- 10 12月, 2018 6 次提交
-
-
由 Or Gerlitz 提交于
Currently, duplicated rules are rejected only for skip_hw or "none", hence allowing users to push duplicates into HW for no reason. Use the flower tables to protect for that. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NPaul Blakey <paulb@mellanox.com> Reported-by: NChris Mi <chrism@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Bug fixes. The first patch fixes a regression on CoS queue setup, introduced recently by the 57500 new chip support patches. The rest are fixes related to ring and resource accounting on the new 57500 chips. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The CP rings are accounted differently on the new 57500 chips. There must be enough CP rings for the sum of RX and TX rings on the new chips. The current logic may be over-estimating the RX and TX rings. The output parameter max_cp should be the maximum NQs capped by MSIX vectors available for networking in the context of 57500 chips. The existing code which uses CMPL rings capped by the MSIX vectors works most of the time but is not always correct. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The new 57500 chips have introduced the NQ structure in addition to the existing CP rings in all chips. We need to introduce a new bnxt_nq_rings_in_use(). On legacy chips, the 2 functions are the same and one will just call the other. On the new chips, they refer to the 2 separate ring structures. The new function is now called to determine the resource (NQ or CP rings) associated with MSIX that are in use. On 57500 chips, the RDMA driver does not use the CP rings so we don't need to do the subtraction adjustment. Fixes: 41e8d798 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The new 57500 chips use 1 NQ per MSIX vector, whereas legacy chips use 1 CP ring per MSIX vector. To better unify this, add a resv_irqs field to struct bnxt_hw_resc. On legacy chips, we initialize resv_irqs with resv_cp_rings. On new chips, we initialize it with the allocated MSIX resources. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Recent changes to support the 57500 devices have created this regression. The bnxt_hwrm_queue_qportcfg() call was moved to be called earlier before the RDMA support was determined, causing the CoS queues configuration to be set before knowing whether RDMA was supported or not. Fix it by moving it to the right place right after RDMA support is determined. Fixes: 98f04cf0 ("bnxt_en: Check context memory requirements from firmware.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2018 1 次提交
-
-
由 Tarick Bedeir 提交于
rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1. Fixes: 6e8814ce ("net/mlx4_en: Fix mixed PFC and Global pause user control requests") Signed-off-by: NTarick Bedeir <tarick@google.com> Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2018 6 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This reverts commit 624ca9c3. This commit is completely bogus. The STACR register has two formats, old and new, depending on the version of the IP block used. There's a pair of device-tree properties that can be used to specify the format used: has-inverted-stacr-oc has-new-stacr-staopc What this commit did was to change the bit definition used with the old parts to match the new parts. This of course breaks the driver on all the old ones. Instead, the author should have set the appropriate properties in the device-tree for the variant used on his board. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Stefano Brivio says: ==================== Fix slab out-of-bounds on insufficient headroom for IPv6 packets Patch 1/2 fixes a slab out-of-bounds occurring with short SCTP packets over IPv4 over L2TP over IPv6 on a configuration with relatively low HEADER_MAX. Patch 2/2 makes sure we avoid writing before the allocated buffer in neigh_hh_output() in case the headroom is enough for the unaligned hardware header size, but not enough for the aligned one, and that we warn if we hit this condition. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Brivio 提交于
While skb_push() makes the kernel panic if the skb headroom is less than the unaligned hardware header size, it will proceed normally in case we copy more than that because of alignment, and we'll silently corrupt adjacent slabs. In the case fixed by the previous patch, "ipv6: Check available headroom in ip6_xmit() even without options", we end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware header and write 16 bytes, starting 2 bytes before the allocated buffer. Always check we're not writing before skb->head and, if the headroom is not enough, warn and drop the packet. v2: - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet (Eric Dumazet) - if we avoid the panic, though, we need to explicitly check the headroom before the memcpy(), otherwise we'll have corrupted slabs on a running kernel, after we warn - use __skb_push() instead of skb_push(), as the headroom check is already implemented here explicitly (Eric Dumazet) Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Brivio 提交于
Even if we send an IPv6 packet without options, MAX_HEADER might not be enough to account for the additional headroom required by alignment of hardware headers. On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL, sending short SCTP packets over IPv4 over L2TP over IPv6, we start with 100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54 bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2(). Those would be enough to append our 14 bytes header, but we're going to align that to 16 bytes, and write 2 bytes out of the allocated slab in neigh_hh_output(). KASan says: [ 264.967848] ================================================================== [ 264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70 [ 264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201 [ 264.967870] [ 264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1 [ 264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0) [ 264.967887] Call Trace: [ 264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0) [ 264.967903] [<00000000017e379c>] dump_stack+0x23c/0x290 [ 264.967912] [<00000000007bc594>] print_address_description+0xf4/0x290 [ 264.967919] [<00000000007bc8fc>] kasan_report+0x13c/0x240 [ 264.967927] [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70 [ 264.967935] [<000000000163f890>] ip6_finish_output+0x430/0x7f0 [ 264.967943] [<000000000163fe44>] ip6_output+0x1f4/0x580 [ 264.967953] [<000000000163882a>] ip6_xmit+0xfea/0x1ce8 [ 264.967963] [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8 [ 264.968033] [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core] [ 264.968037] [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth] [ 264.968041] [<0000000001220020>] dev_hard_start_xmit+0x268/0x928 [ 264.968069] [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350 [ 264.968071] [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478 [ 264.968075] [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0 [ 264.968078] [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8 [ 264.968081] [<00000000013ddd1e>] ip_output+0x226/0x4c0 [ 264.968083] [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938 [ 264.968100] [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp] [ 264.968116] [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp] [ 264.968131] [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp] [ 264.968146] [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp] [ 264.968161] [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp] [ 264.968177] [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp] [ 264.968192] [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp] [ 264.968208] [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp] [ 264.968212] [<0000000001197942>] __sys_connect+0x21a/0x450 [ 264.968215] [<000000000119aff8>] sys_socketcall+0x3d0/0xb08 [ 264.968218] [<000000000184ea7a>] system_call+0x2a2/0x2c0 [...] Just like ip_finish_output2() does for IPv4, check that we have enough headroom in ip6_xmit(), and reallocate it if we don't. This issue is older than git history. Reported-by: NJianlin Shi <jishi@redhat.com> Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_tso_should_defer() can return true in three different cases : 1) We are cwnd-limited 2) We are rwnd-limited 3) We are application limited. Neal pointed out that my recent fix went too far, since it assumed that if we were not in 1) case, we must be rwnd-limited Fix this by properly populating the is_cwnd_limited and is_rwnd_limited booleans. After this change, we can finally move the silly check for FIN flag only for the application-limited case. The same move for EOR bit will be handled in net-next, since commit 1c09f7d0 ("tcp: do not try to defer skbs with eor mark (MSG_EOR)") is scheduled for linux-4.21 Tested by running 200 concurrent netperf -t TCP_RR -- -r 60000,100 and checking none of them was rwnd_limited in the chrono_stat output from "ss -ti" command. Fixes: 41727549 ("tcp: Do not underestimate rwnd_limited") Signed-off-by: NEric Dumazet <edumazet@google.com> Suggested-by: NNeal Cardwell <ncardwell@google.com> Reviewed-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Reviewed-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shmulik Ladkani 提交于
In 'seg6_output', stack variable 'struct flowi6 fl6' was missing initialization. Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2018 5 次提交
-
-
由 David S. Miller 提交于
Ido Schimmel says: ==================== mlxsw: Various fixes Patches #1 and #2 fix two VxLAN related issues. The first patch removes warnings that can currently be triggered from user space. Second patch avoids leaking a FID in an error path. Patch #3 fixes a too strict check that causes certain host routes not to be promoted to perform GRE decapsulation in hardware. Last patch avoids a use-after-free when deleting a VLAN device via an ioctl when it is enslaved to a bridge. I have a patchset for net-next that reworks this code and makes the driver more robust. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
When deleting a VLAN device using an ioctl the netdev is unregistered before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can lead to a use-after-free in mlxsw in case the VLAN device is deleted while being enslaved to a bridge. The reason for the above is that when mlxsw receives the CHANGEUPPER event, it wrongly assumes that the VLAN device is no longer its upper and thus destroys the internal representation of the bridge port despite the reference count being non-zero. Fix this by checking if the VLAN device is our upper using its real device. In net-next I'm going to remove this trick and instead make mlxsw completely agnostic to the order of the events. Fixes: c57529e1 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
GRE decap offload is configured when local routes prefix correspond to the local address of one of the offloaded GRE tunnels. The matching check was found to be too strict, such that for a flat GRE configuration, in which the overlay and underlay traffic share the same non-default VRF, decap flow was not offloaded. Relax the check for decap flow offloading. A match occurs if the local address of the tunnel matches the local route address while both share the same VRF table. Fixes: 4607f6d2 ("mlxsw: spectrum_router: Support IPv4 underlay decap") Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
It should never be possible for a user to set a VNI on a FID in case one is already set. The driver therefore returns an error, but fails to drop the reference count taken earlier when calling mlxsw_sp_fid_8021d_lookup(). Drop the reference when this unlikely error is hit. Fixes: 1c30d183 ("mlxsw: spectrum: Enable VxLAN enslavement to bridges") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
It is possible to trigger a warning in mlxsw in case a flood entry which mlxsw is not aware of is deleted from the VxLAN device. This is because mlxsw expects to find a singly linked list where the flood entry is present in. Fix by removing these warnings for now. Will re-add them in the next release after we teach mlxsw to ask for a dump of FDB entries from the VxLAN device, once it is enslaved to a bridge mlxsw cares about. Fixes: 6e6030bd ("mlxsw: spectrum_nve: Implement common NVE core") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2018 7 次提交
-
-
由 Jiri Wiesner 提交于
The *_frag_reasm() functions are susceptible to miscalculating the byte count of packet fragments in case the truesize of a head buffer changes. The truesize member may be changed by the call to skb_unclone(), leaving the fragment memory limit counter unbalanced even if all fragments are processed. This miscalculation goes unnoticed as long as the network namespace which holds the counter is not destroyed. Should an attempt be made to destroy a network namespace that holds an unbalanced fragment memory limit counter the cleanup of the namespace never finishes. The thread handling the cleanup gets stuck in inet_frags_exit_net() waiting for the percpu counter to reach zero. The thread is usually in running state with a stacktrace similar to: PID: 1073 TASK: ffff880626711440 CPU: 1 COMMAND: "kworker/u48:4" #5 [ffff880621563d48] _raw_spin_lock at ffffffff815f5480 #6 [ffff880621563d48] inet_evict_bucket at ffffffff8158020b #7 [ffff880621563d80] inet_frags_exit_net at ffffffff8158051c #8 [ffff880621563db0] ops_exit_list at ffffffff814f5856 #9 [ffff880621563dd8] cleanup_net at ffffffff814f67c0 #10 [ffff880621563e38] process_one_work at ffffffff81096f14 It is not possible to create new network namespaces, and processes that call unshare() end up being stuck in uninterruptible sleep state waiting to acquire the net_mutex. The bug was observed in the IPv6 netfilter code by Per Sundstrom. I thank him for his analysis of the problem. The parts of this patch that apply to IPv4 and IPv6 fragment reassembly are preemptive measures. Signed-off-by: NJiri Wiesner <jwiesner@suse.com> Reported-by: NPer Sundstrom <per.sundstrom@redqube.se> Acked-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Audykowicz 提交于
If for some reason an association's fragmentation point is zero, sctp_datamsg_from_user will try to endlessly try to divide a message into zero-sized chunks. This eventually causes kernel panic due to running out of memory. Although this situation is quite unlikely, it has occurred before as reported. I propose to add this simple last-ditch sanity check due to the severity of the potential consequences. Signed-off-by: NJakub Audykowicz <jakub.audykowicz@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
TCP loss probe timer may fire when the retranmission queue is empty but has a non-zero tp->packets_out counter. tcp_send_loss_probe will call tcp_rearm_rto which triggers NULL pointer reference by fetching the retranmission queue head in its sub-routines. Add a more detailed warning to help catch the root cause of the inflight accounting inconsistency. Reported-by: NRafael Tinoco <rafael.tinoco@linaro.org> Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If available rwnd is too small, tcp_tso_should_defer() can decide it is worth waiting before splitting a TSO packet. This really means we are rwnd limited. Fixes: 5615f886 ("tcp: instrument how long TCP is limited by receive window") Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Reviewed-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Alexei Starovoitov says: ==================== pull-request: bpf 2018-12-05 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix bpf uapi pointers for 32-bit architectures, from Daniel. 2) improve verifer ability to handle progs with a lot of branches, from Alexei. 3) strict btf checks, from Yonghong. 4) bpf_sk_lookup api cleanup, from Joe. 5) other misc fixes ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
list_del() leaves the skb->next pointer poisoned, which can then lead to a crash in e.g. OVS forwarding. For example, setting up an OVS VXLAN forwarding bridge on sfc as per: ======== $ ovs-vsctl show 5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30 Bridge "br0" Port "br0" Interface "br0" type: internal Port "enp6s0f0" Interface "enp6s0f0" Port "vxlan0" Interface "vxlan0" type: vxlan options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"} ovs_version: "2.5.0" ======== (where 10.0.0.5 is an address on enp6s0f1) and sending traffic across it will lead to the following panic: ======== general protection fault: 0000 [#1] SMP PTI CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:dev_hard_start_xmit+0x38/0x200 Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95 RSP: 0018:ffff888627b437e0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000 RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8 R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000 R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000 FS: 0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0 Call Trace: <IRQ> __dev_queue_xmit+0x623/0x870 ? masked_flow_lookup+0xf7/0x220 [openvswitch] ? ep_poll_callback+0x101/0x310 do_execute_actions+0xaba/0xaf0 [openvswitch] ? __wake_up_common+0x8a/0x150 ? __wake_up_common_lock+0x87/0xc0 ? queue_userspace_packet+0x31c/0x5b0 [openvswitch] ovs_execute_actions+0x47/0x120 [openvswitch] ovs_dp_process_packet+0x7d/0x110 [openvswitch] ovs_vport_receive+0x6e/0xd0 [openvswitch] ? dst_alloc+0x64/0x90 ? rt_dst_alloc+0x50/0xd0 ? ip_route_input_slow+0x19a/0x9a0 ? __udp_enqueue_schedule_skb+0x198/0x1b0 ? __udp4_lib_rcv+0x856/0xa30 ? __udp4_lib_rcv+0x856/0xa30 ? cpumask_next_and+0x19/0x20 ? find_busiest_group+0x12d/0xcd0 netdev_frame_hook+0xce/0x150 [openvswitch] __netif_receive_skb_core+0x205/0xae0 __netif_receive_skb_list_core+0x11e/0x220 netif_receive_skb_list+0x203/0x460 ? __efx_rx_packet+0x335/0x5e0 [sfc] efx_poll+0x182/0x320 [sfc] net_rx_action+0x294/0x3c0 __do_softirq+0xca/0x297 irq_exit+0xa6/0xb0 do_IRQ+0x54/0xd0 common_interrupt+0xf/0xf </IRQ> ======== So, in all listified-receive handling, instead pull skbs off the lists with skb_list_del_init(). Fixes: 9af86f93 ("net: core: fix use-after-free in __netif_receive_skb_list_core") Fixes: 7da517a3 ("net: core: Another step of skb receive list processing") Fixes: a4ca8b7d ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()") Fixes: d8269e2c ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()") Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2018-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg: ==================== As it's been a while, we have various fixes for * hwsim * AP mode (client powersave related) * CSA/FTM interaction * a busy loop in IE handling * and similar ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 12月, 2018 13 次提交
-
-
由 Jouni Malinen 提交于
This function was modified to support the information element extension case (WLAN_EID_EXTENSION) in a manner that would result in an infinite loop when going through set of IEs that include WLAN_EID_RIC_DATA and contain an IE that is in the after_ric array. The only place where this can currently happen is in mac80211 ieee80211_send_assoc() where ieee80211_ie_split_ric() is called with after_ric[]. This can be triggered by valid data from user space nl80211 association/connect request (i.e., requiring GENL_UNS_ADMIN_PERM). The only known application having an option to include WLAN_EID_RIC_DATA in these requests is wpa_supplicant and it had a bug that prevented this specific contents from being used (and because of that, not triggering this kernel bug in an automated test case ap_ft_ric) and now that this bug is fixed, it has a workaround to avoid this kernel issue. WLAN_EID_RIC_DATA is currently used only for testing purposes, so this does not cause significant harm for production use cases. Fixes: 2512b1b1 ("mac80211: extend ieee80211_ie_split to support EXTENSION") Cc: stable@vger.kernel.org Signed-off-by: NJouni Malinen <jouni@codeaurora.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
NullFunc packets should never be duplicate just like QoS-NullFunc packets. We saw a client that enters / exits power save with NullFunc frames (and not with QoS-NullFunc) despite the fact that the association supports HT. This specific client also re-uses a non-zero sequence number for different NullFunc frames. At some point, the client had to send a retransmission of the NullFunc frame and we dropped it, leading to a misalignment in the power save state. Fix this by never consider a NullFunc frame as duplicate, just like we do for QoS NullFunc frames. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449 CC: <stable@vger.kernel.org> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
If the buffered broadcast queue contains packets, letting new packets bypass that queue can lead to heavy reordering, since the driver is probably throttling transmission of buffered multicast packets after beacons. Keep buffering packets until the buffer has been cleared (and no client is in powersave mode). Cc: stable@vger.kernel.org Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
Make it behave like regular ieee80211_tx_status calls, except for the lack of filtered frame processing. This fixes spurious low-ack triggered disconnections with powersave clients connected to an AP. Fixes: f027c2ac ("mac80211: add ieee80211_tx_status_noskb") Cc: stable@vger.kernel.org Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Baruch Siach 提交于
The .validate phylink callback should empty the supported bitmap when the interface mode is invalid. Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reported-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baruch Siach 提交于
The mvpp2_phylink_validate() relies on the interface field of phylink_link_state to determine valid link modes. However, when called from phylink_sfp_module_insert() this field in not initialized. The default switch case then excludes 10G link modes. This allows 10G SFP modules that are detected correctly to be configured at max rate of 2.5G. Catch the uninitialized PHY mode case, and allow 10G rates. Fixes: d97c9f4a ("net: mvpp2: 1000baseX support") Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Saenz Julienne 提交于
After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Fixes: 414fd46e ("fsl/fman: Add FMan support") Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
kmsan was able to trigger a kernel-infoleak using a gre device [1] nlmsg_populate_fdb_fill() has a hard coded assumption that dev->addr_len is ETH_ALEN, as normally guaranteed for ARPHRD_ETHER devices. A similar issue was fixed recently in commit da715775 ("rtnetlink: Disallow FDB configuration for non-Ethernet device") [1] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x32d/0x480 lib/dump_stack.c:113 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634 copyout lib/iov_iter.c:143 [inline] _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 copy_to_iter include/linux/uio.h:143 [inline] skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline] netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0x1d1/0x230 net/socket.c:801 ___sys_recvmsg+0x444/0xae0 net/socket.c:2278 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441119 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119 RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100 R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080 R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_save_stack mm/kmsan/kmsan.c:261 [inline] kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469 kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344 kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362 __msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162 __nla_put lib/nlattr.c:744 [inline] nla_put+0x20a/0x2d0 lib/nlattr.c:802 nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466 nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline] ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807 rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979 netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170 kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186 __kmalloc+0x14c/0x4d0 mm/slub.c:3825 kmalloc include/linux/slab.h:551 [inline] __hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline] __hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline] __dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687 ip_mc_filter_add net/ipv4/igmp.c:1128 [inline] igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311 __ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444 ip_mc_inc_group net/ipv4/igmp.c:1453 [inline] ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775 inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522 notifier_call_chain kernel/notifier.c:93 [inline] __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401 __dev_notify_flags+0x3da/0x860 net/core/dev.c:1733 dev_change_flags+0x1ac/0x230 net/core/dev.c:7569 do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492 rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111 rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Bytes 36-37 of 105 are uninitialized Memory access of size 105 starts at ffff88819686c000 Data copied to user address 0000000020000380 Fixes: d83b0603 ("net: add fdb generic dump routine") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts: ef1b5bf5 ("net: phy: Fix not to call phy_resume() if PHY is not attached") 8c85f4b8 ("net: phy: micrel: add toggling phy reset if PHY is not attached") Andrew Lunn informs me that there are alternative efforts underway to fix this more properly. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Alexei Starovoitov says: ==================== Three patches to improve verifier ability to handle pathological bpf programs with a lot of branches: - make sure prog_load syscall can be aborted - improve branch taken analysis - introduce per-insn complexity limit for unprivileged programs ==================== Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Alexei Starovoitov 提交于
malicious bpf program may try to force the verifier to remember a lot of distinct verifier states. Put a limit to number of per-insn 'struct bpf_verifier_state'. Note that hitting the limit doesn't reject the program. It potentially makes the verifier do more steps to analyze the program. It means that malicious programs will hit BPF_COMPLEXITY_LIMIT_INSNS sooner instead of spending cpu time walking long link list. The limit of BPF_COMPLEXITY_LIMIT_STATES==64 affects cilium progs with slight increase in number of "steps" it takes to successfully verify the programs: before after bpf_lb-DLB_L3.o 1940 1940 bpf_lb-DLB_L4.o 3089 3089 bpf_lb-DUNKNOWN.o 1065 1065 bpf_lxc-DDROP_ALL.o 28052 | 28162 bpf_lxc-DUNKNOWN.o 35487 | 35541 bpf_netdev.o 10864 10864 bpf_overlay.o 6643 6643 bpf_lcx_jit.o 38437 38437 But it also makes malicious program to be rejected in 0.4 seconds vs 6.5 Hence apply this limit to unprivileged programs only. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Alexei Starovoitov 提交于
pathological bpf programs may try to force verifier to explode in the number of branch states: 20: (d5) if r1 s<= 0x24000028 goto pc+0 21: (b5) if r0 <= 0xe1fa20 goto pc+2 22: (d5) if r1 s<= 0x7e goto pc+0 23: (b5) if r0 <= 0xe880e000 goto pc+0 24: (c5) if r0 s< 0x2100ecf4 goto pc+0 25: (d5) if r1 s<= 0xe880e000 goto pc+1 26: (c5) if r0 s< 0xf4041810 goto pc+0 27: (d5) if r1 s<= 0x1e007e goto pc+0 28: (b5) if r0 <= 0xe86be000 goto pc+0 29: (07) r0 += 16614 30: (c5) if r0 s< 0x6d0020da goto pc+0 31: (35) if r0 >= 0x2100ecf4 goto pc+0 Teach verifier to recognize always taken and always not taken branches. This analysis is already done for == and != comparison. Expand it to all other branches. It also helps real bpf programs to be verified faster: before after bpf_lb-DLB_L3.o 2003 1940 bpf_lb-DLB_L4.o 3173 3089 bpf_lb-DUNKNOWN.o 1080 1065 bpf_lxc-DDROP_ALL.o 29584 28052 bpf_lxc-DUNKNOWN.o 36916 35487 bpf_netdev.o 11188 10864 bpf_overlay.o 6679 6643 bpf_lcx_jit.o 39555 38437 Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Alexei Starovoitov 提交于
Malicious user space may try to force the verifier to use as much cpu time and memory as possible. Hence check for pending signals while verifying the program. Note that suspend of sys_bpf(PROG_LOAD) syscall will lead to EAGAIN, since the kernel has to release the resources used for program verification. Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 04 12月, 2018 2 次提交
-
-
由 David S. Miller 提交于
Tariq Toukan says: ==================== mlx4 fixes for 4.20-rc This patchset includes small fixes for the mlx4_en driver. First patch by Eran fixes the value used to init the netdevice's min_mtu field. Please queue it to -stable >= v4.10. Second patch by Saeed adds missing Kconfig build dependencies. Series generated against net commit: 35b827b6 tun: forbid iface creation with rtnl ops ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-