- 03 11月, 2013 1 次提交
-
-
由 Tim Gardner 提交于
The multiplex identifier (MID) in the SMB header is only ever used by the client, in conjunction with PID, to match responses from the server. As such, the endianess of the MID is not important. However, When tracing packet sequences on the wire, protocol analyzers such as wireshark display MID as little endian. It is much more informative for the on-the-wire MID sequences to match debug information emitted by the CIFS driver. Therefore, one should write and read MID in the SMB header assuming it is always little endian. Observed from wireshark during the protocol negotiation and session setup: Multiplex ID: 256 Multiplex ID: 256 Multiplex ID: 512 Multiplex ID: 512 Multiplex ID: 768 Multiplex ID: 768 After this patch on-the-wire MID values begin at 1 and increase monotonically. Introduce get_next_mid64() for the internal consumers that use the full 64 bit multiplex identifier. Introduce the helpers get_mid() and compare_mid() to make the endian translation clear. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTim Gardner <timg@tpi.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 28 10月, 2013 11 次提交
-
-
由 Tim Gardner 提交于
The only call site for check_smb_header() assigns 'mid' from the SMB packet, which is then checked again in check_smb_header(). This seems like redundant redundancy. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTim Gardner <timg@tpi.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Steve French 提交于
Currently SMB2 and SMB3 mounts do not query the file system attributes from the server at mount time as is done for cifs. These can be useful for debugging. Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Steve French 提交于
Allow cifs/smb2/smb3 to return whether or not a file is compressed via lsattr, and allow SMB2/SMB3 to set the per-file compression flag ("chattr +c filename" on an smb3 mount). Windows users often set the compressed flag (it can be done from the desktop and file manager). David Disseldorp has patches to Samba server to support this (at least on btrfs) which are complementary to this Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Steve French 提交于
We were off by one calculating the length of ioctls in some cases because the protocol specification for SMB2 ioctl includes a mininum one byte payload but not all SMB2 ioctl requests actually have a data buffer to send. We were also not zeroing out the return buffer (in case of error this is helpful). Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fix from Helge Deller: "This is a 2-line patch to save the CPU register which holds our task thread info pointer before calling a firmware function and then to restore it again afterwards. This is necessary because on some 64bit machines the high-order 32bits are being clobbered by the firmware call, and thus we failed to bring up secondary CPUs (and instead crashed the kernel) in some situations eg if we had more than 4GB RAM. This patch fixes a bug which has been since ever in the parisc linux kernel and which prevented some people to use a 64bit kernel" * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Ingo Molnar: "This tree contains a clockevents regression fix for certain ARM subarchitectures" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents: Sanitize ticks to nsec conversion
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "The tree contains three fixes: - Two tooling fixes - Reversal of the new 'MMAP2' extended mmap record ABI, introduced in this merge window. (Patches were proposed to fix it but it was all a bit late and we felt it's safer to just delay the ABI one more kernel release and do it right)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Disable PERF_RECORD_MMAP2 support perf scripting perl: Fix build error on Fedora 12 perf probe: Fix to initialize fname always before use it
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fix from Ingo Molnar: "This tree fixes a boot crash in CONFIG_DEBUG_MUTEXES=y kernels, on kernels built with GCC 3.x (there are still such distros)" Side note: it's not just a fix for old gcc versions, it's also removing an incredibly broken/subtle check that LLVM had issues with, and that made no sense. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Avoid gcc version dependent __builtin_constant_p() usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target pending fixes for v3.12-rc7. This includes a number of EXTENDED_COPY related fixes as a result of Thomas and Doug's continuing testing and feedback. Also included is an important vhost/scsi fix that addresses a long standing issue where the 'write' parameter for get_user_pages_fast() was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not for virtio-scsi READs -> DMA_FROM_DEVICE. This resulted in random userspace segfaults and other unpleasantness on KVM host, and unfortunately has been an issue since the initial merge of vhost/scsi in v3.6. This patch is CC'ed to stable, along with two other less critical items" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter target/pscsi: fix return value check target: Fail XCOPY for non matching source + destination block_size target: Generate failure for XCOPY I/O with non-zero scsi_status target: Add missing XCOPY I/O operation sense_buffer iser-target: check device before dereferencing its variable target: Return an error for WRITE SAME with ANCHOR==1 target: Fix assignment of LUN in tracepoints target: Reject EXTENDED_COPY when emulate_3pc is disabled target: Allow non zero ListID in EXTENDED_COPY parameter list target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Here is the late fixes pull request for dmaengine while you fly back from KS. We have a new dmaengine ML hosted by vger so a patch for that along with addition of Dave as driver mainatainer for ioat. Other fixes are memeory leak fixes on edma driver, small fixes on rcar-hpbdma driver by Sergei" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: edma: fix another memory leak dma: edma: Fix memory leak MAINTAINERS: add to ioatdma maintainer list MAINTAINERS: add the new dmaengine mailing list
-
- 27 10月, 2013 1 次提交
-
-
由 Helge Deller 提交于
Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were not able to bring up other CPUs than the monarch CPU and instead crashed the kernel. The reason was unclear, esp. since it involved various machines (e.g. J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened when less than 4GB were installed, or if a 32bit Linux kernel was booted. In the end, the fix for those SMP problems is trivial: During the early phase of the initialization of the CPUs, including the monarch CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called. It's documented that this firmware function may clobber various registers, and one one of those possibly clobbered registers is %cr30 which holds the task thread info pointer. Now, if %cr30 would always have been clobbered, then this bug would have been detected much earlier. But lots of testing finally showed, that - at least for %cr30 - on some machines only the upper 32bits of the 64bit register suddenly turned zero after the firmware call. So, after finding the root cause, the explanation for the various crashes became clear: - On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this problem. - Monarch CPUs in 64bit mode always booted sucessfully, because the inital task thread info pointer was below 4GB. - Secondary CPUs booted sucessfully on machines with less than 4GB RAM because the upper 32bit were zero anyay. - Secondary CPus failed to boot if we had more than 4GB RAM and the task thread info pointer was located above the 4GB boundary. Finally, the patch to fix this problem is trivial by saving the %cr30 register before the firmware call and restoring it afterwards. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # 2.6.12+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
- 26 10月, 2013 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from "These fix two bugs in the intel_pstate driver, a hibernate bug leading to nasty resume failures sometimes and acpi-cpufreq initialization bug that causes problems to happen during module unload when intel_pstate is in use. Specifics: - Fix for rounding errors in intel_pstate causing CPU utilization to be underestimated from Brennan Shacklett. - intel_pstate fix to always use the correct max pstate value when computing the min pstate from Dirk Brandewie. - Hibernation fix for deadlocking resume in cases when the probing of the device containing the image is deferred from Russ Dill. - acpi-cpufreq fix to prevent the module from staying in memory when the driver cannot be registered and then attempting to unregister things that have never been registered on exit" * tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: acpi-cpufreq: Fail initialization if driver cannot be registered PM / hibernate: Move software_resume to late_initcall_sync intel_pstate: Correct calculation of min pstate value intel_pstate: Improve accuracy by not truncating until final result
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull final mtd fixes from Brian Norris: "A few more last-minute regression fixes, prepared jointly by me and David Woodhouse: - Revert pxa3xx to its old name to avoid breaking existing 'mtdparts=' boot strings. - Return GPMI NAND to its legacy ECC layout for backwards compatibility. We will revisit this in 3.13. A note from David on the latter fix: 'This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care.'" * tag 'for-linus-20131025' of git://git.infradead.org/linux-mtd: mtd: gpmi: fix ECC regression mtd: nand: pxa3xx: Fix registered MTD name
-
由 Nicholas Bellinger 提交于
This patch addresses a long-standing bug where the get_user_pages_fast() write parameter used for setting the underlying page table entry permission bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl(). However, this parameter is intended to signal WRITEs to pinned userspace PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not* for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case. This bug would manifest itself as random process segmentation faults on KVM host after repeated vhost starts + stops and/or with lots of vhost endpoints + LUNs. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Asias He <asias@redhat.com> Cc: <stable@vger.kernel.org> # 3.6+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Wei Yongjun 提交于
In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes (try two) from Al Viro: "nfsd performance regression fix + seq_file lseek(2) fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: always update file->f_pos in seq_lseek() nfsd regression since delayed fput()
-
由 David Woodhouse 提交于
The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by computing the ECC strength and ECC step size ourselves. Commit 2febcdf8 ("mtd: gpmi: set the BCHs geometry with the ecc info") makes the driver use the ECC info (ECC strength and ECC step size) provided by the MTD code, and creates a different NAND ECC layout for the BCH, and use the new ECC layout. This causes a regression: We can not mount the ubifs which was created by the old NAND ECC layout. This patch fixes this issue by reverting to the legacy ECC layout. We will probably introduce a new device-tree property to indicate that the new ECC layout can be used. For now though, for the imminent 3.12 release, we just unconditionally revert to the 3.11 behaviour. This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Acked-by: NHuang Shijie <b32955@freescale.com> Acked-by: NMarek Vasut <marex@denx.de> Tested-by: NMarek Vasut <marex@denx.de>
-
- 25 10月, 2013 9 次提交
-
-
由 Gu Zheng 提交于
This issue was first pointed out by Jiaxing Wang several months ago, but no further comments: https://lkml.org/lkml/2013/6/29/41 As we know pread() does not change f_pos, so after pread(), file->f_pos and m->read_pos become different. And seq_lseek() does not update file->f_pos if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to m->read_pos), then a subsequent read may read from a wrong position, the following program produces the problem: char str1[32] = { 0 }; char str2[32] = { 0 }; int poffset = 10; int count = 20; /*open any seq file*/ int fd = open("/proc/modules", O_RDONLY); pread(fd, str1, count, poffset); printf("pread:%s\n", str1); /*seek to where m->read_pos is*/ lseek(fd, poffset+count, SEEK_SET); /*supposed to read from poffset+count, but this read from position 0*/ read(fd, str2, count); printf("read:%s\n", str2); out put: pread: ck_netbios_ns 12665 read: nf_conntrack_netbios /proc/modules: nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000 So we always update file->f_pos to offset in seq_lseek() to fix this issue. Signed-off-by: NJiaxing Wang <hello.wjx@gmail.com> Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Rafael J. Wysocki 提交于
Make acpi_cpufreq_init() return error codes when the driver cannot be registered so that the module doesn't stay useless in memory and so that acpi_cpufreq_exit() doesn't attempt to unregister things that have never been registered when the module is unloaded. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "There's really only one bugfix in this branch, which is a fix for timers on the integrator platform. Since Linus Walleij is resurrecting support for the platform it seems valuable to get the fix into 3.12 even though the regression has been around a while. The rest are a handful of maintainers updates. If you prefer to hold those until 3.13 then just merge the first patch on the branch which is the fix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add maintainers entry for Rockchip SoCs MAINTAINERS: Tegra updates, and driver ownership MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth ARM: integrator: deactivate timer0 on the Integrator/CP
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: "Two important fixes - Fix long standing memory leak in the (rarely used) public key support - Fix large file corruption on 32 bit architectures" * tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: fix 32 bit corruption issue ecryptfs: Fix memory leakage in keystore.c
-
由 Russ Dill 提交于
software_resume is being called after deferred_probe_initcall in drivers base. If the probing of the device that contains the resume image is deferred, and the system has been instructed to wait for it to show up, this wait will occur in software_resume. This causes a deadlock. Move software_resume into late_initcall_sync so that it happens after all the other late_initcalls. Signed-off-by: NRuss Dill <Russ.Dill@ti.com> Acked-by: NPavel Machek <Pavel@ucw.cz> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Ezequiel Garcia 提交于
In a recent commit: commit f455578d Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Mon Aug 12 14:14:53 2013 -0300 mtd: nand: pxa3xx: Remove hardcoded mtd name There's no advantage in using a hardcoded name for the mtd device. Instead use the provided by the platform_device. The MTD name was changed to use the one provided by the platform_device. However, this can be problematic as some users want to set partitions using the kernel parameter 'mtdparts', where the name is needed. Therefore, to avoid regressions in users relying in 'mtdparts' we revert the change and use the previous one 'pxa3xx_nand-0'. While at it, let's put a big comment and prevent this change from happening ever again. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Colin Ian King 提交于
Shifting page->index on 32 bit systems was overflowing, causing data corruption of > 4GB files. Fix this by casting it first. https://launchpad.net/bugs/1243636Signed-off-by: NColin Ian King <colin.king@canonical.com> Reported-by: NLars Duesing <lars.duesing@camelotsweb.de> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
-
由 Vinod Koul 提交于
commit 4b6271a6 fix a menory leak but one more existed in driver so fix that Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Valentin Ilie 提交于
When it fails to allocate a slot, edesc should be free'd before return; Signed-off-by: NValentin Ilie <valentin.ilie@gmail.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
- 24 10月, 2013 12 次提交
-
-
由 Nicholas Bellinger 提交于
This patch adds an explicit check + failure for XCOPY I/O to source + destination devices with a non-matching block_size. This limitiation is currently due to the fact that the scatterlist memory allocated for the XCOPY READ operation is passed zero-copy to the XCOPY WRITE operation. Reported-by: NThomas Glanzmann <thomas@glanzmann.de> Reported-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch adds the missing non-zero se_cmd->scsi_status check required for local XCOPY I/O within target_xcopy_issue_pt_cmd() to signal an exception case failure. This will trigger the generation of SAM_STAT_CHECK_CONDITION status from within target_xcopy_do_work() process context code. Reported-by: NThomas Glanzmann <thomas@glanzmann.de> Reported-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch adds the missing xcopy_pt_cmd->sense_buffer[] required for correctly handling CHECK_CONDITION exceptions within the locally generated XCOPY I/O path. Also update target_xcopy_read_source() + target_xcopy_setup_pt_cmd() to pass this buffer into transport_init_se_cmd() to correctly setup se_cmd->sense_buffer. Reported-by: NThomas Glanzmann <thomas@glanzmann.de> Reported-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md bugfixes from Neil Brown: "Assorted md bug-fixes for 3.12. All tagged for -stable releases too" * tag 'md/3.12-fixes' of git://neil.brown.name/md: raid5: avoid finding "discard" stripe raid5: set bio bi_vcnt 0 for discard request md: avoid deadlock when md_set_badblocks. md: Fix skipping recovery for read-only arrays.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and one fix which may cause a hang because of request miscounting (sd)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] sd: call blk_pm_runtime_init before add_disk [SCSI] qla2xxx: Fix request queue null dereference. [SCSI] BusLogic: Fix an oops when intializing multimaster adapter
-
由 Vu Pham 提交于
This patch changes isert_connect_release() to correctly check for the existence struct isert_device *device before checking for isert_device->use_frwr. Signed-off-by: NVu Pham <vu@mellanox.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Shaohua Li 提交于
SCSI discard will damage discard stripe bio setting, eg, some fields are changed. If the stripe is reused very soon, we have wrong bios setting. We remove discard stripe from hash list, so next time the strip will be fully initialized. Suitable for backport to 3.7+. Cc: <stable@vger.kernel.org> (3.7+) Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Shaohua Li 提交于
SCSI layer will add new payload for discard request. If two bios are merged to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse SCSI and cause oops. Suitable for backport to 3.7+ Cc: stable@vger.kernel.org (v3.7+) Reported-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NNeilBrown <neilb@suse.de> Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bian Yu 提交于
When operate harddisk and hit errors, md_set_badblocks is called after scsi_restart_operations which already disabled the irq. but md_set_badblocks will call write_sequnlock_irq and enable irq. so softirq can preempt the current thread and that may cause a deadlock. I think this situation should use write_sequnlock_irqsave/irqrestore instead. I met the situation and the call trace is below: [ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010 [ 638.921923] lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0 [ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37 [ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013 [ 638.927816] ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007 [ 638.929829] ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8 [ 638.931848] ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8 [ 638.933884] Call Trace: [ 638.935867] <IRQ> [<ffffffff8172ff85>] dump_stack+0x55/0x76 [ 638.937878] [<ffffffff81730030>] spin_dump+0x8a/0x8f [ 638.939861] [<ffffffff81730056>] spin_bug+0x21/0x26 [ 638.941836] [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0 [ 638.943801] [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80 [ 638.945747] [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0 [ 638.947672] [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50 [ 638.949595] [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0 [ 638.951504] [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0 [ 638.953388] [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140 [ 638.955248] [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90 [ 638.957116] [<ffffffff8104fddd>] __do_softirq+0xfd/0x330 [ 638.958987] [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.960861] [<ffffffff8174a5cc>] call_softirq+0x1c/0x30 [ 638.962724] [<ffffffff81004c7d>] do_softirq+0x8d/0xc0 [ 638.964565] [<ffffffff8105024e>] irq_exit+0x10e/0x150 [ 638.966390] [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60 [ 638.968223] [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80 [ 638.970079] <EOI> [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.971899] [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50 [ 638.973691] [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50 [ 638.975475] [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0 [ 638.977243] [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80 [ 638.978988] [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456] [ 638.980723] [<ffffffff811b5a1d>] bio_endio+0x1d/0x40 [ 638.982463] [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0 [ 638.984214] [<ffffffff81306b9f>] blk_update_request+0x7f/0x350 [ 638.985967] [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90 [ 638.987710] [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50 [ 638.989439] [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30 [ 638.991149] [<ffffffff81308746>] blk_peek_request+0x106/0x250 [ 638.992861] [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130 [ 638.994561] [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0 [ 638.996251] [<ffffffff813040a7>] __blk_run_queue+0x37/0x50 [ 638.997900] [<ffffffff813045af>] blk_run_queue+0x2f/0x50 [ 638.999553] [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0 [ 639.001185] [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40 [ 639.002798] [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200 [ 639.004391] [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0 [ 639.005996] [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0 [ 639.007600] [<ffffffff81072f6b>] kthread+0xdb/0xe0 [ 639.009205] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 [ 639.010821] [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0 [ 639.012437] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 This bug was introduce in commit 2e8ac303 (the first time rdev_set_badblock was call from interrupt context), so this patch is appropriate for 3.5 and subsequent kernels. Cc: <stable@vger.kernel.org> (3.5+) Signed-off-by: NBian Yu <bianyu@kedacom.com> Reviewed-by: NJianpeng Ma <majianpeng@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Lukasz Dorau 提交于
Since: commit 7ceb17e8 md: Allow devices to be re-added to a read-only array. spares are activated on a read-only array. In case of raid1 and raid10 personalities it causes that not-in-sync devices are marked in-sync without checking if recovery has been finished. If a read-only array is degraded and one of its devices is not in-sync (because the array has been only partially recovered) recovery will be skipped. This patch adds checking if recovery has been finished before marking a device in-sync for raid1 and raid10 personalities. In case of raid5 personality such condition is already present (at raid5.c:6029). Bug was introduced in 3.10 and causes data corruption. Cc: stable@vger.kernel.org Signed-off-by: NPawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: NLukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Dave Jiang 提交于
Signed-off-by: NDave Jiang <dave.jiang@intel.com> [djbw: add dmaengine list] Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Vinod Koul 提交于
We have a new mailing list hosted by vger for dmaengine Acked-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-