Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 19 2月, 2008 2 次提交
    • S
      x86: fix section mismatch in head_64.S:initial_code · da5968ae
      由 Sam Ravnborg 提交于 
      initial_code are initially used to hold a function pointer
from __init and later from __cpuinit. This confuses modpost
and changing initial_code to REFDATA silence the warning.
(But now we do not discard the variable anymore).
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      da5968ae
    • T
      x86: zap invalid and unused pmds in early boot · 31eedd82
      由 Thomas Gleixner 提交于 
      The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting
from __START_KERNEL_map. The kernel itself only needs _text to _end
mapped in the high alias. On relocatible kernels the ASM setup code
adjusts the compile time created high mappings to the relocation. This
creates invalid pmd entries for negative offsets:

0xffffffff80000000 -> pmd entry: ffffffffff2001e3
It points outside of the physical address space and is marked present.

This starts at the virtual address __START_KERNEL_map and goes up to
the point where the first valid physical address (0x0) is mapped.

Zap the mappings before _text and after _end right away in early
boot. This removes also the invalid entries.

Furthermore it simplifies the range check for high aliases.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      31eedd82
  3. 07 2月, 2008 1 次提交
  5. 04 2月, 2008 1 次提交
  7. 30 1月, 2008 3 次提交
  9. 11 10月, 2007 2 次提交
  11. 19 8月, 2007 1 次提交
  13. 30 7月, 2007 1 次提交
  15. 25 7月, 2007 1 次提交
  17. 23 7月, 2007 1 次提交
  19. 17 7月, 2007 1 次提交
  21. 03 5月, 2007 9 次提交
    • A
      [PATCH] x86-64: Remove unused stext symbol · b8716890
      由 Andi Kleen 提交于 
      suggested by Jan Beulich
Signed-off-by: NAndi Kleen <ak@suse.de>
      b8716890
    • J
      [PATCH] x86: tighten kernel image page access rights · 6fb14755
      由 Jan Beulich 提交于 
      On x86-64, kernel memory freed after init can be entirely unmapped instead
of just getting 'poisoned' by overwriting with a debug pattern.

On i386 and x86-64 (under CONFIG_DEBUG_RODATA), kernel text and bug table
can also be write-protected.

Compared to the first version, this one prevents re-creating deleted
mappings in the kernel image range on x86-64, if those got removed
previously. This, together with the original changes, prevents temporarily
having inconsistent mappings when cacheability attributes are being
changed on such pages (e.g. from AGP code). While on i386 such duplicate
mappings don't exist, the same change is done there, too, both for
consistency and because checking pte_present() before using various other
pte_XXX functions is a requirement anyway. At once, i386 code gets
adjusted to use pte_huge() instead of open coding this.

AK: split out cpa() changes
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      6fb14755
    • V
      [PATCH] x86-64: Relocatable Kernel Support · 1ab60e0f
      由 Vivek Goyal 提交于 
      This patch modifies the x86_64 kernel so that it can be loaded and run
at any 2M aligned address, below 512G.  The technique used is to
compile the decompressor with -fPIC and modify it so the decompressor
is fully relocatable.  For the main kernel the page tables are
modified so the kernel remains at the same virtual address.  In
addition a variable phys_base is kept that holds the physical address
the kernel is loaded at.  __pa_symbol is modified to add that when
we take the address of a kernel symbol.

When loaded with a normal bootloader the decompressor will decompress
the kernel to 2M and it will run there.  This both ensures the
relocation code is always working, and makes it easier to use 2M
pages for the kernel and the cpu.

AK: changed to not make RELOCATABLE default in Kconfig
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      1ab60e0f
    • V
      [PATCH] x86-64: Remove the identity mapping as early as possible · cfd243d4
      由 Vivek Goyal 提交于 
      With the rewrite of the SMP trampoline and the early page
allocator there is nothing that needs identity mapped pages,
once we start executing C code.

So add zap_identity_mappings into head64.c and remove
zap_low_mappings() from much later in the code.  The functions
 are subtly different thus the name change.

This also kills boot_level4_pgt which was from an earlier
attempt to move the identity mappings as early as possible,
and is now no longer needed.  Essentially I have replaced
boot_level4_pgt with trampoline_level4_pgt in trampoline.S
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      cfd243d4
    • V
      [PATCH] x86-64: 64bit ACPI wakeup trampoline · d8e1baf1
      由 Vivek Goyal 提交于 
      o Moved wakeup_level4_pgt into the wakeup routine so we can
  run the kernel above 4G.

o Now we first go to 64bit mode and continue to run from trampoline and
  then then start accessing kernel symbols and restore processor context.
  This enables us to resume even in relocatable kernel context when
  kernel might not be loaded at physical addr it has been compiled for.

o Removed the need for modifying any existing kernel page table.

o Increased the size of the wakeup routine to 8K. This is required as
  wake page tables are on trampoline itself and they got to be at 4K
  boundary, hence one page is not sufficient.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      d8e1baf1
    • V
      [PATCH] x86-64: 64bit PIC SMP trampoline · 90b1c208
      由 Vivek Goyal 提交于 
      This modifies the SMP trampoline and all of the associated code so
it can jump to a 64bit kernel loaded at an arbitrary address.

The dependencies on having an idenetity mapped page in the kernel
page tables for SMP bootup have all been removed.

In addition the trampoline has been modified to verify
that long mode is supported.  Asking if long mode is implemented is
down right silly but we have traditionally had some of these checks,
and they can't hurt anything.  So when the totally ludicrous happens
we just might handle it correctly.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      90b1c208
    • V
      [PATCH] x86-64: cleanup segments · 30f47289
      由 Vivek Goyal 提交于 
      Move __KERNEL32_CS up into the unused gdt entry.  __KERNEL32_CS is
used when entering the kernel so putting it first is useful when
trying to keep boot gdt sizes to a minimum.

Set the accessed bit on all gdt entries.  We don't care
so there is no need for the cpu to burn the extra cycles,
and it potentially allows the pages to be immutable.  Plus
it is confusing when debugging and your gdt entries mysteriously
change.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      30f47289
    • V
      [PATCH] x86-64: Clean up the early boot page table · 67dcbb6b
      由 Vivek Goyal 提交于 
      - Merge physmem_pgt and ident_pgt, removing physmem_pgt.  The merge
  is broken as soon as mm/init.c:init_memory_mapping is run.
- As physmem_pgt is gone don't export it in pgtable.h.
- Use defines from pgtable.h for page permissions.
- Fix the physical memory identity mapping so it is at the correct
  address.
- Remove the physical memory mapping from wakeup_level4_pgt it
  is at the wrong address so we can't possibly be usinging it.
- Simply NEXT_PAGE the work to calculate the phys_ alias
  of the labels was very cool.  Unfortuantely it was a brittle
  special purpose hack that makes maitenance more difficult.
  Instead just use label - __START_KERNEL_map like we do
  everywhere else in assembly.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      67dcbb6b
    • V
      [PATCH] x86-64: Kill temp boot pmds · dafe41ee
      由 Vivek Goyal 提交于 
      Early in the boot process we need the ability to set
up temporary mappings, before our normal mechanisms are
initialized.  Currently this is used to map pages that
are part of the page tables we are building and pages
during the dmi scan.

The core problem is that we are using the user portion of
the page tables to implement this.  Which means that while
this mechanism is active we cannot catch NULL pointer dereferences
and we deviate from the normal ways of handling things.

In this patch I modify early_ioremap to map pages into
the kernel portion of address space, roughly where
we will later put modules, and I make the discovery of
which addresses we can use dynamic which removes all
kinds of static limits and remove the dependencies
on implementation details between different parts of the code.

Now alloc_low_page() and unmap_low_page() use
early_iomap() and early_iounmap() to allocate/map and
unmap a page.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      dafe41ee
  23. 13 2月, 2007 1 次提交
    • Z
      [PATCH] x86-64: x86_64 - Fix FS/GS registers for VT execution · ffb60175
      由 Zachary Amsden 提交于 
      Initialize FS and GS to __KERNEL_DS as well.  The actual value of them is not
important, but it is important to reload them in protected mode.  At this time,
they still retain the real mode values from initial boot.  VT disallows
execution of code under such conditions, which means hardware virtualization
can not be used to boot the kernel on Intel platforms, making the boot time
painfully slow.

This requires moving the GS load before the load of GS_BASE, so just move
all the segments loads there to keep them together in the code.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      ffb60175
  25. 26 9月, 2006 3 次提交
    • E
      [PATCH] Reload CS when startup_64 is used. · 26374c7b
      由 Eric W. Biederman 提交于 
      In long mode the %cs is largely a relic.  However there are a few cases
like iret where it matters that we have a valid value.  Without this
patch it is possible to enter the kernel in startup_64 without setting
%cs to a valid value.  With this patch we don't care what %cs value
we enter the kernel with, so long as the cs shadow register indicates
it is a privileged code segment.

Thanks to Magnus Damm for finding this problem and posting the
first workable patch.  I have moved the jump to set %cs down a
few instructions so we don't need to take an extra jump.  Which
keeps the code simpler.
Signed-of-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
      26374c7b
    • A
      [PATCH] Remove obsolete CVS $Id$ from assembler files in arch/x86_64/kernel/* · 44cc4526
      由 Andi Kleen 提交于 
      CVS hasn't been used for a long time for them.
Signed-off-by: NAndi Kleen <ak@suse.de>
      44cc4526
    • V
      [PATCH] Add the vgetcpu vsyscall · c08c8205
      由 Vojtech Pavlik 提交于 
      This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP
capability uses either the RDTSCP or CPUID to obtain a CPU and node
numbers and pass them to the program.

AK: Lots of changes over Vojtech's original code:
Better prototype for vgetcpu()
It's better to pass the cpu / node numbers as separate arguments
to avoid mistakes when going from SMP to NUMA.
Also add a fast time stamp based cache using a user supplied
argument to speed things more up.
Use fast method from Chuck Ebbert to retrieve node/cpu from
GDT limit instead of CPUID
Made sure RDTSCP init is always executed after node is known.
Drop printk
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NAndi Kleen <ak@suse.de>
      c08c8205
  27. 31 8月, 2006 1 次提交
  29. 26 3月, 2006 2 次提交
  31. 18 2月, 2006 1 次提交
  33. 17 1月, 2006 1 次提交
  35. 12 1月, 2006 2 次提交
  37. 15 11月, 2005 1 次提交
  39. 05 10月, 2005 1 次提交
    • A
      [PATCH] x86_64: Drop global bit from early low mappings · 944d2647
      由 Andi Kleen 提交于 
      Drop global bit from early low mappings

Suggested by Linus, originally also proposed by Suresh.

This fixes a race condition with early start of udev, originally
tracked down by Suresh B. Siddha. The problem was that switching
to the user space VM would not clear the global low mappings
for the beginning of memory, which lead to memory corruption.

Drop the global bits.

The kernel mapping stays global because it should stay constant.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      944d2647
  41. 13 9月, 2005 1 次提交
  43. 29 7月, 2005 1 次提交
  45. 26 6月, 2005 1 次提交
    • E
      [PATCH] kexec: x86_64: add CONFIG_PHYSICAL_START · d0537508
      由 Eric W. Biederman 提交于 
      For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86_64 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      d0537508
  47. 17 4月, 2005 1 次提交