Conflicts:
	net/xfrm/xfrm_policy.c

Minor merge conflict in xfrm_policy.c, consisting of overlapping
changes which were trivial to resolve.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is an extra semi-colon so bond_get_size() doesn't return the
correct value.

Fixes: ec76aa49 ('bonding: add Netlink support active_slave option')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NVeaceslav Falico <vfalico@redhat.com>
Reviewed-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bjørn Mork says:

====================
cdc_ncm: many small and mostly trivial fixes

This series ended up longer than expected, and it is still not
complete. There is more to come when time allows...

Most changes are trivial. Notable non-trivial changes are
 - removed filtering of identical speed notifications
 - tx_max calulation is changed to count the pad byte if
   necessary, and respect the device limit as an absolute
   upper limit even if it is too low according to the spec
 - remove the bug preventing SET_MAX_DATAGRAM_SIZE from having
   any effect
 - drop the pad-to-max if ZLPs are enabled
 - the driver specific VERSION is dropped
 - dev->hard_mtu is set to tx_max instead of max_datagram_size
   causing usbnet to calculate the qlen based on the real max
   size of tx skbs

This series has been tested, along with the previously posted
cdc_mbim series, on the NCM and MBIM devices I have:
 - Ericsson F5521gw (NCM)
 - Huawei E367 (MBIM)
 - D-Link DWM-156 A7 (MBIM w/ too low dwNtb{In,Out}MaxSize bug)
 - Sierra Wireless MC7710 (MBIM w/ ZLP and CDC Union bugs)

Apart from the D-Link modem dropping a lot less oversized
frames with the fix dedicated to it, there are no end user
noticable functional changes as a result of this series.  But
all the non-trivial changes I listed above are of course
detectable by users looking at that specific area (except maybe
the removed speed notification, which requires a device sending
duplicates to be noticable - I don't have any such device).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are MBIM devices out there reporting

  dwNtbInMaxSize=2048 dwNtbOutMaxSize=2048

and since the spec require a datagram max size of at least
2048, this means that a full sized datagram will never fit.

Still, sending larger NTBs than the device supports is not
going to help.  We do not have any other options than either
 a) refusing to bindi, or
 b) respect the insanely low value.

Alternative b will at least make these devices work, so go
for it.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make it a bit easier for users to figure out what goes
wrong when bind fails.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most setup errors are ignored to ensure maximum firmware
compatibilty.  But GET_NTB_PARAMETERS and the functional
descriptors are required.  Use proper error codes and
log level if these fail.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rewriting the "set max datagram" part of dc_ncm_setup to
separate the selection and validatation of the size from
the code which optionally informs the device of this
value.  This ensures that we use the correct value
regardless of device support for the get and set commands.

Removing some of the many indent levels while doing this
to make the code more readable.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Converting the constants used in these comparisons at build
time instead of converting the variables for every received
frame at run time.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These signatures are well known bit patterns, mostly made up
of ascii characters.  Mentally parsing works best if they
are printed in hex.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Take advantage of standard device name prefixing and
netdevice msglvl control where possible.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix cut'n'paste typo.  Log the bogus length and not the
irrelevant signature.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

usbnet use the hard_mtu value for sizing the tx queue and nothing
else.  We will be transmitting buffers of up to tx_max size, so
that's the proper value to give usbnet.

The individual datagram size is completely irrelevant here.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need to keep this code duplicated from usbnet.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions were merely wrappers around the usbnet
variants.  Remove them.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Padding NTBs to max size is part of the support for devices
optimizing their DMA transfers. This optimization depends on
max sized NTBs not being ZLP terminated. So we are much better
off dropping the padding if we are going to send a ZLP anyway.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The probed interface must be the master/control interface of the
function.  Make this explicit and simplify redundant tests.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

header_desc was completely unused and union_desc was never used
outside cdc_ncm_bind_common.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to inform the device about the *new* value, not the
old one.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving the call to cdc_ncm_setup() after the endpoint
setup removes the last remaining reference to ncm_parm
outside cdc_ncm_setup.

Collecting all the ncm_parm based calculations in
cdc_ncm_setup improves readability.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These fields are only used to prevent printing the same speeds
multiple times if we receive multiple identical speed notifications.

The value of these printk's is questionable, and even more so when
we filter out some of the notifications sent us by the firmware. If
we are going to print any of these, then we should print them all.

Removing little used fields is a bonus.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We already use the usbnet udev field everywhere this could have
been used.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Too many pointers back and forth are likely to confuse developers,
creating subtle bugs whenever we forget to syncronize them all.

As a usbnet driver, we should stick with the standard struct
usbnet fields as much as possible.  The netdevice is one such
field.

Cc: Greg Suarez <gsuarez@smithmicro.com>
Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need to duplicate stuff already in the common usbnet
struct.  We still need to keep our special find_endpoints
function because we need explicit control over the selected
altsetting.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is always a duplicate of the "control" field. It causes
confusion wrt intf_data updates and cleanups.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes it a lot easier to test modified versions

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can avoid the costly division for the common case where
we pad the frame to tx_max size as long as we ensure that
tx_max is either the device specified dwNtbOutMaxSize or not
a multiplum of wMaxPacketSize.

Using the preconverted 'maxpacket' field avoids converting
wMaxPacketSize to CPU endianness for every transmitted frame

And since we only will hit the one byte padding rule for short
frames, we can drop testing the skb for tailroom.

The change means that tx_max now represents the real maximum
skb size, enabling us to allocate the correct size instead of
always making room for one extra byte.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A number of devices in the wild have turned out to require ZLPs.
Even if this is a spec violation, our priority is to make any
device work as good as possible. Devices needing ZLPs will fail
to receive any full sized frame we send. On the other hand,
devices which do not need the ZLP will still work if we send
them.

This gives us no other option than sending ZLPs by default.

This will prevent devices conforming to the spec from making the
optimizations which are possible without ZLPs.  Adding known
such devices to a whitelist, to avoid the possible negative
impact of the new spec violating default.

Cc: Greg Suarez <gsuarez@smithmicro.com>
Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MBIM is a point-to-point protocol transporting raw IP packets
with no L2 headers. Only IPv4 and IPv6 are supported. ARP in
particular is not, which is quite logical given the lack of
L2 headers.

The driver still emulates an ethernet interface, dropping all
unsupported protocols, and avoiding neigbour resolving by
setting the IFF_NOARP flag.

The MBIM specification does not explicitly forbid IPv6 Neighbor
Discovery, and it seems the other OS support will respond to
Neighbor Solicitations on MBIM links. There are therefore
buggy devices out there, which despite the pointlessness, still
require Neighbor Discovery for IPv6 over MBIM.

This is incompatible with the IFF_NOARP flag which disables
both ARP and ND.  We cannot support ARP in any case, so we
have to keep that flag. This patch implements a workaround
for the buggy devices, letting the driver respond directly
to Neighbor Solicitations from the device.

This is not optimal, but will have minimal effect on any sane
device.

Cc: Greg Suarez <gsuarez@smithmicro.com>
Reported-and-tested-by: NThomas Schäfer <tschaefer@t-online.de>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some trailing whitespace.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some whitespace errors.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also fixes an incorrect function comment (probably copy/paste).
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some whitespace errors.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some whitespace errors.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
This series contains updates to e1000, igb, ixgbe and ixgbevf.

Hong Zhiguo provides a fix for e1000 where tx_ring and adapter->tx_ring
are already of type "struct e1000_tx_ring" so no need to divide by
e1000_tx_ring size in the idx calculation.

Emil provides a fix for ixgbevf to remove a redundant workaround related
to header split and a fix for ixgbe to resolve an issue where the MTA table
can be cleared when the interface is reset while in promisc mode.

Todd provides a fix for igb to prevent ethtool from writing to the iNVM
in i210/i211 devices.  This issue was reported by Marek Vasut <marex@denx.de>.

Anton Blanchard provides a fix for ixgbe to reduce memory consumption
with larger page sizes, seen on PPC.

Don provides a cleanup in ixgbe to replace the IXGBE_DESC_UNUSED macro with
the inline function ixgbevf_desc_unused() to make the logic a bit more
readable.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
A single fix by Alexandre Rames for the recent changes to TSO.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch resolves an issue where the MTA table can be cleared when the
interface is reset while in promisc mode. As result IPv6 traffic between
VFs will be interrupted.

This patch makes the update of the MTA table unconditional to avoid the
inconsistent clearing on reset.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch just replaces the IXGBE_DESC_UNUSED macro with a like named
inline function ixgbevf_desc_unused. The inline function makes the logic
a bit more readable.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>