- 02 1月, 2013 5 次提交
-
-
由 Sony Chacko 提交于
Add 83xx sysfs interface routines Update 82xx sysfs interface routines Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Enable base 83xx adapter driver. Common driver interface routines like probe, interface up/down routines, irq and resource allocation routines are modified to add support for 83xx adapter. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Add 83xx adapter data path routines Update few 82xx adapter data path routines Modify datapath resource allocation routines Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
83xx adapter register map. 83xx hardware interface routines. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Refactor 82xx driver to support new adapter - Qlogic 83XX CNA Create adapter abstraction layer and seperate 82xx hardware access routines. Create mailbox based HW interface mechanism Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2012 1 次提交
-
-
Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 12月, 2012 5 次提交
-
-
由 Sony Chacko 提交于
Refactor 82xx driver to support new adapter Update routines to support variable number of NIC partitions Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Cleanup get board information API. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Refactor 82xx driver to support new adapter Update PCI and hardware access routines Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Move HW specific data to a seperate structure as part of refactoring 82xx adapter driver. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Add 82xx adapter ID check before 82xx specific operations as part of refactoring the driver to enable support for new adapter. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2012 3 次提交
-
-
由 Sony Chacko 提交于
Physical refactoring of 82xx adapter register dump utility. Move register dump routines to new file qlcnic_minidump.c Existing register dump routines has coding style issues, the code is moved to the new file without fixing the style issues. There is a seperate patch to fix the style issues in qlcnic_minidump.c Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Physical refactoring of 82xx adapter sysfs routines. Move sysfs routines to new file qlcnic_sysfs.c Existing sysfs routines has coding style issues, this code is moved to the new file without fixing the style issues. There is a seperate patch to fix the style issues in qlcnic_sysfs.c Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Physical refactoring of 82xx adapter data path routines. Move data path code to new file qlcnic_io.c Existing data path code has coding stye issues, the code is moved to the new file without fixing the style issues. There is a seperate patch to fix the style issues in qlcnic_io.c Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2012 1 次提交
-
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2012 1 次提交
-
-
由 Sony Chacko 提交于
Fix the following warnings: qlcnic_main.c: In function 'qlcnic_update_cmd_producer': qlcnic_main.c:119:51: warning: unused parameter 'adapter' [-Wunused-parameter] qlcnic_main.c:119: warning: unused parameter adapter qlcnic_init.c: In function qlcnic_process_lro qlcnic_init.c:1586: warning: unused parameter sds_ring qlcnic_init.c: In function qlcnic_process_rcv_diag qlcnic_init.c:1854: warning: unused parameter sds_ring qlcnic_init.c: In function qlcnic_fetch_mac qlcnic_init.c:1938: warning: unused parameter adapter warning: 'pci_using_dac' may be used uninitialized in this function [-Wmaybe-uninitialized] qlcnic_main.c:1569:10: note: 'pci_using_dac' was declared here Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2012 3 次提交
-
-
由 Rajesh Borundia 提交于
o Use correct l3 (ETH_IP or ETH_IPV6)protcol in case of inband vlan. Because of incorrect protcol type driver was setting incorrect opcode. This resulted in adapter calculating checksum incorrectly. o Updated driver version to 5.0.29 Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Add debug messages for FW CDRP command failure. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Linux stack estimates MSS from skb->len or skb_shinfo(skb)->gso_size. In case of LRO skb->len is aggregate of len of number of packets hence MSS obtained using skb->len would be incorrect. Incorrect estimation of recv MSS would lead to delayed acks in some traffic patterns (which sends two or three packets and wait for ack and only then send remaining packets). This leads to drop in performance. Hence we need to set gso_size to MSS obtained from firmware. o This is fixed recently in firmware hence the MSS is obtained based on capability. If fw is capable of sending the MSS then only driver sets the gso_size. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2012 3 次提交
-
-
由 Manish Chopra 提交于
o 0x3, 0x7, 0xF, 0x1F, 0x3F, 0x7F and 0xFF are the allowed capture masks. o Updated driver version to 5.0.28 Signed-off-by: NManish chopra <manish.chopra@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Without failing probe, register netdevice when device is in FAILED state. o Device will come up with minimum functionality. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2012 1 次提交
-
-
由 Anirban Chakraborty 提交于
- After FW reset, IP addresses need to be reprogrammed to FW for LRO to work. This was not happening in context reset path. Fixed it here. - Updated driver version to 5.0.27 Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2012 1 次提交
-
-
由 Manish chopra 提交于
Log dump status. Remove unmatched qlcnic_api_unlock call. Update version to 5.0.26. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2011 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o Updated version number to 5.0.25 o Do not hold onto RESETTING_BIT for entire duration of LED/ beacon test. Instead, just checking for RESETTING_BIT not set before sending config_led command down to card. o Take rtnl_lock instead of RESETTING_BIT for beacon test while sending config_led command down to make sure interface cannot be brought up/ down. o Allocate and free resources if interface is down before sending the config_led command. This is to make sure config_led command sending doesn't fail. o Clear QLCNIC_LED_ENABLE bit if beacon/ LED test fails to start. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2011 1 次提交
-
-
由 Anirban Chakraborty 提交于
Argument list to CDRP function has become unmanageably long. Fix it by properly declaring a struct that encompasses all the input and output parameters. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2011 3 次提交
-
-
由 Sucheta Chakraborty 提交于
Beacon test flashes both port LEDs instead of just 1 LED of a port. Updated driver version to 5.0.23. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Reading CRB registers(if reqd) before releasing the api lock. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
The FLT entry for FW image region has changed for C0 cards. Updated the driver to look at the right region in the FLT. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com>
-
- 01 8月, 2011 3 次提交
-
-
由 Sritej Velaga 提交于
Now printing states of essential registers once fw hang has been detected. Bumped up the driver version to 5.0.22 Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Driver should not check for heart beat anymore when FW is hung, rather it should restart the FW. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anirban Chakraborty 提交于
o Added code to support FW reset without invoking the dump o Fixed the return value of the dump data size if dump is not available. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2011 4 次提交
-
-
由 Anirban Chakraborty 提交于
o Change FW dump capture mask to a defult value, instead of using the recommended value from the FW. This was done to keep the capture mask consistent with other function drivers. o Update driver version to 5.0.21 Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
o Defined error code such as fw not responding, test already running and cable not connected. o Check Fw capability before performing loopback test. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
MAC learning is required in bridge mode. During bridge mode device will be put in promiscous mode. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Added QME8242-k 10GbE Dual Port Mezzanine Card to supported card info. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2011 1 次提交
-
-
由 Amit Kumar Salecha 提交于
o Add external loopback test in self test: - Send set external loopback mode request to fw. To quiscent other storage functions. - Perform test - Send unset loopback mode request to fw. o Rename ilb to lb. o Update driver version 5.0.20. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2011 1 次提交
-
-
由 Sucheta Chakraborty 提交于
Driver will generate loopback traffic pattern and do the test. And returns result of the test to application. Updated driver version to 5.0.19. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-