- 16 7月, 2018 3 次提交
-
-
由 Ulf Hansson 提交于
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: - A fix for OMAP5 and DRA7 to make the branch predictor hardening settings take proper effect on secondary cores - Disable USB OTG on am3517 since current driver isn't working - Fix thermal sensor register settings on Armada 38x - Fix suspend/resume IRQs on pxa3xx * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores ARM: pxa: irq: fix handling of ICMR registers in suspend/resume ARM: dts: armada-38x: use the new thermal binding
-
- 15 7月, 2018 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull RTC fixes from Alexandre Belloni: "Two fixes for 4.18: - an important core fix for RTCs using the core offsetting only one driver is affected - a fix for the error path of mrst" * tag 'rtc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: fix alarm read and set offset rtc: mrst: fix error code in probe()
-
由 Olof Johansson 提交于
Merge tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two omap fixes for v4.18-rc cycle Turns out the recent patches for ARM branch predictor hardening are not working on omap5 and dra7 as planned because the secondary CPU is parked to the bootrom code. We can't configure it in the bootloader. So we must enable invalidates of BTB for omap5 and dra7 secondary core in the kernel. And there's a fix for reserved register access for am3517. The usb otg module on am3517 is not the same as for other omap3. * tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebu由 Olof Johansson 提交于
mvebu fixes for 4.18 (part 1) Use the new thermal binding on Armada 38x allowing to use a driver fix which is already part of the kernel. * tag 'mvebu-fixes-4.18-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: use the new thermal binding Signed-off-by: NOlof Johansson <olof@lixom.net>
-
https://github.com/rjarzmik/linux由 Olof Johansson 提交于
This is the fixes set for v4.18 cycle. This is a fix for suspending all pxa3xx platforms, where high number interrupts are not reenabled. * tag 'pxa-fixes-4.18' of https://github.com/rjarzmik/linux: ARM: pxa: irq: fix handling of ICMR registers in suspend/resume Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: "Two related fixes for a boot failure of Xen PV guests" * tag 'for-linus-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: setup pv irq ops vector earlier xen: remove global bit from __default_kernel_pte_mask for pv guests
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fix from Jens Axboe: "Just a single regression fix (from 4.17) for bsg, fixing an EINVAL return on non-data commands" * tag 'for-linus-20180713' of git://git.kernel.dk/linux-block: bsg: fix bogus EINVAL on non-data commands
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "11 fixes" * emailed patches form Andrew Morton <akpm@linux-foundation.org>: reiserfs: fix buffer overflow with long warning messages checkpatch: fix duplicate invalid vsprintf pointer extension '%p<foo>' messages mm: do not bug_on on incorrect length in __mm_populate() mm/memblock.c: do not complain about top-down allocations for !MEMORY_HOTREMOVE fs, elf: make sure to page align bss in load_elf_library x86/purgatory: add missing FORCE to Makefile target net/9p/client.c: put refcount of trans_mod in error case in parse_opts() mm: allow arch to supply p??_free_tlb functions autofs: fix slab out of bounds read in getname_kernel() fs/proc/task_mmu.c: fix Locked field in /proc/pid/smaps* mm: do not drop unused pages when userfaultd is running
-
由 Eric Biggers 提交于
ReiserFS prepares log messages into a 1024-byte buffer with no bounds checks. Long messages, such as the "unknown mount option" warning when userspace passes a crafted mount options string, overflow this buffer. This causes KASAN to report a global-out-of-bounds write. Fix it by truncating messages to the buffer size. Link: http://lkml.kernel.org/r/20180707203621.30922-1-ebiggers3@gmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+b890b3335a4d8c608963@syzkaller.appspotmail.com Signed-off-by: NEric Biggers <ebiggers@google.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Multiline statements with invalid %p<foo> uses produce multiple warnings. Fix that. e.g.: $ cat t_block.c void foo(void) { MY_DEBUG(drv->foo, "%pk", foo->boo); } $ ./scripts/checkpatch.pl -f t_block.c WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 #1: FILE: t_block.c:1: +void foo(void) WARNING: Invalid vsprintf pointer extension '%pk' #3: FILE: t_block.c:3: + MY_DEBUG(drv->foo, + "%pk", + foo->boo); WARNING: Invalid vsprintf pointer extension '%pk' #3: FILE: t_block.c:3: + MY_DEBUG(drv->foo, + "%pk", + foo->boo); total: 0 errors, 3 warnings, 6 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. t_block.c has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Link: http://lkml.kernel.org/r/9e8341bbe4c9877d159cb512bb701043cbfbb10b.camel@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Cc: "Tobin C. Harding" <me@tobin.cc> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
syzbot has noticed that a specially crafted library can easily hit VM_BUG_ON in __mm_populate kernel BUG at mm/gup.c:1242! invalid opcode: 0000 [#1] SMP CPU: 2 PID: 9667 Comm: a.out Not tainted 4.18.0-rc3 #644 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 RIP: 0010:__mm_populate+0x1e2/0x1f0 Code: 55 d0 65 48 33 14 25 28 00 00 00 89 d8 75 21 48 83 c4 20 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 75 18 f1 ff 0f 0b e8 6e 18 f1 ff <0f> 0b 31 db eb c9 e8 93 06 e0 ff 0f 1f 00 55 48 89 e5 53 48 89 fb Call Trace: vm_brk_flags+0xc3/0x100 vm_brk+0x1f/0x30 load_elf_library+0x281/0x2e0 __ia32_sys_uselib+0x170/0x1e0 do_fast_syscall_32+0xca/0x420 entry_SYSENTER_compat+0x70/0x7f The reason is that the length of the new brk is not page aligned when we try to populate the it. There is no reason to bug on that though. do_brk_flags already aligns the length properly so the mapping is expanded as it should. All we need is to tell mm_populate about it. Besides that there is absolutely no reason to to bug_on in the first place. The worst thing that could happen is that the last page wouldn't get populated and that is far from putting system into an inconsistent state. Fix the issue by moving the length sanitization code from do_brk_flags up to vm_brk_flags. The only other caller of do_brk_flags is brk syscall entry and it makes sure to provide the proper length so t here is no need for sanitation and so we can use do_brk_flags without it. Also remove the bogus BUG_ONs. [osalvador@techadventures.net: fix up vm_brk_flags s@request@len@] Link: http://lkml.kernel.org/r/20180706090217.GI32658@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Reported-by: Nsyzbot <syzbot+5dcb560fe12aa5091c06@syzkaller.appspotmail.com> Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: NOscar Salvador <osalvador@suse.de> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Mike Rapoport is converting architectures from bootmem to nobootmem allocator. While doing so for m68k Geert has noticed that he gets a scary looking warning: WARNING: CPU: 0 PID: 0 at mm/memblock.c:230 memblock_find_in_range_node+0x11c/0x1be memblock: bottom-up allocation failed, memory hotunplug may be affected Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.18.0-rc3-atari-01343-gf2fb5f2e09a97a3c-dirty #7 Call Trace: __warn+0xa8/0xc2 kernel_pg_dir+0x0/0x1000 netdev_lower_get_next+0x2/0x22 warn_slowpath_fmt+0x2e/0x36 memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x0/0x1be vprintk_func+0x66/0x6e memblock_virt_alloc_internal+0xd0/0x156 netdev_lower_get_next+0x2/0x22 netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 memblock_virt_alloc_try_nid_nopanic+0x58/0x7a netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 kernel_pg_dir+0x0/0x1000 EXPTBL+0x234/0x400 EXPTBL+0x234/0x400 alloc_node_mem_map+0x4a/0x66 netdev_lower_get_next+0x2/0x22 free_area_init_node+0xe2/0x29e EXPTBL+0x234/0x400 paging_init+0x430/0x462 kernel_pg_dir+0x0/0x1000 printk+0x0/0x1a EXPTBL+0x234/0x400 setup_arch+0x1b8/0x22c start_kernel+0x4a/0x40a _sinittext+0x344/0x9e8 The warning is basically saying that a top-down allocation can break memory hotremove because memblock allocation is not movable. But m68k doesn't even support MEMORY_HOTREMOVE so there is no point to warn about it. Make the warning conditional only to configurations that care. Link: http://lkml.kernel.org/r/20180706061750.GH32658@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Sam Creasey <sammy@sammy.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oscar Salvador 提交于
The current code does not make sure to page align bss before calling vm_brk(), and this can lead to a VM_BUG_ON() in __mm_populate() due to the requested lenght not being correctly aligned. Let us make sure to align it properly. Kees: only applicable to CONFIG_USELIB kernels: 32-bit and configured for libc5. Link: http://lkml.kernel.org/r/20180705145539.9627-1-osalvador@techadventures.netSigned-off-by: NOscar Salvador <osalvador@suse.de> Reported-by: syzbot+5dcb560fe12aa5091c06@syzkaller.appspotmail.com Tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by: NKees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Philipp Rudo 提交于
- Build the kernel without the fix - Add some flag to the purgatories KBUILD_CFLAGS,I used -fno-asynchronous-unwind-tables - Re-build the kernel When you look at makes output you see that sha256.o is not re-build in the last step. Also readelf -S still shows the .eh_frame section for sha256.o. With the fix sha256.o is rebuilt in the last step. Without FORCE make does not detect changes only made to the command line options. So object files might not be re-built even when they should be. Fix this by adding FORCE where it is missing. Link: http://lkml.kernel.org/r/20180704110044.29279-2-prudo@linux.ibm.com Fixes: df6f2801 ("kernel/kexec_file.c: move purgatories sha256 to common code") Signed-off-by: NPhilipp Rudo <prudo@linux.ibm.com> Acked-by: NDave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 piaojun 提交于
In my testing, the second mount will fail after umounting successfully. The reason is that we put refcount of trans_mod in the correct case rather than the error case in parse_opts() at last. That will cause the refcount decrease to -1, and when we try to get trans_mod again in try_module_get(), we could only increase refcount to 0 which will cause failure as follows: parse_opts v9fs_get_trans_by_name try_module_get : return NULL to caller which cause error So we should put refcount of trans_mod in error case. Link: http://lkml.kernel.org/r/5B3F39A0.2030509@huawei.com Fixes: 9421c3e6 ("net/9p/client.c: fix potential refcnt problem of trans module") Signed-off-by: NJun Piao <piaojun@huawei.com> Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: NGreg Kurz <groug@kaod.org> Reviewed-by: NDominique Martinet <dominique.martinet@cea.fr> Tested-by: NDominique Martinet <dominique.martinet@cea.fr> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicholas Piggin 提交于
The mmu_gather APIs keep track of the invalidated address range including the span covered by invalidated page table pages. Ranges covered by page tables but not ptes (and therefore no TLBs) still need to be invalidated because some architectures (x86) can cache intermediate page table entries, and invalidate those with normal TLB invalidation instructions to be almost-backward-compatible. Architectures which don't cache intermediate page table entries, or which invalidate these caches separately from TLB invalidation, do not require TLB invalidation range expanded over page tables. Allow architectures to supply their own p??_free_tlb functions, which can avoid the __tlb_adjust_range. Link: http://lkml.kernel.org/r/20180703013131.2807-1-npiggin@gmail.comSigned-off-by: NNicholas Piggin <npiggin@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: "Aneesh Kumar K. V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tomas Bortoli 提交于
The autofs subsystem does not check that the "path" parameter is present for all cases where it is required when it is passed in via the "param" struct. In particular it isn't checked for the AUTOFS_DEV_IOCTL_OPENMOUNT_CMD ioctl command. To solve it, modify validate_dev_ioctl(function to check that a path has been provided for ioctl commands that require it. Link: http://lkml.kernel.org/r/153060031527.26631.18306637892746301555.stgit@pluto.themaw.netSigned-off-by: NTomas Bortoli <tomasbortoli@gmail.com> Signed-off-by: NIan Kent <raven@themaw.net> Reported-by: syzbot+60c837b428dc84e83a93@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Thomas reports: "While looking around in /proc on my v4.14.52 system I noticed that all processes got a lot of "Locked" memory in /proc/*/smaps. A lot more memory than a regular user can usually lock with mlock(). Commit 493b0e9d (in v4.14-rc1) seems to have changed the behavior of "Locked". Before that commit the code was like this. Notice the VM_LOCKED check. (vma->vm_flags & VM_LOCKED) ? (unsigned long)(mss.pss >> (10 + PSS_SHIFT)) : 0); After that commit Locked is now the same as Pss: (unsigned long)(mss->pss >> (10 + PSS_SHIFT))); This looks like a mistake." Indeed, the commit has added mss->pss_locked with the correct value that depends on VM_LOCKED, but forgot to actually use it. Fix it. Link: http://lkml.kernel.org/r/ebf6c7fb-fec3-6a26-544f-710ed193c154@suse.cz Fixes: 493b0e9d ("mm: add /proc/pid/smaps_rollup") Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Reported-by: NThomas Lindroth <thomas.lindroth@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Colascione <dancol@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian Borntraeger 提交于
KVM guests on s390 can notify the host of unused pages. This can result in pte_unused callbacks to be true for KVM guest memory. If a page is unused (checked with pte_unused) we might drop this page instead of paging it. This can have side-effects on userfaultd, when the page in question was already migrated: The next access of that page will trigger a fault and a user fault instead of faulting in a new and empty zero page. As QEMU does not expect a userfault on an already migrated page this migration will fail. The most straightforward solution is to ignore the pte_unused hint if a userfault context is active for this VMA. Link: http://lkml.kernel.org/r/20180703171854.63981-1-borntraeger@de.ibm.comSigned-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Tatashin 提交于
We must zero struct pages for memory that is not backed by physical memory, or kernel does not have access to. Recently, there was a change which zeroed all memmap for all holes in e820. Unfortunately, it introduced a bug that is discussed here: https://www.spinics.net/lists/linux-mm/msg156764.html Linus, also saw this bug on his machine, and confirmed that reverting commit 124049de ("x86/e820: put !E820_TYPE_RAM regions into memblock.reserved") fixes the issue. The problem is that we incorrectly zero some struct pages after they were setup. The fix is to zero unavailable struct pages prior to initializing of struct pages. A more detailed fix should come later that would avoid double zeroing cases: one in __init_single_page(), the other one in zero_resv_unavail(). Fixes: 124049de ("x86/e820: put !E820_TYPE_RAM regions into memblock.reserved") Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 7月, 2018 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: - I2C core bugfix regarding bus recovery - driver bugfix for the tegra driver - typo correction * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: recovery: if possible send STOP with recovery pulses i2c: tegra: Fix NACK error handling i2c: stu300: use non-archaic spelling of failes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Ingo Molnar: "A clocksource driver fix and a revert" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_mask Revert "tick: Prefer a lower rating device only if it's CPU local device"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf tool fixes from Ingo Molnar: "Misc tooling fixes: python3 related fixes, gcc8 fix, bashism fixes and some other smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Use python-config --includes rather than --cflags perf script python: Fix dict reference counting perf stat: Fix --interval_clear option perf tools: Fix compilation errors on gcc8 perf test shell: Prevent temporary editor files from being considered test scripts perf llvm-utils: Remove bashism from kernel include fetch script perf test shell: Make perf's inet_pton test more portable perf test shell: Replace '|&' with '2>&1 |' to work with more shells perf scripts python: Add Python 3 support to EventClass.py perf scripts python: Add Python 3 support to sched-migration.py perf scripts python: Add Python 3 support to Util.py perf scripts python: Add Python 3 support to SchedGui.py perf scripts python: Add Python 3 support to Core.py perf tools: Generate a Python script compatible with Python 2 and 3
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI fix from Ingo Molnar: "Fix a UEFI mixed mode (64-bit kernel on 32-bit UEFI) reboot loop regression" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix mixed mode reboot loop by removing pointless call to PciIo->Attributes()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull rseq fixes from Ingo Molnar: "Various rseq ABI fixes and cleanups: use get_user()/put_user(), validate parameters and use proper uapi types, etc" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: cleanup: Update comment above rseq_prepare_unload rseq: Remove unused types_32_64.h uapi header rseq: uapi: Declare rseq_cs field as union, update includes rseq: uapi: Update uapi comments rseq: Use get_user/put_user rather than __get_user/__put_user rseq: Use __u64 for rseq_cs fields, validate user inputs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Jason Gunthorpe: "Things have been quite slow, only 6 RC patches have been sent to the list. Regression, user visible bugs, and crashing fixes: - cxgb4 could wrongly fail MR creation due to a typo - various crashes if the wrong QP type is mixed in with APIs that expect other types - syzkaller oops - using ERR_PTR and NULL together cases HFI1 to crash in some cases - mlx5 memory leak in error unwind" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix memory leak in mlx5_ib_create_srq() error path RDMA/uverbs: Don't fail in creation of multiple flows IB/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values RDMA/uverbs: Fix slab-out-of-bounds in ib_uverbs_ex_create_flow RDMA/uverbs: Protect from attempts to create flows on unsupported QP iw_cxgb4: correctly enforce the max reg_mr depth
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fix from Alex Williamson: "Fix deadlock in mbochs sample driver (Alexey Khoroshilov)" * tag 'vfio-v4.18-rc5' of git://github.com/awilliam/linux-vfio: sample: vfio-mdev: avoid deadlock in mdev_access()
-
由 Linus Torvalds 提交于
Merge tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - update Kbuild and Kconfig documents - sanitize -I compiler option handling - update extract-vmlinux script to recognize LZ4 and ZSTD - fix tools Makefiles - update tags.sh to handle __ro_after_init - suppress warnings in case getconf does not recognize LFS_* parameters * tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: suppress warnings from 'getconf LFS_*' scripts/tags.sh: add __ro_after_init tools: build: Use HOSTLDFLAGS with fixdep tools: build: Fixup host c flags tools build: fix # escaping in .cmd files for future Make scripts: teach extract-vmlinux about LZ4 and ZSTD kbuild: remove duplicated comments about PHONY kbuild: .PHONY is not a variable, but PHONY is kbuild: do not drop -I without parameter kbuild: document the KBUILD_KCONFIG env. variable kconfig: update user kconfig tools doc. kbuild: delete INSTALL_FW_PATH from kbuild documentation kbuild: update ARCH alias info for sparc kbuild: update ARCH alias info for sh
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "Catalin's out enjoying the sunshine, so I'm sending the fixes for a couple of weeks (although there hopefully won't be any more!). We've got a revert of a previous fix because it broke the build with some distro toolchains and a preemption fix when detemining whether or not the SIMD unit is in use. Summary: - Revert back to the 'linux' target for LD, as 'elf' breaks some distributions - Fix preemption race when testing whether the vector unit is in use or not" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: neon: Fix function may_use_simd() return error status Revert "arm64: Use aarch64elf and aarch64elfb emulation mode variants"
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A couple of small fixes this time around from Steven for an interaction between ftrace and kernel read-only protection, and Vladimir for nommu" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8780/1: ftrace: Only set kernel memory back to read-only after boot ARM: 8775/1: NOMMU: Use instr_sync instead of plain isb in common code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixlet from Steven Rostedt: "Joel Fernandes asked to add a feature in tracing that Android had its own patch internally for. I took it back in 4.13. Now he realizes that he had a mistake, and swapped the values from what Android had. This means that the old Android tools will break when using a new kernel that has the new feature on it. The options are: 1. To swap it back to what Android wants. 2. Add a command line option or something to do the swap 3. Just let Android carry a patch that swaps it back Since it requires setting a tracing option to enable this anyway, I doubt there are other users of this than Android. Thus, I've decided to take option 1. If someone else is actually depending on the order that is in the kernel, then we will have to revert this change and go to option 2 or 3" * tag 'trace-v4.18-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Reorder display of TGID to be after PID
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Just a few HD-auio fixes: one fix for a possible mutex deadlock at HDMI hotplug handling is somewhat subtle and delicate, while the rest are usual device-specific quirks" * tag 'sound-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/ca0132: Update a pci quirk device name ALSA: hda/ca0132: Add Recon3Di quirk for Gigabyte G1.Sniper Z97 ALSA: hda/realtek - two more lenovo models need fixup of MIC_LOCATION ALSA: hda - Handle pm failure during hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dave Jiang: - ensure that a variable passed in by reference to acpi_nfit_ctl is always set to a value. An incremental patch is provided due to notice from testing in -next. The rest of the commits did not exhibit issues. - fix a return path in nsio_rw_bytes() that was not returning "bytes remain" as expected for the function. - address an issue where applications polling on scrub-completion for the NVDIMM may falsely wakeup and read the wrong state value and cause hang. - change the test unit persistent capability attribute to fix up a broken assumption in the unit test infrastructure wrt the 'write_cache' attribute - ratelimit dev_info() in the dax device check_vma() function since this is easily triggered from userspace * tag 'libnvdimm-fixes-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: fix unchecked dereference in acpi_nfit_ctl acpi, nfit: Fix scrub idle detection tools/testing/nvdimm: advertise a write cache for nfit_test acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value dev-dax: check_vma: ratelimit dev_info-s libnvdimm, pmem: Fix memcpy_mcsafe() return code handling in nsio_rw_bytes()
-
- 13 7月, 2018 5 次提交
-
-
由 Alexandre Belloni 提交于
The offset needs to be added after reading the alarm value. It also needs to be subtracted after the now < alarm test. Tested-by: NJon Hunter <jonathanh@nvidia.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
-
由 Juergen Gross 提交于
Setting pv_irq_ops for Xen PV domains should be done as early as possible in order to support e.g. very early printk() usage. The same applies to xen_vcpu_info_reset(0), as it is needed for the pv irq ops. Move the call of xen_setup_machphys_mapping() after initializing the pv functions as it contains a WARN_ON(), too. Remove the no longer necessary conditional in xen_init_irq_ops() from PVH V1 times to make clear this is a PV only function. Cc: <stable@vger.kernel.org> # 4.14 Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Joel Fernandes (Google) 提交于
Currently ftrace displays data in trace output like so: _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID CPU TGID |||| TIMESTAMP FUNCTION | | | | |||| | | bash-1091 [000] ( 1091) d..2 28.313544: sched_switch: However Android's trace visualization tools expect a slightly different format due to an out-of-tree patch patch that was been carried for a decade, notice that the TGID and CPU fields are reversed: _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID TGID CPU |||| TIMESTAMP FUNCTION | | | | |||| | | bash-1091 ( 1091) [002] d..2 64.965177: sched_switch: From kernel v4.13 onwards, during which TGID was introduced, tracing with systrace on all Android kernels will break (most Android kernels have been on 4.9 with Android patches, so this issues hasn't been seen yet). From v4.13 onwards things will break. The chrome browser's tracing tools also embed the systrace viewer which uses the legacy TGID format and updates to that are known to be difficult to make. Considering this, I suggest we make this change to the upstream kernel and backport it to all Android kernels. I believe this feature is merged recently enough into the upstream kernel that it shouldn't be a problem. Also logically, IMO it makes more sense to group the TGID with the TASK-PID and the CPU after these. Link: http://lkml.kernel.org/r/20180626000822.113931-1-joel@joelfernandes.org Cc: jreck@google.com Cc: tkjos@google.com Cc: stable@vger.kernel.org Fixes: 441dae8f ("tracing: Add support for display of tgid in trace output") Signed-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Wolfram Sang 提交于
I2C clients may misunderstand recovery pulses if they can't read SDA to bail out early. In the worst case, as a write operation. To avoid that and if we can write SDA, try to send STOP to avoid the misinterpretation. Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: NPeter Rosin <peda@axentia.se> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fix from Boris Brezillon: "A SPI NOR fix to fix a timeout in the cadence QSPI controller driver" * tag 'mtd/fixes-for-4.18-rc5' of git://git.infradead.org/linux-mtd: mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts
-