- 27 6月, 2015 20 次提交
-
-
由 Stephen Rothwell 提交于
Caused by commit 843735b7 ("power: axp288_charger: axp288 charger driver") from the battery tree interacting with commit 046050f6 ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") from the extcon tree. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf由 Linus Torvalds 提交于
Pull dma-buf updates from Sumit Semwal: "Minor changes for 4.2 - add ref-counting for kernel modules as exporters - minor code style fixes" * tag 'dma-buf-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: dma-buf: Minor coding style fixes dma-buf: add ref counting for module as exporter
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver updates from Greg KH: "Here's the tty and serial driver patches for 4.2-rc1. A number of individual driver updates, some code cleanups, and other minor things, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits) Doc: serial-rs485.txt: update RS485 driver interface Doc: tty.txt: remove mention of the BKL MAINTAINERS: tty: add serial docs directory serial: sprd: check for NULL after calling devm_clk_get serial: 8250_pci: Correct uartclk for xr17v35x expansion chips serial: 8250_pci: Add support for 12 port Exar boards serial: 8250_uniphier: add bindings document for UniPhier UART serial: core: cleanup in uart_get_baud_rate() serial: stm32-usart: Add STM32 USART Driver tty/serial: kill off set_irq_flags usage tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver updates from Greg KH: "Here's the big, really big, staging tree patches for 4.2-rc1. Loads of stuff in here, almost all just coding style fixes / churn, and a few new drivers as well, one of which I just disabled from the build a few minutes ago due to way too many build warnings. Other than the one "disable this driver" patch, all of these have been in linux-next for quite a while with no reported issues" * tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits) staging: wilc1000: disable driver due to build warnings Staging: rts5208: fix CHANGE_LINK_STATE value Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs Staging: sm750fb: modedb.h: Shorten lines to under 80 characters Staging: sm750fb: modedb.h: Replace spaces with tabs staging: comedi: addi_apci_3120: rename 'this_board' variables staging: comedi: addi_apci_1516: rename 'this_board' variables staging: comedi: ni_atmio: cleanup ni_getboardtype() staging: comedi: vmk80xx: sanity check context used to get the boardinfo staging: comedi: vmk80xx: rename 'boardinfo' variables staging: comedi: dt3000: rename 'this_board' variables staging: comedi: adv_pci_dio: rename 'this_board' variables staging: comedi: cb_pcidas64: rename 'thisboard' variables staging: comedi: cb_pcidas: rename 'thisboard' variables staging: comedi: me4000: rename 'thisboard' variables ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core updates from Greg KH: "Here is the driver core / firmware changes for 4.2-rc1. A number of small changes all over the place in the driver core, and in the firmware subsystem. Nothing really major, full details in the shortlog. Some of it is a bit of churn, given that the platform driver probing changes was found to not work well, so they were reverted. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) Revert "base/platform: Only insert MEM and IO resources" Revert "base/platform: Continue on insert_resource() error" Revert "of/platform: Use platform_device interface" Revert "base/platform: Remove code duplication" firmware: add missing kfree for work on async call fs: sysfs: don't pass count == 0 to bin file readers base:dd - Fix for typo in comment to function driver_deferred_probe_trigger(). base/platform: Remove code duplication of/platform: Use platform_device interface base/platform: Continue on insert_resource() error base/platform: Only insert MEM and IO resources firmware: use const for remaining firmware names firmware: fix possible use after free on name on asynchronous request firmware: check for file truncation on direct firmware loading firmware: fix __getname() missing failure check drivers: of/base: move of_init to driver_init drivers/base: cacheinfo: fix annoying typo when DT nodes are absent sysfs: disambiguate between "error code" and "failure" in comments driver-core: fix build for !CONFIG_MODULES driver-core: make __device_attach() static ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include <linux/sizes.h> extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing updates from Steven Rostedt: "This patch series contains several clean ups and even a new trace clock "monitonic raw". Also some enhancements to make the ring buffer even faster. But the biggest and most noticeable change is the renaming of the ftrace* files, structures and variables that have to deal with trace events. Over the years I've had several developers tell me about their confusion with what ftrace is compared to events. Technically, "ftrace" is the infrastructure to do the function hooks, which include tracing and also helps with live kernel patching. But the trace events are a separate entity altogether, and the files that affect the trace events should not be named "ftrace". These include: include/trace/ftrace.h -> include/trace/trace_events.h include/linux/ftrace_event.h -> include/linux/trace_events.h Also, functions that are specific for trace events have also been renamed: ftrace_print_*() -> trace_print_*() (un)register_ftrace_event() -> (un)register_trace_event() ftrace_event_name() -> trace_event_name() ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled() ftrace_define_fields_##call() -> trace_define_fields_##call() ftrace_get_offsets_##call() -> trace_get_offsets_##call() Structures have been renamed: ftrace_event_file -> trace_event_file ftrace_event_{call,class} -> trace_event_{call,class} ftrace_event_buffer -> trace_event_buffer ftrace_subsystem_dir -> trace_subsystem_dir ftrace_event_raw_##call -> trace_event_raw_##call ftrace_event_data_offset_##call-> trace_event_data_offset_##call ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call And a few various variables and flags have also been updated. This has been sitting in linux-next for some time, and I have not heard a single complaint about this rename breaking anything. Mostly because these functions, variables and structures are mostly internal to the tracing system and are seldom (if ever) used by anything external to that" * tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) ring_buffer: Allow to exit the ring buffer benchmark immediately ring-buffer-benchmark: Fix the wrong type ring-buffer-benchmark: Fix the wrong param in module_param ring-buffer: Add enum names for the context levels ring-buffer: Remove useless unused tracing_off_permanent() ring-buffer: Give NMIs a chance to lock the reader_lock ring-buffer: Add trace_recursive checks to ring_buffer_write() ring-buffer: Allways do the trace_recursive checks ring-buffer: Move recursive check to per_cpu descriptor ring-buffer: Add unlikelys to make fast path the default tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call() tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call() tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled() tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_* tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir tracing: Rename ftrace_event_name() to trace_event_name() tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: "This isn't my 4.2 pull request (yet). I found a few more bugs that I would have sent to fix 4.1, but since 4.1 is already out, I'm sending this before sending my 4.2 request (which is ready to go). After fixing the previous filter issue reported by Vince Weaver, I could not come up with a situation where the operand counter (cnt) could go below zero, so I added a WARN_ON_ONCE(cnt < 0). Vince was able to trigger that warn on with his fuzzer test, but didn't have a filter input that caused it. Later, Sasha Levin was able to trigger that same warning, and was able to give me the filter string that triggered it. It was simply a single operation ">". I wrapped the filtering code in a userspace program such that I could single step through the logic. With a single operator the operand counter can legitimately go below zero, and should be reported to the user as an error, but should not produce a kernel warning. The WARN_ON_ONCE(cnt < 0) should be just a "if (cnt < 0) break;" and the code following it will produce the error message for the user. While debugging this, I found that there was another bug that let the pointer to the filter string go beyond the filter string. This too was fixed. Finally, there was a typo in a stub function that only gets compiled if trace events is disabled but tracing is enabled (I'm not even sure that's possible)" * tag 'trace-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix typo from "static inlin" to "static inline" tracing/filter: Do not allow infix to exceed end of string tracing/filter: Do not WARN on operand count going below zero
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.2. I've one other new driver from freescale on my radar, it's been posted and reviewed, I'd just like to get someone to give it a last look, so maybe I'll send it or maybe I'll leave it. There is no major nouveau changes in here, Ben was working on something big, and we agreed it was a bit late, there wasn't anything else he considered urgent to merge. There might be another msm pull for some bits that are waiting on arm-soc, I'll see how we time it. This touches some "of" stuff, acks are in place except for the fixes to the build in various configs,t hat I just applied. Summary: New drivers: - virtio-gpu: KMS only pieces of driver for virtio-gpu in qemu. This is just the first part of this driver, enough to run unaccelerated userspace on. As qemu merges more we'll start adding the 3D features for the virgl 3d work. - amdgpu: a new driver from AMD to driver their newer GPUs. (VI+) It contains a new cleaner userspace API, and is a clean break from radeon moving forward, that AMD are going to concentrate on. It also contains a set of register headers auto generated from AMD internal database. core: - atomic modesetting API completed, enabled by default now. - Add support for mode_id blob to atomic ioctl to complete interface. - bunch of Displayport MST fixes - lots of misc fixes. panel: - new simple panels - fix some long-standing build issues with bridge drivers radeon: - VCE1 support - add a GPU reset counter for userspace - lots of fixes. amdkfd: - H/W debugger support module - static user-mode queues - support killing all the waves when a process terminates - use standard DECLARE_BITMAP i915: - Add Broxton support - S3, rotation support for Skylake - RPS booting tuning - CPT modeset sequence fixes - ns2501 dither support - enable cmd parser on haswell - cdclk handling fixes - gen8 dynamic pte allocation - lots of atomic conversion work exynos: - Add atomic modesetting support - Add iommu support - Consolidate drm driver initialization - and MIC, DECON and MIPI-DSI support for exynos5433 omapdrm: - atomic modesetting support (fixes lots of things in rewrite) tegra: - DP aux transaction fixes - iommu support fix msm: - adreno a306 support - various dsi bits - various 64-bit fixes - NV12MT support rcar-du: - atomic and misc fixes sti: - fix HDMI timing complaince tilcdc: - use drm component API to access tda998x driver - fix module unloading qxl: - stability fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits) drm/nouveau: Pause between setting gpu to D3hot and cutting the power drm/dp/mst: close deadlock in connector destruction. drm: Always enable atomic API drm/vgem: Set unique to "vgem" of: fix a build error to of_graph_get_endpoint_by_regs function drm/dp/mst: take lock around looking up the branch device on hpd irq drm/dp/mst: make sure mst_primary mstb is valid in work function of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' drm/atomic: Don't set crtc_state->enable manually drm/exynos: dsi: do not set TE GPIO direction by input drm/exynos: dsi: add support for MIC driver as a bridge drm/exynos: dsi: add support for Exynos5433 drm/exynos: dsi: make use of array for clock access drm/exynos: dsi: make use of driver data for static values drm/exynos: dsi: add macros for register access drm/exynos: dsi: rename pll_clk to sclk_clk drm/exynos: mic: add MIC driver of: add helper for getting endpoint node of specific identifiers drm/exynos: add Exynos5433 decon driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: "Apologies for not pressing this request-based DM partial completion issue further, it was an oversight on my part. We'll have to get it fixed up properly and revisit for a future release. - Revert block and DM core changes the removed request-based DM's ability to handle partial request completions -- otherwise with the current SCSI LLDs these changes could lead to silent data corruption. - Fix two DM version bumps that were missing from the initial 4.2 DM pull request (enabled userspace lvm2 to know certain changes have been made)" * tag 'dm-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache policy smq: fix "default" version to be 1.4.0 dm: bump the ioctl version to 4.32.0 Revert "block, dm: don't copy bios for request clones" Revert "dm: do not allocate any mempools for blk-mq request-based DM"
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - move -O0 jitterentropy code into its own file instead of using gcc pragma magic. - kill testmgr warning for gcm-aes-aesni. - fix build failure in old rsa. Other minor fixes: - ignore asn1 files generated by new rsa. - remove unnecessary kzfree NULL checks in jitterentropy. - typo fix in akcipher" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: rsa - add .gitignore for crypto/*.-asn1.[ch] files crypto: asymmetric_keys/rsa - Use non-conflicting variable name crypto: testmgr - don't print info about missing test for gcm-aes-aesni crypto: jitterentropy - Delete unnecessary checks before the function call "kzfree" crypto: akcipher - fix spelling cihper -> cipher crypto: jitterentropy - avoid compiler warnings
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM updates from Russell King: "Bigger items included in this update are: - A series of updates from Arnd for ARM randconfig build failures - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to drivers/irqchip/ - Move ARMs SP804 timer to drivers/clocksource/ - Perf updates from Mark Rutland in preparation to move the ARM perf code into drivers/ so it can be shared with ARM64. - MCPM updates from Nicolas - Add support for taking platform serial number from DT - Re-implement Keystone2 physical address space switch to conform to architecture requirements - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2 changes. - L2C cleanups to avoid unlocking caches if we're prevented by the secure support to unlock. - Avoid cleaning a potentially dirty cache containing stale data on CPU initialisation - Add ARM-only entry point for secondary startup (for machines that can only call into a Thumb kernel in ARM mode). Same thing is also done for the resume entry point. - Provide arch_irqs_disabled via asm-generic - Enlarge ARMv7M vector table - Always use BFD linker for VDSO, as gold doesn't accept some of the options we need. - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all BSYM compiler macros to a "badr" (for branch address). - Shut up compiler warnings provoked by our cmpxchg() implementation. - Ensure bad xchg sizes fail to link" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits) ARM: Fix build if CLKDEV_LOOKUP is not configured ARM: fix new BSYM() usage introduced via for-arm-soc branch ARM: 8383/1: nommu: avoid deprecated source register on mov ARM: 8391/1: l2c: add options to overwrite prefetching behavior ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone ARM: 8384/1: VDSO: force use of BFD linker ARM: 8385/1: VDSO: group link options ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations ARM: remove __bad_xchg definition ARM: 8369/1: ARMv7M: define size of vector table for Vybrid ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion ARM: 8364/1: fix BE32 module loading ARM: 8360/1: add secondary_startup_arm prototype in header file ARM: 8359/1: correct secondary_startup_arm mode ARM: proc-v7: sanitise and document registers around errata ARM: proc-v7: clean up MIDR access ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC defconfig updates from Kevin Hilman: "We keep collecting defconfig updates in a separate branch mostly to encourage people to handle them separately and avoid conflicts between different topics. Most of these are enablement of new SoCs, boards or drivers that have come in, or minor config refreshes due to reorderings in Kconfig files, etc. I.e. mostly minor churn of various kinds" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: multi_v7_defconfig: remove duplicate CONFIG_COMMON_CLK_QCOM=y ARM: multi_v7_defconfig: Enable display on Trats2 board ARM64: add GPIO keys to the defconfig ARM: keystone: defconfig: enable netcp driver by default ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3 ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3 ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig ARM: lpc18xx: remove DEBUG_LL_UART_8250 from defconfig ARM: multi_v7_defconfig: Make media support modular ARM: multi_v7_defconfig: Make sound support modular ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform ARM: exynos_defconfig: savedefconfig ARM: exynos_defconfig: Enable display on Trats2 board ARM: multi_v7_defconfig: Enable OHCI on exynos SoCs ARM: multi_v7_defconfig: Enable TMU for exynos SoCs ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos ARM: multi_v7_defconfig: Enable CPU idle for exynos SoCs ARM: multi_v7_defconfig: Enable Cypress APA I2C Trackpad support ...
-
由 Greg Kroah-Hartman 提交于
The wilc1000 has just too many build warnings to be able to enable it for the 4.2 release. Given that there have not been any patches submitted to properly fix these obvious errors, I'm going to disable it for now. I will enable it back when the build warning fixes are submitted, or, if that never happens, I will remove it from the tree. Cc: Johnny Kim <johnny.kim@atmel.com> Cc: Rachel Kim <rachel.kim@atmel.com> Cc: Dean Lee <dean.lee@atmel.com> Cc: Chris Park <chris.park@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC driver updates from Kevin Hilman: "Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: soc: sunxi: Introduce SoC driver to map SRAMs arm-cci: Add aliases for PMU events arm-cci: Add CCI-500 PMU support arm-cci: Sanitise CCI400 PMU driver specific code arm-cci: Abstract handling for CCI events arm-cci: Abstract out the PMU counter details arm-cci: Cleanup PMU driver code arm-cci: Do not enable CCI-400 PMU by default firmware: qcom: scm: Add HDCP Support ARM: berlin: add an ADC node for the BG2Q ARM: berlin: remove useless chip and system ctrl compatibles clk: berlin: drop direct of_iomap of nodes reg property ARM: berlin: move BG2Q clock node ARM: berlin: move BG2CD clock node ARM: berlin: move BG2 clock node clk: berlin: prepare simple-mfd conversion pinctrl: berlin: drop SoC stub provided regmap ARM: berlin: move pinctrl to simple-mfd nodes pinctrl: berlin: prepare to use regmap provided by syscon reset: berlin: drop arch_initcall initialization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC DT updates from Kevin Hilman: "As usual, quite a few device-tree updates in ARM land. There was one minor churn in DTs due to relicensing under a dual-license, and lots of little additions of new peripherals, features etc, but nothing really exciting to call to your attention. Some higlights, focsuing on support for new SoCs and boards: - AT91: new boards: Overkiz, Acme Systems' Arietta G25 - tegra: HDA support - bcm: new platforms: Buffalo WXR-1900DHP, SmartRG SR400ac, ASUS RT-AC87U - mvebu: new platforms: Compulab CM-A510, Armada 385-based Linksys boards, DLink DNS-327L - OMAP: new platforms: Baltos IR5221, LogicPD Torpedo, Toby-Churchill SL50 - ARM: added support for Juno r1 board - sunxi: A33 SoC support; new boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G - imx: i.MX7D SoC support; new boards: Armadeus Systems APF6, Gateworks GW5510, and aristainetos2 boards - hisilicon: hi6220 SoC support; new boards: 96boards hikey" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (462 commits) ARM: hisi: revert changes from hisi/hip04-dt branch ARM: nomadik: set proper compatible for accelerometer ARM64: juno: add GPIO keys ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes ARM: dts: Introduce STM32F429 MCU ARM: socfpga: dts: enable ethernet for Arria10 devkit ARM: dts: k2l: fix the netcp range size ARM: dts: k2e: fix the netcp range size ARM: dts: k2hk: fix the netcp range size ARM: dts: k2l-evm: Add device bindings for netcp driver ARM: dts: k2e-evm: Add device bindings for netcp driver ARM: dts: k2hk-evm: Add device bindings for netcp driver ARM: BCM5301X: Add DT for Asus RT-AC87U ARM: BCM5301X: add IRQ numbers for PCIe controller ARM: BCM5301X: add NAND flash chip description arm64: dts: Add dts files for Hisilicon Hi6220 SoC clk: hi6220: Document devicetree bindings for hi6220 clock arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC ARM: at91/dt: sama5d4ek: mci0 uses slot 0 ARM: at91/dt: kizbox: fix mismatch LED PWM device ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC cleanups from Kevin Hilman: "A relatively small setup of cleanups this time around, and similar to last time the bulk of it is removal of legacy board support: - OMAP: removal of legacy (non-DT) booting for several platforms - i.MX: remove some legacy board files" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: fix EFM32 build breakage caused by cpu_resume_arm ARM: 8389/1: Add cpu_resume_arm() for firmwares that resume in ARM state ARM: v7 setup function should invalidate L1 cache mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c ARM: OMAP2+: Constify irq_domain_ops ARM: OMAP2+: use symbolic defines for console loglevels instead of numbers ARM: at91: remove useless Makefile.boot ARM: at91: remove at91rm9200_sdramc.h ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h ARM: at91/pm: use the atmel-mc syscon defines pcmcia: at91_cf: Use syscon to configure the MC/smc ARM: at91: declare the at91rm9200 memory controller as a syscon mfd: syscon: Add Atmel MC (Memory Controller) registers definition ARM: at91: drop sam9_smc.c ata: at91: use syscon to configure the smc ARM: ux500: delete static resource defines ARM: ux500: rename ux500_map_io ARM: ux500: look up PRCMU resource from DT ARM: ux500: kill off L2CC static map ...
-
由 Linus Torvalds 提交于
Merge second patchbomb from Andrew Morton: - most of the rest of MM - lots of misc things - procfs updates - printk feature work - updates to get_maintainer, MAINTAINERS, checkpatch - lib/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits) exit,stats: /* obey this comment */ coredump: add __printf attribute to cn_*printf functions coredump: use from_kuid/kgid when formatting corename fs/reiserfs: remove unneeded cast NILFS2: support NFSv2 export fs/befs/btree.c: remove unneeded initializations fs/minix: remove unneeded cast init/do_mounts.c: add create_dev() failure log kasan: remove duplicate definition of the macro KASAN_FREE_PAGE fs/efs: femove unneeded cast checkpatch: emit "NOTE: <types>" message only once after multiple files checkpatch: emit an error when there's a diff in a changelog checkpatch: validate MODULE_LICENSE content checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr() checkpatch: fix processing of MEMSET issues checkpatch: suggest using ether_addr_equal*() checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files checkpatch: remove local from codespell path checkpatch: add --showfile to allow input via pipe to show filenames ...
-
- 26 6月, 2015 20 次提交
-
-
由 Mike Snitzer 提交于
Commit bccab6a0 ("dm cache: switch the "default" cache replacement policy from mq to smq") should've incremented the "default" policy's version number to 1.4.0 rather than reverting to version 1.0.0. Reported-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
This fix enables userspace to detect that the dm-stats changes from the 4.2 merge are in place. Reported-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
This reverts commit 5f1b670d. Justification for revert as reported in this dm-devel post: https://www.redhat.com/archives/dm-devel/2015-June/msg00160.html this change should not be pushed to mainline yet. Firstly, Christoph has a newer version of the patch that fixes silent data corruption problem: https://www.redhat.com/archives/dm-devel/2015-May/msg00229.html And the new version still depends on LLDDs to always complete requests to the end when error happens, while block API doesn't enforce such a requirement. If the assumption is ever broken, the inconsistency between request and bio (e.g. rq->__sector and rq->bio) will cause silent data corruption: https://www.redhat.com/archives/dm-devel/2015-June/msg00022.htmlReported-by: NJunichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
This reverts commit cbc4e3c1. Reported-by: NJunichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull RTC updates from Alexandre Belloni: "Core: - Coding style and whitespace fixes (interface, Makefile and Kconfig) - New rtc_tm_sub() helper - New CONFIG_RTC_SYSTOHC_DEVICE option - Removed rtc_set_mmss() New drivers: - Mediatek MT6397 - Cortina Gemini Drivers: - Year 2106 fixes for isl1208, pcf8563 and sunxi - update author email for at32ap700x and efi - ds1307: alarm fix - efi: use correct EFI 'epoch' - hym8563: make irq optional - imxdi: cleanups and better handling of the security/tamper monitoring - snvs: fix wakealarm - Compilation fixes or warning removal for gemini, mt6397, palmas, pfc8563 - Trivial cleanups for ab8500, ds1216, ds1286, ds1672, ep93xx, hid-sensor-time, max6900, max8998, max77686, max77802, mc13xxx, mv, mxc, s3c, spear, v3020 - Kconfig fixes for stmp3xxx and xgene" * tag 'rtc-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits) rtc: remove useless I2C dependencies rtc: whitespace fixes rtc: Properly sort Makefile MAINTAINERS: Add RTC subsystem repository rtc: pfc8563: fix uninitialized variable warning rtc: ds1307: Enable the mcp794xx alarm after programming time rtc: hym8563: make the irq optional rtc: gemini: fix cocci warnings rtc: mv: correct 24 hour error message rtc: mv: use BIT() rtc: efi: use correct EFI 'epoch' rtc: interface: Remove rtc_set_mmss() sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC rtc: NTP: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization rtc: sunxi: Replace deprecated rtc_tm_to_time() rtc: isl1208: Replace deprecated rtc_tm_to_time() rtc: Introduce rtc_tm_sub() helper function rtc: pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time() rtc: palmas: Initialise bb_charging flag before using it rtc: simplify use of devm_ioremap_resource ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Mediatek I2C, APM X-Gene, Broadcom Settop - major updates to at91, davinci - bugfixes to the mux infrastructure when dealing with the new quirk mechanism - more users for the bus recovery feature - further improvements to the slave framework Plus the usual bunch of smaller driver and core improvements and fixes. There is one patch removing old code from an ARM platform. This has been acked by the sh_mobile maintainer Simon Horman" * 'i2c/for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (48 commits) i2c: busses: i2c-bcm2835: limits cdiv to allowed values i2c: sh_mobile: use proper type for timeout i2c: sh_mobile: use adapter default for timeout i2c: rcar: use proper type for timeout i2c: rcar: use adapter default for timeout i2c: designware: Make sure the device is suspended before disabling runtime PM i2c: tegra: apply size limit quirk i2c: tegra: don't advertise SMBUS_QUICK i2c: octeon: remove unused signal handling i2c: davinci: Optimize SCL generation i2c: mux: pca954x: Use __i2c_transfer because of quirks i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer() i2c: use parent adapter quirks in mux i2c: bcm2835: clear reserved bits in S-Register ARM: shmobile: r8a7740: remove I2C errata handling i2c: sh_mobile: add errata workaround i2c: at91: fix code checker warnings i2c: busses: xgene-slimpro: fix incorrect __init declation for probe i2c: davinci: Avoid sending to own address i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy() ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox updates from Jassi Brar. * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/bcm2835: Fix mailbox full detection. dt: mailbox: Remove 'mbox-names property is discouraged' message from binding mailbox: Add ability for clients to request channels by name mailbox: Enable BCM2835 mailbox support dt/bindings: Add binding for the BCM2835 mailbox driver mailbox: Fix up error handling in mbox_request_channel() mailbox: Make mbox_chan_ops const mailbox: altera: Add dependency on HAS_IOMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac由 Linus Torvalds 提交于
Pull edac updates from Mauro Carvalho Chehab: "Some fixes and additions to the EDAC driver used on modern Intel x86 CPUs. It includes support for Broadwell EP/EX platforms and fixes for motherboards with more than 2 CPU sockets" * tag 'edac/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: support for Broadwell -EP and -EX sb_edac: Fix support for systems with two home agents per socket sb_edac: Fix a typo and a thinko in address handling for Haswell EDAC: Remove arbitrary limit on number of channels
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media updates from Mauro Carvalho Chehab: - Lots of improvements at the DVB API DocBook documentation. Now, the frontend and the network APIs are fully in sync with the Kernel and looks more like the rest of the media documentation; - New frontend driver: cx24120 - New driver for a PCI device: cobalt. This driver is actually not sold in the market, but it is a good example of a multi-HDMI input device; - The dt3155 driver were promoted from staging; - The mantis driver got remote controller support; - New V4L2 driver for ST bdisp SoC chipsets; - Make sparse and smatch happier: several bugs were solved by fixing the issues reported by those static code analyzers. - Lots of new device additions, new features, improvements and cleanups at the existing drivers. * tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (553 commits) [media] lmedm04: fix the range for relative measurements [media] lmedm04: use u32 instead of u64 for relative stats [media] omap3isp: remove unused var [media] saa7134: fix page size on some archs [media] use CONFIG_PM_SLEEP for suspend/resume [media] tuner-i2c: be consistent with I2C declaration [media] si470x: cleanup define namespace [media] bdisp: prevent compiling on random arch [media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers [media] MAINTAINERS: Add entry for the Renesas VSP1 driver [media] videodev2.h: fix copy-and-paste error in V4L2_MAP_XFER_FUNC_DEFAULT [media] Revert "[media] vb2: Push mmap_sem down to memops" [media] mantis: cleanup a warning [media] bdisp-debug: don't try to divide by s64 [media] cx88: don't declare restart_video_queue if not used [media] au0828: move dev->boards atribuition to happen earlier [media] lmedm04: implement dvb v5 statistics [media] bdisp: remove unused var [media] bdisp: remove needless check ts2020: fix compilation on i386 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management updates from Zhang Rui: "Specifics: - enhance Thermal Framework with several new capabilities: * use power estimates * compute weights with relative integers instead of percentages * allow governors to have private data in thermal zones * export thermal zone parameters through sysfs Thanks to the ARM thermal team (Javi, Punit, KP). - introduce a new thermal governor: power allocator. First in kernel closed loop PI(D) controller for thermal control. Thanks to ARM thermal team. - enhance OF thermal to allow thermal zones to have sustainable power HW specification. Thanks to Punit. - introduce thermal driver for Intel Quark SoC x1000platform. Thanks to Ong, Boon Leong. - introduce QPNP PMIC temperature alarm driver. Thanks to Ivan T. I. - introduce thermal driver for Hisilicon hi6220. Thanks to kongxinwei. - enhance Exynos thermal driver to handle Exynos5433 TMU. Thanks to Chanwoo C. - TI thermal driver now has a better implementation for EOCZ bit. From Pavel M. - add id for Skylake processors in int340x processor thermal driver. - a couple of small fixes and cleanups." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) thermal: hisilicon: add new hisilicon thermal sensor driver dt-bindings: Document the hi6220 thermal sensor bindings thermal: of-thermal: add support for reading coefficients property thermal: support slope and offset coefficients thermal: power_allocator: round the division when divvying up power thermal: exynos: Add the support for Exynos5433 TMU thermal: cpu_cooling: Fix power calculation when CPUs are offline thermal: cpu_cooling: Remove cpu_dev update on policy CPU update thermal: export thermal_zone_parameters to sysfs thermal: cpu_cooling: Check memory allocation of power_table ti-soc-thermal: request temperature periodically if hw can't do that itself ti-soc-thermal: implement eocz bit to make driver useful on omap3 cleanup ti-soc-thermal thermal: remove stale THERMAL_POWER_ACTOR select thermal: Default OF created trip points to writable thermal: core: Add Kconfig option to enable writable trips thermal: x86_pkg_temp: drop const for thermal_zone_parameters of: thermal: Introduce sustainable power for a thermal zone thermal: add trace events to the power allocator governor thermal: introduce the Power Allocator governor ...
-
由 Lukas Wunner 提交于
On the MacBook Pro, power of the gpu is cut by a gmux chip. Sometimes the gpu gets stuck in powersaving mode and refuses to wake up ("Refused to change power state, currently in D3"). Inserting a delay between setting the gpu to D3hot and cutting the power seems to help (most of the time). This issue and its (partial) remediation by the patch was observed with an Nvidia GT650M (NVE7 / GK107). Signed-off-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound updates from Takashi Iwai: "It was a busy development cycle at this time, as you can see a wide range of changes in diffstat. There are no big changes but many refactoring and improvements. Here we go some highlights: ALSA core: - Procfs codes were cleaned up to use seq_file - Procfs can be opt out via Kconfig (only for EXPERT) - Two types of jack API were unified finally; now both kctl and input jack devs are handled via a single function call. HD-audio: - Continued code restructuring for the future ASoC driver; now HDA controller driver is split to a core helper module. - Preliminary codes for Skylake audio support in HDA core. - Proper i915 gfx power well management for SKL & co - Enabled runtime PM as default for Intel HDMI/DP codecs - Newer Tegra chip supports - More quirks for Dell headsets, Alienware (with CA0132), etc. - A couple of DRM ELD helper API functions ASoC: - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring - Big refactoring, cleanup and enhancement for the Wolfson ADSP driver - Cleanup series for TI TAS2552 and R-CAR drivers - Fixes and improvements on RT56xx codecs - Support for TI TAS571x power amplifiers - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs - Support for x86 systems with RT5650 and Qualcomm Storm - Support for Mediatek AFE (Audio Front End) unit - Other various small fixes to ASoC codec drivers Firewire: - Enhanced to allow non-blocking streams to use timestamp synchronization - Improve support for DM1500 and BeBoBv3 Misc: - Cleanup of old pci API functions over all PCI sound drivers - Fix long-standing regression of the old powermac i2c setup" * tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits) ALSA: pcm: Fix pcm_class sysfs output ALSA: hda-beep: Update authors dead email address ASoC: wm_adsp: Move DSP Rate controls into the codec ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case ALSA: hda: provide default bus io ops extended hdac ALSA: hda: add hda link cleanup routine ALSA: hda: add hdac_ext stream creation and cleanup routines ASoC: rsrc-card: remove unused ret ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core ASoC: mediatek: Add machine driver for rt5650 rt5676 codec ASoC: mediatek: Add machine driver for MAX98090 codec ASoC: mediatek: Add AFE platform driver ASoC: rsnd: remove io from rsnd_mod ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working() ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx() ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr() ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
Pull DMI updates from Jean Delvare: "The most important change is the new sysfs interface to the DMI table, which will let user-space tools (such as dmidecode) access the table without relying on /dev/mem" * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: struct dmi_header should be packed firmware: dmi_scan: Coding style cleanups Documentation: ABI: sysfs-firmware-dmi: add -entries suffix to file name firmware: dmi_scan: add SBMIOS entry and DMI tables firmware: dmi_scan: Trim DMI table length before exporting it firmware: dmi_scan: Rename dmi_table to dmi_decode_table firmware: dmi: List my quilt tree firmware: dmi_scan: Only honor end-of-table for 64-bit tables
-
由 Rik van Riel 提交于
There is a helpful comment in do_exit() that states we sync the mm's RSS info before statistics gathering. The function that does the statistics gathering is called right above that comment. Change the code to obey the comment. Signed-off-by: NRik van Riel <riel@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Iooss 提交于
This allows detecting improper format string at build time, like: fs/coredump.c:225:5: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'int' [-Wformat=] err = cn_printf(cn, "%ld", cprm->siginfo->si_signo); ^ As si_signo is always an int, the format should be %d here. Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Iooss 提交于
When adding __printf attribute to cn_printf, gcc reports some issues: fs/coredump.c:213:5: warning: format '%d' expects argument of type 'int', but argument 3 has type 'kuid_t' [-Wformat=] err = cn_printf(cn, "%d", cred->uid); ^ fs/coredump.c:217:5: warning: format '%d' expects argument of type 'int', but argument 3 has type 'kgid_t' [-Wformat=] err = cn_printf(cn, "%d", cred->gid); ^ These warnings come from the fact that the value of uid/gid needs to be extracted from the kuid_t/kgid_t structure before being used as an integer. More precisely, cred->uid and cred->gid need to be converted to either user-namespace uid/gid or to init_user_ns uid/gid. Use init_user_ns in order not to break existing ABI, and document this in Documentation/sysctl/kernel.txt. While at it, format uid and gid values with %u instead of %d because uid_t/__kernel_uid32_t and gid_t/__kernel_gid32_t are unsigned int. Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Firo Yang 提交于
kmem_cache_alloc() returns void*. Signed-off-by: NFiro Yang <firogm@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
The "fh_len" passed to ->fh_to_* is not guaranteed to be that same as that returned by encode_fh - it may be larger. With NFSv2, the filehandle is fixed length, so it may appear longer than expected and be zero-padded. So we must test that fh_len is at least some value, not exactly equal to it. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
bh, od_sup and this_node are unconditionally initialized in befs_bt_read_super() and befs_btree_find() Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Firo Yang 提交于
kmem_cache_alloc() returns void*. Signed-off-by: NFiro Yang <firogm@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-