Use the ib_umem_find_best_pgsz() and rdma_for_each_block() API when
registering an MR instead of coding it in the driver.

ib_umem_find_best_pgsz() is used to find the best suitable page size
which replaces the existing efa_cont_pages() implementation.
rdma_for_each_block() is used to iterate the umem in aligned contiguous
memory blocks.
Reviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Convert all completions to use the new completion routine that
fixes a race between post send and completion where fields from
a SWQE can be read after SWQE has been freed.

This patch also addresses issues reported in
https://marc.info/?l=linux-kernel&m=155656897409107&w=2.

The reserved operation path has no need for any barrier.

The barrier for the other path is addressed by the
smp_load_acquire() barrier.

Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is opencoded send completion logic all over all
the drivers.

We need to convert to this routine to enforce ordering
issues for completions.  This routine fixes an ordering
issue where the read of the SWQE fields necessary for creating
the completion can race with a post send if the post send catches
a send queue at the edge of being full.  Is is possible in that situation
to read SWQE fields that are being written.

This new routine insures that SWQE fields are read prior to advancing
the index that post send uses to determine queue fullness.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The ib_dma_unmap_page() must match the length of the ib_dma_map_page(),
which is based on odp_shift. Otherwise iommu resources under this API
will not be properly freed.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Discovered this was available already.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The "end" variable is declared as unsigned and can't be negative, it
leads to the situation where timeout limit is not honored, so let's
convert logic to ensure that loop is bounded.

drivers/infiniband/hw/hns/hns_roce_hw_v1.c: In function _hns_roce_v1_clear_hem_:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:2471:12: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
 2471 |    if (end < 0) {
      |            ^

Fixes: 669cefb6 ("RDMA/hns: Remove jiffies operation in disable interrupt context")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update ib_umem_release() to behave similarly to kfree() and allow
submitting NULL pointer as safe input to this function.

Fixes: a52c8e24 ("RDMA: Clean destroy CQ in drivers do not return errors")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

During removing the driver, we needs to notify the roce engine to
stop working immediately,and symmetrically recycle the hardware
resources requested during initialization.

The hardware provides a command called function clear that can package
these operations,so that the driver can only focus on releasing
resources that applied from the operating system.
This patch implements the call of this command.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

All callers of destroy WQ are always success and there is no need
to check their return value, so convert destroy_wq to be void.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

hip08 can support up to 32768 wqes in one qp. currently if the wqe num
is larger than 16384, the driver will lead a calltrace as follows.

[21361.393725] Call trace:
[21361.398605]  hns_roce_v2_modify_qp+0xbcc/0x1360 [hns_roce_hw_v2]
[21361.410627]  hns_roce_modify_qp+0x1d8/0x2f8 [hns_roce]
[21361.420906]  _ib_modify_qp+0x70/0x118
[21361.428222]  ib_modify_qp+0x14/0x1c
[21361.435193]  rt_ktest_modify_qp+0xb8/0x650 [rdma_test]
[21361.445472]  exec_modify_qp_cmd+0x110/0x4d8 [rdma_test]
[21361.455924]  rt_ktest_dispatch_cmd_3+0xa94/0x2edc [rdma_test]
[21361.467422]  rt_ktest_dispatch_cmd_2+0x9c/0x108 [rdma_test]
[21361.478570]  rt_ktest_dispatch_cmd+0x138/0x904 [rdma_test]
[21361.489545]  rt_ktest_dev_write+0x328/0x4b0 [rdma_test]
[21361.499998]  __vfs_write+0x38/0x15c
[21361.506966]  vfs_write+0xa8/0x1a0
[21361.513586]  ksys_write+0x50/0xb0
[21361.520206]  sys_write+0xc/0x14
[21361.526479]  el0_svc_naked+0x30/0x34
[21361.533622] Code: 1ac10841 d37d7c22 0b000021 d37df021 (f86268c0)
[21361.545815] ---[ end trace e2a1feb2c3d7f13c ]---

When the wqe num is larger than 16384, hns_roce_table_find will return an
invalid mtt, this will lead an kernel paging requet error if the driver try
to access it. It's the mtt design defect which can't support up to the max
wqe num of hip08.

This patch fixs it by replacing mtt with mtr for wqe.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently, the code for getting umem and kmem buffers exist many files,
this patch adds a group interfaces to simplify the buffers getting flow.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently, the MTT(memory translate table) design required a buffer
space must has the same hopnum, but the hip08 hw can support mixed
hopnum config in a buffer space.

This patch adds the MTR(memory translate region) design for supporting
mixed multihop.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Sort the netlink policy array by netlink attribute name.  This will make
it easier in the future to find the entry you are looking for when you
need to make changes, or to make sure you don't add the same entry
twice.

Fix the whitespace while we are there.
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If FDB flow tables support decap operation, enable it on creation,
This allows to perform decapsulation of tunnelled packets by steering
rules. If FDB flow tables support reformat operation, enable it on
creation as well.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NPetr Vorel <pvorel@suse.cz>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When flow steering is created, then the encap support should
consider the eswitch encap mode. If the eswitch flow table (FDB)
supports encap then it shouldn't be supported on NIC RX flow tables.

Fixes: 4adda112 ('RDMA/mlx5: Enable decap and packet reformat on flow tables')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NPetr Vorel <pvorel@suse.cz>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Take mlx5-next so we can take a dependent two patch series next.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If invalidate_start returns with EAGAIN then the umem_rwsem needs to be
unlocked as no invalidate_end will be called.

Cc: <stable@vger.kernel.org>
Fixes: ca748c39 ("RDMA/umem: Get rid of per_mm->notifier_count")
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update the struct ib_client for all modules exporting cdevs related to the
ibdevice to also implement RDMA_NLDEV_CMD_GET_CHARDEV. All cdevs are now
autoloadable and discoverable by userspace over netlink instead of relying
on sysfs.

uverbs also exposes the DRIVER_ID for drivers that are able to support
driver id binding in rdma-core.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow userspace to issue a netlink query against the ib_device for
something like "uverbs" and get back the char dev name, inode major/minor,
and interface ABI information for "uverbs0".

Since we are now in netlink this can also trigger a module autoload to
make the uverbs device come into existence.

Largely this will let us replace searching and reading inside sysfs to
setup devices, and provides an alternative (using driver_id) to device
name based provider binding for things like rxe.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This enum is exposed over the sysfs file 'node_type' and over netlink via
RDMA_NLDEV_ATTR_DEV_NODE_TYPE, so declare it in the uapi headers.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add API to get the current Eswitch encap mode.
It will be used in downstream patches to check if
flow table can be created with encap support or not.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NPetr Vorel <pvorel@suse.cz>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>

Devlink has UAPI declaration for encap mode, so there is no
need to be loose on the data get/set by drivers.

Update call sites to use enum devlink_eswitch_encap_mode
instead of plain u8.
Suggested-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NPetr Vorel <pvorel@suse.cz>

Previously, EQ joined the chain notifier on creation.
This forced the caller to be ready to handle events before creating
the EQ through eq_create_generic interface.

To help the caller control when the created EQ will be attached to the
IRQ, add enable/disable API.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The patch modifies the IRQ allocation so that all async EQs are
assigned to the same IRQ resulting in more available IRQs for
completion EQs.

The changes are using the support for IRQ sharing and EQ polling budget
that was introduced in previous patches so when the shared interrupt is
triggered, the kernel will serially call the handler of each of the
sharing EQs with a certain budget of EQEs to poll in order to prevent
starvation.
Signed-off-by: NAriel Levkovich <lariel@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

struct mlx5_irq_info is an active object and not just info.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Finalize IRQ separation and expose irq interface.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

IRQ interface should operate within the irq_table context.
It should be independent of any EQ data structure.

The interface that will be exposed:
init/clenup, create/destroy, attach/detach
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

IRQ allocation should be part of the IRQ table life-cycle.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Affinity set/clear is part of the IRQ life-cycle.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Rmap creation/deletion is part of the IRQ life-cycle.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

IRQ table should only exist for mlx5_core_dev for PF and VF only.
EQ table of mediated devices should hold a pointer to the IRQ table
of the parent PCI device.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Instead of requesting IRQ with eq creation, IRQs will be requested
before EQ table creation.
Instead of freeing the IRQs after EQ destroy, free IRQs after eq
table destroy.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Multiple EQs may share the same IRQ in subsequent patches.

Instead of calling the IRQ handler directly, the EQ will register
to an atomic chain notfier.

The Linux built-in shared IRQ is not used because it forces the caller
to disable the IRQ and clear affinity before free_irq() can be called.

This patch is the first step in the separation of IRQ and EQ logic.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Multiple EQs may share the same irq in subsequent patches.
To avoid starvation, a budget is set per EQ's interrupt handler.

Because of this change, it is no longer required to check that
MLX5_NUM_SPARE_EQE eqes were polled (to detect that arm is required).
It is guaranteed that MLX5_NUM_SPARE_EQE > budget, therefore the
handler will arm and exit the handler before all the entries in the
eq are polled.

In the scenario where the handler is out of budget and there are more
EQEs to poll, arming the EQ guarantees that the HW will send another
interrupt and the handler will be called again.
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

For ECPF with eswitch manager privilege, query the host max VF count
by querying the device using query_functions command.

With this enhancement:
1. flow steering entries are created only for valid vports based on
   the max VF count of the PF.
2. Driver only queries cap of valid vport.

Eswitch requires the max VFs when doing initialization, so do sr-iov
init before eswitch init.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Current function only returns host num of VFs, later patch requires
other params such as host maximum num of VFs.

Return the raw output so that caller can extract info as needed.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Unified representors creation in esw_functions_changed context
handler. Emulate the esw_function_changed event for FW/HW that
does not support this event.
Signed-off-by: NVu Pham <vuhuong@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NBodong Wang <bodong@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Firmware FLR happens sequentially, in some cases, like when destroying
a VM that had many VFs, may require waiting much longer than 10 seconds.
Increase the timeout to 2 minutes, and print a wait countdown status
every 20 seconds.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

This driver was first merged over 10 years ago and has not seen major
activity by the authors in the last 7 years. However, in that time it has
been patched 150 times to adapt it to changing kernel APIs.

Further, the hardware has several issues, like not supporting 64 bit DMA,
that make it rather uninteresting for use with modern systems and RDMA.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>