- 06 7月, 2005 40 次提交
-
-
由 Eugene Surovegin 提交于
Add explicit disabling of 440GP IRQ compatibility mode when configuring 440GX interrupt controller. This helps when board firmware for some reason uses this compatibility mode and leaves it enabled. It breaks 440GX interrupt code because it assumes native 440GX IRQ mode. People seems to be continuously bitten by this. Signed-off-by: NEugene Surovegin <ebs@ebshome.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
As part of my timeofday rework, I've been looking at the NTP code and I noticed that the PPC architecture is apparently misusing the NTP's time_offset (it is a terrible name!) value as some form of timezone offset. This could cause problems when time_offset changed by the NTP code. This patch changes the PPC code so it uses a more clear local variable: timezone_offset. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Acked-by: NTom Rini <trini@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrei Konovalov 提交于
This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: NGennadiy Kurtsman <gkurtsman@ru.mvista.com> Signed-off-by: NAndrei Konovalov <akonovalov@ru.mvista.com> Acked-by: NTom Rini <trini@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Robert Olsson 提交于
Signed-off-by: NRobert Olsson <Robert.Olsson@data.slu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Congestion window recover after loss depends upon the fact that if we have a full MSS sized frame at the head of the send queue, we will send it. TSO deferral can defeat the ACK clocking necessary to exit cleanly from recovery. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Useful in combination with classful qdiscs to drop or temporary disable certain flows, e.g. one could block specific ds flows with dsmark. Unlike the noop qdisc it can be controlled by the user and statistic accounting is done. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Make TSO segment transmit size decisions at send time not earlier. The basic scheme is that we try to build as large a TSO frame as possible when pulling in the user data, but the size of the TSO frame output to the card is determined at transmit time. This is guided by tp->xmit_size_goal. It is always set to a multiple of MSS and tells sendmsg/sendpage how large an SKB to try and build. Later, tcp_write_xmit() and tcp_push_one() chop up the packet if necessary and conditions warrant. These routines can also decide to "defer" in order to wait for more ACKs to arrive and thus allow larger TSO frames to be emitted. A general observation is that TSO elongates the pipe, thus requiring a larger congestion window and larger buffering especially at the sender side. Therefore, it is important that applications 1) get a large enough socket send buffer (this is accomplished by our dynamic send buffer expansion code) 2) do large enough writes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This makes it easier to understand, and allows easier tweaking of the heuristic later on. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
In tcp_clean_rtx_queue(), if the TSO packet is not even partially acked, do not waste time calling tcp_tso_acked(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Everything stated there is out of data. tcp_trim_skb() does adjust the available socket send buffer space and skb->truesize now. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Only put user data purely to pages when doing TSO. The extra page allocations cause two problems: 1) Add the overhead of the page allocations themselves. 2) Make us do small user copies when we get to the end of the TCP socket cache page. It is still beneficial to purely use pages for TSO, so we will do it for that case. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
tcp_snd_test() is run for every packet output by a single call to tcp_write_xmit(), but this is not necessary. For one, the congestion window space needs to only be calculated one time, then used throughout the duration of the loop. This cleanup also makes experimenting with different TSO packetization schemes much easier. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
tcp_snd_test() does several different things, use inline functions to express this more clearly. 1) It initializes the TSO count of SKB, if necessary. 2) It performs the Nagle test. 3) It makes sure the congestion window is adhered to. 4) It makes sure SKB fits into the send window. This cleanup also sets things up so that things like the available packets in the congestion window does not need to be calculated multiple times by packet sending loops such as tcp_write_xmit(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
'nonagle' should be passed to the tcp_snd_test() function as 'TCP_NAGLE_PUSH' if we are checking an SKB not at the tail of the write_queue. This is because Nagle does not apply to such frames since we cannot possibly tack more data onto them. However, while doing this __tcp_push_pending_frames() makes all of the packets in the write_queue use this modified 'nonagle' value. Fix the bug and simplify this function by just calling tcp_write_xmit() directly if sk_send_head is non-NULL. As a result, we can now make tcp_data_snd_check() just call tcp_push_pending_frames() instead of the specialized __tcp_data_snd_check(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
tcp_write_xmit() uses tcp_current_mss(), but some of it's callers, namely __tcp_push_pending_frames(), already has this value available already. While we're here, fix the "cur_mss" argument to be "unsigned int" instead of plain "unsigned". Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Put the main basic block of work at the top-level of tabbing, and mark the TCP_CLOSE test with unlikely(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The tcp_cwnd_validate() function should only be invoked if we actually send some frames, yet __tcp_push_pending_frames() will always invoke it. tcp_write_xmit() does the call for us, so the call here can simply be removed. Also, tcp_write_xmit() can be marked static. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
When we add any new packet to the TCP socket write queue, we must call skb_header_release() on it in order for the TSO sharing checks in the drivers to work. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It reimplements portions of tcp_snd_check(), so it we move it to tcp_output.c we can consolidate it's logic much easier in a later change. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This just moves the code into tcp_output.c, no code logic changes are made by this patch. Using this as a baseline, we can begin to untangle the mess of comparisons for the Nagle test et al. We will also be able to reduce all of the redundant computation that occurs when outputting data packets. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
On each packet output, we call tcp_dec_quickack_mode() if the ACK flag is set. It drops tp->ack.quick until it hits zero, at which time we deflate the ATO value. When doing TSO, we are emitting multiple packets with ACK set, so we should decrement tp->ack.quick that many segments. Note that, unlike this case, tcp_enter_cwr() should not take the tcp_skb_pcount(skb) into consideration. That function, one time, readjusts tp->snd_cwnd and moves into TCP_CA_CWR state. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The ideal and most optimal layout for an SKB when doing scatter-gather is to put all the headers at skb->data, and all the user data in the page array. This makes SKB splitting and combining extremely simple, especially before a packet goes onto the wire the first time. So, when sk_stream_alloc_pskb() is given a zero size, make sure there is no skb_tailroom(). This is achieved by applying SKB_DATA_ALIGN() to the header length used here. Next, make select_size() in TCP output segmentation use a length of zero when NETIF_F_SG is true on the outgoing interface. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
I suspect "#define __ARGS(x) ()" was deprecated before I was born. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Chau 提交于
A trivial patch to improve the readability of dev_set_promiscuity() in net/core/dev.c. New code does exactly the same thing as original code. Signed-off-by: NDavid Chau <ddcc@mit.edu> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
Dave, you were right and the sleeping locks in shaper were broken. Markus Kanet noticed this and also tested the patch below that switches locking to spinlocks. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Olsson 提交于
Below a patch to preallocate memory when doing resize of trie (inflate halve) If preallocations fails it just skips the resize of this tnode for this time. The oops we got when killing bgpd (with full routing) is now gone. Patrick memory patch is also used. Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- rt_check_expire() fixes (an overflow occured if size of the hash was >= 65536) reminder of the bugfix: The rt_check_expire() has a serious problem on machines with large route caches, and a standard HZ value of 1000. With default values, ie ip_rt_gc_interval = 60*HZ = 60000 ; the loop count : for (t = ip_rt_gc_interval << rt_hash_log; t >= 0; overflows (t is a 31 bit value) as soon rt_hash_log is >= 16 (65536 slots in route cache hash table). In this case, rt_check_expire() does nothing at all Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- rt hash table allocated using alloc_large_system_hash() function. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- Locking abstraction - Spinlocks moved out of rt hash table : Less memory (50%) used by rt hash table. it's a win even on UP. - Sizing of spinlocks table depends on NR_CPUS Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Inflating a node a couple of times makes it exceed the 128k kmalloc limit. Use __get_free_pages for allocations > PAGE_SIZE, as in fib_hash. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NRobert Olsson <Robert.Olsson@data.slu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add support for ethtool -C with verification of user parameters. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Makes IPv4 ip_rcv registration happen last in af_inet. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Missing PCI_REV_DESC define. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Current behaviour is to not report an error if a rate estimator is created together with a qdisc and the configuration of the rate estimator is bogus. This leads to unexpected behaviour because the user is not notified. New behaviour is to report the error and let the whole qdisc creation operation fail so the user is able to fix his mistake. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds qdisc_alloc() to share code between qdisc_create() and qdisc_create_dflt(). Hides the qdisc alignment behind macros and makes use of them. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-