Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debugobjects: Fix boot crash when kmemleak and debugobjects enabled

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  jump_label: Fix jump_label update for modules
  oprofile, x86: Fix race in nmi handler while starting counters

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Disable (revert) SCHED_LOAD_SCALE increase
  sched, cgroups: Fix MIN_SHARES on 64-bit boxen

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe it
  net: refine {udp|tcp|sctp}_mem limits
  vmxnet3: round down # of queues to power of two
  net: sh_eth: fix the parameter for the ETHER of SH7757
  net: sh_eth: fix cannot work half-duplex mode
  net: vlan: enable soft features regardless of underlying device
  vmxnet3: fix starving rx ring whenoc_skb kb fails
  bridge: Always flood broadcast packets
  greth: greth_set_mac_add would corrupt the MAC address.
  net: bind() fix error return on wrong address family
  natsemi: silence dma-debug warnings
  net: 8139too: Initial necessary vlan_features to support vlan
  Fix call trace when interrupts are disabled while sleeping function kzalloc is called
  qlge:Version change to v1.00.00.29
  qlge: Fix printk priority so chip fatal errors are always reported.
  qlge:Fix crash caused by mailbox execution on wedged chip.
  xfrm4: Don't call icmp_send on local error
  ipv4: Don't use ufo handling on later transformed packets
  xfrm: Remove family arg from xfrm_bundle_ok
  ipv6: Don't put artificial limit on routing table size.
  ...

We forgot to send up SCTP_SENDER_DRY_EVENT notification when
user app subscribes to this event, and there is no data to be
sent or retransmit.

This is required by the Socket API and used by the DTLS/SCTP
implementation.
Reported-by: NMichael Tüxen <Michael.Tuexen@lurchi.franken.de>
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Tested-by: NRobin Seggelmann <seggelmann@fh-muenster.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current tcp/udp/sctp global memory limits are not taking into account
hugepages allocations, and allow 50% of ram to be used by buffers of a
single protocol [ not counting space used by sockets / inodes ...]

Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram
per protocol, and a minimum of 128 pages.
Heavy duty machines sysadmins probably need to tweak limits anyway.


References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032Reported-by: Nstarlight <starlight@binnacle.cx>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vmxnet3 device supports only power-of-two number of queues. The driver
therefore needs to check this and rounds down the number of queues to the
nearest power of two.
Signed-off-by: NYong Wang <yongwang@vmware.com>
Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: NDmitry Torokhov <dtor@vmware.com>

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: add missing breaks in tps65910_gpio_init

All the blkio.throttle.* file names are incorrectly reported without
".throttle" in the documentation. Fix it.
Signed-off-by: NAndrea Righi <andrea@betterlinux.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The list of available general purpose memory allocators in
Documentation/CodingStyle chapter 14 is incomplete. This patch adds
the missing vzalloc() to the list.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move location of quilt series for kernel-doc patches.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (46 commits)
  [media] rc: call input_sync after scancode reports
  [media] imon: allow either proto on unknown 0xffdc
  [media] imon: auto-config ffdc 7e device
  [media] saa7134: fix raw IR timeout value
  [media] rc: fix ghost keypresses with certain hw
  [media] [staging] lirc_serial: allocate irq at init time
  [media] lirc_zilog: fix spinning rx thread
  [media] keymaps: fix table for pinnacle pctv hd devices
  [media] ite-cir: 8709 needs to use pnp resource 2
  [media] V4L: mx1-camera: fix uninitialized variable
  [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation
  [media] OMAP_VOUT: Change hardcoded device node number to -1
  [media] OMAP_VOUTLIB: Fix wrong resizer calculation
  [media] uvcvideo: Disable the queue when failing to start
  [media] uvcvideo: Remove buffers from the queues when freeing
  [media] uvcvideo: Ignore entities for terminals with no supported format
  [media] v4l: Don't access media entity after is has been destroyed
  [media] media: omap3isp: fix a potential NULL deref
  [media] media: vb2: fix allocation failure check
  [media] media: vb2: reset queued_count value during queue reinitialization
  ...

Fix up trivial conflict in MAINTAINERS as per Mauro

The shdr4extnum variable isn't being freed in the cleanup process of
elf_fdpic_core_dump().
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provides the ability to resize a resource that is already allocated.
This functionality is put in place to support reallocation needs of
pci resources.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

locks_alloc_lock() assumed that the allocated struct file_lock is
already initialized to zero members.  This is only true for the first
allocation of the structure, after reuse some of the members will have
random values.

This will for example result in passing random fl_start values to
userspace in fuse for FL_FLOCK locks, which is an information leak at
best.

Fix by reinitializing those members which may be non-zero after freeing.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the driver didn't set this parameter on the ETHER, the CPU will
encounter the "data address error" exception.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When link was down, the bit of DM in ECMR was always set.
So, we could not use half-duplex mode on the controller.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix regression occurring during device removal
  USB: fsl_udc_core: fix build breakage when building for ARM arch

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Add Makefile and Kconfig Entries for tps65911 comparator
  mfd: Fix build error for tps65911-comparator.c
  Revert "mfd: Add omap-usbhs runtime PM support"
  input: pmic8xxx-pwrkey: Do not use mfd_get_data()
  input: pmic8xxx-keypad: Do not use mfd_get_data()

If gso/gro feature of underlying device is turned off，
then new created vlan device never can turn gso/gro on. 

Although underlying device don't support TSO, we still
should use software segments for vlan device.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the rx ring is completely empty, then the device may never fire an rx
interrupt. Unfortunately, the rx interrupt is what triggers populating the
rx ring with fresh buffers, so this will cause networking to lock up.

This patch replenishes the skb in recv descriptor as soon as it is
peeled off while processing rx completions. If the skb/buffer
allocation fails, existing one is recycled and the packet in hand is
dropped. This way none of the RX desc is ever left empty, thus avoiding
starvation
Signed-off-by: NScott J. Goldman <scottjg@vmware.com>
Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As is_multicast_ether_addr returns true on broadcast packets as
well, we need to explicitly exclude broadcast packets so that
they're always flooded.  This wasn't an issue before as broadcast
packets were considered to be an unregistered multicast group,
which were always flooded.  However, as we now only flood such
packets to router ports, this is no longer acceptable.
Reported-by: NMichael Guntsche <mike@it-loops.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix sync and dio writes across stripe boundaries
  libceph: fix page calculation for non-page-aligned io
  ceph: fix page alignment corrections

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:
  hfsplus: Fix double iput of the same inode in hfsplus_fill_super()
  hfsplus: add missing call to bio_put()

Alex reported that commit c8b28116 ("sched: Increase
SCHED_LOAD_SCALE resolution") caused a power usage regression
under light load as it increases the number of load-balance
operations and keeps idle cpus from staying idle.

Time has run out to find the root cause for this release so
disable the feature for v3.0 until we can figure out what
causes the problem.
Reported-by: N"Alex, Shi" <alex.shi@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-m4onxn0sxnyn5iz9o88eskc3@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Base on Mark's comment [1], I make the Kconfig entry invisible to users.
[1] https://lkml.org/lkml/2011/5/14/136Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Fix below build error:
  CC      drivers/mfd/tps65911-comparator.o
drivers/mfd/tps65911-comparator.c: In function 'tps65911_comparator_probe':
drivers/mfd/tps65911-comparator.c:131: error: 'struct tps65910_platform_data' has no member named 'vmbch_threshold'
drivers/mfd/tps65911-comparator.c:137: error: 'struct tps65910_platform_data' has no member named 'vmbch2_threshold'
make[2]: *** [drivers/mfd/tps65911-comparator.o] Error 1
make[1]: *** [drivers/mfd] Error 2
make: *** [drivers] Error 2
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This reverts commit 7e6502d5.

Oops are produced during initialization of ehci and ohci
drivers. This is because the run time pm apis are used by
the driver but the corresponding hwmod structures and
initialization is not merged. hence revering  back the
commit id 7e6502d5Signed-off-by: NKeshava Munegowda <keshava_mgowda@ti.com>
Reported-by: NLuciano Coelho <coelho@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The MAC address was set using the signed char sockaddr->sa_addr
field and thus the address could be corrupted through sign extension.
Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hi,

Reinhard Max also pointed out that the error should EAFNOSUPPORT according
to POSIX.

The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use
EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN.

Other protocols error values in their af bind() methods in current mainline git as far
as a brief look shows:
	EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc
	EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25,
	No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip

Ciao, Marcus
Signed-off-by: NMarcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (277 commits)
  [SCSI] isci: fix checkpatch errors
  isci: Device reset should request sas_phy_reset(phy, true)
  isci: pare back error messsages
  isci: cleanup silicon revision detection
  isci: merge scu_unsolicited_frame.h into unsolicited_frame_control.h
  isci: merge sata.[ch] into request.c
  isci: kill 'get/set' macros
  isci: retire scic_sds_ and scic_ prefixes
  isci: unify isci_host and scic_sds_controller
  isci: unify isci_remote_device and scic_sds_remote_device
  isci: unify isci_port and scic_sds_port
  isci: fix scic_sds_remote_device_terminate_requests
  isci: unify isci_phy and scic_sds_phy
  isci: unify isci_request and scic_sds_request
  isci: rename / clean up scic_sds_stp_request
  isci: preallocate requests
  isci: combine request flags
  isci: unify can_queue tracking on the tci_pool, uplevel tag assignment
  isci: Terminate dev requests on FIS err bit rx in NCQ
  isci: fix frame received locking
  ...

* 'at91/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc:
  AT91: Change nand buswidth logic to match hardware default configuration
  at91: Use "pclk" as con_id on at91cap9 and at91rm9200
  at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl
  atmel_serial: fix internal port num
  at91: fix at91_set_serial_console: use platform device id

Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x:
  vesafb: fix memory leak
  fbdev: amba: Link fb device to its parent
  fsl-diu-fb: remove check for pixel clock ranges
  udlfb: Correct sub-optimal resolution selection.
  hecubafb: add module_put on error path in hecubafb_probe()
  sm501fb: fix section mismatch warning
  gx1fb: Fix section mismatch warnings
  fbdev: sh_mobile_meram: Correct pointer check for YCbCr chroma plane

Commits 71c29bd5 ("IB/uverbs: Add devnode method to set path/mode")
and c3af0980 ("IB: Add devnode methods to cm_class and umad_class")
added devnode methods that set the mode.

However, these methods don't check for a NULL mode, and so we get a
crash when unloading modules because devtmpfs_delete_node() calls
device_get_devnode() with mode == NULL.

Add the missing checks.
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.de>
[ Also fix cm.c.  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recently modified nand buswitth configuration is not aligned with
board reality: the double footprint on boards is always populated with 8bits
buswidth nand flashes.
So we have to consider that without particular configuration the 8bits
buswidth is selected by default.
Moreover, the previous logic was always using !board_have_nand_8bit(), we
change it to a simpler: board_have_nand_16bit().
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

When releasing framebuffer, free colourmap allocations.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This silences dma-debug warnings:

https://lkml.org/lkml/2011/6/30/341

------------[ cut here ]------------
WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820
check_unmap+0x1fe/0x56a()
natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with
different size [device address=0x0000000006ef0040] [map size=1538
bytes] [unmap size=1522 bytes]
Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio
scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6
cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd
usbcore sc1200 ide_core
Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95e #1
Call Trace:
 [<c011a556>] warn_slowpath_common+0x4a/0x5f
 [<c02565cb>] ? check_unmap+0x1fe/0x56a
 [<c011a5cf>] warn_slowpath_fmt+0x26/0x2a
 [<c02565cb>] check_unmap+0x1fe/0x56a
 [<c0256aaa>] debug_dma_unmap_page+0x53/0x5b
 [<c029d6cd>] pci_unmap_single+0x4d/0x57
 [<c029ea0a>] natsemi_poll+0x343/0x5ca
 [<c0116f41>] ? try_to_wake_up+0xea/0xfc
 [<c0122416>] ? spin_unlock_irq.clone.28+0x18/0x23
 [<c02d4667>] net_rx_action+0x3f/0xe5
 [<c011e35e>] __do_softirq+0x5b/0xd1
 [<c011e303>] ? local_bh_enable+0xa/0xa
 <IRQ>  [<c011e54b>] ? irq_exit+0x34/0x75
 [<c01034b9>] ? do_IRQ+0x66/0x79
 [<c034e869>] ? common_interrupt+0x29/0x30
 [<c0115ed0>] ? finish_task_switch.clone.118+0x31/0x72
 [<c034cb92>] ? schedule+0x3b2/0x3f1
 [<c012f4b0>] ? hrtimer_start_range_ns+0x10/0x12
 [<c012f4ce>] ? hrtimer_start_expires+0x1c/0x24
 [<c034d5aa>] ? schedule_hrtimeout_range_clock+0x8e/0xb4
 [<c012ed27>] ? update_rmtp+0x68/0x68
 [<c034d5da>] ? schedule_hrtimeout_range+0xa/0xc
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c017b051>] ? do_select+0x488/0x4cd
 [<c0115ee2>] ? finish_task_switch.clone.118+0x43/0x72
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c017a99e>] ? poll_freewait+0x74/0x74
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c034cbc1>] ? schedule+0x3e1/0x3f1
 [<c011e55e>] ? irq_exit+0x47/0x75
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a
 [<c034dd1e>] ? need_resched+0x17/0x19
 [<c024bc12>] ? put_dec_full+0x7b/0xaa
 [<c0240060>] ? blkdev_ioctl+0x434/0x618
 [<c024bc70>] ? put_dec+0x2f/0x6d
 [<c024c6a5>] ? number.clone.1+0x10b/0x1d0
 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a
 [<c034dd1e>] ? need_resched+0x17/0x19
 [<c024d046>] ? vsnprintf+0x225/0x264
 [<c024cea0>] ? vsnprintf+0x7f/0x264
 [<c018346f>] ? seq_printf+0x22/0x40
 [<c01a2fcc>] ? do_task_stat+0x582/0x5a3
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c017b1b5>] ? core_sys_select+0x11f/0x1a3
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c01a34a1>] ? proc_tgid_stat+0xd/0xf
 [<c012357c>] ? recalc_sigpending+0x32/0x35
 [<c0123b9c>] ? __set_task_blocked+0x64/0x6a
 [<c011dfb0>] ? timespec_add_safe+0x24/0x48
 [<c0123449>] ? spin_unlock_irq.clone.16+0x18/0x23
 [<c017b3a1>] ? sys_pselect6+0xe5/0x13e
 [<c034dd65>] ? syscall_call+0x7/0xb
 [<c0340000>] ? rpc_clntdir_depopulate+0x26/0x30
---[ end trace 180dcac41a50938b ]---
Reported-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Offload setting of vlan device requires
vlan_features to be initialized.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>