Impact: Reduce memory usage, use new API.

This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS.  cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).

(Changes to powernow-k* by <travis>.)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: reduce stack size, use new API.

Replace cpumask_t with cpumask_var_t.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Reduce future system panics due to cpumask operations using NR_CPUS

Insure that code does not look at bits >= nr_cpu_ids as when cpumasks are
allocated based on nr_cpu_ids, these extra bits will not be defined.

Also some other minor updates:

   * change in to use cpu accessor function set_cpu_present() instead of
     directly accessing cpu_present_map w/cpu_clear() [arch/x86/kernel/reboot.c]

   * use cpumask_of() instead of &cpumask_of_cpu() [arch/x86/kernel/reboot.c]

   * optimize some cpu_mask_to_apicid_and functions.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: enables /sys/devices/system/cpu/{kernel_max,offline} user interface

By setting total_cpus, the drivers/base/cpu.c will display the
values of kernel_max (NR_CPUS-1) and the offlined cpu map.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on ia64

ia64's default_affinity_write() still had old cpumask_t usage:

 /home/mingo/tip/kernel/irq/proc.c: In function `default_affinity_write':
 /home/mingo/tip/kernel/irq/proc.c:114: error: incompatible type for argument 1 of `is_affinity_mask_valid'
 make[3]: *** [kernel/irq/proc.o] Error 1
 make[3]: *** Waiting for unfinished jobs....

update it to cpumask_var_t.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Like fls, but can't be handed 0 and returns the bit number.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Like fls, but can't be handed 0 and returns the bit number.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Impact: Reduce stack usage, use new cpumask API.  ALPHA mod!

Main change is that irq_default_affinity becomes a cpumask_var_t, so
treat it as a pointer (this effects alpha).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Impact: New API

The old topology_core_siblings() and topology_thread_siblings() return
a cpumask_t; these new ones return a (const) struct cpumask *.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: New API

The old topology_core_siblings() and topology_thread_siblings() return
a cpumask_t; these new ones return a (const) struct cpumask *.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: New API

The old topology_core_siblings() and topology_thread_siblings() return
a cpumask_t; these new ones return a (const) struct cpumask *.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: New API

The old topology_core_siblings() and topology_thread_siblings() return
a cpumask_t; these new ones return a (const) struct cpumask *.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>

Like fls, but can't be handed 0 and returns the bit number.

(I broke this arch in linux-next by using __fls in generic code).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Like fls, but can't be handed 0 and returns the bit number.

(I broke this arch in linux-next by using __fls in generic code).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NMike Frysinger <vapier@gentoo.org>

Like fls, but can't be handed 0 and returns the bit number.

(I broke this arch in linux-next by using __fls in generic code).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is defined in linux/cpumask.h (included in this file already),
and this is now defined differently.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: linux-parisc@vger.kernel.org

Impact: CPU iterator bugfixes

Percpu areas are only allocated for possible cpus.  In general, you
shouldn't access random cpu's percpu areas.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NHirokazu Takata <takata@linux-m32r.org>

Impact: fix IA64 compile

Fortunately, they have exactly the same semantics.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This patch moves the initial guest page table creation code to the host,
so the launcher keeps working with PAE enabled configs.
Signed-off-by: NMatias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This doesn't really matter, since s390 pagesize is 4k anyway.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Impact: fix section mismatch warning

Commit b2bb8554 ("x86: Remove cpumask games
in x86/kernel/cpu/intel_cacheinfo.c") introduced get_cpu_leaves(), which
references __cpuinit cpuid4_cache_lookup().

Mark get_cpu_leaves() with a __cpuinit annotation.
Signed-off-by: NSergio Luis <sergio@larces.uece.br>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

PXA27x and later processors support overlay1 and overlay2 on-top of the
base framebuffer (although under-neath the base is also possible). They
support palette and no-palette RGB formats, as well as YUV formats (only
available on overlay2). These overlays have dedicated DMA channels and
behave in a similar way as a framebuffer.

This heavily simplified and re-structured work is based on the original
pxafb_overlay.c (which is pending for mainline merge for a long time).

The major problems with this pxafb_overlay.c are (if you are interested
in the history):

  1. heavily redundant (the control logics for overlay1 and overlay2 are
     actually identical except for some small operations,  which are now
     abstracted into a 'pxafb_layer_ops' structure)

  2. a lot of useless and un-tested code (two workarounds which are now
     fixed on mature silicons)

  3. cursorfb is actually useless, hardware cursor should not be used
     this way, and the code was actually un-tested for a long time.

The code in this patch should be self-explanatory, I tried to add minimum
comments. As said, this is basically simplified, there are several things
still on the pending list:

  1. palette mode is un-supported and un-tested (although re-using the
     palette code of the base framebuffer is actually very easy now with
     previous clean-up patches)

  2. fb_pan_display for overlay(s) is un-supported

  3. the base framebuffer can actually be abstracted by 'pxafb_layer' as
     well, which will help further re-use of the code and keep a better
     and consistent structure. (This is the reason I named it 'pxafb_layer'
     instead of 'pxafb_overlay' or something alike)

See Documentation/fb/pxafb.txt for additional usage information.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: NEric Miao <ycmiao@ycmiao-hp520.(none)>

1. introduce var_to_depth() to calculate the color depth including the
   transparency bit

2. the conversion from 'fb_var_screeninfo' to LCCR3 BPP bits can be re-
   used by overlays (in OVLxC1), thus an individual pxafb_var_to_bpp()
   has been separated out.

3. pxafb_setmode() should really set the color bitfields correctly at
   begining, introduce a pxafb_set_pixfmt() for this

4. allow user apps to specify color formats within fb_var_screeninfo,
   and checking of this in pxafb_check_var() has been simplified as
   below:

   a) pxafb_var_to_bpp() should pass - which means a basically correct
      bits_per_pixel and color depth setting
   b) the RGBT bitfields are then forced into supported values by
      pxafb_set_pixfmt()
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NEric Miao <ycmiao@ycmiao-hp520.(none)>

Add the palette format support for LCCR4_PAL_FOR_3, and fix the
issue of LCCR4 being never assigned.

Also remove the useless pxafb_set_truecolor().
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NEric Miao <ycmiao@ycmiao-hp520.(none)>

dma branching is enabled by extending the current setup_frame_dma()
function to allow a 2nd set of frame/palette dma descriptors to be
used.

As a result, pxafb_dma_buff.dma_desc[], pxafb_dma_buff.pal_desc[]
and pxafb_info.fdadr[] are doubled.

This allows maximum re-use of the current dma setup code, although
the pxafb_info.fdadr[xx] for FBRx register values looks a bit odd.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NEric Miao <ycmiao@ycmiao-hp520.(none)>

The amount of video memory size is decided according to the following
order:

1. <xres> x <yres> x <bits_per_pixel> by default, which is the backward
   compatible way

2. size specified in platform data

3. size specified in module parameter 'options' string or specified in
   kernel boot command line (see updated Documentation/fb/pxafb.txt)

And now since the memory is allocated from system memory, the pxafb_mmap
can be removed and the default fb_mmap() should be working all right.

Also, since we now have introduced the 'struct pxafb_dma_buff' for DMA
descriptors and palettes, the allocation can be separated cleanly.

NOTE: the LCD DMA actually supports chained transfer (i.e. page-based
transfers), to simplify the logic and keep the performance (with less
TLB misses when accessing from memory mapped user space), the memory
is allocated by alloc_pages_*() to ensures it's physical contiguous.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NEric Miao <ycmiao@ycmiao-hp520.(none)>

As Nicolas and Russell pointed out, CLOCK_TICK_RATE is no more
a constant on PXA when multiple processors and platforms are
selected, change TIMER_FREQ in rtc-sa1100.c into a variable.

Since the code to decide the clock tick rate is re-used from
timer.c, introduce a common get_clock_tick_rate() for this.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Acked-by: NNicolas Pitre <nico@marvell.com>

Signed-off-by: NEric Miao <eric.miao@marvell.com>

The block layer dropped the virtual merge feature
(b8b3e16c). BIO_VMERGE_BOUNDARY
definition is meaningless now.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The mm->ioctx_list is currently protected by a reader-writer lock,
so we always grab that lock on the read side for doing ioctx
lookups. As the workload is extremely reader biased, turn this into
an rcu hlist so we can make lookup_ioctx() lockless. Get rid of
the rwlock and use a spinlock for providing update side exclusion.

There's usually only 1 entry on this list, so it doesn't make sense
to look into fancier data structures.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This adds support for 16k and 64k page sizes on PowerPC 44x processors.

The PGDIR table is much smaller than a page when using 16k or 64k
pages (512 and 32 bytes respectively) so we allocate the PGDIR with
kzalloc() instead of __get_free_pages().

One PTE table covers rather a large memory area when using 16k or 64k
pages (32MB or 512MB respectively), so we can easily put FIXMAP and
PKMAP in the area covered by one PTE table.
Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
Signed-off-by: NVladimir Panfilov <pvr@emcraft.com>
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Ensure that total memory size is page-aligned, because otherwise
mark_bootmem() gets upset.

This error case was triggered by using 64 KiB pages in the kernel
while arch/powerpc/boot/4xx.c arbitrarily reduced the amount of memory
by 4096 (to work around a chip bug that affects the last 256 bytes of
physical memory).
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix the warning: trigraph ??/ ignored, use -trigraphs to enable
caused by the recent removal of -traditional option.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

No-one seems to know how to mask individual baboon interrupts, so we just 
mask the umbrella IRQ. This will work as long as only the IDE driver uses 
the baboon chip (it can't deadlock). Use mac_enable_irq/mac_disable_irq 
rather than enable_irq/disable_irq because the latter routines count the 
depth of nested calls which triggers a warning and call trace because 
IRQ_NUBUS_C is enabled twice in a row (once when the baboon handler is 
registered, and once when the IDE IRQ is registered).
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Remove some more cruft from machw.h and drop the #include where it isn't
needed.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

No behavioural changes, just cleanups and better documentation.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Reinstate the Mac hardware clock for CUDA ADB and Mac II ADB models.
It doesn't work properly on Mac IIsi ADB and PMU ADB yet, so leave them 
out.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

It is counter intuitive to have the select listed
as part of the PCI option.
Move the select to the SPARC64 specific part of the config.

PCI_MSI has a dependency on PCI so it does not harm to have
it always selected.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SUN_IO is always 'y' so drop it and thus killing an ifdef/endif pair
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While doing this use standard names for start/end
so we could use definitions straight from asm-generic
for all the typical symbols.

This also allowed us to drop the use of PROVIDE in the linker
script so sprc is less non-standard on this area.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>