterate over the list of nodes and compare the link names. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
link_cmd_set_value() takes commands for link, bearer and media related configuration. Genereally the function returns 0 when a command is recognized, and -EINVAL when it is not. However, in the switch for link related commands it returns 0 even when the command is unrecognized. This will sometimes make it look as if a failed configuration command has been successful, but has otherwise no negative effects. We remove this anomaly by returning -EINVAL even for link commands. We also rework all three switches to make them conforming to common kernel coding style. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Currently, rcv_msg() always returns zero on a packet delivery upcall from net_device. To make its behavior more compliant with the way this API should be used, we change this to let it return NET_RX_SUCCESS (which is zero anyway) when it is able to handle the packet, and NET_RX_DROP otherwise. The latter does not imply any functional change, it only enables the driver to keep more accurate statistics about the fate of delivered packets. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
tipc_block_bearer() currently takes a bearer name (const char*) as argument. This requires the function to make a lookup to find the pointer to the corresponding bearer struct. In the current code base this is not necessary, since the only two callers (tipc_continue(),recv_notification()) already have validated copies of this pointer, and hence can pass it directly in the function call. We change tipc_block_bearer() to directly take struct tipc_bearer* as argument instead. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
TIPC 'bearer' exists as an abstract concept, while 'media' is deemed a specific implementation of a bearer, such as Ethernet or Infiniband media. When a component inside TIPC wants to control a specific media, it only needs to access the generic bearer API to achieve this. However, in the current media implementations, the 'bearer' name is also extensively used in media specific function and variable names. This may create confusion, so we choose to replace the term 'bearer' with 'media' in all function names, variable names, and prefixes where this is what really is meant. Note that this change is cosmetic only, and no runtime behaviour changes are made here. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Eliminate below sparse warnings: net/tipc/link.c:1210:37: warning: cast removes address space of expression net/tipc/link.c:1218:59: warning: incorrect type in argument 2 (different address spaces) net/tipc/link.c:1218:59: expected void const [noderef] <asn:1>*from net/tipc/link.c:1218:59: got unsigned char const [usertype] *[assigned] sect_crs net/tipc/socket.c:341:49: warning: Using plain integer as NULL pointer net/tipc/socket.c:1371:36: warning: Using plain integer as NULL pointer net/tipc/socket.c:1694:57: warning: Using plain integer as NULL pointer Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NAndreas Bofjäll <andreas.bofjall@ericsson.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
tipc_msg_build() now copies message data from iovec to skb_buff using memcpy_fromiovecend(), which doesn't need to be passed the iovec length to perform the copying. So we remove the parameter indicating iovec length in all functions where TIPC messages are built and sent. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
tipc_msg_build() calls skb_copy_to_linear_data_offset() to copy data from user space to kernel space. However, the latter function does in its turn call memcpy() to perform the actual copying. This poses an obvious security and robustness risk, since memcpy() never makes any validity check on the pointer it is copying from. To correct this, we the replace the offending function call with a call to memcpy_fromiovecend(), which uses copy_from_user() to perform the copying. Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2013 25 次提交
-
-
由 Ben Hutchings 提交于
Macro definitions should not normally end with a semi-colon, as this makes it dangerous to use them an if...else statement. Happily this has not happened yet. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While working on virtio_net new allocation strategy to increase payload/truesize ratio, we found that refactoring sk_page_frag_refill() was needed. This patch splits sk_page_frag_refill() into two parts, adding skb_page_frag_refill() which can be used without a socket. While we are at it, add a minimum frag size of 32 for sk_page_frag_refill() Michael will either use netdev_alloc_frag() from softirq context, or skb_page_frag_refill() from process context in refill_work() (GFP_KERNEL allocations) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Michael Dalton <mwdalton@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jingoo Han says: ==================== net: ethernet: remove unnecessary pci_set_drvdata() part 1 Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound), the driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NDon Fry <pcnet32@frontier.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next由 David S. Miller 提交于
John W. Linville says: ==================== This is a batch of updates intended for the 3.13 stream... The biggest item of interest in here is wcn36xx, the new mac80211 driver for Qualcomm WCN3660/WCN3680 hardware. Regarding the mac80211 bits, Johannes says: "We have an assortment of cleanups and new features, of which the biggest one is probably the channel-switch support in IBSS. Nothing else really stands out much." On top of that, the ath9k and rt2x00 get a lot of update action from Felix Fietkau and Gabor Juhos, respectively. There are a handful of updates to other drivers here and there as well. Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Half of the rt_cache_stat fields are no longer used after IP route cache removal, lets shrink this per cpu area. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix (a few hundred) build errors due to missing semi-colon when KMEMCHECK is enabled: include/net/inet_timewait_sock.h:139:2: error: expected ',', ';' or '}' before 'int' include/net/inet_timewait_sock.h:148:28: error: 'const struct inet_timewait_sock' has no member named 'tw_death_node' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
xen-netback: IPv6 offload support ==================== This patch series adds support for checksum and large packet offloads into xen-netback. Testing has mainly been done using the Microsoft network hardware certification suite running in Server 2008R2 VMs with Citrix PV frontends. v2: - Fixed Wei's email address in Cc lines v3: - Responded to Wei's comments: - netif.h now updated with comments and a definition of XEN_NETIF_GSO_TYPE_NONE. - limited number of pullups - Responded to Annie's comments: - New GSO_BIT macro v4: - Responded to more of Wei's comments - Remove parsing of IPv6 fragment header and added warning v5: - Added comment concerning the value chosen for PKT_PROT_LEN - Dropped deprecation of feature-no-csum-offload ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
This patch adds code to handle SKB_GSO_TCPV6 skbs and construct appropriate extra or prefix segments to pass the large packet to the frontend. New xenstore flags, feature-gso-tcpv6 and feature-gso-tcpv6-prefix, are sampled to determine if the frontend is capable of handling such packets. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
This patch adds a xenstore feature flag, festure-gso-tcpv6, to advertise that netback can handle IPv6 TCP GSO packets. It creates SKB_GSO_TCPV6 skbs if the frontend passes an extra segment with the new type XEN_NETIF_GSO_TYPE_TCPV6 added to netif.h. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
There is no mechanism to insist that a guest always generates a packet with good checksum (at least for IPv4) so we must handle checksum offloading from the guest and hence should set NETIF_F_RXCSUM. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-