We used cache_line as cache_line_lenght. For this reason
we did cache flushing 4 times longer than was necessary.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Till this patch reset always perform writen to 1.
Now we can use negative logic and perform reset write to 0.

It is opposite level than is currently read from that pin
Signed-off-by: NMichal Simek <monstr@monstr.eu>

I had to change message for gpio-reset because I always
not to see it. Prefix RESET is big and visible.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Saving is done in SAVE_STATE macros that's why another save discard
previous saved value.

This change has no effect to normal programs because they ends in any exception
and they are killed. On the other side has effect on debugging.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Configuring DEBUG_SLAB causes a noMMU kernel to die during initialization
with an invalid virtual address panic in kfree_debugcheck().
The panic is due to an improper definition of pfn_valid().
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This patch add support for dynamic function graph tracer.

There is one my expactation that I can do flush_icache after
all code modification. On microblaze is this safer than do
flush for every entry. For icache is used name flush but
correct should be invalidation - this will be fix in upcomming
new cache implementaion and WB support.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

For more information look at Documentation/trace folder.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

With dynamic function tracer, by default, _mcount is defined as an
"empty" function, it returns directly without any more action. When
enabling it in user-space, it will jump to a real tracing
function(ftrace_caller), and do the real job for us.

Differ from the static function tracer, dynamic function tracer provides
two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the
tracing of some indicated kernel functions(set_ftrace_filter).

In the kernel version, there is only one "_mcount" string for every
kernel function, so, we just need to match this one in mcount_regex of
scripts/recordmcount.pl.

For more information please look at code and Documentation/trace folder.

Steven ACK that scripts/recordmcount.pl part.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Implement MCOUNT_TEST in asm code - it is faster than use
generic code
Signed-off-by: NMichal Simek <monstr@monstr.eu>

If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to
_mcount will be inserted into each kernel function. so, there is a
possibility to trace the kernel functions in _mcount.

This patch add the specific _mcount support for static function
tracing. by default, ftrace_trace_function is initialized as
ftrace_stub(an empty function), so, the default _mcount will introduce
very little overhead. after enabling ftrace in user-space, it will jump
to a real tracing function and do static function tracing for us.

Commit message from Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

There are just two major changes
Renamed local_irq functions to raw_local_irq in irq.c.
Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug.

Look at Documentation/irqflags-tracing.txt
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze needs to do lock_init very soon because MMU init calls lock functions.

Here is the explanation from Peter Zijlstra why we have to enable
__ARCH_WANTS_INTERRUPTS_ON_CTSW.

"So we schedule while holding rq->lock (for obvious reasons), but since
lockdep tracks held locks per tasks, we need to transfer the held state
from the prev to the next task. We do this by explicity calling
spin_release(&rq->lock) in context_switch() right before switch_to(),
and calling spin_acquire(&rq->lock) in
finish_task_switch()->finish_lock_switch().

Now, for some reason lockdep thinks that interrupts got enabled over the
context switch (git grep __ARCH_WANTS_INTERRUPTS_ON_CTSW arch/microblaze
doesn't seem to turn up anything).

Clearly trying to acquire the rq->lock with interrupts enabled is a bad
idea and lockdep warns you about this."
Signed-off-by: NMichal Simek <monstr@monstr.eu>

It is the same counter as we use as free running one.
I would like to use it for ftrace.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This is working implemetation but the problem is that
Microblaze misses frame pointer that's why is there
big loop which trace and show all addresses which are in text.
It shows addresses which are in registers, etc.

This is problem and this is the reason why all Microblaze
traces are wrong. There is an option to do hacks and trace
the kernel code but this is too complicated.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

It is important for ftrace irqsoff support
Signed-off-by: NMichal Simek <monstr@monstr.eu>

The problem was that free_initmem pass to  free_initrd_mem got
bad aligned __init_begin symbol and free_initrd_mem don't care
about __init_end but take PAGE_SIZE instead.

Here is behavior in kernel bootlog.
ramdisk_execute_command from (init/main.c) was rewrite

Freeing unused kernel memory: 6224k freed
Failed to execute ��������������{���
Failed to execute ��������������{����.  Attempting defaults...
Mounting proc:
Mounting var:
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

New helper - sys_mmap_pgoff(); switch syscalls to using it.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Mtdblock driver doesn't call flush_dcache_page for pages in request.  So,
this causes problems on architectures where the icache doesn't fill from
the dcache or with dcache aliases.  The patch fixes this.

The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid
pointless empty cache-thrashing loops on architectures for which
flush_dcache_page() is a no-op.  Every architecture was provided with this
flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is
equal 1 or do nothing otherwise.

See "fix mtd_blkdevs problem with caches on some architectures" discussion
on LKML for more information.
Signed-off-by: NIlya Loginov <isloginov@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Horton <phorton@bitbox.co.uk>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Merge common code between Microblaze and PowerPC, and make it available
to Sparc
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge common prototypes used by Microblaze and PowerPC
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge common flattened device tree code between Microblaze and PowerPC
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge common code between Sparc, PowerPC and Microblaze.

Sparc differs in the implementation at this point, so this patch uses
a #ifdef to handle sparc differently for now.  The merging of
implementations will occur in a later patch
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge common code between Microblaze and PowerPC
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge common code between PowerPC and Microblaze
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge common code for working with Flattened Device Tree data structure
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Add a common header file for working with the flattened device tree
data structure and merge the shared data tags used by Microblaze and
PowerPC
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge of common code duplicated between Sparc, PowerPC and Microblaze
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge of common code duplicated between Sparc, PowerPC and Microblaze
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

In preparation to prune things out of the Sparc, PowerPC and Microblaze
asm/prom.h files, change the #include statements to ensure that
even if asm/prom.h is included first, linux/of.h gets to determine the
order in which files are processed.

This patch adds a #include <linux/of.h> to each of the prom.h files
*above* the multi-include protection macros to ensure that linux/of.h
can define things before prom.h gets processed.

At the end of the merge the cross dependencies between the files should
be gone and a sane #include scheme can be restored.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Meaning receive multiple messages, reducing the number of syscalls and
net stack entry/exit operations.

Next patches will introduce mechanisms where protocols that want to
optimize this operation will provide an unlocked_recvmsg operation.

This takes into account comments made by:

. Paul Moore: sock_recvmsg is called only for the first datagram,
  sock_recvmsg_nosec is used for the rest.

. Caitlin Bestler: recvmmsg now has a struct timespec timeout, that
  works in the same fashion as the ppoll one.

  If the underlying protocol returns a datagram with MSG_OOB set, this
  will make recvmmsg return right away with as many datagrams (+ the OOB
  one) it has received so far.

. Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen
  datagrams and then recvmsg returns an error, recvmmsg will return
  the successfully received datagrams, store the error and return it
  in the next call.

This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg,
where we will be able to acquire the lock only at batch start and end, not at
every underlying recvmsg call.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previous patch d63678d607d0e37ec7abe5ceb545d7e8aab956a4 clear
it for noMMU kernel. This one do it for MMU.

Correct noMMU version
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

I need to disable heartbeat function because this features
breaks testing in Qemu.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Instead of remembering to specify DTB= on the make commandline, this commit
allows the much friendlier make simpleImage.<dts>
where <dts>.dts is expected to be found in arch/microblaze/boot/dts/
The resulting vmlinux, with the compiled DTS linked in, will be copied to
boot/simpleImage.<dts>

This mirrors the same functionality as on PowerPC,
albeit achieving it in a slightly different way.

+ strip simpleImage file
The size of output file is very similar to linux.bin.

vmlinux - full elf without fdt blob
simpleImage.<dtb name>.unstrip - full elf with fdt blob
simpleImage.<dtb name> - stripped elf with fdt blob

Add symlink to generic system.dts in platform folder
Signed-off-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 96177299 ("Drop free_pages()")
modified nr_free_pages() to return 'unsigned long' instead of 'unsigned
int'.  This made the casts to 'unsigned long' in most callers superfluous,
so remove them.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <zankel@tensilica.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>