- 30 5月, 2009 1 次提交
-
-
由 Hartley Sweeten 提交于
Fix trivial spelling error in arch/arm/mach-ep93xx/core.c Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 5月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
Add power management support to the VIC by registering each VIC as a system device to get suspend/resume events going. Since the VIC registeration is done early, we need to record the VICs in a static array which is used to add the system devices later once the initcalls are run. This means there is now a configuration value for the number of VICs in the system. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 26 4月, 2009 1 次提交
-
-
由 Hartley Sweeten 提交于
Update the rtc-ep93xx driver to use ioremap'ed addresses. This removes the dependency on <mach/hardware.h> and properly reports the memory addresses used by the driver in /proc/iomem. In addition, ep93xx_rtc_init() is updated to use platform_driver_probe() instead of platform_driver_register(). Also, the device_create_file() calls are now properly checked for error conditions. The created sysfs files are also now removed when the driver is removed. The version number for the driver has been bumped at the request of Alessandro Zummo. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 4月, 2009 1 次提交
-
-
由 Hartley Sweeten 提交于
Fix trivial build warning due to incompatible pointer type. ep93xx_timer_interrupt() has the wrong return type causing a warning during the build. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 1月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 02 12月, 2008 2 次提交
-
-
由 Hartley Sweeten 提交于
Add debounce support for ep93xx gpio interrupts. On the EP93xx, GPIO ports A, B, and F can be used to generate interrupts. For each port, if interrupts are enabled, it is possible to debouce the input signal. Debouncing is implemented by passing the input signal through a 2-bit shift register clocked by a 128Hz clock. This patch adds a platform specific way to enable the debouce feature for these input ports. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hartley Sweeten 提交于
Allow the ep93xx platform init code to register the built-in i2c bus. The EP93xx processor has two GPIO pins dedicated for an I2C bus. This patch registers the platform supplied i2c_board_info and the necessary platform_device information for the i2c-gpio driver to use these pins. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NRyan Mallon <ryan@bluewatersys.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 10月, 2008 1 次提交
-
-
由 Matthias Kaehlcke 提交于
Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 10月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
desc_handle_irq() was declared as obsolete since long ago. Replace it with generic_handle_irq() Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 10月, 2008 1 次提交
-
-
由 Hartley Sweeten 提交于
All EP93xx based systems can support Ethernet. This patch moves the platform_device setup from the various board support files into the core support file. The Ethernet driver data still remains in the individual platform setup files to allow specific platform configuration. This also adds Ethernet support to the edb9302, edb9312, and edb9315 platforms. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 9月, 2008 1 次提交
-
-
由 Hartley Sweeten 提交于
The GPIO port F enable register offset points to the wrong register, 0x5c is the IntStsF register. The correct offset is 0x58. This patch corrects it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 06 9月, 2008 1 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 7月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 04 5月, 2008 1 次提交
-
-
由 Ryan Mallon 提交于
Change gpio_direction_output to gpio_direction_input in ep93xx_gpio_irq_type. Fixes broken gpio interrupts. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 4月, 2008 1 次提交
-
-
由 Ryan Mallon 提交于
Adds support for the generic GPIO lib to the EP93xx family. The gpio handling code has been moved from core.c to a new file called gpio.c. The GPIO based IRQ code has not been changed. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 1月, 2008 1 次提交
-
-
由 Russell King 提交于
Move the xtime write mode seqlock into timer_tick(), so it only surrounds the call to do_timer(). This avoids a deadlock in update_process_times() ... hrtimer_get_softirq_time() which tries to get a read mode seqlock on xtime, thereby preventing booting. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 1月, 2008 5 次提交
-
-
由 Lucas Woods 提交于
Signed-off-by: NLucas Woods <woodzy@gmail.com> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Herbert Valerio Riedel 提交于
With the new GPIO methods in place the old gpio_line_* methods are redundant, so this patch finally removes the old legacy gpio_line_* wrappers. Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Herbert Valerio Riedel 提交于
Having a both-edge sensitive irq trigger type is required for the generic gpio-keys input driver; alas the ep93xx does not support both-edge gpio triggers in hardware, so this patch implements them by switching edge polarity on each triggered interrupt. This is the same approach as taken by the Orion SoC both-edge gpio irq support implementation. Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Herbert Valerio Riedel 提交于
This patch renumbers the (virtual) GPIO line numbering to have all irq-capable gpio lines <= EP93XX_GPIO_LINE_MAX_IRQ by swapping the port f range with the port c range; This simplifies code such as #define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f)) or if (line >= 0 && line < 16) { /* Port A/B */ } else if (line >= 40 && line < 48) { /* Port F */ } considerably; in addition to the renumbering this patch also introduces macro constants EP93XX_GPIO_LINE_MAX_IRQ and EP93XX_GPIO_LINE_MAX, and replaces most magic numbers by those and invocations of gpio_to_irq()/irq_to_gpio(). Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Herbert Valerio Riedel 提交于
Implement new GPIO API for ep93xx platform as defined in Documentation/gpio.txt and provide transitional __deprecated wrappers for the previous gpio_line_* functions. Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 20 9月, 2007 1 次提交
-
-
由 Herbert Valerio Riedel 提交于
The EP93XX_GPIO_LINE_F() macro is supposed to be called with a line number between 0 and 7, but the current code causes it to get called with an spuriously offset number range {16..23}. Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Signed-off-by: NLennert Buytenhek <kernel@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 5月, 2007 1 次提交
-
-
由 Bernhard Walle 提交于
Add IRQF_IRQPOLL for each timer interrupt. Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2007 4 次提交
-
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Move the setting of HWCAP_CRUNCH to kernel/crunch.c, where it belongs. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 12月, 2006 1 次提交
-
-
由 Lennert Buytenhek 提交于
Add HWCAP_CRUNCH so that the dynamic linker knows whether it can use Crunch-optimised libraries or not. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 11月, 2006 1 次提交
-
-
由 Russell King 提交于
set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 10月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 24 6月, 2006 2 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek The ep93xx ohci bits have been merged into the gregkh-2.6 tree, which means that they will probably go upstream soon, so make the core ep93xx code instantiate an appropriate ep93xx-ohci platform device. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add an initial implementation of the clk_* API for the cirrus ep93xx to the tree. The initial implementation is somewhat minimal, with the intention of extending it as we go along. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 6月, 2006 2 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek The tick rate of timers 1-3 isn't exactly 508 kHz as some parts of the relevant documentation claim, but more like 508.469 kHz (14.7456 MHz divided by 29.) Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek A couple of platforms aren't using the right comparison type in their timer interrupt handlers (as we're comparing two wrapping timestamps, we need a bmi/bpl-type comparison, not an unsigned comparison) -- this patch fixes them up. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 4月, 2006 1 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Instantiate the recently merged ep93xx rtc driver in the ep93xx code. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 3月, 2006 1 次提交
-
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-