- 28 4月, 2014 11 次提交
-
-
由 Wei Yang 提交于
On PowerNV platform, we are holding an unnecessary refcount on a pci_dev, which leads to the pci_dev is not destroyed when hotplugging a pci device. This patch release the unnecessary refcount. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Wei Yang 提交于
During the EEH hotplug event, iommu_add_device() will be invoked three times and two of them will trigger warning or error. The three times to invoke the iommu_add_device() are: pci_device_add ... set_iommu_table_base_and_group <- 1st time, fail device_add ... tce_iommu_bus_notifier <- 2nd time, succees pcibios_add_pci_devices ... pcibios_setup_bus_devices <- 3rd time, re-attach The first time fails, since the dev->kobj->sd is not initialized. The dev->kobj->sd is initialized in device_add(). The third time's warning is triggered by the re-attach of the iommu_group. After applying this patch, the error iommu_tce: 0003:05:00.0 has not been added, ret=-14 and the warning [ 204.123609] ------------[ cut here ]------------ [ 204.123645] WARNING: at arch/powerpc/kernel/iommu.c:1125 [ 204.123680] Modules linked in: xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT bnep bluetooth 6lowpan_iphc rfkill xt_conntrack ebtable_nat ebtable_broute bridge stp llc mlx4_ib ib_sa ib_mad ib_core ib_addr ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw bnx2x tg3 mlx4_core nfsd ptp mdio ses libcrc32c nfs_acl enclosure be2net pps_core shpchp lockd kvm uinput sunrpc binfmt_misc lpfc scsi_transport_fc ipr scsi_tgt [ 204.124356] CPU: 18 PID: 650 Comm: eehd Not tainted 3.14.0-rc5yw+ #102 [ 204.124400] task: c0000027ed485670 ti: c0000027ed50c000 task.ti: c0000027ed50c000 [ 204.124453] NIP: c00000000003cf80 LR: c00000000006c648 CTR: c00000000006c5c0 [ 204.124506] REGS: c0000027ed50f440 TRAP: 0700 Not tainted (3.14.0-rc5yw+) [ 204.124558] MSR: 9000000000029032 <SF,HV,EE,ME,IR,DR,RI> CR: 88008084 XER: 20000000 [ 204.124682] CFAR: c00000000006c644 SOFTE: 1 GPR00: c00000000006c648 c0000027ed50f6c0 c000000001398380 c0000027ec260300 GPR04: c0000027ea92c000 c00000000006ad00 c0000000016e41b0 0000000000000110 GPR08: c0000000012cd4c0 0000000000000001 c0000027ec2602ff 0000000000000062 GPR12: 0000000028008084 c00000000fdca200 c0000000000d1d90 c0000027ec281a80 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 GPR24: 000000005342697b 0000000000002906 c000001fe6ac9800 c000001fe6ac9800 GPR28: 0000000000000000 c0000000016e3a80 c0000027ea92c090 c0000027ea92c000 [ 204.125353] NIP [c00000000003cf80] .iommu_add_device+0x30/0x1f0 [ 204.125399] LR [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0 [ 204.125443] Call Trace: [ 204.125464] [c0000027ed50f6c0] [c0000027ed50f750] 0xc0000027ed50f750 (unreliable) [ 204.125526] [c0000027ed50f750] [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0 [ 204.125588] [c0000027ed50f7d0] [c000000000069cc8] .pnv_pci_dma_dev_setup+0x78/0x340 [ 204.125650] [c0000027ed50f870] [c000000000044408] .pcibios_setup_device+0x88/0x2f0 [ 204.125712] [c0000027ed50f940] [c000000000046040] .pcibios_setup_bus_devices+0x60/0xd0 [ 204.125774] [c0000027ed50f9c0] [c000000000043acc] .pcibios_add_pci_devices+0xdc/0x1c0 [ 204.125837] [c0000027ed50fa50] [c00000000086f970] .eeh_reset_device+0x36c/0x4f0 [ 204.125939] [c0000027ed50fb20] [c00000000003a2d8] .eeh_handle_normal_event+0x448/0x480 [ 204.126068] [c0000027ed50fbc0] [c00000000003a35c] .eeh_handle_event+0x4c/0x340 [ 204.126192] [c0000027ed50fc80] [c00000000003a74c] .eeh_event_handler+0xfc/0x1b0 [ 204.126319] [c0000027ed50fd30] [c0000000000d1ea0] .kthread+0x110/0x130 [ 204.126430] [c0000027ed50fe30] [c00000000000a460] .ret_from_kernel_thread+0x5c/0x7c [ 204.126556] Instruction dump: [ 204.126610] 7c0802a6 fba1ffe8 fbc1fff0 fbe1fff8 f8010010 f821ff71 7c7e1b78 60000000 [ 204.126787] 60000000 e87e0298 3143ffff 7d2a1910 <0b090000> 2fa90000 40de00c8 ebfe0218 [ 204.126966] ---[ end trace 6e7aefd80add2973 ]--- are cleared. This patch removes iommu_add_device() in pnv_pci_ioda_dma_dev_setup(), which revert part of the change in commit d905c5df(PPC: POWERNV: move iommu_add_device earlier). Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
With this patch I was able to update firmware on an LE kernel. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We have a subtle race when sending CPUs back to OPAL on kexec. We mark them as "in real mode" right before we send them down. Once we've booted the new kernel, it might try to call opal_reinit_cpus() to change endianness, and that requires all CPUs to be spinning inside OPAL. However there is no synchronization here and we've observed cases where the returning CPUs hadn't established their new state inside OPAL before opal_reinit_cpus() is called, causing it to fail. The proper fix is to actually wait for them to go down all the way from the kexec'ing kernel. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joel Stanley 提交于
The size of the sysparam sysfs files is determined from the device tree at boot. However the buffer is hard coded to 64 bytes. If we encounter a parameter that is larger than 64, or miss-parse the device tree, the buffer will overflow when reading or writing to the parameter. Check it at discovery time, and if the parameter is too large, do not create a sysfs entry for it. Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joel Stanley 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joel Stanley 提交于
The sysparam code currently uses the userspace supplied number of bytes when memcpy()ing in to a local 64-byte buffer. Limit the maximum number of bytes by the size of the buffer. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joel Stanley 提交于
The OPAL calls are returning int64_t values, which the sysparam code stores in an int, and the sysfs callback returns ssize_t. Make code a easier to read by consistently using ssize_t. Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joel Stanley 提交于
When a sysparam query in OPAL returned a negative value (error code), sysfs would spew out a decent chunk of memory; almost 64K more than expected. This was traced to a sign/unsigned mix up in the OPAL sysparam sysfs code at sys_param_show. The return value of sys_param_show is a ssize_t, calculated using return ret ? ret : attr->param_size; Alan Modra explains: "attr->param_size" is an unsigned int, "ret" an int, so the overall expression has type unsigned int. Result is that ret is cast to unsigned int before being cast to ssize_t. Instead of using the ternary operator, set ret to the param_size if an error is not detected. The same bug exists in the sysfs write callback; this patch fixes it in the same way. A note on debugging this next time: on my system gcc will warn about this if compiled with -Wsign-compare, which is not enabled by -Wall, only -Wextra. Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Li Zhong 提交于
commit 41dd03a9 may cause Oops in rtas_stop_self(). The reason is that the rtas_args was moved into stack space. For a box with more that 4GB RAM, the stack could easily be outside 32bit range, but RTAS is 32bit. So the patch moves rtas_args away from stack by adding static before it. Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Jeff Mahoney 提交于
Commit aac416fc (lkdtm: flush icache and report actions) calls flush_icache_range from a module. It's exported on most architectures that implement it, but not on powerpc. This patch exports it to fix the module link failure. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 4月, 2014 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Back from long weekend here in India and now the time to send fixes for slave dmaengine. - Dan's fix of sirf xlate code - Jean's fix for timberland - edma fixes by Sekhar for SG handling and Yuan for changing init call" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: fix eDMA driver as a subsys_initcall dmaengine: sirf: off by one in of_dma_sirfsoc_xlate() platform: Fix timberdale dependencies dma: edma: fix incorrect SG list handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull iommu fixes from Joerg Roedel: "Fixes for regressions: - fix wrong IOMMU enumeration causing some SCSI device drivers initialization failures - ARM-SMMU fixes for a panic condition and a wrong return value" * tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte iommu/arm-smmu: Return 0 on unmap failure iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges iommu/vt-d: fix memory leakage caused by commit ea8ea460
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
-
- 20 4月, 2014 9 次提交
-
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: User visible changes: * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev) * Improve error reporting for record session failure (Adrien BAK) * Fix 'Min time' counting in report command (Alexander Yarygin) Signed-off-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Adrien BAK 提交于
In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NAdrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by: NJiri Olsa <jolsa@redhat.com>
-
由 Vladimir Nikulichev 提交于
pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by: NVladimir Nikulichev <nvs@tbricks.com> Tested-by: NNamhyung Kim <namhyung@kernel.org> Reviewed-by: NAdrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvsSigned-off-by: NJiri Olsa <jolsa@redhat.com>
-
由 Alexander Yarygin 提交于
Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by: NJiri Olsa <jolsa@redhat.com>
-
由 Eric Dumazet 提交于
A va_list needs to be copied in case it needs to be used twice. Thanks to Hugh for debugging this issue, leading to various panics. Tested: lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern 'produce_core' is simply : main() { *(int *)0 = 1;} lpq84:~# ./produce_core Segmentation fault (core dumped) lpq84:~# dmesg | tail -1 [ 614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed Notice the last argument was replaced by a NULL (we were lucky enough to not crash, but do not try this on your production machine !) After fix : lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern lpq83:~# ./produce_core Segmentation fault lpq83:~# dmesg | tail -1 [ 740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed Fixes: 5fe9d8ca ("coredump: cn_vprintf() has no reason to call vsnprintf() twice") Signed-off-by: NEric Dumazet <edumazet@google.com> Diagnosed-by: NHugh Dickins <hughd@google.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Two fixes: - a SCHED_DEADLINE task selection fix - a sched/numa related lockdep splat fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Check for stop task appearance when balancing happens sched/numa: Fix task_numa_free() lockdep splat
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Two kernel side fixes: - an Intel uncore PMU driver potential crash fix - a kprobes/perf-call-graph interaction fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU kprobes/x86: Fix page-fault handling logic
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Unfortunately this contains no easter eggs, its a bit larger than I'd like, but I included a patch that just moves code from one file to another and I'd like to avoid merge conflicts with that later, so it makes it seem worse than it is, Otherwise: - radeon: fixes to use new microcode to stabilise some cards, use some common displayport code, some runtime pm fixes, pll regression fixes - i915: fix for some context oopses, a warn in a used path, backlight fixes - nouveau: regression fix - omap: a bunch of fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (51 commits) drm: bochs: drop unused struct fields drm: bochs: add power management support drm: cirrus: add power management support drm: Split out drm_probe_helper.c from drm_crtc_helper.c drm/plane-helper: Don't fake-implement primary plane disabling drm/ast: fix value check in cbr_scan2 drm/nouveau/bios: fix a bit shift error introduced by 457e77b2 drm/radeon/ci: make sure mc ucode is loaded before checking the size drm/radeon/si: make sure mc ucode is loaded before checking the size drm/radeon: improve PLL params if we don't match exactly v2 drm/radeon: memory leak on bo reservation failure. v2 drm/radeon: fix VCE fence command drm/radeon: re-enable mclk dpm on R7 260X asics drm/radeon: add support for newer mc ucode on CI (v2) drm/radeon: add support for newer mc ucode on SI (v2) drm/radeon: apply more strict limits for PLL params v2 drm/radeon: update CI DPM powertune settings drm/radeon: fix runpm handling on APUs (v4) drm/radeon: disable mclk dpm on R7 260X drm/tegra: Remove gratuitous pad field ...
-
- 19 4月, 2014 16 次提交
-
-
git://people.freedesktop.org/~deathsimple/linux由 Dave Airlie 提交于
Some i2c fixes over DisplayPort. * 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: Improve vramlimit module param documentation drm/radeon: fix audio pin counts for DCE6+ (v2) drm/radeon/dp: switch to the common i2c over aux code drm/dp/i2c: Update comments about common i2c over dp assumptions (v3) drm/dp/i2c: send bare addresses to properly reset i2c connections (v4) drm/radeon/dp: handle zero sized i2c over aux transactions (v2) drm/i915: support address only i2c-over-aux transactions drm/tegra: dp: Support address-only I2C-over-AUX transactions
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull more networking fixes from David Miller: 1) Fix mlx4_en_netpoll implementation, it needs to schedule a NAPI context, not synchronize it. From Chris Mason. 2) Ipv4 flow input interface should never be zero, it should be LOOPBACK_IFINDEX instead. From Cong Wang and Julian Anastasov. 3) Properly configure MAC to PHY connection in mvneta devices, from Thomas Petazzoni. 4) sys_recv should use SYSCALL_DEFINE. From Jan Glauber. 5) Tunnel driver ioctls do not use the correct namespace, fix from Nicolas Dichtel. 6) Fix memory leak on seccomp filter attach, from Kees Cook. 7) Fix lockdep warning for nested vlans, from Ding Tianhong. 8) Crashes can happen in SCTP due to how the auth_enable value is managed, fix from Vlad Yasevich. 9) Wireless fixes from John W Linville and co. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) net: sctp: cache auth_enable per endpoint tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled vlan: Fix lockdep warning when vlan dev handle notification seccomp: fix memory leak on filter attach isdn: icn: buffer overflow in icn_command() ip6_tunnel: use the right netns in ioctl handler sit: use the right netns in ioctl handler ip_tunnel: use the right netns in ioctl handler net: use SYSCALL_DEFINEx for sys_recv net: mdio-gpio: Add support for separate MDI and MDO gpio pins net: mdio-gpio: Add support for active low gpio pins net: mdio-gpio: Use devm_ functions where possible ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source() ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll net: mvneta: properly configure the MAC <-> PHY connection in all situations net: phy: add minimal support for QSGMII PHY sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast) mwifiex: fix hung task on command timeout mwifiex: process event before command response ...
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "A set of 5 small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cif: fix dead code cifs: fix error handling cifs_user_readv fs: cifs: remove unused variable. Return correct error on query of xattr on file with empty xattrs cifs: Wait for writebacks to complete before attempting write.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are a few driver fixes for char/misc drivers that resolve reported issues. All have been in linux-next successfully for a few days" * tag 'char-misc-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts Tools: hv: Handle the case when the target file exists correctly vme_tsi148: Utilize to_pci_dev() macro vme_tsi148: Fix PCI address mapping assumption vme_tsi148: Fix typo in tsi148_slave_get() w1: avoid recursive device_add w1: fix netlink refcnt leak on error path misc: Grammar s/addition/additional/ drivers: mcb: fix memory leak in chameleon_parse_cells() error path mei: ignore client writing state during cb completion mei: me: do not load the driver if the FW doesn't support MEI interface GenWQE: Increase driver version number GenWQE: Fix multithreading problems GenWQE: Ensure rc is not returning an uninitialized value GenWQE: Add wmb before DDCB is started GenWQE: Enable access to VPD flash area
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some driver core fixes for 3.15-rc2. Also in here are some documentation updates, as well as an API removal that had to wait for after -rc1 due to the cleanups coming into you from multiple developer trees (this one and the PPC tree.) All have been in linux next successfully" * tag 'driver-core-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base/dd.c incorrect pr_debug() parameters Documentation: Update stable address in Chinese and Japanese translations topology: Fix compilation warning when not in SMP Chinese: add translation of io_ordering.txt stable_kernel_rules: spelling/word usage sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner() kernfs: protect lazy kernfs_iattrs allocation with mutex fs: Don't return 0 from get_anon_bdev
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are a few staging driver fixes for issues that have been reported for 3.15-rc2. Also dominating the diffstat for the pull request is the removal of the rtl8187se driver. It's no longer needed in staging as a "real" driver for this hardware is now merged in the tree in the "correct" location in drivers/net/ All of these patches have been tested in linux-next" * tag 'staging-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Fix case where ethtype was never obtained and always be checked against 0 staging: r8712u: Fix case where ethtype was never obtained and always be checked against 0 staging: r8188eu: Calling rtw_get_stainfo() with a NULL sta_addr will return NULL staging: comedi: fix circular locking dependency in comedi_mmap() staging: r8723au: Add missing initialization of change_inx in sort algorithm Staging: unisys: use after free in list_for_each() staging: unisys: use after free in error messages staging: speakup: fix misuse of kstrtol() in handle_goto() staging: goldfish: Call free_irq in error path staging: delete rtl8187se wireless driver staging: rtl8723au: Fix buffer overflow in rtw_get_wfd_ie() staging: gs_fpgaboot: remove __TIMESTAMP__ macro staging: vme: fix memory leak in vme_user_probe() staging: fpgaboot: clean up Makefile staging/usbip: fix store_attach() sscanf return value check staging/usbip: userspace - fix usbipd SIGSEGV from refresh_exported_devices() staging: rtl8188eu: remove spaces, correct counts to unbreak P2P ioctls staging/rtl8821ae: Fix OOM handling in _rtl_init_deferred_work()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty/serial driver fixes for 3.15-rc2. Also in here are some Documentation file removals for drivers that we removed a long time ago, no need to keep it around any longer. All of these have been in linux-next for a bit" * tag 'tty-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250, disable "too much work" messages" serial: amba-pl011: fix regression, causing an Oops on rmmod tty: Fix help text of SYNCLINK_CS tty: fix memleak in alloc_pid ttyprintk: Allow built as a module ttyprintk: Fix wrong tty_unregister_driver() call in the error path serial: 8250, disable "too much work" messages Documentation/serial: Delete obsolete driver documentation serial: omap: Fix missing pm_runtime_resume handling by simplifying code serial_core: Fix pm imbalance on unbind serial: pl011: change Rx burst size to half of trigger level serial: timberdale: Depend on X86_32 serial: st-asc: Fix SysRq char handling Revert "serial: clps711x: Give a chance to perform useful tasks during wait loop" serial_core: Fix conditional start_tx on ring buffer not empty serial: efm32: use $vendor,$device scheme for compatible string serial: omap: free the wakeup settings in remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a number of tiny USB fixes and new device ids for 3.15-rc2. Nothing major, just issues some people have reported. All of these have been in linux-next" * tag 'usb-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: uas: fix deadlocky memory allocations uas: fix error handling during scsi_scan() uas: fix GFP_NOIO under spinlock uwb: adds missing error handling USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driver USB: ohci-jz4740: FEAT_POWER is a port feature, not a hub feature USB: ohci-jz4740: Fix uninitialized variable warning USB: EHCI: tegra: set txfill_tuning usb: ehci-platform: Return immediately from suspend if ehci_suspend fails usb: ehci-exynos: Return immediately from suspend if ehci_suspend fails USB: fix crash during hotplug of PCI USB controller card USB: cdc-acm: fix double usb_autopm_put_interface() in acm_port_activate() usb: usb-common: fix typo for usb_state_string USB: usb_wwan: fix handling of missing bulk endpoints USB: pl2303: add ids for Hewlett-Packard HP POS pole displays USB: cp210x: Add 8281 (Nanotec Plug & Drive) usb: option driver, add support for Telit UE910v2 Revert "USB: serial: add usbid for dell wwan card to sierra.c" USB: serial: ftdi_sio: add id for Brainboxes serial cards
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: thp: close race between split and zap huge pages mm: fix new kernel-doc warning in filemap.c mm: fix CONFIG_DEBUG_VM_RB description mm: use paravirt friendly ops for NUMA hinting ptes mips: export flush_icache_range mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages() wait: explain the shadowing and type inconsistencies Shiraz has moved Documentation/vm/numa_memory_policy.txt: fix wrong document in numa_memory_policy.txt powerpc/mm: fix ".__node_distance" undefined kernel/watchdog.c:touch_softlockup_watchdog(): use raw_cpu_write() init/Kconfig: move the trusted keyring config option to general setup vmscan: reclaim_clean_pages_from_list() must use mod_zone_page_state()
-
由 Kirill A. Shutemov 提交于
Sasha Levin has reported two THP BUGs[1][2]. I believe both of them have the same root cause. Let's look to them one by one. The first bug[1] is "kernel BUG at mm/huge_memory.c:1829!". It's BUG_ON(mapcount != page_mapcount(page)) in __split_huge_page(). From my testing I see that page_mapcount() is higher than mapcount here. I think it happens due to race between zap_huge_pmd() and page_check_address_pmd(). page_check_address_pmd() misses PMD which is under zap: CPU0 CPU1 zap_huge_pmd() pmdp_get_and_clear() __split_huge_page() anon_vma_interval_tree_foreach() __split_huge_page_splitting() page_check_address_pmd() mm_find_pmd() /* * We check if PMD present without taking ptl: no * serialization against zap_huge_pmd(). We miss this PMD, * it's not accounted to 'mapcount' in __split_huge_page(). */ pmd_present(pmd) == 0 BUG_ON(mapcount != page_mapcount(page)) // CRASH!!! page_remove_rmap(page) atomic_add_negative(-1, &page->_mapcount) The second bug[2] is "kernel BUG at mm/huge_memory.c:1371!". It's VM_BUG_ON_PAGE(!PageHead(page), page) in zap_huge_pmd(). This happens in similar way: CPU0 CPU1 zap_huge_pmd() pmdp_get_and_clear() page_remove_rmap(page) atomic_add_negative(-1, &page->_mapcount) __split_huge_page() anon_vma_interval_tree_foreach() __split_huge_page_splitting() page_check_address_pmd() mm_find_pmd() pmd_present(pmd) == 0 /* The same comment as above */ /* * No crash this time since we already decremented page->_mapcount in * zap_huge_pmd(). */ BUG_ON(mapcount != page_mapcount(page)) /* * We split the compound page here into small pages without * serialization against zap_huge_pmd() */ __split_huge_page_refcount() VM_BUG_ON_PAGE(!PageHead(page), page); // CRASH!!! So my understanding the problem is pmd_present() check in mm_find_pmd() without taking page table lock. The bug was introduced by me commit with commit 117b0791. Sorry for that. :( Let's open code mm_find_pmd() in page_check_address_pmd() and do the check under page table lock. Note that __page_check_address() does the same for PTE entires if sync != 0. I've stress tested split and zap code paths for 36+ hours by now and don't see crashes with the patch applied. Before it took <20 min to trigger the first bug and few hours for second one (if we ignore first). [1] https://lkml.kernel.org/g/<53440991.9090001@oracle.com> [2] https://lkml.kernel.org/g/<5310C56C.60709@oracle.com> Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: NSasha Levin <sasha.levin@oracle.com> Tested-by: NSasha Levin <sasha.levin@oracle.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Dave Jones <davej@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning in mm/filemap.c: Warning(mm/filemap.c:2600): Excess function parameter 'ppos' description in '__generic_file_aio_write' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
This appears to be a copy/paste error. Update the description to reflect extra rbtree debug and checks for the config option instead of duplicating CONFIG_DEBUG_VM. Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
David Vrabel identified a regression when using automatic NUMA balancing under Xen whereby page table entries were getting corrupted due to the use of native PTE operations. Quoting him Xen PV guest page tables require that their entries use machine addresses if the preset bit (_PAGE_PRESENT) is set, and (for successful migration) non-present PTEs must use pseudo-physical addresses. This is because on migration MFNs in present PTEs are translated to PFNs (canonicalised) so they may be translated back to the new MFN in the destination domain (uncanonicalised). pte_mknonnuma(), pmd_mknonnuma(), pte_mknuma() and pmd_mknuma() set and clear the _PAGE_PRESENT bit using pte_set_flags(), pte_clear_flags(), etc. In a Xen PV guest, these functions must translate MFNs to PFNs when clearing _PAGE_PRESENT and translate PFNs to MFNs when setting _PAGE_PRESENT. His suggested fix converted p[te|md]_[set|clear]_flags to using paravirt-friendly ops but this is overkill. He suggested an alternative of using p[te|md]_modify in the NUMA page table operations but this is does more work than necessary and would require looking up a VMA for protections. This patch modifies the NUMA page table operations to use paravirt friendly operations to set/clear the flags of interest. Unfortunately this will take a performance hit when updating the PTEs on CONFIG_PARAVIRT but I do not see a way around it that does not break Xen. Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NDavid Vrabel <david.vrabel@citrix.com> Tested-by: NDavid Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
The lkdtm module performs tests against executable memory ranges, so it needs to flush the icache for proper behaviors. Other architectures already export this, so do the same for MIPS. [akpm@linux-foundation.org: relocate export sites] Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: John Crispin <blogic@openwrt.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mizuma, Masayoshi 提交于
soft lockup in freeing gigantic hugepage fixed in commit 55f67141 "mm: hugetlb: fix softlockup when a large number of hugepages are freed." can happen in return_unused_surplus_pages(), so let's fix it. Signed-off-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Stick in a comment before someone else tries to fix the sparse warning this generates. Suggested-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-o2ro6f3vkxklni0bc8f7m68s@git.kernel.orgSigned-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-