- 03 5月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
We need to work on cleaning up the relationship between kobjects, ksets and ktypes. The removal of 'struct subsystem' is the first step of this, especially as it is not really needed at all. Thanks to Kay for fixing the bugs in this patch. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 4月, 2007 1 次提交
-
-
由 Timo Savola 提交于
If rootmode isn't valid, we hit the BUG() in fuse_init_inode. Now EINVAL is returned. Signed-off-by: NTimo Savola <tsavola@movial.fi> Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Josef 'Jeff' Sipek 提交于
This patch is inspired by Arjan's "Patch series to mark struct file_operations and struct inode_operations const". Compile tested with gcc & sparse. Signed-off-by: NJosef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2007 1 次提交
-
-
由 Andrew Morton 提交于
Convert all calls to invalidate_inode_pages() into open-coded calls to invalidate_mapping_pages(). Leave the invalidate_inode_pages() wrapper in place for now, marked as deprecated. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 12月, 2006 6 次提交
-
-
由 Miklos Szeredi 提交于
Randy Dunlap wote: > Should FUSE depend on BLOCK? Without that and with BLOCK=n, I get: > > inode.c:(.text+0x3acc5): undefined reference to `sb_set_blocksize' > inode.c:(.text+0x3a393): undefined reference to `get_sb_bdev' > fs/built-in.o:(.data+0xd718): undefined reference to `kill_block_super Most fuse filesystems work fine without block device support, so I think a better solution is to disable the 'fuseblk' filesystem type if BLOCK=n. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add a DESTROY operation for block device based filesystems. With the help of this operation, such a filesystem can flush dirty data to the device synchronously before the umount returns. This is needed in situations where the filesystem is assumed to be clean immediately after unmount (e.g. ejecting removable media). Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add 'blksize' option for block device based filesystems. During initialization this is used to set the block size on the device and the super block. The default block size is 512bytes. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
I never intended this, but people started using fuse to implement block device based "real" filesystems (ntfs-3g, zfs). The following four patches add better support for these kinds of filesystems. Unlike "normal" fuse filesystems, using this feature should require superuser privileges (enforced by the fusermount utility). Thanks to Szabolcs Szakacsits for the input and testing. This patch adds a 'fuseblk' filesystem type, which is only different from the 'fuse' filesystem type in how the 'dev_name' mount argument is interpreted. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 10月, 2006 4 次提交
-
-
由 Miklos Szeredi 提交于
Fuse considered it an error (EIO) if lookup returned a directory inode, to which a dentry already refered. This is because directory aliases are not allowed. But in a network filesystem this could happen legitimately, if a directory is moved on a remote client. This patch attempts to relax the restriction by trying to first evict the offending alias from the cache. If this fails, it still returns an error (EBUSY). A rarer situation is if an mkdir races with an indenpendent lookup, which finds the newly created directory already moved. In this situation the mkdir should return success, but that would be incorrect, since the dentry cannot be instantiated, so return EBUSY. Previously checking for a directory alias and instantiation of the dentry weren't done atomically in lookup/mkdir, hence two such calls racing with each other could create aliased directories. To prevent this introduce a new per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations with a directory inode. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Fix a spurious BUG in an unlikely race, where at least three parallel lookups return the same inode, but with different file type. This has not yet been observed in real life. Allowing unlimited retries could delay fuse_iget() indefinitely, but this is really for the broken userspace filesystem to worry about. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
An inode could be returned by independent parallel lookups, in this case an update of the lookup counter could be lost resulting in a memory leak in userspace. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Fuse didn't always call i_size_write() with i_mutex held which caused rare hangs on SMP/32bit. This bug has been present since fuse-2.2, well before being merged into mainline. The simplest solution is to protect i_size_write() with the per-connection spinlock. Using i_mutex for this purpose would require some restructuring of the code and I'm not even sure it's always safe to acquire i_mutex in all places i_size needs to be set. Since most of vmtruncate is already duplicated for other reasons, duplicate the remaining part as well, making all i_size_write() calls internal to fuse. Using i_size_write() was unnecessary in fuse_init_inode(), since this function is only called on a newly created locked inode. Reported by a few people over the years, but special thanks to Dana Henriksen who was persistent enough in helping me debug it. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 9月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
Some filesystems may want to report different values depending on the path within the filesystem, i.e. one mount is actually several filesystems. This can be the case for a network filesystem exported by an unprivileged server (e.g. sshfs). This is now possible, thanks to David Howells "VFS: Permit filesystem to perform statfs with a known root dentry" patch. This change is backward compatible, so no need to change interface version. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 9月, 2006 1 次提交
-
-
由 Theodore Ts'o 提交于
This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 8月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
It is entirely possible (though rare) that jiffies half-wraps around, while a dentry/inode remains in the cache. This could mean that the dentry/inode is not invalidated for another half wraparound-time. To get around this problem, use 64-bit jiffies. The only problem with this is that dentry->d_time is 32 bits on 32-bit archs. So use d_fsdata as the high 32 bits. This is an ugly hack, but far simpler, than having to allocate private data just for this purpose. Since 64-bit jiffies can be assumed never to wrap around, simple comparison can be used, and a zero time value can represent "invalid". Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2006 5 次提交
-
-
由 Miklos Szeredi 提交于
VFS uses current->files pointer as lock owner ID, and it wouldn't be prudent to expose this value to userspace. So scramble it with XTEA using a per connection random key, known only to the kernel. Only one direction needs to be implemented, since the ID is never sent in the reverse direction. The XTEA algorithm is implemented inline since it's simple enough to do so, and this adds less complexity than if the crypto API were used. Thanks to Jesper Juhl for the idea. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add synchronous request interruption. This is needed for file locking operations which have to be interruptible. However filesystem may implement interruptibility of other operations (e.g. like NFS 'intr' mount option). Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
This patch adds POSIX file locking support to the fuse interface. This implementation doesn't keep any locking state in kernel. Unlocking on close() is handled by the FLUSH message, which now contains the lock owner id. Mandatory locking is not supported. The filesystem may enfoce mandatory locking in userspace if needed. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add a control filesystem to fuse, replacing the attributes currently exported through sysfs. An empty directory '/sys/fs/fuse/connections' is still created in sysfs, and mounting the control filesystem here provides backward compatibility. Advantages of the control filesystem over the previous solution: - allows the object directory and the attributes to be owned by the filesystem owner, hence letting unpriviled users abort the filesystem connection - does not suffer from module unload race [akpm@osdl.org: fix this fs for recent dhowells depredations] [akpm@osdl.org: fix 64-bit printk warnings] Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Don't put requests into the background when a fatal interrupt occurs while the request is in userspace. This removes a major wart from the implementation. Backgrounding of requests was introduced to allow breaking of deadlocks. However now the same can be achieved by aborting the filesystem through the 'abort' sysfs attribute. This is a change in the interface, but should not cause problems, since these kinds of deadlocks never happen during normal operation. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2006 2 次提交
-
-
由 David Howells 提交于
Give the statfs superblock operation a dentry pointer rather than a superblock pointer. This complements the get_sb() patch. That reduced the significance of sb->s_root, allowing NFS to place a fake root there. However, NFS does require a dentry to use as a target for the statfs operation. This permits the root in the vfsmount to be used instead. linux/mount.h has been added where necessary to make allyesconfig build successfully. Interest has also been expressed for use with the FUSE and XFS filesystems. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 6月, 2006 1 次提交
-
-
由 Trond Myklebust 提交于
Allow filesystems to decide to perform pre-umount processing whether or not MNT_FORCE is set. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 4月, 2006 2 次提交
-
-
由 Miklos Szeredi 提交于
BKL does not protect against races if the task may sleep between checking and setting a value. So move checking of file->private_data near to setting it in fuse_fill_super(). Found by Al Viro. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
由 Miklos Szeredi 提交于
This reverts 73ce8355 commit. It was wrong, because it didn't take into account the requirement, that iput() for background requests must be performed synchronously with ->put_super(), otherwise active inodes may remain after unmount. The right solution is to keep the sbput_sem and perform iput() within the locked region, but move fput() outside sbput_sem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
- 12 4月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
A deadlock was possible, when the last reference to the superblock was held due to a background request containing a file reference. Releasing the file would release the vfsmount which in turn would release the superblock. Since sbput_sem is held during the fput() and fuse_put_super() tries to acquire this same semaphore, a deadlock results. The chosen soltuion is to get rid of sbput_sem, and instead use the spinlock to ensure the referenced inodes/file are released only once. Since the actual release may sleep, defer these outside the locked region, but using local variables instead of the structure members. This is a much more rubust solution. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
- 11 4月, 2006 5 次提交
-
-
由 Miklos Szeredi 提交于
The previous patch removed limiting the number of outstanding requests. This patch adds a much simpler limiting, that is also compatible with file locking operations. A task may have at most one synchronous request allocated. So these requests need not be otherwise limited. However the number of background requests (release, forget, asynchronous reads, interrupted requests) can grow indefinitely. This can be used by a malicous user to cause FUSE to allocate arbitrary amounts of unswappable kernel memory, denying service. For this reason add a limit for the number of background requests, and block allocations of new requests until the number goes bellow the limit. Also use this mechanism to block all requests until the INIT reply is received. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
FUSE allocated most requests from a fixed size pool filled at mount time. However in some cases (release/forget) non-pool requests were used. File locking operations aren't well served by the request pool, since they may block indefinetly thus exhausting the pool. This patch removes the request pool and always allocates requests on demand. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Remove the global spinlock in favor of a per-mount one. This patch is basically find & replace. The difficult part has already been done by the previous patch. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
This is in preparation for removing the global spinlock in favor of a per-mount one. The only critical part is the interaction between fuse_dev_release() and fuse_fill_super(): fuse_dev_release() must see the assignment to file->private_data, otherwise it will leak the reference to fuse_conn. This is ensured by the fput() operation, which will synchronize the assignment with other CPU's that may do a final fput() soon after this. Also redundant locking is removed from fuse_fill_super(), where exclusion is already ensured by the BKL held for this function by the VFS. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This adds asynchronous notification to FUSE - a FUSE server can request O_ASYNC on a /dev/fuse file descriptor and receive SIGIO when there is input available. One subtlety - fuse_dev_fasync, which is called when O_ASYNC is requested, does no locking, unlink the other methods. I think it's unnecessary, as the fuse_conn.fasync list is manipulated only by fasync_helper and kill_fasync, which provide their own locking. It would also be wrong to use the fuse_lock, as it's a spin lock and fasync_helper can sleep. My one concern with this is the fuse_conn going away underneath fuse_dev_fasync - sys_fcntl takes a reference on the file struct, so this seems not to be a problem. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 2月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
While asynchronous reads mean a performance improvement in most cases, if the filesystem assumed that reads are synchronous, then async reads may degrade performance (filesystem may receive reads out of order, which can confuse it's own readahead logic). With sshfs a 1.5 to 4 times slowdown can be measured. There's also a need for userspace filesystems to know whether asynchronous reads are supported by the kernel or not. To achive these, negotiate in the INIT request whether async reads will be used and the maximum readahead value. Update interface version to 7.6 If userspace uses a version earlier than 7.6, then disable async reads, and set maximum readahead value to the maximum read size, as done in previous versions. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 1月, 2006 6 次提交
-
-
由 Miklos Szeredi 提交于
Fix race in setting bitfields of fuse_conn. Spotted by Andrew Morton. The two fields ->connected and ->mounted were always changed with the fuse_lock held. But other bitfields in the same structure were changed without the lock. In theory this could lead to losing the assignment of even the ones under lock. The chosen solution is to change these two fields to be a full unsigned type. The other bitfields aren't "important" enough to warrant the extra complexity of full locking or changing them to bitops. For all bitfields document why they are safe wrt. concurrent assignments. Also make the initialization of the 'num_waiting' atomic counter explicit. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Now the INIT requests can be completely handled in inode.c and the fuse_send_init() function need not be global any more. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add ability to abort a filesystem connection. With the introduction of asynchronous reads, the ability to interrupt any request is not enough to dissolve deadlocks, since now waiting for the request completion (page unlocked) is independent of the actual request, so in a deadlock all threads will be uninterruptible. The solution is to make it possible to abort all requests, even those currently undergoing I/O to/from userspace. The natural interface for this is 'mount -f mountpoint', but that only works as long as the filesystem is attached. So also add an 'abort' attribute to the sysfs view of the connection. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
This patch adds the 'waiting' attribute which indicates how many filesystem requests are currently waiting to be completed. A non-zero value without any filesystem activity indicates a hung or deadlocked filesystem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Kobjectify fuse_conn, and make it visible under /sys/fs/fuse/connections. Lacking any natural naming, connections are numbered. This patch doesn't add any attributes, just the infrastructure. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
The ->connected flag for a fuse_conn object previously only indicated whether the device file for this connection is currently open or not. Change it's meaning so that it indicates whether the connection is active or not: now either umount or device release will clear the flag. The separate ->mounted flag is still needed for handling background requests. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-