Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

First of all, get_sb_nodev() grabs anon dev minor and we
never free it in ecryptfs ->kill_sb().  Moreover, on one
of the failure exits in ecryptfs_get_sb() we leak things -
it happens before we set ->s_root and ->put_super() won't
be called in that case.  Solution: kill ->put_super(), do
all that stuff in ->kill_sb().  And use kill_anon_sb() instead
of generic_shutdown_super() to deal with anon dev leak.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

postpone simple_set_mnt() until we know we won't fail.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We set the "it's dead, don't mount on it" flag _and_ do not remove it if
we turn the damn thing negative and leave it around.  And if it goes
positive afterwards, well...

Fortunately, there's only one place where that needs to be caught:
only d_delete() can turn the sucker negative without immediately freeing
it; all other places that can lead to ->d_iput() call are followed by
unconditionally freeing struct dentry in question.  So the fix is obvious:

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16014Reported-by: NAdam Tkac <vonsch@gmail.com>
Tested-by: NAdam Tkac <vonsch@gmail.com>
Cc: <stable@kernel.org>         [2.6.34.x]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: BKL ioctl pushdown

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits)
  powerpc: Remove unused 'protect4gb' boot parameter
  powerpc: Build-in e1000e for pseries & ppc64_defconfig
  powerpc/pseries: Make request_ras_irqs() available to other pseries code
  powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity
  powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim
  powerpc: Use smt_snooze_delay=-1 to always busy loop
  powerpc: Remove check of ibm,smt-snooze-delay OF property
  powerpc/kdump: Fix race in kdump shutdown
  powerpc/kexec: Fix race in kexec shutdown
  powerpc/kexec: Speedup kexec hash PTE tear down
  powerpc/pseries: Add hcall to read 4 ptes at a time in real mode
  powerpc: Use more accurate limit for first segment memory allocations
  powerpc/kdump: Use chip->shutdown to disable IRQs
  powerpc/kdump: CPUs assume the context of the oopsing CPU
  powerpc/crashdump: Do not fail on NULL pointer dereferencing
  powerpc/eeh: Fix oops when probing in early boot
  powerpc/pci: Check devices status property when scanning OF tree
  powerpc/vio: Switch VIO Bus PM to use generic helpers
  powerpc: Avoid bad relocations in iSeries code
  powerpc: Use common cpu_die (fixes SMP+SUSPEND build)
  ...

* 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (207 commits)
  drm/radeon/kms/pm/r600: select the mid clock mode for single head low profile
  drm/radeon: fix power supply kconfig interaction.
  drm/radeon/kms: record object that have been list reserved
  drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.
  drm/radeon/kms: don't default display priority to high on rs4xx
  drm/edid: fix typo in 1600x1200@75 mode
  drm/nouveau: fix i2c-related init table handlers
  drm/nouveau: support init table i2c device identifier 0x81
  drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers
  drm/nouveau: display error message for any failed init table opcode
  drm/nouveau: fix init table handlers to return proper error codes
  drm/nv50: support fractional feedback divider on newer chips
  drm/nv50: fix monitor detection on certain chipsets
  drm/nv50: store full dcb i2c entry from vbios
  drm/nv50: fix suspend/resume with DP outputs
  drm/nv50: output calculated crtc pll when debugging on
  drm/nouveau: dump pll limits entries when debugging is on
  drm/nouveau: bios parser fixes for eDP boards
  drm/nouveau: fix a nouveau_bo dereference after it's been destroyed
  drm/nv40: remove some completed ctxprog TODOs
  ...

Merge branch 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb

* 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  echi-dbgp: Add kernel debugger support for the usb debug port
  earlyprintk,vga,kdb: Fix \b and \r for earlyprintk=vga with kdb
  kgdboc: Add ekgdboc for early use of the kernel debugger
  x86,early dr regs,kgdb: Allow kernel debugger early dr register access
  x86,kgdb: Implement early hardware breakpoint debugging
  x86, kgdb, init: Add early and late debug states
  x86, kgdb: early trap init for early debug

* 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits)
  kdb,debug_core: Allow the debug core to receive a panic notification
  MAINTAINERS: update kgdb, kdb, and debug_core info
  debug_core,kdb: Allow the debug core to process a recursive debug entry
  printk,kdb: capture printk() when in kdb shell
  kgdboc,kdb: Allow kdb to work on a non open console port
  kgdb: Add the ability to schedule a breakpoint via a tasklet
  mips,kgdb: kdb low level trap catch and stack trace
  powerpc,kgdb: Introduce low level trap catching
  x86,kgdb: Add low level debug hook
  kgdb: remove post_primary_code references
  kgdb,docs: Update the kgdb docs to include kdb
  kgdboc,keyboard: Keyboard driver for kdb with kgdb
  kgdb: gdb "monitor" -> kdb passthrough
  sparc,sunzilog: Add console polling support for sunzilog serial driver
  sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
  kgdb,8250,pl011: Return immediately from console poll
  kgdb: core changes to support kdb
  kdb: core for kgdb back end (2 of 2)
  kdb: core for kgdb back end (1 of 2)
  kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (59 commits)
  HID: fix up 'EMBEDDED' mess in Kconfig
  HID: roccat: cleanup preprocessor macros
  HID: roccat: refactor special event handling
  HID: roccat: fix special button support
  HID: roccat: Correctly mark init and exit functions
  HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available
  HID: hid-samsung: remove redundant key mappings
  HID: add omitted hid-zydacron.c file
  HID: hid-samsung: add support for Creative Desktop Wireless 6000
  HID: picolcd: Eliminate use after free
  HID: Zydacron Remote Control driver
  HID: Use kmemdup
  HID: magicmouse: fix input registration
  HID: make Prodikeys driver standalone config option
  HID: Prodikeys PC-MIDI HID Driver
  HID: hidraw: fix indentation
  HID: ntrig: add filtering module parameters
  HID: ntrig: add sysfs access to filter parameters
  HID: ntrig: add sensitivity and responsiveness support
  HID: add multi-input quirk for eGalax Touchcontroller
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (31 commits)
  dquot: Detect partial write error to quota file in write_blk() and add printk_ratelimit for quota error messages
  ocfs2: Fix lock inversion in quotas during umount
  ocfs2: Use __dquot_transfer to avoid lock inversion
  ocfs2: Fix NULL pointer deref when writing local dquot
  ocfs2: Fix estimate of credits needed for quota allocation
  ocfs2: Fix quota locking
  ocfs2: Avoid unnecessary block mapping when refreshing quota info
  ocfs2: Do not map blocks from local quota file on each write
  quota: Refactor dquot_transfer code so that OCFS2 can pass in its references
  quota: unify quota init condition in setattr
  quota: remove sb_has_quota_active in get/set_info
  quota: unify ->set_dqblk
  quota: unify ->get_dqblk
  ext3: make barrier options consistent with ext4
  quota: Make quota stat accounting lockless.
  suppress warning: "quotatypes" defined but not used
  ext3: Fix waiting on transaction during fsync
  jbd: Provide function to check whether transaction will issue data barrier
  ufs: add ufs speciffic ->setattr call
  BKL: Remove BKL from ext2 filesystem
  ...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits)
  omap4: Add support for i2c init
  omap: Fix i2c platform init code for omap4
  OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
  OMAP powerdomain, hwmod, omap_device: add some credits
  OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
  OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate
  OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
  OMAP: timers: Fix clock source names for OMAP4
  OMAP4 clock: Support clk_set_parent
  OMAP4: PRCM: Add offset defines for all CM registers
  OMAP4: PRCM: Add offset defines for all PRM registers
  OMAP4: PRCM: Remove duplicate definition of base addresses
  OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
  OMAP4: CM: Remove non-functional registers in ES1.0
  OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  OMAP: hwmod: Rename hwmod name for the MPU
  OMAP: hwmod: Do not exit the iteration if one clock init failed
  OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
  OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value
  OMAP: hwmod: Fix wrong pointer iteration in oh->slaves
  ...

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-nforce2: Remove redundant error messages on ACPI conflict
  i2c: Use <linux/io.h> instead of <asm/io.h>
  i2c-algo-pca: Fix coding style issues
  i2c-dev: Fix all coding style issues
  i2c-core: Fix some coding style issues
  i2c-gpio: Move initialization code to subsys_initcall()
  i2c-parport: Make template structure const
  i2c-dev: Remove unnecessary casts
  at24: Fall back to byte or word reads if needed
  i2c-stub: Expose the default functionality flags
  i2c/scx200_acb: Make PCI device ids constant
  i2c-i801: Fix all checkpatch warnings
  i2c-i801: All newer devices have all the optional features
  i2c-i801: Let the user disable selected driver features

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (25 commits)
  serial: Tidy REMOTE_DEBUG
  serial: isicomm: handle running out of slots
  serial: bfin_sport_uart: Use resource size to fix off-by-one error
  tty: fix obsolete comment on tty_insert_flip_string_fixed_flag
  serial: Add driver for the Altera UART
  serial: Add driver for the Altera JTAG UART
  serial: timbuart: make sure last byte is sent when port is closed
  serial: two branches the same in timbuart_set_mctrl()
  serial: uartlite: move from byte accesses to word accesses
  tty: n_gsm: depends on NET
  tty: n_gsm line discipline
  serial: TTY: new ldiscs for staging
  serial: bfin_sport_uart: drop redundant cpu depends
  serial: bfin_sport_uart: drop the experimental markings
  serial: bfin_sport_uart: pull in bfin_sport.h for SPORT defines
  serial: bfin_sport_uart: only enable SPORT TX if data is to be sent
  serial: bfin_sport_uart: drop useless status masks
  serial: bfin_sport_uart: zero sport_uart_port if allocated dynamically
  serial: bfin_sport_uart: protect changes to uart_port
  serial: bfin_sport_uart: add support for CTS/RTS via GPIOs
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (38 commits)
  net: Expose all network devices in a namespaces in sysfs
  hotplug: netns aware uevent_helper
  kobj: Send hotplug events in the proper namespace.
  netlink: Implment netlink_broadcast_filtered
  net/sysfs: Fix the bitrot in network device kobject namespace support
  netns: Teach network device kobjects which namespace they are in.
  kobject: Send hotplug events in all network namespaces
  driver-core: fix Typo in drivers/base/core.c for CONFIG_MODULE
  pci: check caps from sysfs file open to read device dependent config space
  sysfs: add struct file* to bin_attr callbacks
  sysfs: Remove usage of S_BIAS to avoid merge conflict with the vfs tree
  sysfs: Don't use enums in inline function declaration.
  sysfs-namespaces: add a high-level Documentation file
  sysfs: Comment sysfs directory tagging logic
  driver core: Implement ns directory support for device classes.
  sysfs: Implement sysfs_delete_link
  sysfs: Add support for tagged directories with untagged members.
  sysfs: Implement sysfs tagged directory support.
  kobj: Add basic infrastructure for dealing with namespaces.
  sysfs: Remove double free sysfs_get_sb
  ...

Fix kernel-doc fatal error:
/** beginning a non-kernel-doc comment block:
(That alone does not kill kernel-doc, but the 'enum' was
totally confusing to it.)

Error(/lnx/src/TMP/linux-2.6.34-git6//include/linux/interrupt.h:88): cannot understand prototype: 'enum '
make[2]: *** [Documentation/DocBook/genericirq.xml] Error 1
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dquot: Detect partial write error to quota file in write_blk() and add printk_ratelimit for quota error messages

This patch changes quota_tree.c:write_blk() to detect error caused by partial
write to quota file and add a macro to limit control printed quota error
messages so we won't fill up dmesg with a corrupted quota file.
Signed-off-by: NJiaying Zhang <jiayingz@google.com>
Signed-off-by: NJan Kara <jack@suse.cz>

We cannot cancel delayed work from ocfs2_local_free_info because that is called
with dqonoff_mutex held and the work it cancels requires dqonoff_mutex to
finish. Cancel the work before acquiring dqonoff_mutex.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

dquot_transfer() acquires own references to dquots via dqget(). Thus it waits
for dq_lock which creates a lock inversion because dq_lock ranks above
transaction start but transaction is already started in ocfs2_setattr(). Fix
the problem by passing own references directly to __dquot_transfer.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

commit_dqblk() can write quota info to global file. That is actually a bad
thing to do because if we are just modifying local quota file, we are not
prepared (do not hold proper locks, do not have transaction credits) to do
a modification of the global quota file. So do not use commit_dqblk() and
instead call our writing function directly.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

We were missing reservation of a journal credit for modification of quota
file inode when creating new dquot structure in the global quota file.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

OCFS2 had three issues with quota locking:
a) When reading dquot from global quota file, we started a transaction while
   holding dqio_mutex which is prone to deadlocks because other paths do it
   the other way around
b) During ocfs2_sync_dquot we were not protected against concurrent writers
   on the same node. Because we first copy data to local buffer, a race
   could happen resulting in old data being written to global quota file and
   thus causing quota inconsistency after a crash.
c) ip_alloc_sem of quota files was acquired while a transaction is started
   in ocfs2_quota_write which can deadlock because we first get ip_alloc_sem
   and then start a transaction when extending quota files.

We fix the problem a) by pulling all necessary code to ocfs2_acquire_dquot
and ocfs2_release_dquot. Thus we no longer depend on generic dquot_acquire
to do the locking and can force proper lock ordering.

Problems b) and c) are fixed by locking i_mutex and ip_alloc_sem of
global quota file in ocfs2_lock_global_qf and removing ip_alloc_sem from
ocfs2_quota_read and ocfs2_quota_write.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

The position of global quota file info does not change. So we do not have
to do logical -> physical block translation every time we reread it from
disk. Thus we can also avoid taking ip_alloc_sem.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

There is no need to map offset of local dquot structure to on disk block
in each quota write. It is enough to map it just once and store the physical
block number in quota structure in memory. Moreover this simplifies locking
as we do not have to take ip_alloc_sem from quota write path.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently, __dquot_transfer() acquires its own references of dquot structures
that will be put into inode. But for OCFS2, this creates a lock inversion
between dq_lock (waited on in dqget) and transaction start (started in
ocfs2_setattr). Currently, deadlock is impossible because dq_lock is acquired
only during dquot_acquire and dquot_release and we already hold a reference to
dquot structures in ocfs2_setattr so neither of these functions can be called
while we call dquot_transfer. But this is rather subtle and it is hard to teach
lockdep about it. So provide __dquot_transfer function that can be passed dquot
references directly. OCFS2 can then pass acquired dquot references directly to
__dquot_transfer with proper locking.
Signed-off-by: NJan Kara <jack@suse.cz>

Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

The methods already do these checks, so remove them in the quotactl
implementation to allow non-VFS quota implementations to also support
these calls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Pass the larger struct fs_disk_quota to the ->set_dqblk operation so
that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->set_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.

Add new fieldmask values for setting the numer of blocks and inodes
values which is required for the VFS quota, but wasn't for XFS.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Pass the larger struct fs_disk_quota to the ->get_dqblk operation so
that the Q_GETQUOTA and Q_XGETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->get_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

ext4 was updated to accept barrier/nobarrier mount options
in addition to the older barrier=0/1.  The barrier story
is complex enough, we should help people by making the options
the same at least, even if the defaults are different.

This patch allows the barrier/nobarrier mount options for ext3,
while keeping nobarrier the default.

It also unconditionally displays barrier status in show_options,
and prints a message at mount time if barriers are not enabled,
just as ext4 does.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Quota stats is mostly writable data structure. Let's alloc percpu
bucket for each value.

NOTE: dqstats_read() function is racy against dqstats_{inc,dec}
and may return inconsistent value. But this is ok since absolute
accuracy is not required.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

Suppress compilation warning: "quotatypes" defined but not used.
quotatypes is used only when CONFIG_QUOTA_DEBUG or CONFIG_PRINT_QUOTA_WARNING
is/are defined.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

log_start_commit() returns 1 only when it started a transaction
commit. Thus in case transaction commit is already running, we
fail to wait for the commit to finish. Fix the issue by always
waiting for the commit regardless of the log_start_commit return
value.
Signed-off-by: NJan Kara <jack@suse.cz>

Provide a function which returns whether a transaction with given tid
will send a barrier to the filesystem device. The function will be used
by ext3 to detect whether fsync needs to send a separate barrier or not.
Signed-off-by: NJan Kara <jack@suse.cz>

generic setattr not longer responsible for quota transfer.
use ufs_setattr for all ufs's inodes.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.

If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJan Kara <jack@suse.cz>