- 20 5月, 2011 1 次提交
-
-
由 Paul Mackerras 提交于
The vcpu->arch.pending_exceptions field is a bitfield indexed by interrupt priority number as returned by kvmppc_book3s_vec2irqprio. However, kvmppc_core_pending_dec was using an interrupt vector shifted by 7 as the bit index. Fix it to use the irqprio value for the decrementer interrupt instead. This problem was found by code inspection. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 19 5月, 2011 39 次提交
-
-
由 Sebastian Siewior 提交于
It seems that Adrian is getting old. He removed almost everything of GEMINI in commit c5365313 ("[POWERPC] Remove the broken Gemini support") except this piece. Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gabriel Paubert 提交于
[See http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-October/086424.html and followups. Part of the commit message is directly copied from that.] Commit 540c6c39 tries to find i8042 IRQs in the device-tree but doesn't fall back to the old hardcoded 1 and 12 in all failure cases. Specifically, the case where the device-tree contains nothing matching pnpPNP,303 or pnpPNP,f03 doesn't seem to be handled well. It sort of falls through to the old code, but leaves the IRQs set to 0. Signed-off-by: NGabriel Paubert <paubert@iram.es> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We keep track of the size of the lowest block of memory and call setup_initial_memory_limit() only after we've parsed them all Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMilton Miller <miltonm@bga.com>
-
由 Milton Miller 提交于
When using a property refering to the availibily of dynamic dma windows call it ddw_avail not ddr_avail. dupe_ddw_if_already_created does not dupilcate anything, it only finds and reuses the windows we already created, so rename it to find_existing_ddw. Also, it does not need the pci device node, so remove that argument. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Move the discovery of windows previously setup from when the pci driver calls set_dma_mask to an arch_initcall. When kexecing into a kernel with dynamic dma windows allocated, we need to find the windows early so that memory hot remove will be able to delete the tces mapping the to be removed memory and memory hotplug add will map the new memory into the window. We should not wait for the driver to be loaded and the device to be probed. The iommu init hooks are before kmalloc is setup, so defer to arch_initcall. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
If we destroy the window, we need to remove the property recording that we setup the window. Otherwise the next kernel we kexec will be confused. Also we should remove the property if even if we don't find the ibm,ddw-applicable window or if one of the property sizes is unexpected; presumably these came from a prior kernel via kexec, and we will not be maintaining the window with respect to memory hotplug. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Do not check dma supported until we have chosen the right dma ops. Check that the device is pci before treating it as such. Check the mask is supported by the selected dma ops before committing it. We only need to set iommu ops if it is not the current ops; this avoids searching the tree for the iommu table unnecessarily. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nishanth Aravamudan 提交于
Otherwise we get silent truncations. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Cc: Anton Blanchard <anton@samba.org> Cc: Milton Miller <miltonm@bga.com> Cc: linuxppc-dev@ozlabs.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ira Snyder 提交于
This adds support for programming the data processing FPGAs on the OVRO CARMA board. These FPGAs have a special programming sequence that requires that we program the Freescale DMA engine, which is only available inside the kernel. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ira Snyder 提交于
This driver allows userspace to access the data processing FPGAs on the OVRO CARMA board. It has two modes of operation: 1) random access This allows users to poke any DATA-FPGA registers by using mmap to map the address region directly into their memory map. 2) correlation dumping When correlating, the DATA-FPGA's have special requirements for getting the data out of their memory before the next correlation. This nominally happens at 64Hz (every 15.625ms). If the data is not dumped before the next correlation, data is lost. The data dumping driver handles buffering up to 1 second worth of correlation data from the FPGAs. This lowers the realtime scheduling requirements for the userspace process reading the device. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
When creating an irq, don't allow a concurent driver request until we have caled map, which will likley call set_chip_and_handler to change the irq_chip and its operations. Similarly, when tearing down an IRQ, make sure no new uses come along while we change the irq back to the nop chip and then reset the descriptor to freed status. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
The only references to the irq_map[].host field are internal to arch/powerpc/kernel/irq.c Signed-off-by: NMilton Miller <miltonm@bga.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Some irq_host implementations are using virq_to_host to check if they are the irq_host for a virtual irq. To allow us to make space versus time tradeoffs, replace this usage with an assertive virq_is_host that confirms or denies the irq is associated with the given irq_host. Signed-off-by: NMilton Miller <miltonm@bga.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Instead of checking for rogue msi numbers via the irq_map host field set the chip_data to h.host_data (which is the msic struct pointer) at map and compare it in get_irq. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Building on Grant's efforts to remove the irq_map array, this patch moves spider-pics use of virq_to_host() to use irq_data_get_chip_data and sets the irq chip data in the map call, like most other interrupt controllers in powerpc. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
It was called from irq_create_mapping if that was called for a host and hwirq that was previously mapped, "to update the flags". But the only implementation was in beat_interrupt and all it did was repeat a hypervisor call without error checking that was performed with error checking at the beginning of the map hook. In addition, the comment on the beat remap hook says it will only called once for a given mapping, which would apply to map not remap. All flags should be known by the time the match hook is called, before we call the map hook. Removing this mostly unused hook will simpify the requirements of irq_domain concept. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Create a dummy irq_host using the generic dummy irq chip for the secondary cpus to use. Create a direct irq mapping for the ipi and register the ipi action handler against it. If for some unlikely reason part of this fails then don't detect the secondary cpus. This removes another instance of NO_IRQ_IGNORE, records the ipi stats for the secondary cpus, and runs the ipi on the interrupt stack. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
If none of irq category bits were set mpc52xx_get_irq() would pass NO_IRQ_IGNORE (-1) to irq_linear_revmap, which does an unsigned compare and declares the interrupt above the linear map range. It then punts to irq_find_mapping, which performs a linear search of all irqs, which will likely miss and only then return NO_IRQ. If no status bit is set, then we should return NO_IRQ directly. The interrupt should not be suppressed from spurious counting, in fact that is the definition of supurious. Signed-off-by: NMilton Miller <miltonm@bga.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
As NO_IRQ_IGNORE is only used between the static function cpld_pic_get_irq and its caller cpld_pic_cascade, and cpld_pic_cascade only uses it to suppress calling handle_generic_irq, we can change these uses to NO_IRQ and remove the extra tests and pathlength in cpld_pic_cascade. Signed-off-by: NMilton Miller <miltonm@bga.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
handler_data should be reserved for flow handlers on the dependent irq, not consumed by the parent irq code that is part of the irq_chip code. The msi_data pointer was already set in msidesc->irqhost->hostdata and being copied to irq_data->chipdata in the msidesc->irqhost->map() method called via create_irq_mapping, so we can obtain the pointer from there and free the instance it in teardown_msi_irqs. Also remove the unnecessary cast of irq_get_handler_data in the cascade handler, which is the demux flow handler of the parent msi interrupt. (This is the expected usage for handler_data). Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
The msi platform device driver was abusing dev.platform_data for its platform_driver_data. Use the correct pointer for storage. Platform_data is supposed to be for platforms to communicate to drivers parameters that are not otherwise discoverable. Its lifetime matches the platform_device not the platform device driver. It is generally not needed for drivers that only support systems with device trees. Signed-off-by: NMilton Miller <miltonm@bga.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
It was never called because the host is always IRQ_HOST_MAP_LEGACY. And what it purported to do was mask the interrupt (which will already have happend if we shutdown the interrupt), then synchronise_irq and clear the chip pointer, both of which will have been be done by the caller were we to call unmap on a legacy irq. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
These all just clear chip or chipdata fields, which will be done by the generic code when we call irq_free_descs. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
If for some reason the code incrorectly calls the wrong function to manage the revmap, not only should we warn, we should take action. However, in the paths we expect to be taken every delivered interrupt change to WARN_ON_ONCE. Use the if (WARN_ON(x)) format to get the unlikely for free. Signed-off-by: NMilton Miller <miltonm@bga.com> Reviewed-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Since the generic irq code uses a radix tree for sparse interrupts, the initcall ordering has been changed to initialize radix trees before irqs. We no longer need to defer creating revmap radix trees to the arch_initcall irq_late_init. Also, the kmem caches are allocated so we don't need to use zalloc_maybe_bootmem. Signed-off-by: NMilton Miller <miltonm@bga.com> Reviewed-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Since we already have a special case in map to set the ipi handler, use the desired flow. If we don't find an ics to handle the interrupt complain instead of returning 0 without having set a chip or handler. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Since there are only 4 messages, we can replace the atomic bit set (which uses atomic load reserve and store conditional sequence) with a byte stores to seperate bytes. We still have to perform a load reserve and store conditional sequence to avoid loosing messages on reception but we can do that with a single call to xchg. The do {} while and __BIG_ENDIAN specific mask testing was chosen by looking at the generated asm code. On gcc-4.4, the bit masking becomes a simple bit mask and test of the register returned from xchg without storing and loading the value to the stack like attempts with a union of bytes and an int (or worse, loading single bit constants from the constant pool into non-voliatle registers that had to be preseved on the stack). The do {} while avoids an unconditional branch to the end of the loop to test the entry / repeat condition of a while loop and instead optimises for the expected single iteration of the loop. We have a full mb() at the beginning to cover ordering between send, ipi, and receive so we can use xchg_local and forgo the further acquire and release barriers of xchg. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Compile the new smp ipi mux and demux code only if a platform will make use of it. The new config is selected as required. The new cause_ipi smp op is only available conditionally to point out configs where the select is required; this makes setting the op an immediate fail instead of a deferred unresolved symbol at link. This also creates a new config for power surge powermac upgrade support that can be disabled in expert mode but is default on. I also removed the depends / default y on CONFIG_XICS since it is selected by PSERIES. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Consolidate the mux and demux of ipi messages into smp.c and call a new smp_ops callback to actually trigger the ipi. The powerpc architecture code is optimised for having 4 distinct ipi triggers, which are mapped to 4 distinct messages (ipi many, ipi single, scheduler ipi, and enter debugger). However, several interrupt controllers only provide a single software triggered interrupt that can be delivered to each cpu. To resolve this limitation, each smp_ops implementation created a per-cpu variable that is manipulated with atomic bitops. Since these lines will be contended they are optimialy marked as shared_aligned and take a full cache line for each cpu. Distro kernels may have 2 or 3 of these in their config, each taking per-cpu space even though at most one will be in use. This consolidation removes smp_message_recv and replaces the single call actions cases with direct calls from the common message recognition loop. The complicated debugger ipi case with its muxed crash handling code is moved to debug_ipi_action which is now called from the demux code (instead of the multi-message action calling smp_message_recv). I put a call to reschedule_action to increase the likelyhood of correctly merging the anticipated scheduler_ipi() hook coming from the scheduler tree; that single required call can be inlined later. The actual message decode is a copy of the old pseries xics code with its memory barriers and cache line spacing, augmented with a per-cpu unsigned long based on the book-e doorbell code. The optional data is set via a callback from the implementation and is passed to the new cause-ipi hook along with the logical cpu number. While currently only the doorbell implemntation uses this data it should be almost zero cost to retrieve and pass it -- it adds a single register load for the argument from the same cache line to which we just completed a store and the register is dead on return from the call. I extended the data element from unsigned int to unsigned long in case some other code wanted to associate a pointer. The doorbell check_self is replaced by a call to smp_muxed_ipi_resend, conditioned on the CPU_DBELL feature. The ifdef guard could be relaxed to CONFIG_SMP but I left it with BOOKE for now. Also, the doorbell interrupt vector for book-e was not calling irq_enter and irq_exit, which throws off cpu accounting and causes code to not realize it is running in interrupt context. Add the missing calls. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
I can't see any reason these functions are needed by machdep.h and they are all hidden by CONFIG_SMP with no UP alternative. Also move the declarations for the fallback timebase ops, which are used to fill in the smp ops. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
I have no idea if the beat hypervisor supports multiple cpus in a partition, but the code has not been touched since these stubs were added in February of 2007 except to move them in April of 2008. These are stubs: start_cpu always returns fail (which is dropped), the message passing and reciving are empty functions, and the top of file comment says "Incomplete". Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Replace all remaining callers of alloc_maybe_bootmem with zalloc_maybe_bootmem. The callsite in pci_dn is followed with a memset to clear the memory, and not zeroing at the other callsites in the celleb fake pci code could lead to following uninitialized memory as pointers or even freeing said pointers on error paths. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Its unused, and of the three declarations, one is duplicated in pmac.h, the second is static and the third is renamed and static. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Now that MSG_ALL and MSG_ALL_BUT_SELF have been eliminated, smp_mpic_mesage_pass no longer needs to lookup the cpumask just to have mpic_send_ipi extract part of it and recode it in a NR_CPUS loop by mpic_physmask. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
Now that smp_ops->smp_message_pass is always called with an (online) cpu number for the target remove the checks for MSG_ALL and MSG_ALL_BUT_SELF. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
The only user of MSG_ALL_BUT_SELF in the whole kernel tree is powerpc, and it only uses it to start the debugger. Both debuggers always call smp_send_debugger_break with MSG_ALL_BUT_SELF, and only mpic can do anything more optimal than a loop over all online cpus, but all message passing implementations have to code for this special delivery target. Convert smp_send_debugger_break to take void and loop calling the smp_ops message_pass function for each of the other cpus in the online cpumask. Use raw_smp_processor_id() because we are either entering the debugger or trying to start kdump and the additional warning it not useful were it to trigger. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
mpic_set_affinity is allocating and freeing a cpumask var even though it was breaking the cpumask abstraction when passing the mask to mpic_physmask. It also didn't have any check for allocatin failure. Break the cpumask abstraction earlier and use simple bitwise and of the bits from the mask with the bits of cpu_online_mask. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-