- 29 10月, 2013 3 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch adds the filter chain type which is required to create filter chains in the bridge family from userspace. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Tomasz Bursztyka 提交于
This patch fixes this: CHECK net/netfilter/nft_nat.c net/netfilter/nft_nat.c:50:43: warning: incorrect type in assignment (different base types) net/netfilter/nft_nat.c:50:43: expected restricted __be32 [addressable] [usertype] ip net/netfilter/nft_nat.c:50:43: got unsigned int [unsigned] [usertype] <noident> net/netfilter/nft_nat.c:51:43: warning: incorrect type in assignment (different base types) net/netfilter/nft_nat.c:51:43: expected restricted __be32 [addressable] [usertype] ip net/netfilter/nft_nat.c:51:43: got unsigned int [unsigned] [usertype] <noident> net/netfilter/nft_nat.c:65:37: warning: incorrect type in assignment (different base types) net/netfilter/nft_nat.c:65:37: expected restricted __be16 [addressable] [assigned] [usertype] all net/netfilter/nft_nat.c:65:37: got unsigned int [unsigned] <noident> net/netfilter/nft_nat.c:66:37: warning: incorrect type in assignment (different base types) net/netfilter/nft_nat.c:66:37: expected restricted __be16 [addressable] [assigned] [usertype] all net/netfilter/nft_nat.c:66:37: got unsigned int [unsigned] <noident> Signed-off-by: NTomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
when CONFIG_NF_TABLES[_MODULE] is not enabled, but CONFIG_NF_TABLES_BRIDGE is enabled: net/bridge/netfilter/nf_tables_bridge.c: In function 'nf_tables_bridge_init_net': net/bridge/netfilter/nf_tables_bridge.c:24:5: error: 'struct net' has no member named 'nft' net/bridge/netfilter/nf_tables_bridge.c:25:9: error: 'struct net' has no member named 'nft' net/bridge/netfilter/nf_tables_bridge.c:28:2: error: 'struct net' has no member named 'nft' net/bridge/netfilter/nf_tables_bridge.c:30:34: error: 'struct net' has no member named 'nft' net/bridge/netfilter/nf_tables_bridge.c:35:11: error: 'struct net' has no member named 'nft' net/bridge/netfilter/nf_tables_bridge.c: In function 'nf_tables_bridge_exit_net': net/bridge/netfilter/nf_tables_bridge.c:41:27: error: 'struct net' has no member named 'nft' net/bridge/netfilter/nf_tables_bridge.c:42:11: error: 'struct net' has no member named 'nft' Reported-by: NRandy Dunlap <rdunlap@infradead.org> Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 18 10月, 2013 21 次提交
-
-
由 Randy Dunlap 提交于
Fix (a few hundred) build errors due to missing semi-colon when KMEMCHECK is enabled: include/net/inet_timewait_sock.h:139:2: error: expected ',', ';' or '}' before 'int' include/net/inet_timewait_sock.h:148:28: error: 'const struct inet_timewait_sock' has no member named 'tw_death_node' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
xen-netback: IPv6 offload support ==================== This patch series adds support for checksum and large packet offloads into xen-netback. Testing has mainly been done using the Microsoft network hardware certification suite running in Server 2008R2 VMs with Citrix PV frontends. v2: - Fixed Wei's email address in Cc lines v3: - Responded to Wei's comments: - netif.h now updated with comments and a definition of XEN_NETIF_GSO_TYPE_NONE. - limited number of pullups - Responded to Annie's comments: - New GSO_BIT macro v4: - Responded to more of Wei's comments - Remove parsing of IPv6 fragment header and added warning v5: - Added comment concerning the value chosen for PKT_PROT_LEN - Dropped deprecation of feature-no-csum-offload ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
This patch adds code to handle SKB_GSO_TCPV6 skbs and construct appropriate extra or prefix segments to pass the large packet to the frontend. New xenstore flags, feature-gso-tcpv6 and feature-gso-tcpv6-prefix, are sampled to determine if the frontend is capable of handling such packets. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
This patch adds a xenstore feature flag, festure-gso-tcpv6, to advertise that netback can handle IPv6 TCP GSO packets. It creates SKB_GSO_TCPV6 skbs if the frontend passes an extra segment with the new type XEN_NETIF_GSO_TYPE_TCPV6 added to netif.h. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
There is no mechanism to insist that a guest always generates a packet with good checksum (at least for IPv4) so we must handle checksum offloading from the guest and hence should set NETIF_F_RXCSUM. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
For performance of VM to VM traffic on a single host it is better to avoid calculation of TCP/UDP checksum in the sending frontend. To allow this this patch adds the code necessary to set up partial checksum for IPv6 packets and xenstore flag feature-ipv6-csum-offload to advertise that fact to frontends. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
Check xenstore flag feature-ipv6-csum-offload to determine if a guest is happy to accept IPv6 packets with only partial checksum. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
bonding: patchset for rcu use in bonding ==================== The Patch Set convert the xmit of 3ad and alb mode to use rcu lock. dd rtnl lock and remove read lock for bond sysfs. v2 because the bond_for_each_slave_rcu without rcu_read_lock() will occurs one warming, so add new function for alb xmit path to avoid warming. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The bond_for_each_slave() will not be protected by read_lock(), only protected by rtnl_lock(), so need to replace read_lock() with rtnl_lock(). Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The commit 278b2083 (bonding: initial RCU conversion) has convert the roundrobin, active-backup, broadcast and xor xmit path to rcu protection, the performance will be better for these mode, so this time, convert xmit path for alb mode. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Cc: Nikolay Aleksandrov <nikolay@redhat.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The commit 278b2083 (bonding: initial RCU conversion) has convert the roundrobin, active-backup, broadcast and xor xmit path to rcu protection, the performance will be better for these mode, so this time, convert xmit path for 3ad mode. Suggested-by: NNikolay Aleksandrov <nikolay@redhat.com> Suggested-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NWang Yufen <wangyufen@huawei.com> Cc: Nikolay Aleksandrov <nikolay@redhat.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nftables由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== netfilter updates: nf_tables pull request The following patchset contains the current original nf_tables tree condensed in 17 patches. I have organized them by chronogical order since the original nf_tables code was released in 2009 and by dependencies between the different patches. The patches are: 1) Adapt all existing hooks in the tree to pass hook ops to the hook callback function, required by nf_tables, from Patrick McHardy. 2) Move alloc_null_binding to nf_nat_core, as it is now also needed by nf_tables and ip_tables, original patch from Patrick McHardy but required major changes to adapt it to the current tree that I made. 3) Add nf_tables core, including the netlink API, the packet filtering engine, expressions and built-in tables, from Patrick McHardy. This patch includes accumulated fixes since 2009 and minor enhancements. The patch description contains a list of references to the original patches for the record. For those that are not familiar to the original work, see [1], [2] and [3]. 4) Add netlink set API, this replaces the original set infrastructure to introduce a netlink API to add/delete sets and to add/delete set elements. This includes two set types: the hash and the rb-tree sets (used for interval based matching). The main difference with ipset is that this infrastructure is data type agnostic. Patch from Patrick McHardy. 5) Allow expression operation overload, this API change allows us to provide define expression subtypes depending on the configuration that is received from user-space via Netlink. It is used by follow up patches to provide optimized versions of the payload and cmp expressions and the x_tables compatibility layer, from Patrick McHardy. 6) Add optimized data comparison operation, it requires the previous patch, from Patrick McHardy. 7) Add optimized payload implementation, it requires patch 5, from Patrick McHardy. 8) Convert built-in tables to chain types. Each chain type have special semantics (filter, route and nat) that are used by userspace to configure the chain behaviour. The main chain regarding iptables is that tables become containers of chain, with no specific semantics. However, you may still configure your tables and chains to retain iptables like semantics, patch from me. 9) Add compatibility layer for x_tables. This patch adds support to use all existing x_tables extensions from nf_tables, this is used to provide a userspace utility that accepts iptables syntax but used internally the nf_tables kernel core. This patch includes missing features in the nf_tables core such as the per-chain stats, default chain policy and number of chain references, which are required by the iptables compatibility userspace tool. Patch from me. 10) Fix transport protocol matching, this fix is a side effect of the x_tables compatibility layer, which now provides a pointer to the transport header, from me. 11) Add support for dormant tables, this feature allows you to disable all chains and rules that are contained in one table, from me. 12) Add IPv6 NAT support. At the time nf_tables was made, there was no NAT IPv6 support yet, from Tomasz Bursztyka. 13) Complete net namespace support. This patch register the protocol family per net namespace, so tables (thus, other objects contained in tables such as sets, chains and rules) are only visible from the corresponding net namespace, from me. 14) Add the insert operation to the nf_tables netlink API, this requires adding a new position attribute that allow us to locate where in the ruleset a rule needs to be inserted, from Eric Leblond. 15) Add rule batching support, including atomic rule-set updates by using rule-set generations. This patch includes a change to nfnetlink to include two new control messages to indicate the beginning and the end of a batch. The end message is interpreted as the commit message, if it's missing, then the rule-set updates contained in the batch are aborted, from me. 16) Add trace support to the nf_tables packet filtering core, from me. 17) Add ARP filtering support, original patch from Patrick McHardy, but adapted to fit into the chain type infrastructure. This was recovered to be used by nft userspace tool and our compatibility arptables userspace tool. There is still work to do to fully replace x_tables [4] [5] but that can be done incrementally by extending our netlink API. Moreover, looking at netfilter-devel and the amount of contributions to nf_tables we've been getting, I think it would be good to have it mainstream to avoid accumulating large patchsets skip continuous rebases. I tried to provide a reasonable patchset, we have more than 100 accumulated patches in the original nf_tables tree, so I collapsed many of the small fixes to the main patch we had since 2009 and provide a small batch for review to netdev, while trying to retain part of the history. For those who didn't give a try to nf_tables yet, there's a quick howto available from Eric Leblond that describes how to get things working [6]. Comments/reviews welcome. Thanks! [1] http://lwn.net/Articles/324251/ [2] http://workshop.netfilter.org/2013/wiki/images/e/ee/Nftables-osd-2013-developer.pdf [3] http://lwn.net/Articles/564095/ [4] http://people.netfilter.org/pablo/map-pending-work.txt [4] http://people.netfilter.org/pablo/nftables-todo.txt [5] https://home.regit.org/netfilter-en/nftables-quick-howto/ ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Opdenacker 提交于
This patch removes a comment mentioning IRQF_DISABLED, which is deprecated. Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Opdenacker 提交于
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Amir Vadai says: ==================== net/mlx4: Mellanox driver update 15-10-2013 This patchset contains small code cleaning patches, and a patch to make mlx4_core use module_request() in order to load the relevant link layer module (mlx4_en or mlx4_ib) according to the port type. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eyal Perry 提交于
Mellanox ConnectX architecture is: mlx4_core is the lower level PCI driver which register on the PCI id, and protocol specific drivers are depended on it: mlx4_en - for Ethernet and mlx4_ib for Infiniband. NIC could have multiple ports which can change their type dynamically. We use the request_module() call to load the relevant protocol driver when needed: on loading time or at port type change event. Signed-off-by: NEyal Perry <eyalpe@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Clean up warning added by commit fe6f700d "net/mlx4_core: Respond to operation request by firmware". Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Small code cleanup: 1. change MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN to MLX4_DEV_CAP_FLAG2_REASSIGN_MAC_EN 2. put MLX4_SET_PORT_PRIO2TC and MLX4_SET_PORT_SCHEDULER in the same union with the other MLX4_SET_PORT_yyy Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Remove code that triggers trivial build warnings. drivers/net/ethernet/mellanox/mlx4/cmd.c: In function ‘mlx4_set_vf_vlan’: drivers/net/ethernet/mellanox/mlx4/cmd.c:2256: warning: variable ‘vf_oper’ set but not used drivers/net/ethernet/mellanox/mlx4/mcg.c: In function ‘mlx4_map_sw_to_hw_steering_mode’: drivers/net/ethernet/mellanox/mlx4/mcg.c:648: warning: comparison of unsigned expression < 0 is always false drivers/net/ethernet/mellanox/mlx4/mcg.c: In function ‘mlx4_map_sw_to_hw_steering_id’: drivers/net/ethernet/mellanox/mlx4/mcg.c:685: warning: comparison of unsigned expression < 0 is always false drivers/net/ethernet/mellanox/mlx4/mcg.c: In function ‘mlx4_hw_rule_sz’: drivers/net/ethernet/mellanox/mlx4/mcg.c:712: warning: comparison of unsigned expression < 0 is always false drivers/net/ethernet/mellanox/mlx4/fw.c: In function ‘mlx4_opreq_action’: drivers/net/ethernet/mellanox/mlx4/fw.c:1732: warning: variable ‘type_m’ set but not used drivers/net/ethernet/mellanox/mlx4/srq.c:302: warning: no previous prototype for ‘mlx4_srq_lookup’ Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TCP listener refactoring, part 6 : Use sock_gen_put() from inet_diag_dump_one_icsk() for future SYN_RECV support. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Included changes: - ensure RecordRoute information is added to BAT_ICMP echo_request/reply only - use VLAN_ETH_HLEN when possible - use htons when possible - substitute old fragmentation code with a new improved implementation by Martin Hundebøll - create common header for BAT_ICMP packets to improve extendibility - consider the network coding overhead when computing the overall room needed by batman headers - add dummy soft-interface rx mode handler - minor code refactoring and cleanups Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2013 9 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch registers the ARP family and he filter chain type for this family. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch adds support for tracing the packet travel through the ruleset, in a similar fashion to x_tables. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch adds a batch support to nfnetlink. Basically, it adds two new control messages: * NFNL_MSG_BATCH_BEGIN, that indicates the beginning of a batch, the nfgenmsg->res_id indicates the nfnetlink subsystem ID. * NFNL_MSG_BATCH_END, that results in the invocation of the ss->commit callback function. If not specified or an error ocurred in the batch, the ss->abort function is invoked instead. The end message represents the commit operation in nftables, the lack of end message results in an abort. This patch also adds the .call_batch function that is only called from the batch receival path. This patch adds atomic rule updates and dumps based on bitmask generations. This allows to atomically commit a set of rule-set updates incrementally without altering the internal state of existing nf_tables expressions/matches/targets. The idea consists of using a generation cursor of 1 bit and a bitmask of 2 bits per rule. Assuming the gencursor is 0, then the genmask (expressed as a bitmask) can be interpreted as: 00 active in the present, will be active in the next generation. 01 inactive in the present, will be active in the next generation. 10 active in the present, will be deleted in the next generation. ^ gencursor Once you invoke the transition to the next generation, the global gencursor is updated: 00 active in the present, will be active in the next generation. 01 active in the present, needs to zero its future, it becomes 00. 10 inactive in the present, delete now. ^ gencursor If a dump is in progress and nf_tables enters a new generation, the dump will stop and return -EBUSY to let userspace know that it has to retry again. In order to invalidate dumps, a global genctr counter is increased everytime nf_tables enters a new generation. This new operation can be used from the user-space utility that controls the firewall, eg. nft -f restore The rule updates contained in `file' will be applied atomically. cat file ----- add filter INPUT ip saddr 1.1.1.1 counter accept #1 del filter INPUT ip daddr 2.2.2.2 counter drop #2 -EOF- Note that the rule 1 will be inactive until the transition to the next generation, the rule 2 will be evicted in the next generation. There is a penalty during the rule update due to the branch misprediction in the packet matching framework. But that should be quickly resolved once the iteration over the commit list that contain rules that require updates is finished. Event notification happens once the rule-set update has been committed. So we skip notifications is case the rule-set update is aborted, which can happen in case that the rule-set is tested to apply correctly. This patch squashed the following patches from Pablo: * nf_tables: atomic rule updates and dumps * nf_tables: get rid of per rule list_head for commits * nf_tables: use per netns commit list * nfnetlink: add batch support and use it from nf_tables * nf_tables: all rule updates are transactional * nf_tables: attach replacement rule after stale one * nf_tables: do not allow deletion/replacement of stale rules * nf_tables: remove unused NFTA_RULE_FLAGS Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Eric Leblond 提交于
This patch adds a new rule attribute NFTA_RULE_POSITION which is used to store the position of a rule relatively to the others. By providing the create command and specifying the position, the rule is inserted after the rule with the handle equal to the provided position. Regarding notification, the position attribute specifies the handle of the previous rule to make sure we don't point to any stale rule in notifications coming from the commit path. This patch includes the following fix from Pablo: * nf_tables: fix rule deletion event reporting Signed-off-by: NEric Leblond <eric@regit.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Register family per netnamespace to ensure that sets are only visible in its approapriate namespace. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Tomasz Bursztyka 提交于
This patch generalizes the NAT expression to support both IPv4 and IPv6 using the existing IPv4/IPv6 NAT infrastructure. This also adds the NAT chain type for IPv6. This patch collapses the following patches that were posted to the netfilter-devel mailing list, from Tomasz: * nf_tables: Change NFTA_NAT_ attributes to better semantic significance * nf_tables: Split IPv4 NAT into NAT expression and IPv4 NAT chain * nf_tables: Add support for IPv6 NAT expression * nf_tables: Add support for IPv6 NAT chain * nf_tables: Fix up build issue on IPv6 NAT support And, from Pablo Neira Ayuso: * fix missing dependencies in nft_chain_nat Signed-off-by: NTomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch allows you to temporarily disable an entire table. You can change the state of a dormant table via NFT_MSG_NEWTABLE messages. Using this operation you can wake up a table, so their chains are registered. This provides atomicity at chain level. Thus, the rule-set of one chain is applied at once, avoiding any possible intermediate state in every chain. Still, the chains that belongs to a table are registered consecutively. This also allows you to have inactive tables in the kernel. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
We cannot use skb->transport_header since it's unset, use pkt->xt.thoff instead. Now possible using information made available through the x_tables compatibility layer. Reported-by: NEric Leblond <eric@regit.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch adds the x_tables compatibility layer. This allows you to use existing x_tables matches and targets from nf_tables. This compatibility later allows us to use existing matches/targets for features that are still missing in nf_tables. We can progressively replace them with native nf_tables extensions. It also provides the userspace compatibility software that allows you to express the rule-set using the iptables syntax but using the nf_tables kernel components. In order to get this compatibility layer working, I've done the following things: * add NFNL_SUBSYS_NFT_COMPAT: this new nfnetlink subsystem is used to query the x_tables match/target revision, so we don't need to use the native x_table getsockopt interface. * emulate xt structures: this required extending the struct nft_pktinfo to include the fragment offset, which is already obtained from ip[6]_tables and that is used by some matches/targets. * add support for default policy to base chains, required to emulate x_tables. * add NFTA_CHAIN_USE attribute to obtain the number of references to chains, required by x_tables emulation. * add chain packet/byte counters using per-cpu. * support 32-64 bits compat. For historical reasons, this patch includes the following patches that were posted in the netfilter-devel mailing list. From Pablo Neira Ayuso: * nf_tables: add default policy to base chains * netfilter: nf_tables: add NFTA_CHAIN_USE attribute * nf_tables: nft_compat: private data of target and matches in contiguous area * nf_tables: validate hooks for compat match/target * nf_tables: nft_compat: release cached matches/targets * nf_tables: x_tables support as a compile time option * nf_tables: fix alias for xtables over nftables module * nf_tables: add packet and byte counters per chain * nf_tables: fix per-chain counter stats if no counters are passed * nf_tables: don't bump chain stats * nf_tables: add protocol and flags for xtables over nf_tables * nf_tables: add ip[6]t_entry emulation * nf_tables: move specific layer 3 compat code to nf_tables_ipv[4|6] * nf_tables: support 32bits-64bits x_tables compat * nf_tables: fix compilation if CONFIG_COMPAT is disabled From Patrick McHardy: * nf_tables: move policy to struct nft_base_chain * nf_tables: send notifications for base chain policy changes From Alexander Primak: * nf_tables: remove the duplicate NF_INET_LOCAL_OUT From Nicolas Dichtel: * nf_tables: fix compilation when nf-netlink is a module Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 14 10月, 2013 7 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch converts built-in tables/chains to chain types that allows you to deploy customized table and chain configurations from userspace. After this patch, you have to specify the chain type when creating a new chain: add chain ip filter output { type filter hook input priority 0; } ^^^^ ------ The existing chain types after this patch are: filter, route and nat. Note that tables are just containers of chains with no specific semantics, which is a significant change with regards to iptables. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
Add an optimized payload expression implementation for small (up to 4 bytes) aligned data loads from the linear packet area. This patch also includes original Patrick McHardy's entitled (nf_tables: inline nft_payload_fast_eval() into main evaluation loop). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
Add an optimized version of nft_data_cmp() that only handles values of to 4 bytes length. This patch includes original Patrick McHardy's patch entitled (nf_tables: inline nft_cmp_fast_eval() into main evaluation loop). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
Split the expression ops into two parts and support overloading of the runtime expression ops based on the requested function through a ->select_ops() callback. This can be used to provide optimized implementations, for instance for loading small aligned amounts of data from the packet or inlining frequently used operations into the main evaluation loop. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
This patch adds the new netlink API for maintaining nf_tables sets independently of the ruleset. The API supports the following operations: - creation of sets - deletion of sets - querying of specific sets - dumping of all sets - addition of set elements - removal of set elements - dumping of all set elements Sets are identified by name, each table defines an individual namespace. The name of a set may be allocated automatically, this is mostly useful in combination with the NFT_SET_ANONYMOUS flag, which destroys a set automatically once the last reference has been released. Sets can be marked constant, meaning they're not allowed to change while linked to a rule. This allows to perform lockless operation for set types that would otherwise require locking. Additionally, if the implementation supports it, sets can (as before) be used as maps, associating a data value with each key (or range), by specifying the NFT_SET_MAP flag and can be used for interval queries by specifying the NFT_SET_INTERVAL flag. Set elements are added and removed incrementally. All element operations support batching, reducing netlink message and set lookup overhead. The old "set" and "hash" expressions are replaced by a generic "lookup" expression, which binds to the specified set. Userspace is not aware of the actual set implementation used by the kernel anymore, all configuration options are generic. Currently the implementation selection logic is largely missing and the kernel will simply use the first registered implementation supporting the requested operation. Eventually, the plan is to have userspace supply a description of the data characteristics and select the implementation based on expected performance and memory use. This patch includes the new 'lookup' expression to look up for element matching in the set. This patch includes kernel-doc descriptions for this set API and it also includes the following fixes. From Patrick McHardy: * netfilter: nf_tables: fix set element data type in dumps * netfilter: nf_tables: fix indentation of struct nft_set_elem comments * netfilter: nf_tables: fix oops in nft_validate_data_load() * netfilter: nf_tables: fix oops while listing sets of built-in tables * netfilter: nf_tables: destroy anonymous sets immediately if binding fails * netfilter: nf_tables: propagate context to set iter callback * netfilter: nf_tables: add loop detection From Pablo Neira Ayuso: * netfilter: nf_tables: allow to dump all existing sets * netfilter: nf_tables: fix wrong type for flags variable in newelem Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Similar to nat_decode_session, alloc_null_binding is needed for both ip_tables and nf_tables, so move it to nf_nat_core.c. This change is required by nf_tables. This is an adapted version of the original patch from Patrick McHardy. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-