- 11 7月, 2009 40 次提交
-
-
由 Tomas Winkler 提交于
This patch unifies setup_rxon_timing funcions of AGN and 3945. HWs differ only in supported maximal beacon interval. This is reflected in hw_paras.max_beacon_itrvl Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When userspace requests only certain channels to be scanned, we currently ignore that request entirely. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
There really is no reason to be assigning txq->swq_id all the time, once at aggregation setup is sufficient. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
Each HW supported by iwlwifi is capable of hardware crypto so drop this flag from hw_params structure. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
Hardware may be ready for us to manage it without us trying to prepare it first. Check if this is the case. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We were not differentiating quality between legacy and HT configurations. We change this to consider the differences. New theory for reporting quality: At a hardware RSSI of 45 you will be able to use MCS 7 reliably. At a hardware RSSI of 45 you will be able to use MCS 15 reliably. At a hardware RSSI of 35 you should be able use 54 Mbps reliably. MCS 7 is the highets MCS index usable by a 1-stream device. MCS 15 is the highest MCS index usable by a 2-stream device. All ath9k devices are either 1-stream or 2-stream. How many bars you see is derived from the qual reporting. A more elaborate scheme can be used here but it requires tables of SNR/throughput for each possible mode used. For the MCS table you can refer to the wireless wiki: http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n This should fix this bug report: http://bugzilla.kernel.org/show_bug.cgi?id=13537 Cc: Janath.Peiris@atheros.com Cc: Matt.Smith@atheros.com Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Yurovsky 提交于
The SDIO driver sets the surpriseremoved flag before calling lbs_remove_card. With IEEE PS enabled, lbs_remove_card must issue a command to exit IEEE PS mode, however with that flag set the command path is blocked and the card is never taken out of IEEE PS mode. This step is required to ensure that the driver can be reloaded. This patch moves the setting of surpriseremoved after lbs_remove_card is called. Tested with V9 firmware by ensuring that IEEE PS is disabled when the driver is removed. Reloading the driver is not fully tested due to a separate issue with module reload in the SDIO driver, however this patch at least leaves the card in a better state when we bring the driver down. Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Yurovsky 提交于
The SPI driver does a couple of card cleanup steps in the wrong order on module removal. If IEEE PS is enabled, this results in the card being left in IEEE PS mode and subsequent failures to reload the module. The problem is that the surpriseremoved flag is set before calling lbs_remove_card, but that function needs to issue a command to exit IEEE PS mode (the flag blocks the command path). In addition, lbs_stop_card should be called first because it clears out any pending commands. Tested on a GSPI device with V9 firmware by confirming that we can reload the module with or without IEEE PS enabled. Also fix a warning from the wrong uint format in a printk. V2: use z modifier, thanks Sebastian. Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Yurovsky 提交于
Libertas currently maintains a copy of the WPA unicast and group keys when using WPA or WPA2. This copy is checked when deciding whether or not to return to sleep in IEEE PS mode but the actual copying back to priv was omitted, which breaks IEEE PS mode with WPA/WPA2 when one issues commands that require temporarily keeping the device awake. This patch introduces the omitted copy-back of the keys so that IEEE PS functions correctly in WPA/WPA2 mode. Thanks to Dan Williams for clearing up the issue. V2: fix typo. Also, this has been tested on GSPI and SDIO with V9 firmware. Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
"cfg80211: Advertise ciphers via WE according to driver capability" unfortunately broke iwrange -- it used the variable c that needs to be 0 for the channel list. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
In this case, only one cipher makes sense, unlike for connect() where it may be possible to have the card or driver select. No changes to mac80211 due to the way the structs are laid out -- but the loop in net/mac80211/cfg.c will degrade to just zero or one passes. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
This addresses the following compile warnings on 64-bit platforms. drivers/net/wireless/orinoco/scan.c: In function 'orinoco_add_hostscan_results': drivers/net/wireless/orinoco/scan.c:194: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/net/wireless/orinoco/scan.c:211: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/net/wireless/orinoco/scan.c:211: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
It is possible that there are different BSS structs with the same BSSID, but we cannot authenticate with multiple of them them because we need the BSSID to be unique for deauthenticating/disassociating. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This function from mac80211 seems generally useful, and I will need it in cfg80211 soon. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When the interface is brought down, we need to reset the auth algorithm because wpa_supplicant doesn't reset it, and then we fail to use shared key auth when required later. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When the userspace SME is in control, we are currently not sending events, but this means that any userspace applications using wext or nl80211 to receive events will not know what's going on unless they can also interpret the nl80211 assoc event. Since we have all the required code, let the SME follow events from the userspace SME, this even means that you will be refused to connect() while the userspace SME is in control and connected. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
With mac80211 now always controlled by an external SME, a lot of code is dead -- SSID, BSSID, channel selection is always done externally, etc. Additionally, rename IEEE80211_STA_TKIP_WEP_USED to IEEE80211_STA_DISABLE_11N and clean up the code a bit. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The automatic auth algorithm issue is now solved in cfg80211, so mac80211 no longer needs code to try different algorithms -- just using whatever cfg80211 asked for is good. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The IEEE80211_STA_TKIP_WEP_USED flag is used internally to disable HT when WEP or TKIP are used. Now that cfg80211 is giving us the required information, we can set the flag appropriately again. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
By dropping the noise reporting, we can implement wireless stats in cfg80211. We also make the handler return NULL if we have no information, which is possible thanks to the recent wext change. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
For now, let's implement that using a very hackish way: simply mirror the wext API in the cfg80211 API. This will have to be changed later when we implement proper bitrate API. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This implements siocsiwap/giwap for WDS mode. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Just on/off and timeout, and with a hacky cfg80211 method until we figure out what we want, though this is probably sufficient as we want to use pm_qos for wifi everywhere. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This adds code to make it possible to use the cfg80211 connect() API with wireless extensions, and because the previous patch added emulation of that API with auth() and assoc(), by extension also supports wext on that. At the same time, removes code from mac80211 for wext, but doesn't yet clean up mac80211's mlme code more. Signed-off-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This adds code to cfg80211 so that drivers (mac80211 right now) that don't implement connect but rather auth/assoc can still be used with the nl80211 connect command. This will also be necessary for the wext compat code. Signed-off-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Samuel Ortiz 提交于
This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
We'll need these values for some drivers using connect API and for wext compat code, so let's define them. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The ieee80211_scan_results function hasn't existed for a long time now, so its declaration should be removed as well. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This introduces a new NL80211_CMD_TESTMODE for testing and calibration use with nl80211. There's no multiplexing like like iwpriv had, and the command is not available by default, it needs to be explicitly enabled in Kconfig and shouldn't be enabled in most kernels. The command requires a wiphy index or interface index to identify the device to operate on, and the new TESTDATA attribute. There also is API for sending replies to the command, and testmode multicast messages (on a testmode multicast group). I've also updated mac80211 to be able to pass through the command to the driver, since it itself doesn't implement the testmode command. Additionally, to give people an idea of how to use the command, I've added a little code to hwsim that makes use of the new command to set the powersave mode, this is currently done via debugfs and should remain there, and the testmode command only serves as an example of how to use this best -- with nested netlink attributes in the TESTDATA attribute. A hwsim testmode tool can be found at http://git.sipsolutions.net/hwsim.git/. This tool is BSD licensed so people can easily use it as a basis for their own internal fabrication and validation tools. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This is never changed by the function, so can be marked const. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When the auth algorithm is rejected, but we don't have another one to try, we will eventually retry but that isn't useful -- we'll then do it again and again until we eventually give up. Instead, we should let the SME know and go into disabled state. The same applies for situations where the AP rejects with any other status code. Additionally, when trying the next auth algorithm, we should reset the auth_tries so that just a single lost frame doesn't lead to us giving up on the third auth algorithm. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This variable isn't necessary -- the wext code keeps track of the BSSID itself, and otherwise we have current_bss. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Move a break statement to the correct place _after_ the #endif, otherwise w/o WIRELESS_EXT things break badly. Also, while touching this code, do a cleanup and assign dev->ieee80211_ptr to a new variable. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The way I initially thought we could do wireless extensions is by making all the compat code in cfg80211 be independent of CONFIG_WIRELESS_EXT, but this is turning out to not be feasible. Therefore, fix the Kconfig help text and make the option default to yes, so people won't get a nasty surprise when mac80211 will get rid of its 'select WIRELESS_EXT' any time now. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The key todo lock can be taken from different locks that require it to be _bh to avoid lock inversion due to (soft)irqs. This should fix the two problems reported by Bob and Gabor: http://mid.gmane.org/20090619113049.GB18956@hash.localnet http://mid.gmane.org/4A3FA376.8020307@openwrt.orgSigned-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Bob Copeland <me@bobcopeland.com> Cc: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Currently, wext drivers cannot return NULL for stats even though that would make the ioctl return -EOPNOTSUPP because that would mean they are no longer listed in /proc/net/wireless. This patch changes the wext core's behaviour to list them if they have any wireless_handlers, but only show their stats when available, so that drivers can start returning NULL if stats are currently not available, reducing confusion for e.g. IBSS. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-