- 09 11月, 2017 9 次提交
-
-
由 Vivien Didelot 提交于
The *_complete() functions take too much arguments to do only one thing: they try to fetch the dsa_port structures corresponding to device nodes under the "link" list property of DSA ports, and use them to setup the routing table of switches. This patch simplifies them by providing instead simpler dsa_{port,switch,tree}_setup_routing_table functions which return a boolean value, true if the tree is complete. dsa_tree_setup_routing_table is called inside dsa_tree_setup which simplifies the switch registering function as well. A switch's routing table is now initialized before its setup. This also makes dsa_port_is_valid obsolete, remove it. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The OF code provides a of_for_each_phandle() helper to iterate over phandles. Use it instead of arbitrary iterating ourselves over the list of phandles hanging to the "link" property of the port's device node. The of_phandle_iterator_next() helper calls of_node_put() itself on it.node. Thus We must only do it ourselves if we break the loop. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Instead of having two dsa_ds_find_port_dn (which returns a bool) and dsa_dst_find_port_dn (which returns a switch) functions, provide a more explicit dsa_tree_find_port_by_node function which returns a matching port. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The dsa_dsa_port_apply and dsa_cpu_port_apply functions do exactly the same. The dsa_user_port_apply function does not try to register a fixed link but try to create a slave. This commit factorizes and scopes all that in two convenient dsa_port_setup and dsa_port_teardown functions. It won't hurt to register a devlink_port for unused port as well. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
This patches brings no functional changes. It removes the unused dst argument from the dsa_ds_apply and dsa_ds_unapply functions, rename them to dsa_switch_setup and dsa_switch_teardown for a more explicit scope. This clarifies the steps of the setup or teardown of a switch fabric. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
This commit provides better scope for the DSA tree setup and teardown functions. It renames the "applied" bool to "setup" and print a message when the tree is setup, as it is done during teardown. At the same time, check dst->setup in dsa_tree_setup, where it is set to true. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add DSA helpers to setup and teardown a master net device wired to its CPU port. This centralizes the dsa_ptr assignment. This also makes the master ethtool helpers static at the same time. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The dsa_dst_parse function called just before dsa_dst_apply does not parse the tree but does only one thing: it assigns the default CPU port to dst->cpu_dp and to each user ports. This patch simplifies this by calling a dsa_tree_setup_default_cpu function at the beginning of dsa_dst_apply directly. A dsa_port_is_user helper is added for convenience. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
A DSA port has a dedicated CPU port assigned to it, stored in the cpu_dp member. It is not meant to be modified by a port, thus make it const. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 11月, 2017 1 次提交
-
-
由 Egil Hjelmeland 提交于
Remove scripts/checkpatch.pl CHECKs by adjusting indenting. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2017 10 次提交
-
-
由 Vivien Didelot 提交于
Extend the dsa_port_parse_cpu() function to resolve the tagging protocol at port parsing time, instead of waiting for the whole tree to be complete. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add dsa_port_parse_user, dsa_port_parse_dsa and dsa_port_parse_cpu functions to factorize the code shared by both OF and pdata parsing. They don't do much for the moment but will be extended later to support tagging protocol resolution for example. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
When parsing a port, simply use of_property_read_bool which checks the presence of a given property, instead of parsing the link phandle. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
When parsing a switch, we have to identify to which tree it belongs and parse its ports. Provide two functions to separate the OF and platform data specific paths. Also use the of_property_read_variable_u32_array function to parse the OF member array instead of calling of_property_read_u32_index twice. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
We will need a reference to the dsa_switch_tree when parsing a CPU port, so fetch it right after parsing the member and before parsing ports. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
This patch removes the unnecessary index argument from the dsa_dst_add_ds and dsa_dst_del_ds functions and renames them to dsa_tree_add_switch and dsa_tree_remove_switch respectively. In addition to a more explicit scope, we now check the presence of an existing switch with the same index directly within dsa_tree_add_switch. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Rename dsa_get_dst to dsa_tree_find since it doesn't increment the reference counter, rename dsa_add_dst to dsa_tree_alloc for symmetry with dsa_tree_free, and provide a convenient dsa_tree_touch function to find or allocate a new tree. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Provide convenient dsa_tree_get and dsa_tree_put functions scoping a DSA tree used to increment and decrement its reference counter, instead of poking directly its kref structure. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
DSA trees have a refcount used to automatically free the dsa_switch_tree structure once there is no switch devices inside of it. The refcount is incremented when a switch is added to the tree, and decremented when it is removed from it. But because of kref_init, the refcount is also incremented at initialization, and when looking up the tree from the list for symmetry. Thus the current code stores the number of switches plus one, and makes the switch registration more complex. To simplify the switch registration function, we reset the refcount to zero after initialization and don't increment it when looking up a tree. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Similarly to a DSA switch and port, rename the tree index from "tree" to "index" and make it an unsigned int because it isn't supposed to be less than 0. u32 is an OF specific data used to retrieve the value and has no need to be propagated up to the tree index. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2017 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org> Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Pirko 提交于
This restores the original behaviour before the block callbacks were introduced. Allow the drivers to do binding of block always, no matter if the NETIF_F_HW_TC feature is on or off. Move the check to the block callback which is called for rule insertion. Reported-by: NAlexander Duyck <alexander.duyck@gmail.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2017 9 次提交
-
-
由 Egil Hjelmeland 提交于
The chip flood broadcast and unknown multicast frames. On receive set skb->offload_fwd_mark to prevent the SW from flooding to the same ports. One exception: Because the ALR is set up to forward STP BPDUs only to CPU, the SW bridge should flood STP BPDUs if local STP is not enabled. This is archived by not setting skb->offload_fwd_mark on STP BPDUs. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Egil Hjelmeland 提交于
STP BPDUs arriving on user ports must sent to CPU port only, for processing by the SW bridge. Add an ALR entry with STP state override to fix that. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Egil Hjelmeland 提交于
lan9303_xmit_use_arl() introduced in previous patch set is wrong. The chip flood broadcast and unknown multicast frames. The effect is that broadcasts and multicasts are duplicated on egress. It is not possible to configure the chip to direct unknown multicasts to CPU port only. This means that only unicast frames can be transmitted using ALR lookup. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Now that slave dsa_port always have their name set, there is no need to pass it to dsa_slave_create() anymore. Remove this argument. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Get the optional "label" property and assign a default one directly at parse time instead of doing it when creating the slave. For legacy, simply assign the port name stored in cd->port_names. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Fetching the master device can be done directly when a port is parsed from device tree or pdata, instead of waiting until dsa_dst_parse. Now that -EPROBE_DEFER is returned before we add the switch to the tree, there is no need to check for this error after dsa_dst_parse. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Assign a port's type at parsed time instead of waiting for the tree to be completed. Because this is now done earlier, we can use the port's type in dsa_port_is_* helpers instead of digging again in topology description. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add symmetrical DSA port parsing functions for pdata and device tree, used to parse and validate a given port node or platform data. They don't do much for the moment but will be extended later on to assign a port type and get device references. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
There is no point into hiding the -EINVAL error code in ERR_PTR from a dsa_get_ports function, simply get the "ports" node directly from within the dsa_parse_ports_dn function. This also has the effect to make the pdata and device tree handling code symmetrical inside _dsa_register_switch. At the same time, rename dsa_parse_ports_dn to dsa_parse_ports_of because _of is a more common suffix for device tree parsing functions. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 10月, 2017 1 次提交
-
-
由 Vivien Didelot 提交于
The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 10月, 2017 6 次提交
-
-
由 Vivien Didelot 提交于
Now that DSA core provides port types, there is no need to keep this information at the switch level. This is a static information that is part of a DSA core dsa_port structure. Remove them. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Introduce an enumerated type for ports, which will be way more explicit to identify a port type instead of digging into switch port masks. A port can be of type CPU, DSA, user, or unused by default. This is a static parsed information that cannot be changed at runtime. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask mask which is more explicit. This will also minimize diffs when touching this internal mask. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Most of the DSA code still check ds->enabled_port_mask directly to inspect a given port type instead of using the provided dsa_is_user_port helper. Change this. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Egil Hjelmeland 提交于
When CPU transmit directly to port using tag, the LAN9303 does not learn MAC addresses received on the CPU port into the ALR. ALR learning is performed only when transmitting using ALR lookup. Solution: If the two external ports are bridged and the packet is not STP BPDU, then use ALR lookup to allow ALR learning on CPU port. Otherwise transmit directly to port with STP state override. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Remove the code that tried to identify if a PHY designated by Device Tree required diversion through the DSA-created MDIO bus. This was created mainly for the bcm_sf2.c driver back when it did not have its own MDIO bus driver, which it now has since 461cd1b0 ("net: dsa: bcm_sf2: Register our slave MDIO bus"). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Tested-by: NMartin Hundebøll <mnhu@prevas.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 10月, 2017 2 次提交
-
-
由 Vivien Didelot 提交于
The unapply functions are called on the error path. As for dsa_port_mask, enabled_port_mask and cpu_port_mask won't be used after so there's no need to unmask the corresponding port bit from them. This makes dsa_cpu_port_unapply() and dsa_dsa_port_unapply() identical, which can be factorized later. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The legacy code does not unmask the cpu_port_mask and dsa_port_mask as stated. But this is done on the error path and those masks won't be used after that. So instead of fixing the bit operation, simply remove it. Fixes: 83c0afae ("net: dsa: Add new binding implementation") Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-