- 17 10月, 2019 3 次提交
-
-
由 Yonglong Liu 提交于
Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear. The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now. This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about. Fixes: 88d6272a ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: NYonglong Liu <liuyonglong@huawei.com> Reviewed-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected. The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon. Fixes: f0308fb0 ("rxrpc: Fix possible NULL pointer access in ICMP handling") Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
This reverts commit b0818f80. Started seeing weird behavior after this patch especially in the IPv6 code path. Haven't root caused it, but since this was applied to net branch, taking a precautionary measure to revert it and look / analyze those failures Revert this now and I'll send a better fix after analysing / fixing the weirdness observed. CC: Eric Dumazet <edumazet@google.com> CC: Wei Wang <weiwan@google.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2019 23 次提交
-
-
由 Valentin Vidic 提交于
Make sure res does not contain random value if the call to sr_read_cmd fails for some reason. Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by: NValentin Vidic <vvidic@valentin-vidic.from.hr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference. Fixes: aa09677c ("net: bcmgenet: add MDIO routines") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NDoug Berger <opendmb@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks (Codethink) 提交于
The tc_flow_parsers is not used outside of the driver, so make it static to avoid the following sparse warning: drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:516:3: warning: symbol 'tc_flow_parsers' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks (Codethink) 提交于
The cpdma_chan_split_pool() function is not used outside of the driver, so make it static to avoid the following sparse warning: drivers/net/ethernet/ti/davinci_cpdma.c:725:5: warning: symbol 'cpdma_chan_split_pool' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Bogendoerfer 提交于
Commit 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs") switched dma allocation over to dma_alloc_attr, but didn't convert the SNI part to request consistent DMA memory. This broke sni_82596 since driver doesn't do dma_cache_sync for performance reasons. Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596. Fixes: 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs") Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
syzbot reported a memory leak: BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64): backtrace: [...] slab_alloc mm/slab.c:3319 [inline] [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483 [...] sctp_bucket_create net/sctp/socket.c:8523 [inline] [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270 [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402 [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497 [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022 [...] sctp_setsockopt net/sctp/socket.c:4641 [inline] [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611 [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147 [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [...] __do_sys_setsockopt net/socket.c:2100 [inline] It was caused by when sending msgs without binding a port, in the path: inet_sendmsg() -> inet_send_prepare() -> inet_autobind() -> .get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is not. Later when binding another port by sctp_setsockopt_bindx(), a new bucket will be created as bp->port is not set. sctp's autobind is supposed to call sctp_autobind() where it does all things including setting bp->port. Since sctp_autobind() is called in sctp_sendmsg() if the sk is not yet bound, it should have skipped the auto bind. THis patch is to avoid calling inet_autobind() in inet_send_prepare() by changing sctp_prot .no_autobind with true, also remove the unused .get_port. Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vinicius Costa Gomes 提交于
When a application sends many packets with the same txtime, they may be transmitted out of order (different from the order in which they were enqueued). This happens because when inserting elements into the tree, when the txtime of two packets are the same, the new packet is inserted at the left side of the tree, causing the reordering. The only effect of this change should be that packets with the same txtime will be transmitted in the order they are enqueued. The application in question (the AVTP GStreamer plugin, still in development) is sending video traffic, in which each video frame have a single presentation time, the problem is that when packetizing, multiple packets end up with the same txtime. The receiving side was rejecting packets because they were being received out of order. Fixes: 25db26a9 ("net/sched: Introduce the ETF Qdisc") Reported-by: NEderson de Souza <ederson.desouza@intel.com> Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tc_ctl_action() has the ability to loop forever if tcf_action_add() returns -EAGAIN. This special case has been done in case a module needed to be loaded, but it turns out that tcf_add_notify() could also return -EAGAIN if the socket sk_rcvbuf limit is hit. We need to separate the two cases, and only loop for the module loading case. While we are at it, add a limit of 10 attempts since unbounded loops are always scary. syzbot repro was something like : socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3 write(3, ..., 38) = 38 setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0 sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...) NMI backtrace for cpu 0 CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline] check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline] watchdog+0x9d0/0xef0 kernel/hung_task.c:289 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline] RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453 Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6 RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046 RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914 RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1 R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003 FS: 00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] _raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159 __wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122 __wake_up+0xe/0x10 kernel/sched/wait.c:142 netlink_unlock_table net/netlink/af_netlink.c:466 [inline] netlink_unlock_table net/netlink/af_netlink.c:463 [inline] netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514 netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534 rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714 tcf_add_notify net/sched/act_api.c:1343 [inline] tcf_action_add+0x243/0x370 net/sched/act_api.c:1362 tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x803/0x920 net/socket.c:2311 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356 __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg net/socket.c:2363 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440939 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nishad Kamdar 提交于
This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for NXP SJA1105 series Ethernet switch support. It uses an expilict block comment for the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: NJoe Perches <joe@perches.com> Signed-off-by: NNishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syzbot found that if __inet_inherit_port() returns an error, we call tcp_done() after inet_csk_prepare_forced_close(), meaning the socket lock is no longer held. We might fix this in a different way in net-next, but for 5.4 it seems safer to relax the lockdep check. Fixes: d983ea6f ("tcp: add rcu protection around tp->fastopen_rsk") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
MarkLee says: ==================== Update MT7629 to support PHYLINK API This patch set has two goals : 1. Fix mt7629 GMII mode issue after apply mediatek PHYLINK support patch. 2. Update mt7629 dts to reflect the latest dt-binding with PHYLINK support. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 MarkLee 提交于
* Removes mediatek,physpeed property from dtsi that is useless in PHYLINK * Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit. * Set gmac1 to gmii mode that connect to a internal gphy Signed-off-by: NMarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 MarkLee 提交于
In the original design, mtk_phy_connect function will set ge_mode=1 if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting will be incorrect for mt7629 GMII mode. This patch add the missing logic back to fix it. Fixes: b8fc9f30 ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: NMarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Davide Caratti says: ==================== net/sched: fix wrong behavior of MPLS push/pop action this series contains two fixes for TC 'act_mpls', that try to address two problems that can be observed configuring simple 'push' / 'pop' operations: - patch 1/2 avoids dropping non-MPLS packets that pass through the MPLS 'pop' action. - patch 2/2 fixes corruption of the L2 header that occurs when 'push' or 'pop' actions are configured in TC egress path. v2: - change commit message in patch 1/2 to better describe that the patch impacts only TC, thanks to Simon Horman - fix missing documentation of 'mac_len' in patch 2/2 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
the following script: # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress protocol ip matchall \ > action mpls push protocol mpls_uc label 0x355aa bos 1 causes corruption of all IP packets transmitted by eth0. On TC egress, we can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push' operation will result in an overwrite of the first 4 octets in the packet L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same error pattern is present also in the MPLS 'pop' operation. Fix this error in act_mpls data plane, computing 'mac_len' as the difference between the network header and the mac header (when not at TC ingress), and use it in MPLS 'push'/'pop' core functions. v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len' in skb_mpls_pop(), reported by kbuild test robot CC: Lorenzo Bianconi <lorenzo@kernel.org> Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC") Reviewed-by: NSimon Horman <simon.horman@netronome.com> Acked-by: NJohn Hurley <john.hurley@netronome.com> Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
the following script: # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress matchall action mpls pop implicitly makes the kernel drop all packets transmitted by eth0, if they don't have a MPLS header. This behavior is uncommon: other encapsulations (like VLAN) just let the packet pass unmodified. Since the result of MPLS 'pop' operation would be the same regardless of the presence / absence of MPLS header(s) in the original packet, we can let skb_mpls_pop() return 0 when dealing with non-MPLS packets. For the OVS use-case, this is acceptable because __ovs_nla_copy_actions() already ensures that MPLS 'pop' operation only occurs with packets having an MPLS Ethernet type (and there are no other callers in current code, so the semantic change should be ok). v2: better documentation of use-cases for skb_mpls_pop(), thanks to Simon Horman Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC") Reviewed-by: NSimon Horman <simon.horman@netronome.com> Acked-by: NJohn Hurley <john.hurley@netronome.com> Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nishad Kamdar 提交于
This patch corrects the SPDX License Identifier style in header files related to Cavium Ethernet drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: NJoe Perches <joe@perches.com> Signed-off-by: NNishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nishad Kamdar 提交于
This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for Microchip KSZ series switch support. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: NJoe Perches <joe@perches.com> Signed-off-by: NNishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
NET_VENDOR_BROADCOM is intended to control a kconfig menu only. It should not have anything to do with code generation. As such, it should not select DIMLIB for all drivers under NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET). Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/ Fixes: 4f75da36 ("linux/dim: Move implementation to .c files") Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Tal Gilboa <talgi@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Use my kernel.org address for all entries in MAINTAINERS. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c5 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NDoug Berger <opendmb@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
While invalidating the dst, we assign backhole_netdev instead of loopback device. However, this device does not have idev pointer and hence no ip6_ptr even if IPv6 is enabled. Possibly this has triggered the syzbot reported crash. The syzbot report does not have reproducer, however, this is the only device that doesn't have matching idev created. Crash instruction is : static inline bool ip6_ignore_linkdown(const struct net_device *dev) { const struct inet6_dev *idev = __in6_dev_get(dev); return !!idev->cnf.ignore_routes_with_linkdown; <= crash } Also ipv6 always assumes presence of idev and never checks for it being NULL (as does the above referenced code). So adding a idev for the blackhole_netdev to avoid this class of crashes in the future. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2019-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Second set of fixes for 5.4. ath10k regression and iwlwifi BAD_COMMAND bug are the ones getting most reports at the moment. ath10k * fix throughput regression on QCA98XX iwlwifi * fix initialization of 3168 devices (the infamous BAD_COMMAND bug) * other smaller fixes rt2x00 * don't include input-polldev.h header * fix hw reset to work during first 5 minutes of system run ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2019 5 次提交
-
-
由 David S. Miller 提交于
Igor Russkikh says: ==================== Aquantia/Marvell AQtion atlantic driver fixes 10/2019 Here is a set of various bugfixes, to be considered for stable as well. V2: double space removed ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Bogdanov 提交于
macvlan and multicast handling is now mixed up. The explicit issue is that macvlan interface gets broken (no traffic) after clearing MULTICAST flag on the real interface. We now do separate logic and consider both ALLMULTI and MULTICAST flags on the device. Fixes: 11ba961c ("net: aquantia: Fix IFF_ALLMULTI flag functionality") Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Bogdanov 提交于
Individual descriptors on LRO TCP session should be checked for CRC errors. It was discovered that HW recalculates L4 checksums on LRO session and does not break it up on bad L4 csum. Thus, driver should aggregate HW LRO L4 statuses from all individual buffers of LRO session and drop packet if one of the buffers has bad L4 checksum. Fixes: f38f1ee8 ("net: aquantia: check rx csum for all packets in LRO session") Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Russkikh 提交于
>From HW specification to correctly reset HW caches (this is a required workaround when stopping the device), register bit should actually be toggled. It was previosly always just set. Due to the way driver stops HW this never actually caused any issues, but it still may, so cleaning this up. Fixes: 7a1bb494 ("net: aquantia: fix potential IOMMU fault after driver unbind") Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Russkikh 提交于
Chip temperature is a two byte word, colocated internally with cable length data. We do all readouts from HW memory by dwords, thus we should clear extra high bytes, otherwise temperature output gets weird as soon as we attach a cable to the NIC. Fixes: 8f894011 ("net: aquantia: add infrastructure to readout chip temperature") Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2019 9 次提交
-
-
由 Miaoqing Pan 提交于
(kvalo: cherry picked from commit 1340cc63 in wireless-drivers-next to wireless-drivers as this a frequently reported regression) Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by: NMiaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 YueHaibing 提交于
In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: NHulk Robot <hulkci@huawei.com> Fixes: 59c84b9f ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cédric Le Goater 提交于
pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode. Fix that by calling the EOI handler of the interrupt chip. Fixes: f23e0643 ("ibmvnic: Clear pending interrupt after device reset") Signed-off-by: NCédric Le Goater <clg@kaod.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexandre Belloni 提交于
__lpc_eth_shutdown is called after __lpc_eth_reset but it is already calling __lpc_eth_reset. Avoid resetting the IP twice. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Eric Dumazet says: ==================== tcp: address KCSAN reports in tcp_poll() (part I) This all started with a KCSAN report (included in "tcp: annotate tp->rcv_nxt lockless reads" changelog) tcp_poll() runs in a lockless way. This means that about all accesses of tcp socket fields done in tcp_poll() context need annotations otherwise KCSAN will complain about data-races. While doing this detective work, I found a more serious bug, addressed by the first patch ("tcp: add rcu protection around tp->fastopen_rsk"). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
For the sake of tcp_poll(), there are few places where we fetch sk->sk_wmem_queued while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. sk_wmem_queued_add() helper is added so that we can in the future convert to ADD_ONCE() or equivalent if/when available. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
For the sake of tcp_poll(), there are few places where we fetch sk->sk_sndbuf while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that other transports probably need similar fixes. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
For the sake of tcp_poll(), there are few places where we fetch sk->sk_rcvbuf while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that other transports probably need similar fixes. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
There two places where we fetch tp->urg_seq while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write side use corresponding WRITE_ONCE() to avoid store-tearing. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-