- 12 4月, 2016 2 次提交
-
-
由 Michael Chan 提交于
Let firmware know that the driver is giving up control of the link so that it can be shutdown if no management firmware is running. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
10GBaseT devices must autonegotiate to determine master/slave clocking. Disallow forced speed in ethtool .set_settings() for these devices. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2016 2 次提交
-
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-next-for-davem-2016-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: iwlwifi * support for Link Quality measurement * more work 9000 devices and MSIx * continuation of the Dynamic Queue Allocation work * make the paging less memory hungry * 9000 new Rx path * removal of IWLWIFI_UAPSD Kconfig option ath10k * implement push-pull tx model using mac80211 software queuing support * enable scan in AP mode (NL80211_FEATURE_AP_SCAN) wil6210 * add basic PBSS (Personal Basic Service Set) support * add initial P2P support * add oob_mode module parameter ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
verifier is using the following structure to track the state of registers: struct reg_state { enum bpf_reg_type type; union { int imm; struct bpf_map *map_ptr; }; }; and later on in states_equal() does memcmp(&old->regs[i], &cur->regs[i],..) to find equivalent states. Throughout the code of verifier there are assignements to 'imm' and 'map_ptr' fields and it's not obvious that most of the assignments into 'imm' don't need to clear extra 4 bytes (like mark_reg_unknown_value() does) to make sure that memcmp doesn't go over junk left from 'map_ptr' assignment. Simplify the code by converting 'int' into 'long' Suggested-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2016 12 次提交
-
-
由 Eric Dumazet 提交于
A stupid refactoring bug in inet6_lookup_listener() needs to be fixed in order to get proper SO_REUSEPORT behavior. Fixes: 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty fixes from Greg KH: "Here are two tty fixes for issues found. One was due to a merge error in 4.6-rc1, and the other a regression fix for UML consoles that broke in 4.6-rc1. Both have been in linux-next for a while" * tag 'tty-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix merge of "tty: Refactor tty_open()" tty: Fix UML console breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.6-rc3. Nothing major, the normal USB gadget fixes and usb-serial driver ids, along with some other fixes mixed in. All except the USB serial ids have been tested in linux-next, the id additions should be fine as they are 'trivial'" * tag 'usb-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: option: add "D-Link DWM-221 B1" device id USB: serial: cp210x: Adding GE Healthcare Device ID USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices usb: dwc3: keystone: drop dma_mask configuration usb: gadget: udc-core: remove manual dma configuration usb: dwc3: pci: add ID for one more Intel Broxton platform usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done() usb: dwc2: do not override forced dr_mode in gadget setup usb: gadget: f_midi: unlock on error USB: digi_acceleport: do sanity checking for the number of ports USB: cypress_m8: add endpoint sanity check USB: mct_u232: add sanity checking in probe usb: fix regression in SuperSpeed endpoint descriptor parsing USB: usbip: fix potential out-of-bounds write usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler() usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize usb: phy: qcom-8x16: fix regulator API abuse usb: ch9: Fix SSP Device Cap wFunctionalitySupport type usb: gadget: composite: Access SSP Dev Cap fields properly ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO driver fixes from Greg KH: "Here are some IIO driver fixes, along with two staging driver fixes for 4.6-rc3. One staging driver patch reverts the deletion of a driver that happened in 4.6-rc1. We thought that laptop.org was dead, but it's still alive and kicking, and has users that were mad we broke their hardware by deleting a driver for their machines. So that driver is added back and everyone is happy again. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "Staging: olpc_dcon: Remove obsolete driver" staging/rdma/hfi1: select CRC32 iio: gyro: bmg160: fix buffer read values iio: gyro: bmg160: fix endianness when reading axes iio: accel: bmc150: fix endianness when reading axes iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE iio: fix config watermark initial value iio: health: max30100: correct FIFO check condition iio: imu: Fix inv_mpu6050 dependencies iio: adc: Fix build error of missing devm_ioremap_resource on UM iio: light: apds9960: correct FIFO check condition iio: adc: max1363: correct reference voltage iio: adc: max1363: add missing adc to max1363_id
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of eight fixes. Two are trivial gcc-6 updates (brace additions and unused variable removal). There's a couple of cxlflash regressions, a correction for sd being overly chatty on revalidation (causing excess log increases). A VPD issue which could crash USB devices because they seem very intolerant to VPD inquiries, an ALUA deadlock fix and a mpt3sas buffer overrun fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Do not attach VPD to devices that don't support it sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes scsi_dh_alua: Fix a recently introduced deadlock scsi: Declare local symbols static cxlflash: Move to exponential back-off when cmd_room is not available cxlflash: Fix regression issue with re-ordering patch mpt3sas: Don't overreach ioc->reply_post[] during initialization aacraid: add missing curly braces
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull MD fixes from Shaohua Li: "This update mainly fixes bugs: - fix error handling (Guoqing) - fix a crash when a disk is hotremoved (me) - fix a dead loop (Wei Fang)" * tag 'md/4.6-rc2-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/bitmap: clear bitmap if bitmap_create failed MD: add rdev reference for super write md: fix a trivial typo in comments md:raid1: fix a dead loop when read from a WriteMostly disk
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "Fixes for some issues discovered after recent changes and for some that have just been found lately regardless of those changes (intel_pstate, intel_idle, PM core, mailbox/pcc, turbostat) plus support for some new CPU models (intel_idle, Intel RAPL driver, turbostat) and documentation updates (intel_pstate, PM core). Specifics: - intel_pstate fixes for two issues exposed by the recent switch over from using timers and for one issue introduced during the 4.4 cycle plus new comments describing data structures used by the driver (Rafael Wysocki, Srinivas Pandruvada). - intel_idle fixes related to CPU offline/online (Richard Cochran). - intel_idle support (new CPU IDs and state definitions mostly) for Skylake-X and Kabylake processors (Len Brown). - PCC mailbox driver fix for an out-of-bounds memory access that may cause the kernel to panic() (Shanker Donthineni). - New (missing) CPU ID for one apparently overlooked Haswell model in the Intel RAPL power capping driver (Srinivas Pandruvada). - Fix for the PM core's wakeup IRQs framework to make it work after wakeup settings reconfiguration from sysfs (Grygorii Strashko). - Runtime PM documentation update to make it describe what needs to be done during device removal more precisely (Krzysztof Kozlowski). - Stale comment removal cleanup in the cpufreq-dt driver (Viresh Kumar). - turbostat utility fixes and support for Broxton, Skylake-X and Kabylake processors (Len Brown)" * tag 'pm+acpi-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs tools/power turbostat: work around RC6 counter wrap tools/power turbostat: initial KBL support tools/power turbostat: initial SKX support tools/power turbostat: decode BXT TSC frequency via CPUID tools/power turbostat: initial BXT support tools/power turbostat: print IRTL MSRs tools/power turbostat: SGX state should print only if --debug intel_idle: Add KBL support intel_idle: Add SKX support intel_idle: Clean up all registered devices on exit. intel_idle: Propagate hot plug errors. intel_idle: Don't overreact to a cpuidle registration failure. intel_idle: Setup the timer broadcast only on successful driver load. intel_idle: Avoid a double free of the per-CPU data. intel_idle: Fix dangling registration on error path. intel_idle: Fix deallocation order on the driver exit path. intel_idle: Remove redundant initialization calls. intel_idle: Fix a helper function's return value. intel_idle: remove useless return from void function. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Stale SKB data pointer access across pskb_may_pull() calls in L2TP, from Haishuang Yan. 2) Fix multicast frame handling in mac80211 AP code, from Felix Fietkau. 3) mac80211 station hashtable insert errors not handled properly, fix from Johannes Berg. 4) Fix TX descriptor count limit handling in e1000, from Alexander Duyck. 5) Revert a buggy netdev refcount fix in netpoll, from Bjorn Helgaas. 6) Must assign rtnl_link_ops of the device before registering it, fix in ip6_tunnel from Thadeu Lima de Souza Cascardo. 7) Memory leak fix in tc action net exit, from WANG Cong. 8) Add missing AF_KCM entries to name tables, from Dexuan Cui. 9) Fix regression in GRE handling of csums wrt. FOU, from Alexander Duyck. 10) Fix memory allocation alignment and congestion map corruption in RDS, from Shamir Rabinovitch. 11) Fix default qdisc regression in tuntap driver, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge, netem: mark mailing lists as moderated tuntap: restore default qdisc mpls: find_outdev: check for err ptr in addition to NULL check ipv6: Count in extension headers in skb->network_header RDS: fix congestion map corruption for PAGE_SIZE > 4k RDS: memory allocated must be align to 8 GRE: Disable segmentation offloads w/ CSUM and we are encapsulated via FOU net: add the AF_KCM entries to family name tables MAINTAINERS: intel-wired-lan list is moderated lib/test_bpf: Add additional BPF_ADD tests lib/test_bpf: Add test to check for result of 32-bit add that overflows lib/test_bpf: Add tests for unsigned BPF_JGT lib/test_bpf: Fix JMP_JSET tests VSOCK: Detach QP check should filter out non matching QPs. stmmac: fix adjust link call in case of a switch is attached af_packet: tone down the Tx-ring unsupported spew. net_sched: fix a memory leak in tc action samples/bpf: Enable powerpc support samples/bpf: Use llc in PATH, rather than a hardcoded value samples/bpf: Fix build breakage with map_perf_test_user.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "These are bug fixes, including a really old fsync bug, and a few trace points to help us track down problems in the quota code" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix file/data loss caused by fsync after rename and new inode btrfs: Reset IO error counters before start of device replacing btrfs: Add qgroup tracing Btrfs: don't use src fd for printk btrfs: fallback to vmalloc in btrfs_compare_tree btrfs: handle non-fatal errors in btrfs_qgroup_inherit() btrfs: Output more info for enospc_debug mount option Btrfs: fix invalid reference in replace_path Btrfs: Improve FL_KEEP_SIZE handling in fallocate
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux由 Linus Torvalds 提交于
Pull orangefs fixes from Mike Marshall: "Orangefs cleanups and a strncpy vulnerability fix. Cleanups: - remove an unused variable from orangefs_readdir. - clean up printk wrapper used for ofs "gossip" debugging. - clean up truncate ctime and mtime setting in inode.c - remove a useless null check found by coccinelle. - optimize some memcpy/memset boilerplate code. - remove some useless sanity checks from xattr.c Fix: - fix a potential strncpy vulnerability" * tag 'for-linus-4.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: remove unused variable orangefs: Add KERN_<LEVEL> to gossip_<level> macros orangefs: strncpy -> strscpy orangefs: clean up truncate ctime and mtime setting Orangefs: fix ifnullfree.cocci warnings Orangefs: optimize boilerplate code. Orangefs: xattr.c cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from Joerg Roedel: - compile-time fixes (warnings and failures) - a bug in iommu core code which could cause the group->domain pointer to be falsly cleared - fix in scatterlist handling of the ARM common DMA-API code - stall detection fix for the Rockchip IOMMU driver * tag 'iommu-fixes-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Silence an uninitialized variable warning iommu/rockchip: Fix "is stall active" check iommu: Don't overwrite domain pointer when there is no default_domain iommu/dma: Restore scatterlist offsets correctly iommu: provide of_xlate pointer unconditionally
- 09 4月, 2016 24 次提交
-
-
由 John Allen 提交于
Enables the use of multiple transmit and receive scrqs allowing the ibmvnic driver to take advantage of multiqueue functionality. To achieve this, the driver must implement the process of negotiating the maximum number of queues allowed by the server. Initially, the driver will attempt to login with the maximum number of tx and rx queues supported by the server. If the server fails to allocate the requested number of scrqs, it will return partial success in the login response. In this case, we must reinitiate the login process from the request capabilities stage and attempt to login requesting fewer scrqs. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Kroah-Hartman 提交于
Merge tag 'usb-serial-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc3 Here are some new device ids. Signed-off-by: NJohan Hovold <johan@kernel.org>
-
由 David S. Miller 提交于
Vivien Didelot says: ==================== net: dsa: voidify STP setter and FDB/VLAN add ops Neither the DSA layer nor the bridge code (see br_set_state) really care about eventual errors from STP state setters, so make it void. The DSA layer separates the prepare and commit phases of switchdev in two different functions. Logical errors must not happen in commit routines, so make them void. Changes v1 -> v2: - rename port_stp_update to port_stp_state_set - don't change code flow of bcm_sf2_sw_br_set_stp_state - prefer netdev_err over netdev_warn ==================== Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The switchdev design implies that a software error should not happen in the commit phase since it must have been previously reported in the prepare phase. If an hardware error occurs during the commit phase, there is nothing switchdev can do about it. The DSA layer separates port_vlan_prepare and port_vlan_add for simplicity and convenience. If an hardware error occurs during the commit phase, there is no need to report it outside the driver itself. Make the DSA port_vlan_add routine return void for explicitness. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The switchdev design implies that a software error should not happen in the commit phase since it must have been previously reported in the prepare phase. If an hardware error occurs during the commit phase, there is nothing switchdev can do about it. The DSA layer separates port_fdb_prepare and port_fdb_add for simplicity and convenience. If an hardware error occurs during the commit phase, there is no need to report it outside the DSA driver itself. Make the DSA port_fdb_add routine return void for explicitness. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The DSA layer doesn't care about the return code of the port_stp_update routine, so make it void in the layer and the DSA drivers. Replace the useless dsa_slave_stp_update function with a dsa_slave_stp_state function used to reply to the switchdev SWITCHDEV_ATTR_ID_PORT_STP_STATE attribute. In the meantime, rename port_stp_update to port_stp_state_set to explicit the state change. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add description for the missing port_vlan_prepare, port_fdb_prepare, port_fdb_dump functions in the DSA documentation. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-next-for-davem-2016-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the 4.7 cycle, we have a number of changes: * Bob's mesh mode rhashtable conversion, this includes the rhashtable API change for allocation flags * BSSID scan, connect() command reassoc support (Jouni) * fast (optimised data only) and support for RSS in mac80211 (myself) * various smaller changes ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2016-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== For the current RC series, we have the following fixes: * TDLS fixes from Arik and Ilan * rhashtable fixes from Ben and myself * documentation fixes from Luis * U-APSD fixes from Emmanuel * a TXQ fix from Felix * and a compiler warning suppression from Jeff ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
I moderate these (lightly loaded) lists to block spam. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
The verifier needs to go through every path of the program in order to check that it terminates safely, which can be quite a lot of instructions that need to be processed f.e. in cases with more branchy programs. With search pruning from f1bca824 ("bpf: add search pruning optimization to verifier") the search space can already be reduced significantly when the verifier detects that a previously walked path with same register and stack contents terminated already (see verifier's states_equal()), so the search can skip walking those states. When working with larger programs of > ~2000 (out of max 4096) insns, we found that the current limit of 32k instructions is easily hit. For example, a case we ran into is that the search space cannot be pruned due to branches at the beginning of the program that make use of certain stack space slots (STACK_MISC), which are never used in the remaining program (STACK_INVALID). Therefore, the verifier needs to walk paths for the slots in STACK_INVALID state, but also all remaining paths with a stack structure, where the slots are in STACK_MISC, which can nearly double the search space needed. After various experiments, we find that a limit of 64k processed insns is a more reasonable choice when dealing with larger programs in practice. This still allows to reject extreme crafted cases that can have a much higher complexity (f.e. > ~300k) within the 4096 insns limit due to search pruning not being able to take effect. Furthermore, we found that a lot of states can be pruned after a call instruction, f.e. we were able to reduce the search state by ~35% in some cases with this heuristic, trade-off is to keep a bit more states in env->explored_states. Usually, call instructions have a number of preceding register assignments and/or stack stores, where search pruning has a better chance to suceed in states_equal() test. The current code marks the branch targets with STATE_LIST_MARK in case of conditional jumps, and the next (t + 1) instruction in case of unconditional jump so that f.e. a backjump will walk it. We also did experiments with using t + insns[t].off + 1 as a marker in the unconditionally jump case instead of t + 1 with the rationale that these two branches of execution that converge after the label might have more potential of pruning. We found that it was a bit better, but not necessarily significantly better than the current state, perhaps also due to clang not generating back jumps often. Hence, we left that as is for now. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
After commit f84bb1ea ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev"), default qdisc was changed to noqueue because tuntap does not set tx_queue_len during .setup(). This patch restores default qdisc by setting tx_queue_len in tun_setup(). Fixes: f84bb1ea ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev") Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Brandenburg 提交于
Signed-off-by: NMartin Brandenburg <martin@omnibond.com> Signed-off-by: NMike Marshall <hubcap@omnibond.com>
-
由 Rafael J. Wysocki 提交于
* pm-core: PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs PM / runtime: Document steps for device removal * powercap: powercap: intel_rapl: Add missing Haswell model * pm-tools: tools/power turbostat: work around RC6 counter wrap tools/power turbostat: initial KBL support tools/power turbostat: initial SKX support tools/power turbostat: decode BXT TSC frequency via CPUID tools/power turbostat: initial BXT support tools/power turbostat: print IRTL MSRs tools/power turbostat: SGX state should print only if --debug
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: cpufreq: dt: Drop stale comment cpufreq: intel_pstate: Documenation for structures cpufreq: intel_pstate: fix inconsistency in setting policy limits intel_pstate: Avoid extra invocation of intel_pstate_sample() intel_pstate: Do not set utilization update hook too early * pm-cpuidle: intel_idle: Add KBL support intel_idle: Add SKX support intel_idle: Clean up all registered devices on exit. intel_idle: Propagate hot plug errors. intel_idle: Don't overreact to a cpuidle registration failure. intel_idle: Setup the timer broadcast only on successful driver load. intel_idle: Avoid a double free of the per-CPU data. intel_idle: Fix dangling registration on error path. intel_idle: Fix deallocation order on the driver exit path. intel_idle: Remove redundant initialization calls. intel_idle: Fix a helper function's return value. intel_idle: remove useless return from void function. * acpi-cppc: mailbox: pcc: Don't access an unmapped memory address space
-
由 Jiri Pirko 提交于
Ptr to devlink structure can be easily obtained from devlink_port->devlink. So share user_ptr[0] pointer for both and leave user_ptr[1] free for other users. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: small driver update + one tiny devlink dependency Cosmetics, in preparation to sharedbuffer patchset. First patch is here to allow patch number two. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Fix copy&paste error and state the name of SBPM register correctly. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Same field, same values, so share the same enum. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Instead of that, pass mlxsw_core and use a helper to get driver priv from driver code. Looks much cleaner that way. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Instead of passing around driver priv, pass struct mlxsw_core * directly. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Remove devlink port reg/unreg from spectrum and switchx2 code and rather do the common work in core. That also ensures code separation where devlink is only used in core.c. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
As we rely on caller zeroing or correctly set the struct before the call, this implicit type set is either no-op (DEVLINK_PORT_TYPE_NOTSET is 0) or it rewrites wanted value. So remove this. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== MTU/buffer reconfig changes I re-discussed MPLS/MTU internally, dropped it from the patch 1, re-tested everything, found out I forgot about debugfs pointers, fixed that as well. v5: - don't reserve space in RX buffers for MPLS label stack (patch 1); - fix debugfs pointers to ring structures (patch 5). v4: - cut down on unrelated patches; - don't "close" the device on error path. --- v4 cover letter Previous series included some not entirely related patches, this one is cut down. Main issue I'm trying to solve here is that .ndo_change_mtu() in nfpvf driver is doing full close/open to reallocate buffers - which if open fails can result in device being basically closed even though the interface is started. As suggested by you I try to move towards a paradigm where the resources are allocated first and the MTU change is only done once I'm certain (almost) nothing can fail. Almost because I need to communicate with FW and that can always time out. Patch 1 fixes small issue. Next 10 patches reorganize things so that I can easily allocate new rings and sets of buffers while the device is running. Patches 13 and 15 reshape the .ndo_change_mtu() and ethtool's ring-resize operation into desired form. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-