- 28 3月, 2018 16 次提交
-
-
由 Tariq Toukan 提交于
Do not implicit a call to mlx5e_init_rq_type_params() upon every change in RQ type. It should be called only on channels creation. Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Tariq Toukan 提交于
It can be derived from other params, calculate it via the dedicated function when needed. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Tariq Toukan 提交于
Introduce functions to calculate them when needed. They can be derived from other params. This will simplify transition between RQ configurations. In general, any parameter that is not explicitly set or controlled, but derived from other parameters, should not have a control-path field itself, but a getter function. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Tariq Toukan 提交于
In copying skb header to skb->data, replace the call to skb_copy_to_linear_data_offset() with a zero offset with the call to the no-offset function skb_copy_to_linear_data(). Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Tariq Toukan 提交于
Pass the base dma address and offset to dma_sync_single_range_for_cpu(), instead of doing the pre-calculation. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Tariq Toukan 提交于
Clean it up as it's not in use. Fixes: d9d9f156 ("net/mlx5e: Expand WQE stride when CQE compression is enabled") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Tariq Toukan 提交于
We turn the feature off for servers with PCI BW bounded by a threshold (16G) and lower than MAX LINK BW. This improves the effectiveness of CQE compression feature, that is defaulted to ON for the same case. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Tariq Toukan 提交于
Get the link/pci speed query and logic into a single function. Unify the heuristics and use a single PCI threshold (16G) for all. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Edward Cree 提交于
The FLOW_RSS flag was causing us to insert UDP filters when TCP was wanted. Fixes: 42356d9a ("sfc: support RSS spreading of ethtool ntuple filters") Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Otherwise races are possible between ethtool ops and efx_ef10_rx_restore_rss_contexts(). Also, don't try to perform the restore on every reset, only after an MC reboot, otherwise we'll leak RSS contexts on the NIC. Fixes: 42356d9a ("sfc: support RSS spreading of ethtool ntuple filters") Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
If some other operation gets the MCDI lock ahead of us and performs an MC reboot, then our attempt to insert the filter will fail with EINVAL, because the destination VI (spec->dmaq_id, MC_CMD_FILTER_OP_IN_RX_QUEUE) does not exist. But the caller's request (which might e.g. be an ethtool ntuple request from userland) isn't invalid, it just got unlucky; so return EAGAIN. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
With this change, the spinlock efx->filter_lock is no longer used and is thus removed. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
efx->filter_lock remains in place for use on farch, but EF10 now ignores it. EFX_EF10_FILTER_FLAG_BUSY is no longer needed, hence it is removed. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Instead of having an efx->type->filter_rfs_insert() method, just use workitems with a worker function that calls efx->type->filter_insert(). The only user of this is efx_filter_rfs(), which now queues a call to efx_filter_rfs_work(). Similarly, efx_filter_rfs_expire() is now a worker function called on a new channel->filter_work work_struct, so the method efx->type->filter_rfs_expire_one() is no longer called in atomic context. We also add a new mutex efx->rps_mutex to protect the RPS state (efx-> rps_expire_channel, efx->rps_expire_index, and channel->rps_flow_id) so that the taking of efx->filter_lock can be moved to efx->type->filter_rfs_expire_one(). Thus, all filter table functions are now called in a sleepable context, allowing them to use sleeping locks in a future patch. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Markman 提交于
Use relaxed I/O on the hot path. This achieves significant performance improvements. On a 10G link, this makes a basic iperf TCP test go from an average of 4.5 Gbits/sec to about 9.40 Gbits/sec. Signed-off-by: NYan Markman <ymarkman@marvell.com> [Maxime: Commit message, cosmetic changes] Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2018 24 次提交
-
-
由 Intiyaz Basha 提交于
Napi is checking Tx queue status and waking the Tx queue if required. Same operation is being done while freeing every Tx buffer. So removed the duplicate operation of checking Tx queue status from the Tx buffer free functions. Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:508:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxime Chevallier 提交于
Some helper functions that search for given entries in the TCAM filter on PPv2 controller make use of dynamically alloced temporary variables, allocated with GFP_KERNEL. These functions can be called in atomic context, and dynamic alloc is not really needed in these cases anyways. This commit gets rid of dynamic allocs and use stack allocation in the following functions, and where they're used : - mvpp2_prs_flow_find - mvpp2_prs_vlan_find - mvpp2_prs_double_vlan_find - mvpp2_prs_mac_da_range_find For all these functions, instead of returning an temporary object representing the TCAM entry, we simply return the TCAM id that matches the requested entry. Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxime Chevallier 提交于
The mvpp2_prs_hw_read function uses the 'index' field of the struct mvpp2_prs_entry to initialize the rest of the fields. This makes it unclear from a caller's perspective, who needs to manipulate a struct that is not entirely initialized. This commit makes it an init function for prs_entry, by passing it the index as a parameter. The function now zeroes the entry, and sets the index field before doing all other init from HW. The function is renamed 'mvpp2_prs_init_from_hw' to make that clear. Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Björn Töpel 提交于
The driver now acts upon the XDP_REDIRECT return action. Two new ndos are implemented, ndo_xdp_xmit and ndo_xdp_flush. XDP_REDIRECT action enables XDP program to redirect frames to other netdevs. Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Björn Töpel 提交于
This commit tweaks the page counting for XDP_REDIRECT to function properly. XDP_REDIRECT support will be added in a future commit. The current page counting scheme assumes that the reference count cannot decrease until the received frame is sent to the upper layers of the networking stack. This assumption does not hold for the XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have its reference count decreased via the xdp_do_redirect call. To work around that, we now start off by a large page count and then don't allow a refcount less than two. Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Remove the gaps created by the recent refactor of various feature flags that have moved to the state field. Use only a u32 now that we have fewer than 32 flags in the field. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Now that the only places which modify flags are either (a) during initialization prior to creating a netdevice, or (b) while holding the rtnl lock, we no longer need the cmpxchg64 call in i40e_set_priv_flags. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
When we suspend and resume, we need to clear and re-enable the interrupt scheme. This was previously not done while holding the RTNL lock, which could be problematic, because we are actually destroying and re-creating queues. Hold the RTNL lock for the entire sequence of preparing for reset, and when resuming. This additionally protects the flags related to interrupt scheme under RTNL lock so that their modification is properly threaded. This is part of a larger effort to remove the need for cmpxchg64 in i40e_set_priv_flags(). Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
The iWarp client flags are all potentially changed when the RTNL lock is not held, so they should not be part of the pf->flags variable. Instead, move them into the state field so that we can use atomic bit operations. This is part of a larger effort to remove cmpxchg64 in i40e_set_priv_flags() Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
This flag is modified outside of the RTNL lock and thus should not be part of the pf->flags variable. Use a state bit instead, so that we can use atomic bit operations. This is part of a larger effort to remove cmpxchg64 in i40e_set_priv_flags() Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Aviv Heller 提交于
We support outer VLAN offload in driver and HW regardless of whether an encapsulation is present in the next headers. Exposing this in hw_enc_features will allow us to offload outer VLANs in cases where encapsulation protocols like VXLAN and IPsec are used. Signed-off-by: NAviv Heller <avivh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Gal Pressman 提交于
Add a new macro to prevent copy-pasting the same code for each new feature. Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Gal Pressman 提交于
The function is used in en_main.c only, we can make it static and remove its declaration from en.h Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Gal Pressman 提交于
ethtool core code makes sure data isn't NULL before calling get_ethtool_stats, testing it again in the driver is redundant. Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Leon Romanovsky 提交于
The system with CONFIG_UBSAN enabled on produces the following error during driver initialization. The reason to it that max_reg_cmds can be larger enough to cause to "1 << max_reg_cmds" overflow the unsigned long. ================================================================================ UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1805:42 signed integer overflow: -2147483648 - 1 cannot be represented in type 'int' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00032-g06cda2358d9b-dirty #724 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f ? dma_virt_alloc+0x81/0x81 ubsan_epilogue+0xe/0x4e handle_overflow+0x187/0x20c mlx5_cmd_init+0x73a/0x12b0 mlx5_load_one+0x1c3d/0x1d30 init_one+0xd02/0xf10 pci_device_probe+0x26c/0x3b0 driver_probe_device+0x622/0xb40 __driver_attach+0x175/0x1b0 bus_for_each_dev+0xef/0x190 bus_add_driver+0x2db/0x490 driver_register+0x16b/0x1e0 __pci_register_driver+0x177/0x1b0 init+0x6d/0x92 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 ================================================================================ Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Currently, we are emulating the offload of vlan push/pop actions using global setup as done by commit f5f82476 ("net/mlx5: E-Switch, Support VLAN actions in the offloads mode"). With newer NICs, we can apply a flow action for that matter, do that while keeping the emulated path for the older HW brands. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Newer NICs (ConnectX-5 and onward) can apply vlan pop or push as an action taking place during flow steering. Add the core bits for that. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Align the checks for modify header and encap actions with the rest of the code. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Added the following packets drop counter: Rx interface down dropped packets - counts packets which were received while the ETH interface was down. This counter will be shown on ethtool as a new counter called rx_if_down_packets. The implementation allocates a q_counter for drop rq which gets all the received traffic while the interface is down. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Added the following packets dropped while vport down statistics: Rx dropped while vport down - counts packets which were steered by e-switch to a vport, but dropped since the vport was down. This counter will be shown on ip link tool as part of the vport rx_dropped counter. Tx dropped while vport down - counts packets which were transmitted by a vport, but dropped due to vport logical link down. This counter will be shown on ip link tool as part of the vport tx_dropped counter. The counters are read from FW by command QUERY_VNIC_ENV. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Added the following packets drop counter: Rx steering missed dropped packets - counts packets which were dropped due to miss on NIC rx steering rules. This counter will be shown on ethtool as a new counter called rx_steer_missed_packets. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Add support for new FW command QUERY_VNIC_ENV. The command is used by the driver to query vnic diagnostic statistics from FW. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Inbar Karmy 提交于
Implement set/get functions to configure PFC stall prevention timeout by tunables api through ethtool. By default the stall prevention timeout is configured to 8 sec. Timeout range is: 80-8000 msec. Enabling stall prevention with the auto timeout will set the timeout to 100 msec. Signed-off-by: NInbar Karmy <inbark@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-