Impact: cleanup

set default value early - this allows the removal of a number
of dynamic initialization codepaths, and an #ifdef.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

So we remove some #ifdefs.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Unstatic ioapic_write_entry and setup_ioapic_entry functions so that
the Xen code can do its own ioapic routing setup.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Impact: find right nr_irqs_gsi on some systems.

One test-system has gap between gsi's:

[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[    0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[    0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[    0.000000] nr_irqs_gsi: 38

So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.

need to get that with acpi_probe_gsi when acpi io_apic is used
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: find right nr_irqs_gsi on some systems.

One test-system has gap between gsi's:

[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[    0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[    0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[    0.000000] nr_irqs_gsi: 38

So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.

need to get that with acpi_probe_gsi when acpi io_apic is used
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: make check-timer more robust potentially solve boot fragility

For edge trigger io-apic routing, we already unmasked the pin via
setup_IO_APIC_irq(), so don't unmask it again.

Also call local_irq_disable() between timer_irq_works(), because it
calls local_irq_enable() inside.

Also remove not needed apic version reading for 64-bit
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

also could kill platform_legacy_irq
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: make nr_irqs depend more on cards used in a system

depend on nr_irq_gsi more, and have a ratio for MSI.

v2: make nr_irqs less than NR_VECTORS * nr_cpu_ids
    aka if only one cpu, we only can support nr_irqs = NR_VECTORS
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

disable_ioapic_setup() in init/main.c is ugly as the function is
x86-specific. The #ifdef inline prototype there is ugly too.

Replace it with a generic arch_disable_smp_support() function - which
has a weak alias for non-x86 architectures and for non-ioapic x86 builds.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Eric Paris reported:

> I have an hp dl785g5 which is unable to successfully run
> 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126.  During bootup
> (early in userspace daemons starting) I get the below BUG, which quickly
> renders the machine dead.  I assume it is because sparse_irq_lock never
> gets released when the BUG kills that task.

Adjust lock sequence when migrating a descriptor with
CONFIG_NUMA_MIGRATE_IRQ_DESC enabled.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the 32-bit subarchitecture support code.

All subarchitectures but Voyager have been converted. Voyager will be
done later or will be removed.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move mach_ipi.h definitions into genapic.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Spread mach_apic.h definitions into genapic.h. (with some knock-on effects
on smp.h and apic.h.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move its definitions into apic.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Our send_IPI_*() methods and definitions are a twisted mess: the same
symbol is defined to different things depending on .config details,
in a non-transparent way.

 - spread out the quirks into separately named per apic driver methods

 - prefix the standard PC methods with default_

 - get rid of wrapper macro obfuscation

 - clean up various details
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - clean up the functions

 - get rid of macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

only NUMAQ uses this quirk: to prevent the timer IRQ from being added
on secondary nodes.

All other genapic templates can have a NULL ->multi_timer_check()
callback.

Also, extend the generic code to treat a NULL pointer accordingly.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - move the default vector-allocation-domain to mach-generic

 - fix whitespace damage
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up these methods - to make it clearer which function is
used in which case.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This field name was unreasonably long - shorten it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in
a rather nasty way by re-defining it to zero. That is infinitely
fragile and makes it very hard to see what to code really does in
a given context. The very same constant has different meanings and
values - depending on which subarch is enabled.

Untangle this mess by never undefining the constant, but instead
propagating the right values into the genapic driver templates.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

use apic->target_cpus() directly instead of the TARGET_CPUS wrapper.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE.

The typical 32-bit and the 64-bit build all dereference via the genapic,
so it's pointless to hide that indirection via these ugly macros.

Furthermore, it also obscures subarchitecture details.

So replace it with apic->irq_dest_mode / etc. accesses.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...

The standard naming for such attributes is 'irq' - so rename the following
fields and macros:

 int_delivery_mode => irq_delivery_mode
 INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
 int_dest_mode     => irq_dest_mode
 INT_DEST_MODE     => IRQ_DEST_MODE
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rename genapic-> to apic-> references because in a future chagne we'll
open-code all the indirect calls (instead of obscuring them via macros),
so we want this reference to be as short as possible.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make X86 SGI Ultraviolet support configurable. Saves about 13K of text size
on my modest config.

   text    data     bss     dec     hex filename
6770537 1158680  694356 8623573  8395d5 vmlinux
6757492 1157664  694228 8609384  835e68 vmlinux.nouv
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since commit 75c46fa6, "x64, x2apic/intr-remap: MSI and MSI-X
support for interrupt remapping infrastructure", x86 has had an
implementation of arch_setup_msi_irqs().

That implementation does not call arch_setup_msi_irq(), instead it calls
setup_irq(). No other x86 code calls arch_setup_msi_irq().

That leaves only arch_setup_msi_irqs() in drivers/pci/msi.c, but that
routine is overridden by the x86 version of arch_setup_msi_irqs().

So arch_setup_msi_irq() is dead code, remove it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: widen the effect of the 'nolapic' boot parameter

"nolapic" should not only suppress SMP and use of the LAPIC, but it
also ought to have the effect of disabling all IO-APIC related activity
as well as PCI MSI and HT-IRQs.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, solve 80 columns wrap problems
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, solve 80 columns wrap problems
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: save RAM with large NR_CPUS, get smaller nr_irqs
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: preparation, cleanup, add KERN_INFO printk

Modify references from NR_IRQS to nr_irqs as the later will become
variable-sized based on nr_cpu_ids when CONFIG_SPARSE_IRQS=y.
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: reduce memory usage, use new cpumask API.

Replace the affinity and pending_masks with cpumask_var_t's.  This adds
to the significant size reduction done with the SPARSE_IRQS changes.

The added functions (init_alloc_desc_masks & init_copy_desc_masks) are
in the include file so they can be inlined (and optimized out for the
!CONFIG_CPUMASKS_OFFSTACK case.)  [Naming chosen to be consistent with
the other init*irq functions, as well as the backwards arg declaration
of "from, to" instead of the more common "to, from" standard.]

Includes a slight change to the declaration of struct irq_desc to embed
the pending_mask within ifdef(CONFIG_SMP) to be consistent with other
references, and some small changes to Xen.

Tested: sparse/non-sparse/cpumask_offstack/non-cpumask_offstack/nonuma/nosmp on x86_64
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: virtualization@lists.osdl.org
Cc: xen-devel@lists.xensource.com
Cc: Yinghai Lu <yhlu.kernel@gmail.com>

Impact: cleanup
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Reduce inter-node memory traffic.

Reduces inter-node memory traffic (offloading the global system bus)
by allocating referenced struct cpumasks on the same node as the
referring struct.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: reduce printk noise

The message "alloc irq_2_pin on cpu 0 node 0" is printed way too often.

% dmesg|grep irq_2_pin|wc -l
20

Get rid of the debug printks.
Signed-off-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, reduce kernel size a bit, avoid sparse warning

Fixes sparse warning:

  arch/x86/kernel/io_apic.c:709:6: warning: symbol 'io_apic_sync' was not declared. Should it be static?
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>